Analyzing smart meter data to understand energy consumption patterns helps utilities and energy providers perform customized demand response operations. Existing energy consumption segmentation techniques use assumptions that could result in reduced quality of clusters in representing their members. We address this limitation by introducing a two-stage clustering method that more accurately captures load shape temporal patterns and peak demands. In the first stage, load shapes are clustered by allowing a large number of clusters to accurately capture variations in energy use patterns and cluster centroids are extracted by accounting for shape misalignments. In the second stage, clusters of similar centroid and power magnitude range are merged by using Dynamic Time Warping. We used three datasets consisting of ~250 households (~15000 profiles) to demonstrate the performance improvement, compared to baseline methods, and discuss the impact on energy management.
In this paper, a balanced energy consumption clustering algorithm (BECC) is proposed. This new scheme is a cluster-based algorithm designed for heterogeneous energy wireless sensor networks. A polarized energy factor is introduced to adjust the probability with which each node may become a cluster head in the election of the new clustering scheme. Under the condition that the expected number of cluster heads in the network preserves the theoretical optimal number, BECC makes sure that nodes with higher residual energy will become cluster heads with higher probabilities while nodes with lower r…
FPGA Implementation of Complex Value-based Clustering Filter for Chromatic Dispersion Compensation in Coherent Metro Links with Ultra-low Power Consumption
University of Michigan（密歇根大学）；Argonne National Laboratory（阿贡国家实验室）；George Mason University（乔治梅森大学）
Shared Mobility-on-Demand using automated vehicles can reduce energy consumption and cost for future mobility. However, its full potential in energy saving has not been fully explored. An algorithm to minimize fleet fuel consumption while satisfying customers travel time constraints is developed in this paper. Numerical simulations with realistic travel demand and route choice are performed, showing that if fuel consumption is not considered, the MOD service can increase fleet fuel consumption due to increased empty vehicle mileage. With fuel consumption as part of the cost function, we can re…
Large-scale deployment of smart meters has made it possible to collect sufficient and high-resolution data of residential electric demand profiles. Clustering analysis of these profiles is important to further analyze and comment on electricity consumption patterns. Although many clustering techniques have been proposed in the literature over the years, it is often noticed that different techniques fit best for different datasets. To identify the most suitable technique, standard clustering validity indices are often used. These indices focus primarily on the intrinsic characteristics of the c…
In the Smart Grid environment, the advent of intelligent measuring devices facilitates monitoring appliance electricity consumption. This data can be used in applying Demand Response (DR) in residential houses through data analytics, and developing data mining techniques. In this research, we introduce a smart system foundation that is applied to user's disaggregated power consumption data. This system encourages the users to apply DR by changing their behaviour of using heavier operation modes to lighter modes, and by encouraging users to shift their usages to off-peak hours. First, we apply …
Sustainability requires increased energy efficiency with minimal waste. The future power systems should thus provide high levels of flexibility iin controling energy consumption. Precise projections of future energy demand/load at the aggregate and on the individual site levels are of great importance for decision makers and professionals in the energy industry. Forecasting energy loads has become more advantageous for energy providers and customers, allowing them to establish an efficient production strategy to satisfy demand. This study introduces two hybrid cascaded models for forecasting m…
This paper presents the geometrical representation of the load demand by using orbits diagrams in the Mandelbrot set, to identify changing behaviors during a day period of the real and reactive powers. To perform this, different power combinations were used to represent the fractal diagrams with an algorithm that considers the mathematical model of Mandelbrot set and orbits diagrams. A qualitative analysis of the orbits is performed to identify the fractal graphic patterns with respect to the real and reactive power consumptions. The results show repetitive graphic patterns in the fractal spac…
