The fifth generation (5G) of wireless communication is in its infancy, and its evolving versions will be launched over the coming years. However, according to exposing the inherent constraints of 5G and the emerging applications and services with stringent requirements e.g. latency, energy/bit, traffic capacity, peak data rate, and reliability, telecom researchers are turning their attention to conceptualize the next generation of wireless communications, i.e. 6G. In this paper, we investigate 6G challenges, requirements, and trends. Furthermore, we discuss how artificial intelligence (AI) techniques can contribute to 6G. Based on the requirements and solutions, we identify some new fascinating services and use-cases of 6G, which can not be supported by 5G appropriately. Moreover, we explain some research directions that lead to the successful conceptualization and implementation of 6G.
The future wireless communication system faces the bottleneck of the shortage of traditional spectrum resources and the explosive growth of the demand for wireless services. Millimeter-wave communication with spectral resources has become an effective choice for the next generation of wireless broadband cellular communication. However, the transmission path loss is large and oxygen and water molecules absorb Characteristics such as seriousness have brought great challenges to millimeter wave communication, and it is necessary to seek a technical approach different from low-frequency wireless c…
Fifth-generation (5G) communication, which has many more features than fourth-generation communication, will be officially launched very soon. A new paradigm of wireless communication, the sixth-generation (6G) system, with the full support of artificial intelligence is expected to be deployed between 2027 and 2030. In beyond 5G, there are some fundamental issues, which need to be addressed are higher system capacity, higher data rate, lower latency, and improved quality of service (QoS) compared to 5G system. This paper presents the vision of future 6G wireless communication and its network a…
The requirements in terms of service quality such as data rate, latency, power consumption, number of connectivity of future fifth-generation (5G) communication is very high. Moreover, in Internet of Things (IoT) requires massive connectivity. Optical wireless communication (OWC) technologies such as visible light communication, light fidelity, optical camera communication, and free space optical communication can effectively serve for the successful deployment of 5G and IoT. This paper clearly presents the contributions of OWC networks for 5G and IoT solutions.
The next 5 th generation (5G) and above ultra-high speed, ultra-low latency, and extremely high reliable communication systems will consist of heterogeneous networks. These heterogeneous networks will consist not only radio frequency (RF) based systems but also optical wireless based systems. Hybrid architectures among different networks is an excellent approach for achieving the required level of service quality. In this paper, we provide the opportunities bring by hybrid systems considering RF as well as optical wireless based communication technologies. We also discuss about the key researc…
With the great success of artificial intelligence (AI) technologies in pattern recognitions and signal processing, it is interesting to introduce AI technologies into wireless communication systems. Currently, most of studies are focused on applying AI technologies for solving old problems, e.g., wireless location accuracy and resource allocation optimization in wireless communication systems. However, It is important to distinguish new capabilities created by AI technologies and rethink wireless communication systems based on AI running schemes. Compared with conventional capabilities of wire…
This paper studies a novel cooperation method in a two-user wireless powered communication network (WPCN), in which one hybrid access point (HAP) broadcasts wireless energy to two distributed wireless devices (WDs), while the WDs use the harvested energy to transmit their independent information to the HAP. To tackle the user unfairness problem caused by the near-far effect in WPCN, we allow the WD with the stronger WD-to-HAP channel to use part of its harvested energy to help relay the other weaker user's information to the HAP. In particular, we exploit the use of backscatter communication d…
This paper presents the specific application of wireless communication,automotive Wireless Communication also called as Vehicle to Vehicle Communication.It explains the technology used for automotive Wireless Communication along with the various automotive applications relying on wireless communication. Automotive Wireless Communication gives drivers a sixth sense to know whats going on around them to help avoid accidents and improve traffic flow.The paper also describes VANETS (vehicular adhoc networks) and real world test network implementation.Finally,the paper is summarized.
At the dawn of 5G, we take a leap forward and present an original vision of wireless communication beyond its horizon towards 6G: a paradigm-shifting perspective of wireless networks on the cusp of an AI revolution.
