Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. We present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges, as well as possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack. Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G eco-system will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands; and provide a unique perspective on the physical, as well as higher layer challenges relating to the design of next generation core networks, new modulation and coding methods, novel multiple access techniques, antenna arrays, wave propagation, radio-frequency transceiver design, as well as real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future that serves as a major source of latency for time-sensitive applications. While evaluating the strengths and weaknesses of key 6G technologies, we differentiate what may be achievable over the next decade, relative to what is possible.
Reconfigurable intelligent surfaces (RISs) are regarded as a promising emerging hardware technology to improve the spectrum and energy efficiency of wireless networks by artificially reconfiguring the propagation environment of electromagnetic waves. Due to the unique advantages in enhancing wireless channel capacity, RISs have recently become a hot research topic. In this article, we focus on three fundamental physical-layer challenges for the incorporation of RISs into wireless networks, namely, channel state information acquisition, passive information transfer, and low-complexity robust sy…
Many emerging technologies, such as ultra-massive multiple-input multiple-output (UM-MIMO), terahertz (THz) communications are under active discussion as promising technologies to support the extremely high access rate and superior network capacity in the future sixth-generation (6G) mobile communication systems. However, such technologies are still facing many challenges for practical implementation. In particular, UM-MIMO and THz communication require extremely large number of radio frequency (RF) chains, and hence suffering from prohibitive hardware cost and complexity. In this article, we …
5G wireless communications technology is being launched, with many smart applications being integrated. However, 5G specifications merge the requirements of new emerging technologies forcefully. These include data rate, capacity, latency, reliability, resources sharing, and energy/bit. To meet these challenging demands, research is focusing on 6G wireless communications enabling different technologies and emerging new applications. In this report, the latest research work on 6G technologies and applications is summarized, and the associated research challenges are discussed.
Broadband access is key to ensuring robust economic development and improving quality of life. Unfortunately, the communication infrastructure deployed in rural areas throughout the world lags behind its urban counterparts due to low population density and economics. This article examines the motivations and challenges of providing broadband access over vast rural regions, with an emphasis on the wireless aspect in view of its irreplaceable role in closing the digital gap. Applications and opportunities for future rural wireless communications are discussed for a variety of areas, including re…
The advent of the wireless communications systems augurs new cutting-edge technologies, including self-driving vehicles, unmanned aerial systems, autonomous robots, Internet-of-Things, and virtual reality. These technologies require high data rates, ultra-low latency, and high reliability, all of which are promised by the fifth generation of wireless communication systems (5G). Many research groups state that 5G cannot meet its demands without artificial intelligence (AI) integration as 5G wireless networks are expected to generate unprecedented traffic giving wireless research designers acces…
In this paper, we give a systematic description of the 1st Wireless Communication Artificial Intelligence (AI) Competition (WAIC) which is hosted by IMT-2020(5G) Promotion Group 5G+AI Work Group. Firstly, the framework of full channel state information (F-CSI) feedback problem and its corresponding channel dataset are provided. Then the enhancing schemes for DL-based F-CSI feedback including i) channel data analysis and preprocessing, ii) neural network design and iii) quantization enhancement are elaborated. The final competition results composed of different enhancing schemes are presented. …
The requirements in terms of service quality such as data rate, latency, power consumption, number of connectivity of future fifth-generation (5G) communication is very high. Moreover, in Internet of Things (IoT) requires massive connectivity. Optical wireless communication (OWC) technologies such as visible light communication, light fidelity, optical camera communication, and free space optical communication can effectively serve for the successful deployment of 5G and IoT. This paper clearly presents the contributions of OWC networks for 5G and IoT solutions.
