Porous graphene (PG) is a graphene derivative endowed of nanoporous architectures. This material possesses a particular structure with interconnected networks of high pore volume, producing membranes with a large surface area. Experiments revealed that PG combines remarkable properties such as high mechanical strength and good thermal stability. In this work, we have carried out fully-atomistic reactive (ReaxFF) molecular dynamics simulations to perform a comprehensive study on the elastic properties, fracture mechanism, and thermal stability of 2D porous n-Benzo-CMPs (CMP and n refer, respectively, to pi-conjugated microporous polymers and the pore diameter) membranes with distinct nanoporous architectures. For comparison purposes, the results were also contrasted with the ones for graphene sheets of similar dimensions. We adopted three different nanoporous diameters: small (3.45 A), medium (8.07 A), and large (11.93 A). Results showed that PG is thermally stable up to 4660K, about 1000K smaller than the graphene melting point (5643K). During the PG heating, linear atomic chains are formed combining carbon and hydrogen atoms. The fracture strains range between 15%-34% by applying a uniaxial loading in both plane directions for temperatures up to 1200K. The fracture strain increases proportionally with the nanoporous size. Remarkably, the critical tensile strength for the PG complete fracture is temperature independent. Instead, it depends only on the nanoporous diameter. All the PG membranes go abruptly from elastic to completely fractured regimes after a critical strain threshold.
In this study, we use the transient thermal grating optical technique \textemdash a non-contact, laser-based thermal metrology technique with intrinsically high accuracy \textemdash to investigate room-temperature phonon-mediated thermal transport in two nanoporous holey silicon membranes with limiting dimensions of 100 nm and 250 nm respectively. We compare the experimental results to ab initio calculations of phonon-mediated thermal transport according to the phonon Boltzmann transport equation (BTE) using two different computational techniques. We find that the calculations conducted within…
Modulating ion transport through nanoporous membranes is critical to many important chemical and biological separation processes. The corresponding transport timescales, however, are often too long to capture accurately using conventional molecular dynamics (\textsc{Md}). Recently, path sampling techniques such as forward-flux sampling (\textsc{Ffs}) have emerged as attractive alternatives for efficiently and accurately estimating arbitrarily long ionic passage times. Here, we use non-equilibrium \textsc{Md} and \textsc{Ffs} to explore how the kinetics and mechanism of pressure-driven chloride…
Nanoporous graphitic carbon membranes with defined chemical composition and pore architecture are novel nanomaterials that are actively pursued. Compared to easy-to-make porous carbon powders that dominate the porous carbon research and applications in energy generation/conversion and environmental remediation, porous carbon membranes are synthetically more challenging though rather appealing from an application perspective due to their structural integrity, interconnectivity and purity. Here we report a simple bottom-up approach to fabricate large-size, freestanding, porous carbon membranes t…
One of the most promising applications in nanoscience is the design of new materials to improve water permeability and selectivity of nanoporous membranes. Understanding the molecular architecture behind these fascinating structures and how it impacts the water flow is an intricate but necessary task. We studied here, the water flux through multi-layered nanoporous molybdenum disulfide (MLNMoS$_2$) membranes with different nanopore sizes and length. Molecular dynamics simulations show that the permeability do not increase with the inverse of the membrane thickness, violating the classical hydr…
Nanoporous alumina membranes produced by mild or hard anodisation in oxalic acid at potentials ranging from 5 - 140 V have a controllable pore surface area of up to 200 times the membrane area. They exhibit a saturating magnetic response that is temperature-independent and almost anhysteretic below room temperature. The magnetism cannot be explained by the ~1 ppm of transition-metal impurities present in the membranes. The magnetic moment increases with the area of the open nanopores, reaching values of 0.6 Bohr magnetons per square nanometer for mild anodisation and 8 muB/nm2 for hard anodisa…
Nanoporous carbon composite membranes, comprising a layer of porous carbon fiber structures with an average channel width of 30-60 nm grown on a porous ceramic substrate, are found to exhibit robust desalination effect with high freshwater flux. In three different membrane processes of vacuum membrane distillation, reverse osmosis and forward osmosis, the carbon composite membrane showed 100% salt rejection with 3.5 to 20 times higher freshwater flux compared to existing polymeric membranes. Thermal accounting experiments found that at least 80% of the freshwater pass through the carbon compos…
We report results of a combined investigation of thermal conductivity and acoustic phonon spectra in nanoporous alumina membranes with the pore diameter decreasing from D=180 nm to 25 nm. The samples with the hexagonally arranged pores were selected to have the same porosity of ~13%. The Brillouin-Mandelstam spectroscopy measurements revealed bulk-like phonon spectrum in the samples with D=180-nm pores and spectral features, which were attributed to spatial confinement, in the samples with 25-nm and 40-nm pores. The velocity of the longitudinal acoustic phonons was reduced in the samples with …
Membranes derived from ultrathin polymeric films are promising to meet fast separations, but currently available approaches to produce polymer films with greatly reduced thicknesses on porous supports still faces challenges. Here, defect-free ultrathin polymer covering films (UPCFs) are realized by a facile general approach of rapid solvent evaporation. By fast evaporating dilute polymer solutions, we realize ultrathin coating (~30 nm) of porous substrates exclusively on the top surface, forming UPCFs with a block copolymer of polystyrene-block-poly(2-vinyl pyridine) at room temperature or a h…