Now days, interests in the application of Wireless Body Area Network (WBAN) have grown considerably. A number of tiny wireless sensors, strategically placed on the human body, create a wireless body area network that can monitor various vital signs, providing real-time feedback to the user and medical personnel. This communication needs to be energy efficient and highly reliable while keeping delays low. In this paper we present hardware and software architecture for BAN and also we offer reliable communication and data aggregation.
Smart grid, regarded as the next generation power grid, uses two-way flows of electricity and information to create a widely distributed automated energy delivery network. In this work we present our vision on smart grid from the perspective of wireless communications and networking technologies. We present wireless communication and networking paradigms for four typical scenarios in the future smart grid and also point out the research challenges of the wireless communication and networking technologies used in smart grid
This paper presents the design and the realization of a 60 GHz wireless Gigabit Ethernet communication system. A differential encoded binary phase shift keying modulation (DBPSK) and differential demodulation schemes are adopted for the IF blocks. The Gigabit Ethernet interface allows a high speed transfer of multimedia files via a 60 GHz wireless link. First measurement results are shown for 875 Mbps data rate.
Wireless communications with unmanned aerial vehicles (UAVs) offer a promising solution to provide cost-effective wireless connectivity and extend coverage. In recent years, the area of wireless communications for UAV system design and optimization has been receiving enormous attention from the research community. However, there are still existing challenges that are far from solved. To cope with those challenges, researchers have been exploring the applicability of game-theoretic approaches. This paper surveys the existing game-theoretic solutions and presents a number of novel solutions whic…
Recent years have witnessed a proliferation of battery-powered mobile devices, e.g., smartphones, tablets, sensors, and laptops, which leads a significant demand for high capacity wireless communication with high energy efficiency. Among technologies to provide the efficiency is full-duplex wireless communication. Full-duplex wireless enhances capacity by simultaneously transmitting uplink and downlink data with limited frequency resources. Previous studies on full-duplex wireless mostly focuses on doubling the network capacity, whereas in this paper we discuss that full-duplex wireless can al…
Wireless powered communication network (WPCN) is a new networking paradigm where the battery of wireless communication devices can be remotely replenished by means of microwave wireless power transfer (WPT) technology. WPCN eliminates the need of frequent manual battery replacement/recharging, and thus significantly improves the performance over conventional battery-powered communication networks in many aspects, such as higher throughput, longer device lifetime, and lower network operating cost. However, the design and future application of WPCN is essentially challenged by the low WPT effici…
The recent advanced wireless energy harvesting technology has enabled wireless-powered communications to accommodate wireless data services in a self-sustainable manner. However, wireless-powered communications rely on active RF signals to communicate, and result in high power consumption. On the other hand, ambient backscatter technology that passively reflects existing RF signal sources in the air to communicate has the potential to facilitate an implementation with ultra-low power consumption. In this paper, we introduce a hybrid D2D communication paradigm by integrating ambient backscatter…
The rapidly growing wave of wireless data service is pushing against the boundary of our communication network's processing power. The pervasive and exponentially increasing data traffic present imminent challenges to all the aspects of the wireless system design, such as spectrum efficiency, computing capabilities and fronthaul/backhaul link capacity. In this article, we discuss the challenges and opportunities in the design of scalable wireless systems to embrace such a "bigdata" era. On one hand, we review the state-of-the-art networking architectures and signal processing techniques adapta…
With the fast development of high-speed railway (HSR), the demand for mobile communication on high-speed trains is increasingly growing. This leads to significant attention on the study of resource management in HSR wireless communications with limited bandwidth. Resource management is a challenging problem due to heterogenous quality of service (QoS) requirements and dynamic characteristics of HSR wireless communications. In this article, we first provide a state-of-the-art overview on HSR wireless communications and the existing resource management schemes. Then a location-aware cross-layer …
Wireless communication is a basis of the vision of connected and automated vehicles (CAVs). Given the heterogeneity of both wireless communication technologies and CAV applications, one question that is critical to technology road-mapping and policy making is which communication technology is more suitable for a specific CAV application. Focusing on the technical aspect of this question, we present a multi-scale spatiotemporal perspective of wireless communication technologies as well as canonical CAV applications in active safety, fuel economy and emission control, vehicle automation, and veh…
