We demonstrate mid-infrared (MIR) frequency combs at 10 GHz repetition rate via intra-pulse difference-frequency generation (DFG) in quasi-phase-matched nonlinear media. Few-cycle pump pulses ($\mathbf{\lesssim}$15 fs, 100 pJ) from a near-infrared (NIR) electro-optic frequency comb are provided via nonlinear soliton-like compression in photonic-chip silicon-nitride waveguides. Subsequent intra-pulse DFG in periodically-poled lithium niobate waveguides yields MIR frequency combs in the 3.1--4.1 $μ$m region, while orientation-patterned gallium phosphide provides coverage across 7--11 $μ$m. Cascaded second-order nonlinearities simultaneously provide access to the carrier-envelope-offset frequency of the pump source via in-line f-2f nonlinear interferometry. The high-repetition rate MIR frequency combs introduced here can be used for condensed phase spectroscopy and applications such as laser heterodyne radiometry.
Mid-infrared (MIR) spectrometers are invaluable tools for molecular fingerprinting and hyper-spectral imaging. Among the available spectroscopic approaches, GHz MIR dual-comb absorption spectrometers have the potential to simultaneously combine the high-speed, high spectral resolution, and broad optical bandwidth needed to accurately study complex, transient events in chemistry, combustion, and microscopy. However, such a spectrometer has not yet been demonstrated due to the lack of GHz MIR frequency combs with broad and full spectral coverage. Here, we introduce the first broadband MIR freque…
Applications relying on mid-infrared radiation (Mid-IR, $λ\sim$ 3-30 $μ$m) have progressed at a very rapid pace in recent years, stimulated by scientific and technological breakthroughs. Mid-IR cameras have propelled the field of thermal imaging. And the invention of the quantum cascade laser (QCL) has been a milestone, making compact, semiconductor-based mid-IR lasers available to a vast range of applications. All the recent breakthrough advances stemmed from the development of a transformative technology. In addition to the generation and detection of light, a key functionality for most phot…
We report on the generation of a train of ~ 2 ps, 10 um laser pulses via multiple four-wave mixing and compression of an infrared laser beat-wave propagating in the negative group velocity dispersion region of bulk GaAs and a combination of GaAs and NaCl. The use of a 200 ps, 106 GHz beat-wave, produced by combining laser pulses amplified on the 10P(20) and 10P(16) transition of a CO2 laser, provides a novel method for generating high-power, picosecond, mid-IR laser pulses at a high repetition rate. By using 165 and 882 GHz beat-waves we show that cascaded phase-mismatched difference frequency…
The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but are still facing technological challenges, like achieving high power per comb line and tens of GHz line spacing as required for e.g. direct comb spectroscopy. Here we demonstrate a novel approach to cr…
GHz-bandwidth InAs/InAsSbP barrier infrared detectors for the 3.0-3.7 μm spectral region operating at room temperature
Wroclaw University of Science and Technology（弗罗茨瓦夫科技大学）；Photin sp. z o.o（Photin有限公司）；Institute of Applied Physics, Military University of Technology（军事理工大学应用物理研究所）
We show theoretically and experimentally that a quantum cascade laser (QCL) in an external Fabry-Perot cavity (EC) can produce regular self-pulsations (SP) of the output intensity at frequencies ~75 GHz. We recognize that the propagation delay in EC provides QCL with a "memory" mechanism to preserve the regularity and coherence of the pulse train on the intervals significantly exceeding the sub-picosecond gain coherence and gain recovery times. These results may point to novel practical approaches for producing regular time-domain SPs and pulse trains in the Mid-IR QCLs. Otherwise, due to a mu…
The development of compact and fieldable mid-infrared (mid-IR) spectroscopy devices represents a critical challenge for distributed sensing with applications from gas leak detection to environmental monitoring. Recent work has focused on mid-IR photonic integrated circuit (PIC) sensing platforms and waveguide-integrated mid-IR light sources and detectors based on semiconductors such as PbTe, black phosphorus and tellurene. However, material bandgaps and reliance on SiO$_2$ substrates limit operation to wavelengths $λ\lesssim4\,μ\textrm{m}$. Here we overcome these challenges with a chalcogenide…
In this work, a design for a mid-infrared quantum cascade laser (QCL) frequency comb source that enhances the high frequency response and the comb characteristics of the device is presented . A state-of-the-art active region (AR), grown on a heavily n-doped InP:Si substrate, was processed into a buried heterostructure with a microstrip-like line waveguide. As a result, the repetition rate frequency $f_{rep}$, around 11.09 GHz, can be locked to an injected narrow-linewidth radio frequency (RF) signal, over a range of more than 200 kHz with -10 dBm of injected power, which outperforms normal bur…