In a power system, the load demand considers two components such as the real power (P) because of resistive elements, and the reactive power (Q) because inductive or capacitive elements. This paper presents a graphical representation of the electric power demand based on the topological properties of the Julia Sets, with the purpose of observing the different graphic patterns and relationship with the hourly load consumptions. An algorithm that iterates complex numbers related to power is used to represent each fractal diagram of the load demand. The results show some representative patterns r…
EDF R&D（法国电力集团研发部）；Laboratoire de mathématiques d’Orsay（奥赛数学实验室）；Université Paris-Sud（巴黎南大学）；CNRS（法国国家科学研究中心）；Université Paris-Saclay（巴黎萨克雷大学）；INRIA（法国国家信息与自动化研究所）；Département d’Informatique de l’École Normale Supérieure（巴黎高等师范学院计算机系）；PSL Research University（巴黎文理研究大学）；INESC Technology and Science (INESC TEC)（INESC科技与科学研究所（INESC TEC））
The implementation of efficient demand response (DR) programs for household electricity consumption would benefit from data-driven methods capable of simulating the impact of different tariffs schemes. This paper proposes a novel method based on conditional variational autoencoders (CVAE) to generate, from an electricity tariff profile combined with exogenous weather and calendar variables, daily consumption profiles of consumers segmented in different clusters. First, a large set of consumers is gathered into clusters according to their consumption behavior and price-responsiveness. The clust…
Norwegian University of Science and Technology（挪威科技大学）；KWR Water Cycle Research Institute（KWR水循环研究所）；University of Cincinnati（辛辛那提大学）；Leiden University（莱顿大学）；Delft University of Technology（代尔夫特理工大学）
Socio-economic characteristics are influencing the temporal and spatial variability of water demand - the biggest source of uncertainties within water distribution system modeling. Improving our knowledge on these influences can be utilized to decrease demand uncertainties. This paper aims to link smart water meter data to socio-economic user characteristics by applying a novel clustering algorithm that uses dynamic time warping on daily demand patterns. The approach is tested on simulated and measured single family home datasets. We show that the novel algorithm performs better compared to co…
With the evolution of power systems as it is becoming more intelligent and interactive system while increasing in flexibility with a larger penetration of renewable energy sources, demand prediction on a short-term resolution will inevitably become more and more crucial in designing and managing the future grid, especially when it comes to an individual household level. Projecting the demand for electricity for a single energy user, as opposed to the aggregated power consumption of residential load on a wide scale, is difficult because of a considerable number of volatile and uncertain factors…
Terahertz (THz) band communication has been widely studied to meet the future demand for ultra-high capacity. In addition, multi-input multi-output (MIMO) technique and non-orthogonal multiple access (NOMA) technique with multi-antenna also enable the network to carry more users and provide multiplexing gain. In this paper, we study the maximization of energy efficiency (EE) problem in THz-NOMA-MIMO systems for the first time. And the original optimization problem is divided into user clustering, hybrid precoding and power optimization. Based on channel correlation characteristics, a fast conv…
High demands for industrial networks lead to increasingly large sensor networks. However, the complexity of networks and demands for accurate data require better stability and communication quality. Conventional clustering methods for ad-hoc networks are based on topology and connectivity, leading to unstable clustering results and low communication quality. In this paper, we focus on two situations: time-evolving networks, and multi-channel ad-hoc networks. We model ad-hoc networks as graphs and introduce community detection methods to both situations. Particularly, in time-evolving networks,…
District energy systems can not only reduce energy consumption but also set energy supply dispatching schemes according to demand. In this paper, the combined cooling heating and power economic emission dispatch (CCHPEED) model is established with the objective of economic cost, primary energy consumption, and pollutant emissions, as well as three decision-making strategies, are proposed to meet the demand for energy supply. Besides, a generalized differential evolution with the best compromise solution processing mechanism (BCS-GDE) is proposed to solve the model, also, the best compromise so…
With the ongoing integration of Renewable Energy Sources (RES), the complexity of power grids is increasing. Due to the fluctuating nature of RES, ensuring the reliability of power grids can be challenging. One possible approach for addressing these challenges is Demand Response (DR) which is described as matching the demand for electrical energy according to the changes and the availability of supply. However, implementing a DR system to monitor and control a broad set of electrical appliances in real-time introduces several new complications, including ensuring the reliability and financial …
