We study a multiple-input single-output (MISO) communication system assisted by a reconfigurable intelligent surface (RIS). A base station (BS) having multiple antennas is assumed to be communicating to a single-antenna user equipment (UE), with the help of a RIS. We assume that the system operates in an environment with line-of-sight (LoS) between the BS and RIS, whereas the RIS-UE link experiences Rayleigh fading. We present a closed form expression for the optimal active and passive beamforming vectors at the BS and RIS respectively. Then, by characterizing the statistical properties of the received SNR at the UE, we apply them to derive analytical approximations for different system performance measures, including the outage probability, average achievable rate and average symbol error probability (SEP). Our results, in general, demonstrate that the gain due to RIS can be substantial, and can be significantly greater than the gains reaped by using multiple BS antennas.
Intelligent reflecting surface (IRS) is considered as an enabling technology for future wireless communication systems since it can intelligently change the wireless environment to improve the communication performance. In this paper, an IRS-enhanced wideband multiuser multi-input single-output orthogonal frequency division multiplexing (MU-MISO-OFDM) system is investigated. We aim to jointly design the transmit beamformer and the reflection of IRS to maximize the average sum-rate over all subcarriers. With the aid of the relationship between sum-rate maximization and mean square error (MSE) m…
Analog/digital hybrid beamforming architectures with large-scale antenna arrays have been widely considered in millimeter wave (mmWave) communication systems because they can address the tradeoff between performance and hardware efficiency compared with traditional fully-digital beamforming. Most of the prior work on hybrid beamforming focused on fullyconnected architecture or partially-connected scheme with fixedsubarrays, in which the analog beamformers are usually realized by infinite-resolution phase shifters (PSs). In this paper, we introduce a novel hybrid beamforming architecture with d…
Owing to the unique advantages of low cost and controllability, reconfigurable intelligent surface (RIS) is a promising candidate to address the blockage issue in millimeter wave (mmWave) communication systems, consequently has captured widespread attention in recent years. However, the joint active beamforming and passive beamforming design is an arduous task due to the high computational complexity and the dynamic changes of wireless environment. In this paper, we consider a RIS-assisted multi-user multiple-input single-output (MU-MISO) mmWave system and aim to develop a deep reinforcement l…
In this letter, we consider the fundamental problem of jointly designing the transmit beamformers and the phase-shifts of the intelligent reflecting surface (IRS) / reconfigurable intelligent surface (RIS) to minimize the transmit power, subject to quality-of-service constraints at individual users in an IRS-assisted multiuser multiple-input single-output downlink communication system. In particular, we propose a new successive convex approximation based second-order cone programming approach in which all the optimization variables are simultaneously updated in each iteration. Our proposed sch…
In this work, we study the statistically robust beamforming design for an intelligent reflecting surfaces (IRS) assisted multiple-input single-output (MISO) wireless system under imperfect channel state information (CSI), where the channel estimation errors are assumed to be additive Gaussian. We aim at jointly optimizing the transmit/receive beamformers and IRS phase shifts to minimize the average mean squared error (MSE) at the user. In particular, to tackle the non-convex optimization problem, an efficient algorithm is developed by capitalizing on alternating optimization and majorization-m…
The paper presents a joint beamforming algorithm using statistical channel state information (S-CSI) for reconfigurable intelligent surfaces (RIS) for multiuser MISO wireless communications. We used S-CSI, which is a long-term average of the cascaded channel as opposed to instantaneous CSI utilized in most existing works. Through this method, the overhead of channel estimation is dramatically reduced. We propose a proximal policy optimization (PPO) algorithm which is a well-known actor-critic based reinforcement learning (RL) algorithm to solve the optimization problem. To test the efficacy of…
By reconfiguring the propagation environment of electromagnetic waves artificially, reconfigurable intelligent surfaces (RISs) have been regarded as a promising and revolutionary hardware technology to improve the energy and spectrum efficiency of wireless networks. In this paper, we study a RIS aided multiuser multiple-input single-output (MISO) wireless power transfer (WPT) system, where the transmitter is equipped with a constant-envelope analog beamformer. We formulate a novel problem to maximize the total received power of all the users by jointly optimizing the beamformer at transmitter …
