通过气相3D打印实现功能材料的简易图案化
Facile patterning of functional materials via gas-phase 3D printing
摘要:
空间原子层沉积(SALD)是一种比传统ALD快两个数量级的最新方法,并且可以在大气压下甚至在户外进行。以前的工作已经利用这些资产,专注于高速率,大面积沉积的可能性,以扩大到大规模生产。相反,在这里,我们表明,SALD确实代表了一个理想的平台,通过适当的设计和小型化的SALD近距离头的功能材料的选择性沉积。特别是,我们利用3D打印提供的潜力来制造定制的近距离SALD注射头。通过使用3D打印,可以轻松设计和修改头部,以获得不同的沉积区域、自由形式的图案,甚至复杂的多材料结构。可以用不同的材料打印头,以适应前体的化学性质和所使用的沉积条件。聚合物头可以用作便宜的(甚至是一次性的)头,其既用于执行沉积又用于原型制作和优化目的。最后,通过设计具有圆形同心气体通道的小型化头,可以在Z.这构成了一种基于气态前体的新3D打印方法。由于这里提出的选择性沉积策略是基于SALD工艺,因此可以在低温下以高沉积速率在露天中印刷功能材料的保形和连续薄膜。我们的方法代表了一种新的多功能的方式打印功能材料和设备的空间和拓扑控制,从而扩展了SALD和ALD的潜力,并开辟了一条新的途径,在功能材料的区域选择性沉积领域。
英文摘要:
Spatial Atomic Layer Deposition (SALD) is a recent approach that is up to two orders of magnitude faster than conventional ALD, and that can be performed at atmospheric pressure and even in the open air. Previous works have exploited these assets to focus on the possibility of high-rate, large-area deposition for scaling up into mass production. Conversely, here we show that SALD indeed represents an ideal platform for the selective deposition of functional materials by proper design and miniaturization of SALD close-proximity heads. In particular, we have used the potential offered by 3D printing to fabricate custom close-proximity SALD injection heads. By using 3D printing, the heads can be easily designed and readily modified to obtain different deposition areas, free-form patterns, and even complex multimaterial structures. The heads can be printed in different materials to adjust to the chemistry of the precursors and the deposition conditions used. Polymeric heads can be used as cheap (even disposable) heads that are both used for performing deposition and for prototyping and optimization purposes. Finally, by designing a miniaturized head with circular concentric gas channels, 3D printing of functional materials can be performed with nanometric resolution in Z. This constitutes a new 3D printing approach based on gaseous precursors. Because the selective deposition strategies presented here are based on the SALD process, conformal and continuous thin films of functional materials can be printed at low temperatures and with high deposition rate in the open air. Our approach represents a new versatile way of printing functional materials and devices with spatial and topological control, thus extending the potential of SALD and ALD in general, and opening a new avenue in the field of area-selective deposition of functional materials.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。