Prior to the advent of the cloud, storage and processing services were accommodated by specialized hardware, however, this approach introduced a number of challenges in terms of scalability, energy efficiency, and cost. Then came the concept of cloud computing, where to some extent, the issue of massive storage and computation was dealt with by centralized data centers that are accessed via the core network. The cloud has remained with us thus far, however, this has introduced further challenges among which, latency and energy efficiency are of the pinnacle. With the increase in embedded devices intelligence came the concept of the Fog. The availability of massive numbers of storage and computational devices at the edge of the network, where some are owned and deployed by the end-users themselves but most by service operators. This means that cloud services are pushed further out from the core towards the edge of the network, hence reduced latency is achieved. Fog nodes are massively distributed in the network, some benefit from wired connections, and others are connected via wireless links. The question of where to allocate services remains an important task and requires extensive attention. This chapter introduces and evaluates cloud fog architectures in 6G networks paying special attention to latency, energy efficiency, scalability, and the trade-offs between distributed and centralized processing resources.
This paper investigates distributed processing in Vehicular Edge Cloud (VECs), where a group of vehicles in a car park, at a charging station or at a road traffic intersection, cluster and form a temporary vehicular cloud by combining their computational resources in the cluster. We investigated the problem of energy efficient processing task allocation in VEC by developing a Mixed Integer Linear Programming (MILP) model to minimize power consumption by optimizing the allocation of different processing tasks to the available network resources, cloud resources, fog resources and vehicular proce…
Recent advances in mobile technologies and cloud computing services have inspired the development of cloud-based real-time health monitoring systems. However, the transfer of health-related data to the cloud contributes to the burden on the networking infrastructures, leading to high latency and increased power consumption. Fog computing is introduced to relieve this burden by bringing services to the users proximity. This study proposes a new fog computing architecture for health monitoring applications based on a Gigabit Passive Optical Network (GPON) access network. An Energy-Efficient Fog …
Deep Neural Networks (DNNs) have served as a catalyst in introducing a plethora of next-generation services in the era of Internet of Things (IoT), thanks to the availability of massive amounts of data collected by the objects on the edge. Currently, DNN models are used to deliver many Artificial Intelligence (AI) services that include image and natural language processing, speech recognition, and robotics. Accordingly, such services utilize various DNN models that make it computationally intensive for deployment on the edge devices alone. Thus, most AI models are offloaded to distant cloud da…
Massive amounts of data are expected to be generated by the billions of objects that form the Internet of Things (IoT). A variety of automated services such as monitoring will largely depend on the use of different Machine Learning (ML) algorithms. Traditionally, ML models are processed by centralized cloud data centers, where IoT readings are offloaded to the cloud via multiple networking hops in the access, metro, and core layers. This approach will inevitably lead to excessive networking power consumptions as well as Quality-of-Service (QoS) degradation such as increased latency. Instead, i…
Because of its usefulness in various fields including as safety applications, traffic control applications, and entertainment applications, VANET is an essential topic that is now being investigated intensively. VANET confronts numerous challenges in terms of reaction time, storage capacity, and reliability, particularly in real-time applications. As a result, merging cloud computing and cloud computing has recently been researched. The goal of this study is to develop a system that merges the fog and cloud layers into a single layer known as the included fog-cloud layer. To lower the time it …
Unmanned Aerial Vehicles (UAVs) are poised to play a central role in revolutionizing future services offered by the envisioned smart cities, thanks to their agility, flexibility, and cost-efficiency. UAVs are being widely deployed in different verticals including surveillance, search and rescue missions, delivery of items, and as an infrastructure for aerial communications in future wireless networks. UAVs can be used to survey target locations, collect raw data from the ground (i.e., video streams), generate computing task(s) and offload it to the available servers for processing. In this wor…
With the pervasiveness of IoT devices, smart-phones and improvement of location-tracking technologies huge volume of heterogeneous geo-tagged (location specific) data is generated which facilitates several location-aware services. The analytics with this spatio-temporal (having location and time dimensions) datasets provide varied important services such as, smart transportation, emergency services (health-care, national defence or urban planning). While cloud paradigm is suitable for the capability of storage and computation, the major bottleneck is network connectivity loss. In time-critical…
As vehicles playing an increasingly important role in people's daily life, requirements on safer and more comfortable driving experience have arisen. Connected vehicles (CVs) can provide enabling technologies to realize these requirements and have attracted widespread attentions from both academia and industry. These requirements ask for a well-designed computing architecture to support the Quality-of-Service (QoS) of CV applications. Computation offloading techniques, such as cloud, edge, and fog computing, can help CVs process computation-intensive and large-scale computing tasks. Additional…