Surface-enhanced Raman spectroscopy (SERS) demands reliable, high enhancement substrates in order to be used in different fields of application. Here, we introduce freestanding porous gold membranes (PAuM) as easy to produce, scalable, mechanically stable, and effective SERS substrates. We fabricate large-scale sub-30 thick PAuM, that form freestanding membranes with varying morphologies depending on the nominal gold thickness. These PAuM are mechanically stable for pressures up to $>3$ bar, and exhibit surface-enhanced Raman scattering with local enhancement factors of $10^4$ to $10^5$, which…
Self-supported electrocatalysts being generated and employed directly as electrode for energy conversion has been intensively pursued in the fields of materials chemistry and energy. Herein, we report a synthetic strategy to prepare freestanding hierarchically structured, nitrogen-doped nanoporous graphitic carbon membranes functionalized with Janus-type Co/CoP nanocrystals (termed as HNDCM-Co/CoP), which were successfully applied as a highly-efficient, binder-free electrode in hydrogen evolution reaction (HER). Benefited from multiple structural merits, such as high degree of graphitization, …
The development of high-efficiency porous catalyst membranes critically depends on our understanding of where the majority of the chemical conversions occur within the porous structure. This requires mapping of chemical reactions and mass transport inside the complex nano-scale architecture of porous catalyst membranes which is a multiscale problem in both the temporal and spatial domain. To address this problem, we developed a multi-scale mass transport computational framework based on the Lattice Boltzmann Method (LBM) that allows us to account for catalytic reactions at the gas-solid interf…
Raman spectroscopy is a powerful technique to characterize materials. It probes non-destructively chemical composition, crystallinity, defects, strain and coupling phenomena. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane (PAuM) on top of the surface of interest. Slot-like nanopores in the membrane act as plasmonic slot antennas and enhance the Raman response of the surface or thin film underneath. Simultaneously, the PAuM suppresses the penetration of the…
Large-area nanopore drilling is a major bottleneck in state-of-the-art nanoporous 2D membrane fabrication protocols. In addition, high-quality structural and statistical descriptions of as-fabricated porous membranes are key to predicting the corresponding membrane-wide permeation properties. In this work, we investigate Xe-ion focused ion beam as a tool for scalable, large-area nanopore fabrication on atomically thin, free-standing molybdenum disulphide. The presented irradiation protocol enables designing ultrathin membranes with tunable porosity and pore dimension, along with spatial unifor…
We use all-atom molecular dynamics simulations informed by density functional theory calculations to investigate aqueous ion transport across sub-nanoporous monolayer molybdenum disulfide (MoS$_2$) membranes subject to varying tensile strains. Driven by a transmembrane electric field, highly mechanosensitive permeation of both anions and cations is demonstrated in membranes featuring certain pore structures. For pores that are permeable when unstrained, we demonstrate ion current modulation by a factor of over 20 in the tensile strain range of 0 - 4%. For unstrained pores that are impermeable,…
Nanosize pores can turn semimetallic graphene into a semiconductor and from being impermeable into the most efficient molecular sieve membrane. However, scaling the pores down to the nanometer, while fulfilling the tight structural constraints imposed by applications, represents an enormous challenge for present top-down strategies. Here we report a bottom-up method to synthesize nanoporous graphene comprising an ordered array of pores separated by ribbons, which can be tuned down to the one nanometer range. The size, density, morphology and chemical composition of the pores are defined with a…
Wearable electronic devices and gadgets raise the need for flexible, thin and lightweight batteries. In this article we present for the first time, a unique, single-step method for the preparation of a membrane-electrode assembly for flexible-batteries application. Concurrent electrophoretic deposition (EPD) of positive and negative battery electrodes (LFP and LTO) on opposite sides of a commercial nanoporous membrane (Celgard 2325) results in the formation of a three-layer-battery structure. The cell comprising this electrophoretically deposited structure ran for more than 150 cycles with 125…
Multilayered graphene-based nanoporous membranes with electrolyte incorporated between individual sheets is a unique nano-heterostructure system in which nanoconfined electrons in graphene and ions confined in between sheets are intimately coupled throughout the entire membrane. In contrast to the general notion that the electrolyte gating is unlikely to appear in multilayered graphene stacks, it is demonstrated in this work that the electrolyte gating effect in monolayer graphene can be transferred to its corresponding multilayered porous membranes. This gating effect presented on each indivi…
Removing hazardous particulate and macromolecular contaminants as well as viruses with sizes from a few nm up to the 100-nm-range from water and air is crucial for ensuring sufficient sanitation and hygiene for a growing world population. To this end, high-performance separation membranes are needed that combine high permeance, high selectivity and sufficient mechanical stability under operating conditions. However, design features of separation membranes enhancing permeance reduce selectivity and vice versa. Membrane configurations combining high permeance and high selectivity suffer in turn …
Robust nanoporous polymer films with approximate 100-nm thicknesses would be broadly applicable in technological areas such as flexible sensors, artificial skins, separators, antireflection and self-cleaning films. However, the creation of these films has been extremely challenging. To date, all reported ultrathin films are of insufficient mechanical strength for use without substrate supports. We describe here the fabrication of a new ultrastrong and highly flexible ultrahigh molecular weight polyethylene (UHMWPE) 100-nm porous membrane. Scanning and transmission electron microscopy evaluatio…
Straight versus Spongy -- Effect of Tortuosity on Polymer Imbibition into Nanoporous Matrices Assessed by Segmentation-Free Analysis of 3D Sample Reconstructions