Late visions and trends for the future sixth Generation (6G) of wireless communications advocate, among other technologies, towards the deployment of network nodes with extreme numbers of antennas and up to terahertz frequencies, as means to enable various immersive applications. However, these technologies impose several challenges in the design of radio-frequency front-ends and beamforming architectures, as well as of ultra-wideband waveforms and computationally efficient transceiver signal processing. In this article, we revisit the Time Reversal (TR) technique, which was initially experime…
Recently there has been a flurry of research on the use of reconfigurable intelligent surfaces (RIS) in wireless networks to create smart radio environments. In a smart radio environment, surfaces are capable of manipulating the propagation of incident electromagnetic waves in a programmable manner to actively alter the channel realization, which turns the wireless channel into a controllable system block that can be optimized to improve overall system performance. In this article, we provide a tutorial overview of reconfigurable intelligent surfaces (RIS) for wireless communications. We descr…
Wireless edge is about distributing intelligence to the wireless devices wherein the distribution of accurate time reference is essential for time-critical machine-type communication (cMTC). In 5G-based cMTC, enabling time synchronization in the wireless edge means moving beyond the current synchronization needs and solutions in 5G radio access. In this article, we analyze the device-level synchronization needs of potential cMTC applications: industrial automation, power distribution, vehicular communication, and live audio/video production. We present an over-the-air (OTA) synchronization sch…
There is a growing interest in the wireless communications community to complement the traditional model-based design approaches with data-driven machine learning (ML)-based solutions. While conventional ML approaches rely on the assumption of having the data and processing heads in a central entity, this is not always feasible in wireless communications applications because of the inaccessibility of private data and large communication overhead required to transmit raw data to central ML processors. As a result, decentralized ML approaches that keep the data where it is generated are much mor…
Both unmanned aerial vehicles (UAVs) and intelligent reflecting surfaces (IRS) are gaining traction as transformative technologies for upcoming wireless networks. The IRS-aided UAV communication, which introduces IRSs into UAV communications, has emerged in an effort to improve the system performance while also overcoming UAV communication constraints and issues. The purpose of this paper is to provide a comprehensive overview of IRSassisted UAV communications. First, we provide five examples of how IRSs and UAVs can be combined to achieve unrivaled potential in difficult situations. The techn…
Unmanned aerial vehicle (UAV) wireless communications have experienced an upsurge of interest in both military and civilian applications, due to its high mobility, low cost, on-demand deployment, and inherent line-of-sight (LoS) air-to-ground channels. However, these benefits also make UAV wireless communication systems vulnerable to malicious eavesdropping attacks. In this article, we aim to examine the physical layer security issues in UAV systems. In particular, passive and active eavesdroppings are two primary attacks in UAV systems. We provide an overview on emerging techniques, such as t…
Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming that the devices are located in the far-field region of the power radiating antenna, resulting in a relatively low energy transfer efficiency. However, with the transition of 6G systems to mmWave frequ…
Reconfigurable meta-surfaces are emerging as a novel and revolutionizing technology to enable intelligent wireless environments. Due to the low cost, improved efficiency, and passive nature of reflecting elements, it is becoming possible to program and control the wireless environment. Since wireless physical layer technologies can generally adapt to the wireless environment, their combination with reconfigurable surfaces and deep learning approaches can open new avenues for achieving secure 6G vehicular aided heterogeneous networks (HetNets). Motivated by these appealing advantages, this work…
With the development of innovative applications that demand accurate environment information, e.g., autonomous driving, sensing becomes an important requirement for future wireless networks. To this end, integrated sensing and communication (ISAC) provides a promising platform to exploit the synergy between sensing and communication, where perceptive mobile networks (PMNs) were proposed to add accurate sensing capability to existing wireless networks. The well-developed cellular networks offer exciting opportunities for sensing, including large coverage, strong computation and communication po…
Integrating terrestrial and non-terrestrial networks has the potential of connecting the unconnected and enhancing the user experience for the already-connected, with technological and societal implications of the greatest long-term significance. A convergence of ground, air, and space wireless communications also represents a formidable endeavor for the mobile and satellite communications industries alike, as it entails defining and intelligently orchestrating a new 3D wireless network architecture. In this article, we present the key opportunities and challenges arising from this (r)evolutio…