The wireless communication systems has gone from different generations from SISO systems to MIMO systems. Bandwidth is one important constraint in wireless communication. In wireless communication, high data transmission rates are essential for the services like tripple play i.e. data, voice and video. At user end the capacity determines the quality of the communication systems. This paper aims to compare the different RF wireless communication systems like SISO, MISO, SIMO and MIMO systems on the capacity basis and explaining the concept as today, the wireless communication has evolved from 2…
Semantic communication is an important participant in the next generation of wireless communications. Enabled by this novel paradigm, the conventional Internet-of-Things (IoT) is evolving toward the semantic IoT (SIoT) to achieve significant system performance improvements. However, traditional wireless communication security techniques for bit transmission cannot be applied directly to the SIoT that focuses on semantic information transmission. One key reason is the lack of new security performance indicators. Thus, we have to rethink the wireless communication security in the SIoT. As such, …
Sensor networks can nowadays deliver 99.9% of their data with duty cycles below 1%. This remarkable performance is, however, dependent on some important underlying assumptions: low traffic rates, medium size densities and static nodes. In this thesis, we investigate the performance of these same resource-constrained devices, but under scenarios that present extreme conditions: high traffic rates, high densities and mobility: the so-called Extreme Wireless Sensor Networks (EWSNs).
The growing concerns of a global environmental change raises a revolution on the way of utilizing energy. In wireless industry, green wireless communications has recently gained increasing attention and is expected to play a major role in reduction of electrical power consumption. In particular, actions to promote energy saving of wireless communications with regard to environmental protection are becoming imperative. To this purpose, we study a green communication system model where wireless base station is provisioned with a combination of renewable power source and electrical grid to minimi…
Given the increasing demand from wireless applications, designing energy-efficient group communication protocols is of great importance to multi-hop wireless networks. A group communication session involves a set of member nodes, each of them needs to send a certain number of data packets to all other members. In this paper, we consider the problem of building a shared multicast tree spanning the member nodes such that the total energy consumption of a group communication session using the shared multicast tree is minimized. Since this problem was proven as NP-complete, we propose, under our M…
Collaborative Optimization of Wireless Communication and Computing Resource Allocation based on Multi-Agent Federated Weighting Deep Reinforcement Learning
Wireless communication systems that include unmanned aerial vehicles (UAVs) promise to provide cost-effective wireless connectivity for devices without infrastructure coverage. Compared to terrestrial communications or those based on high-altitude platforms (HAPs), on-demand wireless systems with low-altitude UAVs are in general faster to deploy, more flexibly re-configured, and are likely to have better communication channels due to the presence of short-range line-of-sight (LoS) links. However, the utilization of highly mobile and energy-constrained UAVs for wireless communications also intr…
This article explains how sheaves and homology theory can be applied to simplicial complex models of wireless communication networks to study their vulnerability to jamming. It develops two classes of invariants (one local and one global) for studying which nodes and links present more of a liability to the network's performance when under attack.
In this paper we present a new model for the lifetime of wireless sensor networks used for sea water communications. The new model for power communications takes into consideration parameters such as power consumption for the active mode, power consumption for the sleep mode, power consumption for the transient mode, transmission period, transient mode duration, sleep mode duration, and active mode duration. The power communications model is incorporated in the life time model of wireless sensor networks. The life time model takes into consideration several parameters such as the total number …
This document describes a best-effort delay-tolerant communication system that protects the privacy of users in wireless ad-hoc networks by making their communication undetectable. The proposed system is a wireless broadcast-based adaptation of mix networks where each user belongs to at least one group it trusts, and each group acts as a mix node. Assuming encryption is not broken, it provides undetectability of all users and messages against external adversaries, as well as undetectability of users and messages in non-compromised groups against internal adversaries.