Recent years have witnessed a remarkable development in communication and computing systems, mainly driven by the increasing demands of data and processing intensive applications such as virtual reality, M2M, connected vehicles, IoT services, to name a few. Massive amounts of data will be collected by various mobile and fixed terminals that will need to be processed in order to extract knowledge from the data. Traditionally, a centralized approach is taken for processing the collected data using large data centers connected to a core network. However, due to the scale of the Internet-connected…
Digital Twin systems are designed as two interconnected mirrored spaces, one real and one virtual, each reflecting the other, sharing information, and making predictions based on analysis and simulations. The correct behavior of a real-time Digital Twin depends not only on the logical results of computation but also on the timing constraints. To cope with the large amounts of data that need to be stored and analyzed, modern large scale Digital Twin deployments often rely on cloud-based architectures. A significant portion of the overall response time of a Digital Twin is spent on moving data f…
Mobile edge computing and fog computing are promising techniques providing computation service closer to users to achieve lower latency. In this work, we study the optimal offloading strategy in the three-tier federated computation offloading system. We first present queueing models and closed-form solutions for computing the service delay distribution and the probability of the delay of a task exceeding a given threshold. We then propose an optimal offloading probability algorithm based on the sub-gradient method. Our numerical results show that our simulation results match very well with tha…
Fog computing is an architecture that is used to distribute resources such as computing, storage, and memory closer to end-user to improve applications and service deployment. The idea behind fog computing is to improve cloud computing and IoT infrastructures by reducing compute power, network bandwidth, and latency as well as storage requirements. This paper presents an overview of what fog computing is, related concepts, algorithms that are present to improve fog computing infrastructure as well as challenges that exist. This paper shows that there is a great advantage of using fog computing…
In this paper, an energy efficient passive optical network (PON) architecture is proposed for backhaul connectivity in indoor visible light communication (VLC) systems. The proposed network is used to support a fog computing architecture allowing users with processing demands to access dedicated fog nodes and idle processing resources in other user devices within a building. The fog resources within a building complement fog nodes at higher layers of the access and metro networks and the central cloud data center. A mixed integer linear programming (MILP) model is developed to minimize the tot…
The huge amount of data generated by the Internet of things (IoT) devices needs the computational power and storage capacity provided by cloud, edge, and fog computing paradigms. Each of these computing paradigms has its own pros and cons. Cloud computing provides enhanced data storage and computing power but causes high communication latency. Edge and fog computing provide similar services with lower latency but with limited capacity, capability, and coverage. A single computing paradigm cannot fulfil all the requirements of IoT devices and a federation between them is needed to extend their …
This paper describes the efficient method of fogging in Tensai Gothalo. Tensai Gothalo is a novel dynamic router device developed in Gautam-Asami Laboratory of Wakkanai Hokusei Gakuen University which has sensing, actuating, monitoring and movable capability. Similarly, fogging is a new concept of cloud computing at which the data plane is defined in user device. In this paper we would like to present the stepwise explanation about how to fog in Tensai Gothalo. Furthermore, we will elaborate a technique to decentralize data with improvement in QoS and reducing latency without affecting the leg…
This paper introduces the Virtual Sensor Middleware (VSM), which facilitates distributed sensor data processing on multiple fog nodes. VSM uses a Virtual Sensor as the core component of the middleware. The virtual sensor concept is redesigned to support functionality beyond sensor/device virtualization, such as deploying a set of virtual sensors to represent an IoT application and distributed sensor data processing across multiple fog nodes. Furthermore, the virtual sensor deals with the heterogeneous nature of IoT devices and the various communication protocols using different adapters to com…
This work presents a comparative evaluation of four population-based optimization algorithms for workflow scheduling in cloud-fog environments. These algorithms are as follows: Particle Swarm Optimization (PSO), Genetic Algorithm (GA), Differential Evolution (DE) and GA-PSO. This work also provides the motivational groundwork for the weighted sum objective function for the workflow scheduling problem and develops this function based on three objectives: makespan, cost and energy. The recently proposed FogWorkflowSim is used as the simulation environment with the aforementioned objectives servi…
University of California, Berkeley（加利福尼亚大学伯克利分校）；Robert Bosch Research and Technology Center North America（罗伯特·博世北美研究与技术中心）；Carnegie Mellon University（卡内基梅隆大学）
EcoMobiFog -- Design and Dynamic Optimization of a 5G Mobile-Fog-Cloud Multi-Tier Ecosystem for the Real-Time Distributed Execution of Stream Applications