Reconfigurable intelligent surfaces (RISs), also known as intelligent reflecting surfaces (IRSs), or large intelligent surfaces (LISs), have received significant attention for their potential to enhance the capacity and coverage of wireless networks by smartly reconfiguring the wireless propagation environment. Therefore, RISs are considered a promising technology for the sixth-generation (6G) of communication networks. In this context, we provide a comprehensive overview of the state-of-the-art on RISs, with focus on their operating principles, performance evaluation, beamforming design and r…
Nanjing University of Posts and Telecommunications（南京邮电大学）；Sequans Communications（Sequans通信公司）；The Hong Kong Polytechnic University（香港理工大学）；Beijing University of Posts and Telecommunication（北京邮电大学）；Tohoku University（东北大学）
The new demands for high-reliability and ultra-high capacity wireless communication have led to extensive research into 5G communications. However, the current communication systems, which were designed on the basis of conventional communication theories, signficantly restrict further performance improvements and lead to severe limitations. Recently, the emerging deep learning techniques have been recognized as a promising tool for handling the complicated communication systems, and their potential for optimizing wireless communications has been demonstrated. In this article, we first review t…
Wireless power transfer (WPT) is an emerging paradigm that will enable using wireless to its full potential in future networks, not only to convey information but also to deliver energy. Such networks will enable trillions of future low-power devices to sense, compute, connect, and energize anywhere, anytime, and on the move. The design of such future networks brings new challenges and opportunities for signal processing, machine learning, sensing, and computing so as to make the best use of the RF radiations, spectrum, and network infrastructure in providing cost-effective and real-time power…
King Abdullah University of Science and Technology (KAUST)（阿卜杜拉国王科技大学）
Deep learning (DL) has seen great success in the computer vision (CV) field, and related techniques have been used in security, healthcare, remote sensing, and many other fields. As a parallel development, visual data has become universal in daily life, easily generated by ubiquitous low-cost cameras. Therefore, exploring DL-based CV may yield useful information about objects, such as their number, locations, distribution, motion, etc. Intuitively, DL-based CV can also facilitate and improve the designs of wireless communications, especially in dynamic network scenarios. However, so far, such …
A reconfigurable intelligent surface (RIS) is a metamaterial that can be integrated into walls and influence the propagation of electromagnetic waves. This, typically passive radio frequency (RF) technology is emerging for indoor and outdoor use with the potential of making wireless communications more reliable in increasingly challenging radio environments. This paper goes one step further and introduces mobile RIS, specifically, RIS carried by unmanned aerial vehicles (UAVs) to support cellular communications networks and services of the future. We elaborate on several use cases, challenges,…
Envisioned use cases of unmanned aerial vehicles (UAVs) impose new service requirements in terms of data rate, latency, and sensing accuracy, to name a few. If such requirements are satisfactorily met, it can create novel applications and enable highly reliable and harmonized integration of UAVs in the 6G network ecosystem. Towards this, terahertz (THz) bands are perceived as a prospective technological enabler for various improved functionalities such as ultra-high throughput and enhanced sensing capabilities. This paper focuses on THzempowered UAVs with the following capabilities: communicat…
Recent advances in programmable metasurfaces, also dubbed as reconfigurable intelligent surfaces (RISs), are envisioned to offer a paradigm shift from uncontrollable to fully tunable and customizable wireless propagation environments, enabling a plethora of new applications and technological trends. Therefore, in view of this cutting edge technological concept, we first review the architecture and electromagnetic waves manipulation functionalities of RISs. We then detail some of the recent advancements that have been made towards realizing these programmable functionalities in wireless communi…
Future wireless systems need to support diverse big data and Internet of Things (IoT) applications with dramatically different quality of service (QoS) requirements. Novel designs across the protocol stack are required to achieve effective and efficient QoS provision. In this article, we introduce a novel data oriented approach for the design and analysis of advanced wireless transmission technologies. Unlike conventional channel-oriented approach, we propose to optimally design transmission strategies for individual data transmission sessions, considering both the QoS requirement and instanta…
Cellular-connected wireless connectivity provides new opportunities for virtual reality(VR) to offer seamless user experience from anywhere at anytime. To realize this vision, the quality-of-service (QoS) for wireless VR needs to be carefully defined to reflect human perception requirements. In this paper, we first identify the primary drivers of VR systems, in terms of applications and use cases. We then map the human perception requirements to corresponding QoS requirements for four phases of VR technology development. To shed light on how to provide short/long-range mobility for VR services…
TinyML for On-Device and Edge Analytics in Wireless Networks: A Survey of Deployments, Opportunities, and Concept-Drift Mitigation