The performance of wireless communication is fundamentally constrained by the limited battery life of wireless devices, whose operations are frequently disrupted due to the need of manual battery replacement/recharging. The recent advance in radio frequency (RF) enabled wireless energy transfer (WET) technology provides an attractive solution named wireless powered communication (WPC), where the wireless devices are powered by dedicated wireless power transmitters to provide continuous and stable microwave energy over the air. As a key enabling technology for truly perpetual communications, WP…
WAP protocol is a set of communication protocols application environment and wireless devices. WAP model more than a WAP gateway. Suitable for wireless communication environment.
The paper addresses the following problems: (1) a brief survey on wireless mobile communication technologies including evolution, history evolution (e.g., chain of system generations 0G, 1G, 2G, 3G, 4G, 5G, 6G, 7G); (2) using a hierarchical structural modular approach to the generations of the wireless communication systems (i.e., hierarchical combinatorial modeling of the communication technologies), (3) illustrative usage of two-stage combinatorial approach to improvement/forecasting of the communication technology (a version of 5G) (on the basis of multiple choice problem). Numerical exampl…
This paper reports our work on extending the Omnet INET Framework with a directional radio model, putting a special emphasis on the implementation of asymmetrical communications. We first analyze the original INET radio model, focusing on its design and components. Then we discuss the modifications that have been done to support directional communications. Our preliminary results show that the new model is flexible enough to allow the user to provide any antenna pattern shape, with only an additional reasonable computational cost.
Intelligent reflecting surfaces (IRSs) tune wireless environments to increase spectrum and energy efficiencies. In view of much recent attention to the IRS concept as a promising technology for 6G wireless communications, we present a survey of IRSs in this paper. Specifically, we categorize recent research studies of IRSs as follows. For IRS-aided communications, the summary includes capacity/data rate analyses, power/spectral optimizations, channel estimation, deep learning-based design, and reliability analysis. Then we review IRSs implementations as well as the use of IRSs in secure commun…
Wireless networking is rapidly growing and becomes an inexpensive technology which allows multiple users to simultaneously access the network and the internet while roaming about the campus. In the present work, the software development of a wireless LAN(WLAN) is highlighted. This WLAN utilizes direct sequence spread spectrum (DSSS) technology at 902MHz RF carrier frequency in its physical layer. Cost effective installation and antijaming property of spread spectrum technology are the major advantages of this work.
Next-generation wireless networks must enable emerging technologies such as augmented reality and connected autonomous vehicles via wide range of wireless services that span enhanced mobile broadband (eMBB), as well as ultra-reliable low-latency communication (URLLC). Existing wireless systems that solely rely on the scarce sub-6 GHz, microwave ($μ$W) frequency bands will be unable to meet such stringent and mixed service requirements for future wireless services due to spectrum scarcity. Meanwhile, operating at high-frequency millimeter wave (mmWave) bands is seen as an attractive solution, p…
Ambient backscatter communication technology has been introduced recently, and is then quickly becoming a promising choice for self-sustainable communication systems as an external power supply or a dedicated carrier emitter is not required. By leveraging existing RF signal resources, ambient backscatter technology can support sustainable and independent communications and consequently open up a whole new set of applications that facilitate Internet-of-Things (IoT). In this article, we study an integration of ambient backscatter with wireless powered communication networks (WPCNs). We first pr…
Underwater wireless communications can be carried out through acoustic, radio frequency (RF), and optical waves. Compared to its bandwidth limited acoustic and RF counterparts, underwater optical wireless communications (UOWCs) can support higher data rates at low latency levels. However, severe aquatic channel conditions (e.g., absorption, scattering, turbulence, etc.) pose great challenges for UOWCs and significantly reduce the attainable communication ranges, which necessitates efficient networking and localization solutions. Therefore, we provide a comprehensive survey on the challenges, a…
Virginia Tech（弗吉尼亚理工大学）；DeepSig, Inc.（DeepSig公司）；Intelligent Automation, Inc.（智能自动化公司）
Existing communication systems exhibit inherent limitations in translating theory to practice when handling the complexity of optimization for emerging wireless applications with high degrees of freedom. Deep learning has a strong potential to overcome this challenge via data-driven solutions and improve the performance of wireless systems in utilizing limited spectrum resources. In this chapter, we first describe how deep learning is used to design an end-to-end communication system using autoencoders. This flexible design effectively captures channel impairments and optimizes transmitter and…
College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics（南京航空航天大学电子与信息工程学院）；College of Artificial Intelligence, Nanjing University of Aeronautics and Astronautics（南京航空航天大学人工智能学院）
We investigate methods for network association that improve the reliability of uplink transmissions in dense wireless heterogeneous networks. The stochastic geometry analysis shows that the double association, in which an uplink transmission is transmitted to a macro Base Station (BS) and small BS, significantly improves the probability of successful transmission.
