One of the fundamental goals of nanotechnology is to exploit selective and directional interactions between molecules to design particles that self-assemble into desired structures, from capsids, to nano-clusters, to fully formed crystals with target properties (e.g. optical, mechanical, etc.). Here we provide a general framework which transforms the inverse problem of self-assembly of colloidal crystals into a Boolean satisfiability problem for which solutions can be found numerically. Given a reference structure and the desired number of components, our approach produces designs for which the target structure is an energy minimum, and also allows to exclude solutions that correspond to competing structures. We demonstrate the effectiveness of our approach by designing model particles that spontaneously nucleate milestone structures such as the cubic diamond, the pyrochlore and the clathrate lattices.
We present a lattice Monte Carlo simulation for a multiblock copolymer chain of length N=240 and microarchitecture $(10-10)_{12}$.The simulation was performed using the Monte Carlo method with the Metropolis algorithm. We measured average energy, heat capacity, the mean squared radius of gyration, and the histogram of cluster count distribution. Those quantities were investigated as a function of temperature and incompatibility between segments, quantified by parameter ω. We determined the temperature of the coil-globule transition and constructed the phase diagram exhibiting a variety of patc…
We introduce a scheme to design patchy particles so that a given target crystal is the global free-energy minimum at sufficiently low temperature. A key feature is a torsional component to the potential that only allows binding when particles have the correct relative orientations. In all examples studied, the target crystal structures readily assembled on annealing from a low-density fluid phase, albeit with the simpler target structures assembling more rapidly. The most complex example was a clathrate with 46 particles in its primitive unit cell. We also explored whether the structural infor…
We employ Monte Carlo simulations to investigate the self-assembly of patchy colloidal dumbbells interacting via a modified Kern-Frenkel potential by probing the system concentration and dumbbell shape. We consider dumbbells consisting of one attractive sphere with diameter $σ_1$ and one repulsive sphere with diameter $σ_2$ and center-to-center distance $d$ between the spheres. For three different size ratios, we study the self-assembled structures for different separations $l = 2d/(σ_1+σ_2)$ between the two spheres. In particular, we focus on structures that can be assembled from the homogene…
Colloidal patchy particles with divalent attractive interaction can self-assemble into linear polymer chains. Their equilibrium properties in 2D and 3D are well described by Wertheim's thermodynamic perturbation theory which predicts a well-defined exponentially decaying equilibrium chain length distribution. In experimental realizations, due to gravity, particles sediment to the bottom of the suspension forming a monolayer of particles with a gravitational height smaller than the particle diameter. In accordance with experiments, an anomalously high monomer concentration is observed in simula…
Limited bonding valence, usually accompanied by well-defined directional interactions and selective bonding mechanisms, is nowadays considered among the key ingredients to create complex structures with tailored properties: even though isotropically interacting units already guarantee access to a vast range of functional materials, anisotropic interactions can provide extra instructions to steer the assembly of specific architectures. The anisotropy of effective interactions gives rise to a wealth of self-assembled structures both in the realm of suitably synthesized nano- and micro-sized buil…
We explore the behavior of two-dimensional patchy colloidal particles with 8 or 10 symmetrically arranged patches by employing Monte-Carlo simulations. The particles interact according to an isotropic pair potential that possesses only one typical length. The patches lead to additional attractions that are anisotropic and depend on the relative orientation of two neighboring particles. We investigate the assembled structures with a special interest in quasicrystals. We found that the patch width is of great importance: Only in case of narrow patch widths we are able to observe metastable octag…
We propose a new strategy for robust high-quality self-assembly of non-trivial periodic structures out of patchy particles, and investigate it with Brownian Dynamics (BD) simulations. Its first element is the use of specific patch-patch and shell-shell interactions between the particles, that can be implemented through differential functionalization of patched and shell regions with specific DNA strands. The other key element of our approach is the use of layer-by-layer protocol that allows to avoid a formations of undesired random aggregates. As an example, we design and self-assemble in sili…
We report on the self-assembly of inverse patchy colloids (IPC) using Monte Carlo simulations in two-dimensions. The IPC model considered in this work corresponds to either bipolar colloids or colloids decorated with complementary DNA on their surfaces, where only patch and non-patch parts attract. The patch coverage is found to be a dominant factor in deciding equilibrium self-assembled structures. In particular, both regular square and triangular crystals are found to be stable at 0.5 patch coverage. Upon decreasing the patch coverage to 0.33, the regular square crystal is destablized; inste…
The design space for a self-assembled multicomponent objects ranges from a solution in which every building block is unique to one with the minimum number of distinct building blocks that unambiguously define the target structure. Using a novel pipeline, we explore the design spaces for a set of structures of various sizes and complexities. To understand the implications of the different solutions, we analyse their assembly dynamics using patchy particle simulations and study the influence of the number of distinct building blocks and the angular and spatial tolerances on their interactions on…
Patchy particles have received great attention due to their ability to develop directional and selective interactions and serve as building units for the self-assembly of innovative colloidal molecules and crystalline structures. Although synthesizing particles with multiple dissimilar patches is still highly challenging and lacks efficient methods, these building blocks would open paths towards a broader range of ordered materials with inherent properties. Herein, we describe a new approach to pattern functional DNA patches at the surface of particles, by the use of colloidal stamps. DNA inks…