University of Oulu（奥卢大学）；Indian Institute of Technology Indore（印多尔印度理工学院）；Skoda Auto University（斯柯达汽车大学）；Faculty of Informatics and Management, University of Hradec Krolove（赫拉德茨克拉洛韦大学信息与管理学院）；S.G. Balekundri Institute of Technology（S.G. 巴伦德里理工学院）
Numerous researchers have studied innovations in future sixth-generation (6G) wireless communications. Indeed, a critical issue that has emerged is to contend with society's insatiable demand for high data rates and massive 6G connectivity. Some scholars consider one innovation to be a breakthrough--the application of free-space optical (FSO) communication. Owing to its exceedingly high carrier frequency/bandwidth and the potential of the unlicensed spectrum domain, FSO communication provides an excellent opportunity to develop ultrafast data links that can be applied in a variety of 6G applic…
Reconfigurable intelligent surfaces (RISs) have emerged as a cost- and energy-efficient technology that can customize and program the physical propagation environment by reflecting radio waves in preferred directions. However, the purely passive reflection of RISs not only limits the end-to-end channel beamforming gains, but also hinders the acquisition of accurate channel state information for the phase control at RISs. In this paper, we provide an overview of a hybrid relay-reflecting intelligent surface (HR-RIS) architecture, in which only a few elements are active and connected to power am…
Fifth-generation (5G) communication, which has many more features than fourth-generation communication, will be officially launched very soon. A new paradigm of wireless communication, the sixth-generation (6G) system, with the full support of artificial intelligence is expected to be deployed between 2027 and 2030. In beyond 5G, there are some fundamental issues, which need to be addressed are higher system capacity, higher data rate, lower latency, and improved quality of service (QoS) compared to 5G system. This paper presents the vision of future 6G wireless communication and its network a…
Unmanned Aerial Vehicles (UAVs) are an important component of next-generation wireless networks that can assist in high data rate communications and provide enhanced coverage.Their high mobility and aerial nature offer deployment flexibility and low-cost infrastructure support to existing cellular networks and provide many applications that rely on mobile wireless communications. However, security is a major challenge in UAV communications, and Physical Layer Security (PLS) is an important technique to improve the reliability and security of data shared with the assistance of UAVs. Recently, I…
We consider a cognitive wireless powered communication network (CWPCN) sharing the spectrum with a primary network who faces security threats from eavesdroppers (EAVs). We propose a new cooperative protocol for the wireless powered secondary users (SU) to cooperate with the primary user (PU). In the protocol, the SUs first harvest energy from the power signals transmitted by the cognitive hybrid access point during the wireless power transfer (WPT) phase, and then use the harvested energy to interfere with the EAVs and gain transmission opportunities at the same time during the wireless inform…
Among the key differentiators of 6G compared to 5G will be the increased emphasis on radio based positioning and sensing. These will be utilized not only for conventional location-aware services and for enhancing communication performance, but also to support new use case families with extreme performance requirements. This paper presents a unified vision from stakeholders across the value chain in terms of both opportunities and challenges for 6G positioning and sensing, as well as use cases, performance requirements, and gap analysis. Combined, this motivates the technical advances in 6G and…
The fifth generation (5G) of wireless communication is in its infancy, and its evolving versions will be launched over the coming years. However, according to exposing the inherent constraints of 5G and the emerging applications and services with stringent requirements e.g. latency, energy/bit, traffic capacity, peak data rate, and reliability, telecom researchers are turning their attention to conceptualize the next generation of wireless communications, i.e. 6G. In this paper, we investigate 6G challenges, requirements, and trends. Furthermore, we discuss how artificial intelligence (AI) tec…
During the last few years, intensive research efforts are being done in the field of brain interfaces to extract neuro-information from the signals representing neuronal activities in the human brain. Recent development of brain-to-computer interfaces support direct communication between animals' brains, enabling direct brain-to-brain communication. Although these results are based on binary communication with relaxed requirements of latency and throughput, the fast development in neuro-science technologies indicates potential new scenarios for wireless communications between brains. In this p…
5G wireless systems will extend mobile communication services beyond mobile telephony, mobile broadband, and massive machine-type communication into new application domains, namely the so-called vertical domains including the smart factory, smart vehicles, smart grid, smart city, etc. Supporting these vertical domains comes with demanding requirements: high-availability, high-reliability, low-latency, and in some cases, high-accuracy positioning. In this survey, we first identify the potential key performance requirements of 5G communication in support of automation in the vertical domains and…