Aided by the ubiquitous wireless connectivity, declining communication costs, and the emergence of cloud platforms, the deployment of Internet of Things (IoT) devices and services is accelerating. Most major mobile network operators view machine-to-machine (M2M) communication networks for supporting IoT as a significant source of new revenue. In this paper, we motivate the need for wide-area M2M wireless networks, especially for short data packet communication to support a very large number of IoT devices. We first present a brief overview of current and emerging technologies for supporting wi…
The year 2020 is experiencing a global health and economic crisis due to the COVID-19 pandemic. Countries across the world are using digital technologies to fight this global crisis. These digital technologies, in one way or another, strongly rely on the availability of wireless communication technologies. In this paper, we present the role of wireless communications in the COVID-19 pandemic from different perspectives. First, we show how these technologies are helping to combat this pandemic, including monitoring of the virus spread, enabling healthcare automation, and allowing virtual educat…
The broadcast nature of wireless communication systems makes wireless transmission extremely susceptible to eavesdropping and even malicious interference. Physical layer security technology can effectively protect the private information sent by the transmitter from being listened to by illegal eavesdroppers, thus ensuring the privacy and security of communication between the transmitter and legitimate users. The development of mobile communication presents new challenges to physical layer security research. This paper provides a comprehensive survey of the physical layer security research on …
The upcoming industrial revolution requires deployment of critical wireless sensor networks for automation and monitoring purposes. However, the reliability of the wireless communication is rendered unpredictable by mobile elements in the communication environment such as humans or mobile robots which lead to dynamically changing radio environments. Changes in the wireless channel can be monitored with frequent pilot transmission. However, that would stress the battery life of sensors. In this work a new wireless channel estimation technique, Veni Vidi Dixi, VVD, is proposed. VVD leverages the…
University of Macau（澳门大学）；National University of Singapore（新加坡国立大学）
Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be effi…
Age of Information (AoI) measures the freshness of data in mission critical Internet-of-Things (IoT) applications i.e., industrial internet, intelligent transportation systems etc. In this paper, a new system model is proposed to estimate the average AoI (AAoI) in an ultra-reliable low latency communication (URLLC) enabled wireless communication system with decodeand-forward relay scheme over the quasi-static Rayleigh block fading channels. Short packet communication scheme is used to meet both reliability and latency requirements of the proposed wireless network. By resorting finite block len…
Tremendous growing demand for high data rate services is the main driver for increasing traffic in wireless cellular networks. Device-to-Device (D2D) communications have recently been proposed to offload data via direct communications by bypassing cellular base stations (BSs). Such an offloading schemes increase capacity and reduce end-to-end delay in cellular networks and help to serve the dramatically increasing demand for high data rate. In this paper, we aim to analyze inband fullduplex (FD) D2D performance for the wireless video distribution by considering imperfect self-interference (SI)…