Reconfigurable intelligent surfaces (RISs) have been deemed as one of potential components of future wireless communication systems because they can adaptively manipulate the wireless propagation environment with low-cost passive devices. However, due to double fading effect, the passive RIS can offer sufficient signal strength only when receivers are nearby and located at the same side as the incident signals. Moreover, RIS cannot provide service coverage for the users at the back side of it. In this paper we introduce a novel reflection and relay dual-functional RIS architecture, which can s…
Wireless communications via intelligent reflecting surfaces (IRSs) has received considerable attention from both academia and industry. In particular, IRSs are able to create favorable wireless propagation environments with typically low-cost passive devices. While various IRS-aided wireless communication systems have been investigated in the literature, thus far, the optimal design of such systems is not well understood. In this paper, IRS-assisted single-user multiple-input single-output (MISO) communication is investigated. To maximize the spectral efficiency, a branch-and-bound (BnB) algor…
This paper considers a secure multigroup multicast multiple-input single-output (MISO) communication system aided by an intelligent reflecting surface (IRS). Specifically, we aim to minimize the transmit power at the Alice via jointly optimizing the transmit beamformer, AN vector and phase shifts at the IRS subject to the secrecy rate constraints as well as the unit modulus constraints of IRS phase shifts. However, the optimization problem is non-convex and directly solving it is intractable. To tackle the optimization problem, we first transform it into a semidefinite relaxation (SDR) problem…
This paper investigates multiuser multi-input single-output (MISO) downlink communications assisted by a self-sustainable intelligent reflection surface (IRS), which can harvest power from the received signals. We study the joint design of the beamformer at an access point (AP) and the phase shifts and the power harvesting schedule at an IRS for maximizing the system sum-rate. The design is formulated as a non-convex optimization problem taking into account the capability of IRS elements to harvest wireless power for realizing self-sustainability. Subsequently, we propose a computationally-eff…
Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wireless information and power transfer (SWIPT) in a multiuser system. The users exploit power splitting (PS) to decode information and harvest energy simultaneously based on a realistic piecewise nonline…
MmWave multiple-input single-output (MISO) systems using a single-antenna receiver are regarded as promising solution for the near future, before the full-fledged 5G MIMO will be widespread. However, for MISO systems synchronization cannot be performed jointly with user localization unless two-way transmissions are used. In this paper we show that thanks to the use of a reconfigurable intelligent surface (RIS), joint localization and synchronization is possible with only downlink MISO transmissions. The direct maximum likelihood (ML) estimator for the position and clock offset is derived. To o…
Reconfigurable intelligent surfaces (RISs) are considered to be a promising solution to overcome the blockage issue in the millimeter-wave (mmWave) band. Energy efficiency is an important performance metric in mmWave systems with a large number of antennas. However, due to the severe path loss in mmWave systems, resource allocation algorithms tend to allocate most of the resources for the benefit of the users with higher channel gains. In this paper, we propose a lexicographic-based approach to find the optimal power allocation, RIS phase shift matrix, and analog precoders that maximize both e…
Bilkent University（比尔肯特大学）；KTH Royal Institute of Technology（KTH皇家理工学院）
We introduce a novel deep reinforcement learning (DRL) approach to jointly optimize transmit beamforming and reconfigurable intelligent surface (RIS) phase shifts in a multiuser multiple input single output (MU-MISO) system to maximize the sum downlink rate under the phase-dependent reflection amplitude model. Our approach addresses the challenge of imperfect channel state information (CSI) and hardware impairments by considering a practical RIS amplitude model. We compare the performance of our approach against a vanilla DRL agent in two scenarios: perfect CSI and phase-dependent RIS amplitud…
This paper defines the problem of optimizing the downlink multi-user multiple input, single output (MU-MISO) sum-rate for ground users served by an aerial reconfigurable intelligent surface (ARIS) that acts as a relay to the terrestrial base station. The deep deterministic policy gradient (DDPG) is proposed to calculate the optimal active beamforming matrix at the base station and the phase shifts of the reflecting elements at the ARIS to maximize the data rate. Simulation results show the superiority of the proposed scheme when compared to deep Q-learning (DQL) and baseline approaches.
Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low power configuration enabling massive connectivity and low latency communications. Channel estimation in RIS-based systems is one of the most critical challenges due to the large number of reflecting unit elements and their distinctive hardware constraints. In this paper, we focus on the downlink of a RIS-assisted multi-user Multiple Input Single Output (MISO) communication system and present a method based on the PARAllel FACtor (PARAFA…
Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted non-orthogonal multiple access (NOMA) communication systems are investigated in its vicinity, where a STAR-RIS is deployed within a predefined region for establishing communication links for users. Both beamformer-based NOMA and cluster-based NOMA schemes are employed at the multi-antenna base station (BS). For each scheme, the STAR-RIS deployment location, the passive transmitting and reflecting beamforming (BF) of the STAR-RIS, and the active BF at the BS are jointly optimized for maximizing the…
The emergent technology of Reconfigurable Intelligent Surfaces (RISs) has the potential to transform wireless environments into controllable systems, through programmable propagation of information-bearing signals. Techniques stemming from the field of Deep Reinforcement Learning (DRL) have recently gained popularity in maximizing the sum-rate performance in multi-user communication systems empowered by RISs. Such approaches are commonly based on Markov Decision Processes (MDPs). In this paper, we instead investigate the sum-rate design problem under the scope of the Multi-Armed Bandits (MAB) …
This letter investigates the reconfigurable intelligent surface (RIS)-assisted multiple-input single-output (MISO) wireless system, where both half-duplex (HD) and full-duplex (FD) operating modes are considered together, for the first time in the literature. The goal is to maximize the rate by optimizing the RIS phase shifts. A novel deep reinforcement learning (DRL) algorithm is proposed to solve the formulated non-convex optimization problem. The complexity analysis and Monte Carlo simulations illustrate that the proposed DRL algorithm significantly improves the rate compared to the non-opt…
This paper considers beamforming for a reconfigurable intelligent surface (RIS)-aided multiple input single output (MISO) communication system in the presence of Rician multipath fading. Our aim is to jointly optimize the transmit beamformer and RIS phase shift matrix for maximizing the mean signal-to-noise (SNR) of the combined signal received over direct and indirect links. While numerical solutions are known for such optimization problems, this is the first paper to derive closed-form expressions for the optimal beamformer and the phase shifter for a closely related problem. In particular, …
We consider a multi-user multiple-input single-output (MISO) communications system which is assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). Unlike conventional passive RISs, hybrid RIS is equipped with a few active elements with the ability to reflect and amplify incident signals to significantly improve the system performance. Towards a fairness-oriented design, we maximize the minimum rate among all users through jointly optimizing the transmit beamforming vectors and RIS reflecting/amplifying coefficients. Combining tools from block coordinate ascent and succes…
This paper investigates the reconfigurable reflecting surface (RIS)-aided multiple-input-single-output (MISO) systems with imperfect channel state information (CSI), where RIS-related channels are modeled by Rician fading. Considering the overhead and complexity in practical systems, we employ the low-complexity maximum ratio combining (MRC) beamforming at the base station (BS), and configure the phase shifts of the RIS based on long-term statistical CSI. Specifically, we first estimate the overall channel matrix based on the linear minimum mean square error (LMMSE) estimator, and evaluate the…
Reconfigurable Intelligent Surfaces (RISs) are recently attracting a wide interest due to their capability of tuning wireless propagation environments in order to increase the system performance of wireless networks. In this paper, a multiuser wireless network assisted by a RIS is studied and resource allocation algorithms are presented for several scenarios. First of all, the problem of channel estimation is considered, and an algorithm that permits separate estimation of the mobile user-to-RIS and RIS-to-base stations components is proposed. Then, for the special case of a single-user system…
In this paper, we study the transmission design for reconfigurable intelligent surface (RIS)-aided multiuser communication networks. Different from most of the existing contributions, we consider long-term CSI-based transmission design, where both the beamforming vectors at the base station (BS) and the phase shifts at the RIS are designed based on long-term CSI, which can significantly reduce the channel estimation overhead. Due to the lack of explicit ergodic data rate expression, we propose a novel deep deterministic policy gradient (DDPG) based algorithm to solve the optimization problem, …
Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and lowpower configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted multi-user wireless communication system a…
To fully exploit the additional dimension brought by reconfigurable intelligent surface (RIS), it is recently suggested by information theory that modulating information upon RIS phases is able to send extra information with increased communication rate. In this paper, we propose a novel superimposed RIS-phase modulation (SRPM) scheme to transfer extra messages by superimposing information-bearing phase offsets to conventionally optimized RIS phases. The proposed SRPM is interpreted as a universal framework for RIS phase modulation. Theoretical union bound of the average bit error rate (ABER) …
In practice, residual transceiver hardware impairments inevitably lead to distortion noise which causes the performance loss. In this paper, we study the robust transmission design for a reconfigurable intelligent surface (RIS)-aided secure communication system in the presence of transceiver hardware impairments. We aim for maximizing the secrecy rate while ensuring the transmit power constraint on the active beamforming at the base station and the unit-modulus constraint on the passive beamforming at the RIS. To address this problem, we adopt the alternate optimization method to iteratively o…