Quantum cascade laser (QCL) frequency combs have revolutionized mid-infrared (MIR) spectroscopy by their high brightness and fast temporal resolution, and are a promising technology for fully-integrated and cost-effective sensors. As for other integrated comb sources such as micro-combs and interband cascade laser, QCLs have a comb spacing of several GHz, which is adequate for measurements of wide absorbing structures, typically found in liquid or solid samples. However, high-resolution gas-phase spectra require spectral interleaving and frequency calibration. We developed a frequency calibrat…
On-chip spectroscopy that could realize real-time fingerprinting with label-free and high-throughput detection of trace molecules is one of the 'holy grails" of sensing. Such miniaturized spectrometers would greatly enable applications in chemistry, bio-medicine, material science or space instrumentation, such as hyperspectral microscopy of live cells or pharmaceutical quality control. Dual-comb spectroscopy (DCS), a recent technique of Fourier transform spectroscopy without moving parts, is particularly promising since it measures high-precision spectra in the gas phase using only a single de…
As a potent greenhouse gas and ozone depleting agent, nitrous oxide (N$_2$O) plays a critical role in the global climate. Effective mitigation relies on understanding global sources and sinks which can be supported through isotopic analysis. We present a cross-dispersed spectrometer, coupled with a mid-infrared frequency comb, capable of simultaneously monitoring all singly substituted, stable isotopic variants of N$_2$O. Rigorous evaluation of the instrument lineshape function and data treatment are discussed. Laboratory characterization of the spectrometer demonstrates sub-GHz spectral resol…
We report on the generation of nanosecond mid-infrared pulses having frequency tunability, a narrow linewidth, and a high pulse energy. These pulses are obtained by frequency mixing between injection-seeded near-infrared pulses in potassium titanyl arsenate crystals. A continuous-wave external cavity laser diode or a Ti:sapphire ring laser is used as a tunable seeding source for the near-infrared pulses. The typical energy of the generated mid-infrared pulses is in the range of 0.4-1 mJ/pulse. The tuning wavelength ranges from 3142 to 4806 nm. A narrow linewidth of 1.4 GHz and good frequency r…
We report a broadband RF channelizer based on an integrated optical frequency Kerr micro-comb source, with an RF channelizing bandwidth of 90 GHz, a high RF spectral slice resolution of 1.04 GHz, and experimentally verify the RF performance up to 19 GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection.
Dual-frequency comb spectroscopy has emerged as a disruptive technique for measuring wide-spanning spectra with high resolution, yielding a particularly powerful technique for sensitive multi-component gas analysis. We present a spectrometer system based on dual electro-optical combs with subsequent conversion to the mid-infrared via tunable difference frequency generation, operating in the range from 3 to 4.7 $μ$m. The simultaneously recorded bandwidth is up to 454(1) GHz and a signal-to-noise ratio of 7.3(2) x 10$^2$ Hz$^{-1/2}$ can be reached. The conversion preserves the coherence of the d…
A Kerr microresonator frequency comb has enabled the generation of low-phase-noise millimeter- and terahertz-waves in conjunction with an ultrafast photodiode. It is intriguing to employ the new light source in wireless communication at above 100 GHz band, where a carrier signal with a high signal-to-noise ratio is desired to achieve higher data rates. In this study, we demonstrate two simple and efficient architectures of wireless links based on a microresonator comb. We show experimentally that simultaneous modulation and detection of multiple comb lines result in >10 times stronger modulati…
Multi-gigahertz mechanical vibrations stemming from interactions between light fields and matter, also known as acoustic phonons, have long been a subject of study. In recent years, specially designed functional devices have been developed to enhance the light-matter interaction strength, since the excitation of acoustic phonons by a continuous wave laser alone is insufficient. However, with such structure-dependent enhancements, the strength of the interaction cannot be aptly and instantly controlled. We propose a new technique to control the effective interaction strength, which is not via t…
We report a 92 channel RF channelizer based on a 48.9 GHz integrated micro-comb that operates via soliton crystals, together with a passive high-Q ring resonator that acts as a periodic filter with an optical 3dB bandwidth of 121.4 MHz. We obtain an instant RF bandwidth of 8.08 GHz and 17.55 GHz achieved through temperature tuning. These results represent a major advance to achieving fully integrated photonic RF spectrum channelizers with reduced low complexity, size, and high performance for digital-compatible signal detection and broadband analog signal processing.
