arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2006.14281cs.ROmath.OC
收藏

大变形柔性机器人的最优轨迹规划

Optimal Trajectory Planning for Flexible Robots with Large Deformation

M. Sajjad Edalatzadeh

摘要:

机器人手臂的轻量化可以减少不必要的能量消耗,这在机器人工业中是理想的。然而,轻质臂经受不期望的弹性变形。本文研究了一种轻型柔性臂的平面运动。为了得到精确的数学模型,考虑了柔性臂大弯曲变形引起的轴向位移和非线性曲率。施加了一个轴向位移与柔性梁的横向位移有关的拉伸条件。这导致具有三个刚性模式和一个弹性模式的机器人模型。弹性模态依赖于时间和位置。假设模式方法用于消除空间依赖性。采用拉格朗日法推导了控制方程。考虑了大变形、重力和尖端质量等非线性项的影响。控制输入包括施加在滑块和臂之间的关节处的力和力矩(见图1)。传统的计算转矩控制律不能使系统稳定,因为没有像系统的状态那样多的控制输入。粒子群优化(PSO)技术,然后用于获得一个合适的轨迹,其目的是最大限度地减少激励的弹性模式。两种方法被认为是用于生成轨迹函数,或者使用三层人工神经网络(ANN)或使用样条插值。为了保证系统的鲁棒性,提出了一种滑模控制策略。仿真结果表明,三层人工神经网络技术提供了任意小的调整时间,也比样条函数技术的优化算法收敛速度更快,并产生光滑的轨迹。

英文摘要:

Robot arms with lighter weight can reduce unnecessary energy consumption which is desirable in robotic industry. However, lightweight arms undergo undesirable elastic deformation. In this paper, the planar motion of a lightweight flexible arm is investigated. In order to obtain a precise mathematical model, the axial displacement and nonlinear curvature of flexible arm arising from large bending deformation is taken into consideration. An in-extensional condition, the axial displacement is related to transverse displacement of the flexible beam, is applied. This leads to a robotic model with three rigid modes and one elastic mode. The elastic mode depends on time and position. An Assume Mode Method is used to remove the spatial dependence. The governing equations is derived using Lagrange Method. The effects of nonlinear terms due to the large deformation, gravity, and tip-mass are considered. Control inputs include forces and moment exerted at the joint between slider and arm (see Fig. 1). The conventional computed torque control laws cannot stabilize the system, since there are not as many control inputs as states of the system. A Particle Swarm Optimization (PSO) technique is then used to obtain a suitable trajectory with the aim of minimizing excitations of the elastic mode. Two methods are considered for generating a trajectory function, either to use a three-layer Artificial Neural Network (ANN) or to use spline interpolation. A sliding mode control strategy is proposed in which the sliding surfaces include elastic mode in order to guarantee robustness. The simulations show that the three-layer ANN technique provides arbitrary small settling time, and also the optimization algorithm converges faster and generates smooth trajectories unlike spline function technique.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