A comprehensive framework of characterizing complex self-assembled structures with a set of orientational order parameters is presented. It is especially relevant in the context of using anisotropic building blocks with various symmetries. Two classes of tensor order parameters are associated with polyhedral nematic, and bond orientational order, respectively. For the latter, a variation of classical bond order parameters is introduced that takes advantage of the symmetry of constituent particles, and/or expected crystalline phases. These Symmetrized Bond Order Parameters (SymBOPs) can be aver…
The fabrication of versatile building blocks that are reliably self-assemble into desired ordered and disordered phases is amongst the hottest topics in contemporary material science. To this end, microscopic units of varying complexity, aimed at assembling the target phases, have been thought, designed, investigated and built. Such a path usually requires laborious fabrication techniques, especially when a specific funcionalisation of the building blocks is required. Telechelic star polymers, i.e., star polymers made of a number $f$ of di-block copolymers consisting of solvophobic and solvoph…
We propose a general framework for solving inverse self-assembly problems, i.e. designing interactions between elementary units such that they assemble spontaneously into a predetermined structure. Our approach uses patchy particles as building blocks, where the different units bind at specific interaction sites (the patches), and we exploit the possibility of having mixtures with several components. The interaction rules between the patches is determined by transforming the combinatorial problem into a Boolean satisfiability problem (SAT) which searches for solutions where all bonds are forme…
A major goal in nanoscience and nanotechnology is the self-assembly of any desired complex structure with a system of particles interacting through simple potentials. To achieve this objective, intense experimental and theoretical efforts are currently concentrated in the development of the so called "patchy" particles. Here we follow a completely different approach and introduce a very accessible model to produce a large variety of pre-programmed two-dimensional (2D) complex structures. Our model consists of a binary mixture of particles that interact through isotropic in plane interactions t…
Due to the combined effect of anisotropic interactions and activity, Janus swimmers are capable to self-assemble in a wide variety of structures, many more than their equilibrium counterpart. This might lead to the development of novel active materials capable of performing tasks without any central control. Their potential application in designing such materials endows trying to understand the fundamental mechanism in which these swimmers self-assemble. In the present work, we study a quasi-two dimensional semi-dilute suspensions of two classes of amphiphilic spherical swimmers whose directio…
Designing and fabricating self-assembled open colloidal crystals have become one major direction in soft matter community because of many promising applications associated with open colloidal crystals. However, most of the self-assembled crystals found in experiments are not open but close-packed. Here by using computer simulation, we systematically investigate the self-assembly of oppositely charged colloidal hard spheres confined between two parallel hard walls, and we find that the confinement can stabilize multi-layer NaCl-like (simple cubic) open crystals. The maximal layers of stable NaC…
In the standard DNA brick set-up, distinct 32-nucleotide strands of single-stranded DNA are each designed to bind specifically to four other such molecules. Experimentally, it has been demonstrated that the overall yield is increased if certain bricks which occur on the outer faces of target structures are merged with adjacent bricks. However, it is not well understood by what mechanism such `boundary bricks' increase the yield, as they likely influence both the nucleation process and the final stability of the target structure. Here, we use Monte Carlo simulations with a patchy particle model…
Microgels are colloidal-scale particles individually made of crosslinked polymer networks that can swell and deswell in response to external stimuli, such as changes to temperature or pH. Despite a large amount of experimental activities on microgels, a proper theoretical description based on individual particle properties is still missing due to the complexity of the particles. To go one step further, here we propose a novel methodology to assemble realistic microgel particles "in silico". We exploit the self-assembly of a binary mixture composed of tetravalent (crosslinkers) and bivalent (mo…
At the cutting edge of materials science, matter is designed to self-organize into structures that perform a wide range of functions. The past two decades have witnessed major innovations in the versatility of building blocks, ranging from DNA on the nanoscale to handshaking materials on the macroscale. Like a jigsaw puzzle, one can reliably self-assemble arbitrary structures if all the pieces are distinct, but systems with fewer flavors of building blocks have so far been limited to the assembly of exotic crystals. Inspired by Nature's strategy of folding biopolymers into specific RNA and pro…
Catalytically active colloids maintain non-equilibrium conditions in which they produce and deplete chemicals and hence effectively act as sources and sinks of molecules. While individual colloids that are symmetrically coated do not exhibit any form of dynamical activity, the concentration fields resulting from their chemical activity decay as $1/r$ and produce gradients that attract or repel other colloids depending on their surface chemistry and ambient variables. This results in a non-equilibrium analogue of ionic systems, but with the remarkable novel feature of action-reaction symmetry b…
We use inverse methods of statistical mechanics to explore trade-offs associated with designing interactions to stabilize self-assembled structures against changes in density or temperature. Specifically, we find isotropic,convex-repulsive pair potentials that maximize the density range for which a two-dimensional square lattice is the stable ground state subject to a constraint on the chemical potential advantage it exhibits over competing structures (i.e., 'depth' of the associated minimum on the chemical potential hypersurface). We formulate the design problem as a non-linear program, which…
The quest for designing new self-propelled colloids is fuelled by the demand for simple experimental models to study the collective behaviour of their more complex natural counterparts. Most synthetic self-propelled particles move by converting the input energy into translational motion. In this work we address the question if simple self-propelled spheres can assemble into more complex structures that exhibit rotational motion, possibly coupled with translational motion as in flagella. We exploit a combination of induced dipolar interactions and a bonding step to create permanent linear bead …