We demonstrate a 0.95 GHz repetition rate fully stabilized Yb:fiber frequency comb without optical amplification. Benefitted from the high mode power and high coherence, this comb achieved 35 dB to 42 dB signal to noise ratio on the direct heterodyne beat signals with at least 6 continuous wave lasers (at 580nm, 679nm, 698nm, 707nm, 813nm and 922 nm) while keeping >40 dB carrier envelop frequency signal. It can be used for the direct measurement of optical frequencies in visible and near-infrared wavelengths, and has a great potential on simultaneous comparison of multiple optical frequencies.
This paper shows the experimental details of the stabilization scheme that allows full control of the repetition rate and the carrier-envelope offset frequency of a 10 GHz frequency comb based on a femtosecond Ti:sapphire laser. Octave-spanning spectra are produced in nonlinear microstructured optical fiber, in spite of the reduced peak power associated with the 10 GHz repetition rate. Improved stability of the broadened spectrum is obtained by temperature-stabilization of the nonlinear optical fiber. The carrier-envelope offset frequency and the repetition rate are simultaneously frequency st…
High resolution and fast detection of molecular vibrational absorption is important for organic synthesis, pharmaceutical process and environmental monitoring, and is enabled by mid-infrared (mid-IR) laser frequency combs via dual-comb spectroscopy. Here, we demonstrate a novel and highly simplified approach to broadband mid-IR dual-comb spectroscopy via supercontinuum generation, achieved using unprecedented nanophotonic dispersion engineering that allows for flat-envelope, ultra-broadband mid-IR comb spectra. The mid-IR dual-comb has an instantaneous bandwidth covering the functional group r…
Dual-comb spectroscopy can provide broad spectral bandwidth and high spectral resolution in a short acquisition time, enabling time-resolved measurements. Specifically, spectroscopy in the mid-infrared wavelength range is of particular interest, since most of the molecules have their strongest rotational-vibrational transitions in this "fingerprint" region. Here we report time-resolved mid-infrared dual-comb spectroscopy for the first time, covering ~300 nm bandwidth around 3.3 μm with 6 GHz spectral resolution and 20 μs temporal resolution. As a demonstration, we study a CH4/He gas mixture in…
Beginning with a continuous wave laser at 1064 nm, we generate a 30 GHz electro-optic frequency comb which contains 100 lines spanning 3 THz. The initial comb is subsequently amplified, spectrally broadened in normal dispersion photonic crystal fiber, and then temporally compressed to provide 74 fs pulses with average power of up to 2.6 W. When launched into a second photonic crystal fiber with anomalous dispersion, a supercontinuum spanning 800-1350 nm is generated. Second harmonic generation allows for extension of the 30 GHz comb into the visible, yielding greater than 300 THz of total spec…
Frequency combs with mode spacing in the range of 10 to 20 gigahertz (GHz) are critical for increasingly important applications such as astronomical spectrograph calibration, high-speed dual-comb spectroscopy, and low-noise microwave generation. While electro-optic modulators and microresonators can provide narrowband comb sources at this repetition rate, a significant remaining challenge is a means to produce pulses with sufficient peak power to initiate nonlinear supercontinuum generation spanning hundreds of terahertz (THz) as required for self-referencing in these applications. Here, we pr…
A fully stabilized mid-infrared optical frequency comb spanning from 2.9 to 3.4 um is described. The comb is based on half-harmonic generation in a femtosecond optical parametric oscillator, which transfers the high phase coherence of a fully stabilized near-infrared Er-doped fiber laser comb to the mid-infrared region. The method is simple, as no phase-locked loops or reference lasers are needed. Precise locking of optical frequencies of the mid-infrared comb to the pump comb is experimentally verified at sub-20 mHz level, which corresponds to a fractional statistical uncertainty of 2x10-16 a…
A 12.5 GHz-spaced optical frequency comb locked to a Global Positioning disciplined oscillator for near-IR spectrograph calibration is presented. The comb is generated via filtering a 250 MHz-spaced comb. Subsequency nonlinear broadening of the 12.5 GHz comb extends the wavelength range to cover 1380 nm to 1820 nm, providing complete coverage over the H-band transmission widow of Earth's atmosphere. Finite suppression of spurious sidemodes, optical linewidth and instability of the comb have been examined to estmiate potential wavelength biases in spectrograph calibration. Sidemode suppression …
