A hybrid device comprising a (Al)GaAs quantum dot heterostructure and a LiNbO$_3$ surface acoustic wave resonator is fabricated by heterointegration. High acoustic quality factors $Q>4000$ are demonstrated for an operation frequency $f\approx 300$ MHz. The measured large quality factor-frequency products $Q\times f>10^{12}$ ensures the suppression of decoherence due to thermal noise for temperatures exceeding $T>50\,\mathrm{K}$. Frequency and position dependent optomechanical coupling of single quantum dots and the resonator modes is observed.
We fabricated an acousto-optic semiconductor hybrid device for strong optomechanical coupling of individual quantum emitters and a surface acoustic wave. Our device comprises a surface acoustic wave chip made from highly piezoelectric LiNbO$_3$ and a GaAs-based semiconductor membrane with an embedded layer of quantum dots. Employing multi-harmonic transducers, we generated sound waves on LiNbO$_3$ over a wide range of radio frequencies. We monitored their coupling to and propagation across the semiconductor membrane both in the electrical and optical domain. We demonstrate enhanced optomechani…
Recent experiments demonstrated that GaAs-AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semiconductor-vacuum boundary conditions lead to very distinct features in the mechanical and optical three dimensional confinement. We find a strong dependence of the mechanical quality factor and strain di…
Chip-based cavity optomechanical systems are being considered for applications in sensing, metrology, and quantum information science. Critical to their development is an understanding of how the optical and mechanical modes interact, quantified by the coupling rate $g_{0}$. Here, we develop GaAs optomechanical resonators and investigate the moving dielectric boundary and photoelastic contributions to $g_{0}$. First, we consider coupling between the fundamental radial breathing mechanical mode and a 1550 nm band optical whispering gallery mode in microdisks. For decreasing disk radius from $R=…
We present a simple fabrication method for the realization of suspended GaAs nanomembranes for cavity quantum optomechanics experiments. GaAs nanomembranes with an area of 1.36 mm by 1.91 mm and a thickness of 160 nm are obtained by using a two-step selective wet-etching technique. The frequency noise spectrum reveals several mechanical modes in the kilohertz regime with mechanical Q-factors up to 2,300,000 at room temperature. The measured mechanical mode profiles agree well with a taut rectangular drumhead model. Our results show that GaAs nanomembranes provide a promising path towards quant…
We report on wavelength-sized GaAs optomechanical disk resonators showing ultra-strong optomechanical interaction. We observe optical transduction of a disk mechanical breathing mode with 1.4 GHz frequency and effective mass of ~ 2 pg. The measured vacuum optomechanical coupling rate reaches 0.8 MHz, with a related differential optomechanical coupling factor of 485 GHz/nm. The disk Brownian motion is optically resolved with a sensitivity of 10-17 m/{\sqrt}Hz at room temperature and pressure.
GaAs disk resonators (typical disk size 5 \mum * 200 nm in our work) are good candidates for boosting optomechanical coupling thanks to their ability to confine both optical and mechanical energy in a sub-micron interaction volume. We present results of optomechanical characterization of GaAs disks by near-field optical coupling from a tapered silica nano-waveguide. Whispering gallery modes with optical Q factor up to a few 10^5 are observed. Critical coupling, optical resonance doublet splitting and mode identification are discussed. We eventually show an optomechanical phenomenon of optical …
Optomechanical coupling between a mechanical oscillator and light trapped in a cavity increases when the coupling takes place in a reduced volume. Here we demonstrate a GaAs semiconductor optomechanical disk system where both optical and mechanical energy can be confined in a sub-micron scale interaction volume. We observe giant optomechanical coupling rate up to 100 GHz/nm involving picogram mass mechanical modes with frequency between 100 MHz and 1 GHz. The mechanical modes are singled-out measuring their dispersion as a function of disk geometry. Their Brownian motion is optically resolved …
Radiation pressure, electrostriction, and photothermal forces have been investigated to evidence backaction, non-linearities and quantum phenomena in cavity optomechanics. We show here through a detailed study of the relative intensity of the cavity mechanical modes observed when exciting with pulsed lasers close to the GaAs optical gap that optoelectronic forces involving real carrier excitation and deformation potential interaction are the strongest mechanism of light-to-sound transduction in semiconductor GaAs/AlAs distributed Bragg reflector optomechanical resonators. We demonstrate that t…
Optomechanical systems based on nanophotonics are advancing the field of precision motion measurement, quantum control and nanomechanical sensing. In this context III-V semiconductors offer original assets like the heteroepitaxial growth of optimized metamaterials for photon/phonon interactions. GaAs has already demonstrated high performances in optomechanics but suffers from two photon absorption (TPA) at the telecom wavelength, which can limit the cooperativity. Here, we investigate TPA-free III-V semiconductor materials for optomechanics applications: GaAs lattice-matched In0:5Ga0:5P and Al…