Optical frequency combs, coherent light sources that connect optical frequencies with microwave oscillations, have become the enabling tool for precision spectroscopy, optical clockwork and attosecond physics over the past decades. Current benchmark systems are self-referenced femtosecond mode-locked lasers, but four-wave-mixing in high-Q resonators have emerged as alternative platforms. Here we report the generation and full stabilization of CMOS-compatible optical frequency combs. The spiral microcomb's two degrees-of-freedom, one of the comb line and the native 18 GHz comb spacing, are firs…
A compact green astro-comb with 43-GHz repetition rate is developed based on a Ti:Sapphire optical frequency comb (OFC) and a mode-selecting cavity. The OFC's large repetition rate of 1.6 GHz eases the requirements for the mode-selecting cavity. Unnecessary frequency-modes of the OFC are suppressed down to $5 \times 10^{-4}$ at 535 nm - 550 nm using a single mode-selecting cavity with 70-MHz linewidth. The radial velocity precision $σ\sim 1.4$ m/s is achieved at the High Dispersion Echelle Spectrosraph for the Okayama 188-cm telescope of the National Astronomical Observatory of Japan using our…
Laser frequency combs are coherent light sources that simultaneously provide pristine frequency spacings for precision metrology and the fundamental basis for ultrafast and attosecond sciences. Recently, nonlinear parametric conversion in high-Q microresonators has been suggested as an alternative platform for optical frequency combs, though almost all in 100 GHz frequencies or more. Here we report a low-phase-noise on-chip Kerr frequency comb with mode spacing compatible with high-speed silicon optoelectronics. The waveguide cross-section of the silicon nitride spiral resonator is designed to…
We present a system for molecular spectroscopy using a broadband mid-infrared laser with near infrared detection. Difference frequency generation of a Yb:fiber femtosecond laser produced a mid-infrared (MIR) source tunable from 2100-3700 cm^-1 (2.7-4.7 microns) with average power up to 40 mW. The MIR spectrum was upconverted to near-infrared wavelengths for broadband detection using a two-dimensional dispersion imaging technique. Absorption measurements were performed over bandwidths of 240 cm^-1 (7.2 THz) with 0.048 cm^-1 (1.4 GHz) resolution, and absolute frequency scale uncertainty was bett…
Mid-infrared (mid-IR) frequency combs have broad applications in molecular spectroscopy and chemical/biological sensing. Recently developed microresonator-based combs in this wavelength regime could enable portable and robust devices using a single-frequency pump field. Here, we report the first demonstration of a modelocked microresonator-based frequency comb in the mid-IR spanning 2.4 μm to 4.3 μm. We observe high pump-to-comb conversion efficiency, in which 40% of the pump power is converted to the output comb power. Utilizing an integrated PIN structure allows for tuning the silicon micror…
Two semiconductor optical frequency combs consuming less than 1 W of electrical power are used to demonstrate high-sensitivity mid-infrared dual-comb spectroscopy in the important 3-4 $μ$m spectral region. The devices are 4 millimeters long by 4 microns wide, and each emits 8 mW of average optical power. The spectroscopic sensing performance is demonstrated by measurements of methane and hydrogen chloride with a spectral coverage of 33 cm$^{-1}$ (1 THz), 0.32 cm$^{-1}$ (9.7 GHz) frequency sampling interval, and peak signal-to-noise ratio of ~100 at 100 $μ$s integration time. The monolithic des…
We extend the technique of multiplex coherent Raman spectroscopy with two femtosecond mode-locked lasers to oscillators of a pulse repetition frequency of 1 GHz. We demonstrate spectra of liquids, which span 1100 cm$^{-1}$ of Raman shifts. At a resolution of 6 cm$^{-1}$, their measurement time may be as short as 5 microseconds for a refresh rate of 2 kHz. The waiting period between acquisitions is improved ten-fold compared to previous experiments with two lasers of 100-MHz repetition frequencies.
We report the coherent phase-locking of a quantum cascade laser (QCL) at 10-$μ$m to the secondary frequency standard of this spectral region, a CO2 laser stabilized on a saturated absorption line of OsO4. The stability and accuracy of the standard are transferred to the QCL resulting in a line width of the order of 10 Hz, and leading to our knowledge to the narrowest QCL to date. The locked QCL is then used to perform absorption spectroscopy spanning 6 GHz of NH3 and methyltrioxorhenium, two species of interest for applications in precision measurements.
The potential of frequency comb spectroscopy has aroused great interest in generating mid-infrared frequency combs in the integrated photonic setting. However, despite remarkable progress in microresonators and quantum cascade lasers, the availability of suitable mid-IR comb sources remains scarce. Here, we present a new approach for the generation of mid-IR microcombs through cascaded three-wave-mixing. By pumping a CdSiP$_2$ microresonator at 1.55 $μ$m wavelength with a low power continuous wave laser, we generate $χ^{(2)}$ frequency combs at 3.1 $μ$m wavelength, with a span of about 30 nm. …
We demonstrate efficient generation of mid-infrared frequency combs based on continuous-wave-seeded femtosecond optical parametric generation in nonlinear waveguides. Conversion of the near-infrared pump to signal and idler light takes place with very high efficiency (74 %) and the threshold (25 pJ) is over 300 times lower than in bulk analogs. Relative intensity noise of the mid-infrared comb is exceptionally low, below 5*10-5 (detector-limited, integrated from 10 Hz to 2 MHz). Furthermore, the mid-infrared bandwidth can be increased by driving the process with broadband pump obtained via sup…
A broadband visible blue-to-red, 10 GHz repetition rate frequency comb is generated by combined spectral broadening and triple-sum frequency generation in an on-chip silicon nitride waveguide. Ultra-short pulses of 150 pJ pulse energy, generated via electro-optic modulation of a 1560 nm continuous-wave laser, are coupled to a silicon nitride waveguide giving rise to a broadband near-infrared supercontinuum. Modal phase matching inside the waveguide allows direct triple-sum frequency transfer of the near-infrared supercontinuum into the visible wavelength range covering more than 250 THz from b…
We demonstrate the first low-noise mid-IR frequency comb source using a silicon microresonator. Our observation of strong Raman scattering lines in the generated comb suggests that Raman and four-wave mixing interactions play a role in assisting the transition to the low-noise state. In addition, we characterize, the intracavity comb generation dynamics using an integrated PIN diode, which takes advantage of the inherent three-photon absorption process in silicon.
We report a mode-locked Ti:sapphire femtosecond laser with 5GHz repetition rate. Spectral broadening of the 24 fs pulses in a microstructured fiber yields an octave-spanning spectrum and permits self-referencing and active stabilization of the emitted femtosecond laser frequency comb (FLFC). The individual modes of the 5GHz FLFC are resolved with a high-resolution spectrometer based on a virtually imaged phased array (VIPA) spectral disperser. Isolation of single comb elements at a microwatt average power level is demonstrated. The combination of the high-power, frequency-stabilized 5GHz laser…
We demonstrate mid-infrared (mid-IR) supercontinuum generation (SCG) with instantaneous bandwidth from 2.2 to 5 μm at 40 dB below the peak, covering the wavelength range desirable for molecular spectroscopy and numerous other applications. The SCG occurs in a tapered As2S3 fiber prepared by in-situ tapering and is pumped by femtosecond pulses from the subharmonic of a mode-locked Er-doped fiber laser. Interference with a narrow linewidth c.w. laser verifies that the coherence properties of the near-IR frequency comb have been preserved through these cascaded nonlinear processes. With this appr…
We report on a high-power mid-infrared frequency comb source based on a femtosecond Er:fiber oscillator with a stabilized repetition rate at 250 MHz. The mid-infrared frequency comb is produced through difference frequency generation in a periodically poled MgO-doped lithium niobate crystal. The output power is about 120 mW with a pulse duration of about 80 fs, and spectrum coverage from 2.9 to 3.6 um. The coherence properties of the produced high-power broadband mid-infrared frequency comb are maintained, which was verified by heterodyne measurements. As the first application, the spectrum of…
We describe and characterize a 25 GHz laser frequency comb based on a cavity-filtered erbium fiber mode-locked laser. The comb provides a uniform array of optical frequencies spanning 1450 nm to 1700 nm, and is stabilized by use of a global positioning system referenced atomic clock. This comb was deployed at the 9.2 m Hobby-Eberly telescope at the McDonald Observatory where it was used as a radial velocity calibration source for the fiber-fed Pathfinder near-infrared spectrograph. Stellar targets were observed in three echelle orders over four nights, and radial velocity precision of \sim10 m…
Mid-infrared dual-comb spectroscopy has the potential to supplant conventional high-resolution Fourier transform spectroscopy in applications that require high resolution, accuracy, signal-to-noise ratio, and speed. Until now, dual-comb spectroscopy in the mid-infrared has been limited to narrow optical bandwidths or to low signal-to-noise ratios. Using a combination of digital signal processing and broadband frequency conversion in waveguides, we demonstrate a mid-infrared dual-comb spectrometer that can measure comb-tooth resolved spectra across an octave of bandwidth in the mid-infrared fro…
Mid-infrared optical frequency combs are of significant interest for molecular spectroscopy due to the large absorption of molecular vibrational modes on one hand, and the ability to implement superior comb-based spectroscopic modalities with increased speed, sensitivity and precision on the other hand. Substantial advances in mid-infrared frequency comb generation have been made in recent years based on nonlinear frequency conversion, microresonator Kerr frequency combs, quantum cascade lasers and mode locking regimes. Here we demonstrate a simple, yet effective method for the direct generati…