We present high-reflectivity mechanical resonators fabricated from AlGaAs heterostructures for use in free-space optical cavities operating in the telecom wavelength regime. The mechanical resonators are fabricated in slabs of GaAs and patterned with a photonic crystal to increase their out-of-plane reflectivity. Characterization of the mechanical modes reveals residual tensile stress in the GaAs device layer. This stress results in higher mechanical frequencies than in unstressed GaAs and can be used for strain engineering of mechanical dissipation. Simultaneously, we find that the finite wai…
Piezoelectric optomechanical platforms present one of the most promising routes towards efficient transduction of signals from the microwave to the optical frequency domains. New device architectures need to be developed in order to achieve the stringent requirements for building efficient quantum transducers. In this work, we utilize the mechanical supermode principle to improve the overall microwave to optical transduction efficiency, by fabricating Lamb wave resonators that are hybridized with the mechanical breathing modes of a rib waveguide in a suspended gallium arsenide (GaAs) photonic …
We analyze the magnitude of the radiation pressure and electrostrictive stresses exerted by light confined inside GaAs semiconductor WGM optomechanical disk resonators, through analytical and numerical means, and find the electrostrictive force to be of prime importance. We investigate the geometric and photoelastic optomechanical coupling resulting respectively from the deformation of the disk boundary and from the strain-induced refractive index changes in the material, for various mechanical modes of the disks. Photoelastic optomechanical coupling is shown to be a predominant coupling mecha…
We experimentally demonstrate the controlled enhancement of the mechanical quality factor Q of GaAs disk optomechanical resonators. Disks vibrating at 1.3 GHz with a mechanical shield integrated in their pedestal show a Q improvement by a factor 10 to 16. The structure is modeled numerically and different modes of vibration are observed, which shed light on the Q enhancement mechanism. An optimized double-disk geometry is presented that promises Q above the million for a large parameter range.
The interaction of optical and mechanical modes in nanoscale optomechanical systems has been widely studied for applications ranging from sensing to quantum information science. Here, we develop a platform for cavity optomechanical circuits in which localized and interacting 1550 nm photons and 2.4 GHz phonons are combined with photonic and phononic waveguides. Working in GaAs facilitates manipulation of the localized mechanical mode either with a radio frequency field through the piezo-electric effect, or optically through the strong photoelastic effect. We use this to demonstrate a novel aco…
We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impart an intrinsic tensile strain to a monocrystalline thin film (approximately 30 nm thick). These structures exhibit mechanical quality factors of 2*10^6 or beyond at room temperature and 17 K for eigen…
We demonstrate mechanical modulations of the exciton lifetime by using vibrational strain of a gallium arsenide (GaAs) resonator. The strain-induced modulations have anisotropic dependences on the crystal orientation, which reveals the origin of these modulations to be the piezoelectric effect. Numerical analyses based on the tunneling model clarify that the mechanical strain modulates the internal electric field and spatially separates the electrons and holes, leading to non-radiative exciton decomposition. This carrier separation also generates an optomechanical back-action force from the ph…
The optomechanical coupling of quantum dots and flexural mechanical modes is studied in suspended nanophononic strings. The investigated devices are designed and monolithically fabricated on an (Al)GaAs heterostructure. Radio frequency elastic waves with frequencies ranging between $f$=250 MHz to 400 MHz are generated as Rayleigh surface acoustic waves on the unpatterned substrate and injected as Lamb waves in the nanophononic string. Quantum dots inside the nanophononic string exhibit a 15-fold enhanced optomechanical modulation compared to those dynamically strained by the Rayleigh surface a…
Electromagnetic fields coupled with mechanical degrees of freedom have recently shown exceptional and innovative applications, ultimately leading to mesoscopic optomechanical devices operating in the quantum regime of motion. Simultaneously, micromechanical elements have provided new ways to enhance and manipulate the optical properties of passive photonic elements. Following this concept, in this article we show how combining a chiral metasurface with a GaAs suspended micromembrane can offer new scenarios for controlling the polarization state of near-infrared light beams. Starting from the u…
Detections of gravitational waves (GW) in the frequency band 35 Hz to 500 Hz have led to the birth of GW astronomy. Expected signals above 500 Hz, such as the quasinormal modes of lower mass black holes and neutron star mergers signatures are currently not detectable due to increasing quantum shot noise at high frequencies. Squeezed vacuum injection has been shown to allow broadband sensitivity improvement, but this technique does not change the slope of the noise at high frequency. It has been shown that white light signal recycling using negative dispersion optomechanical filter cavities wit…
