Decades of continuous scaling has reduced the energy of unit computing to virtually zero, while energy-efficient communication has remained the primary bottleneck in achieving fully energy-autonomous IoT nodes. This paper presents and analyzes the trade-offs between the energies required for communication and computation in a wireless sensor network, deployed in a mesh architecture over a 2400-acre university campus, and is targeted towards multi-sensor measurement of temperature, humidity and water nitrate concentration for smart agriculture. Several scenarios involving In-Sensor-Analytics (ISA), Collaborative Intelligence (CI) and Context-Aware-Switching (CAS) of the cluster-head during CI has been considered. A real-time co-optimization algorithm has been developed for minimizing the energy consumption in the network, hence maximizing the overall battery lifetime of individual nodes. Measurement results show that the proposed ISA consumes ~467X lower energy as compared to traditional Bluetooth Low Energy (BLE) communication, and ~69,500X lower energy as compared with Long Range (LoRa) communication. When the ISA is implemented in conjunction with LoRa, the lifetime of the node increases from a mere 4.3 hours to 66.6 days with a 230 mAh coin cell battery, while preserving more than 98% of the total information. The CI and CAS algorithms help in extending the worst-case node lifetime by an additional 50%, thereby exhibiting an overall network lifetime of ~104 days, which is >90% of the theoretical limits as posed by the leakage currents present in the system, while effectively transferring information sampled every second. A web-based monitoring system was developed to archive the measured data in a continuous manner, and to report anomalies in the measured data.
Wireless protocol design for IoT networks is an active area of research which has seen significant interest and developments in recent years. The research community is however handicapped by the lack of a flexible, easily deployable platform for prototyping IoT endpoints that would allow for ground up protocol development and investigation of how such protocols perform at scale. We introduce tinySDR, the first software-defined radio platform tailored to the needs of power-constrained IoT endpoints. TinySDR provides a standalone, fully programmable low power software-defined radio solution that…
Many security issues have come to the fore with the increasingly widespread adoption of Internet-of-Things (IoT) devices. The Mirai attack on Dyn DNS service, in which vulnerable IoT devices such as IP cameras, DVRs and routers were infected and used to propagate large-scale DDoS attacks, is one of the more prominent recent examples. IoT botnets, consisting of hundreds-of-thousands of bots, are currently present ``in-the-wild'' at least and are only expected to grow in the future, with the potential to cause significant network downtimes and financial losses to network companies. We propose, t…
Future warehouses will be made of modular embedded entities with communication ability and energy aware operation attached to the traditional materials handling and warehousing objects. This advancement is mainly to fulfill the flexibility and scalability needs of the emerging warehouses. However, it leads to a new layer of complexity during development and evaluation of such systems due to the multidisciplinarity in logistics, embedded systems, and wireless communications. Although each discipline provides theoretical approaches and simulations for these tasks, many issues are often discovere…
With the recent advancement of technologies over the past year, IoT has become a paradigm in which devices communicate with each other and the cloud to achieve various applications in multidisciplinary fields. However, developing, deploying, and experimenting with IoT applications are still tedious, expensive, and time-consuming due to the factors like heterogeneity of hardware and software. This is where an IoT testbed plays a vital role in aiding developers to test their applications without being deploying it to the target environment. In this paper, we present a testbed that is scalable fo…
Testbeds are a key element in the evaluation of wireless multi-hop networks. In order to relieve researchers from the hassle of deploying their own testbeds, remotely controllable testbeds, such as the FIT/IoT-LAB, are built. However, while the IoT-LAB has a high number of nodes, they are deployed in constraint areas. This, together with the complex nature of radio propagation, makes an ad-hoc construction of multi-hop topologies with a high number of hops difficult. This work presents a strategic approach to solve this problem and proposes algorithms to generate topologies with desired proper…
With the rapid growth of the contemporary Internet of Things (IoT) market, the established systems raise a number of concerns regarding the reliability and the potential presence of critical integration defects. In this paper, we present a PatrIoT framework that aims to provide flexible support to construct an effective IoT system testbed to implement automated interoperability and integration testing. The framework allows scaling from a pure physical testbed to a simulated environment using a number of predefined modules and elements to simulate an IoT device or part of the tested infrastruct…
Wireless networks are becoming the key building block of our communications infrastructure. Examples range from cellular networks to ad hoc and sensor networks in wildlife monitoring and environmental scenarios. With the rise of the Internet of Things (IoT) millions of physical and virtual objects will communicate wireless and enhance the daily life. The adaptivity and scalability of wireless networks in the IoT is one of the most challenging tasks. Bio-inspired networking algorithms are a way to tackle these issues. In this paper we present a simulation framework based on OMNeT++ to implement…
NB-IoT is the 3GPP standard for machine-to-machine communications, recently finalized within LTE release 13. This article gives a brief overview about this new LTE-based radio access technology and presents a implementation developed using the srsLTE software radio suite. We also carry out a performance study in which we compare a theoretical analysis with experimental results obtained in our testbed. Furthermore, we provide some interesting details and share our experience in exploring one of the worldwide first commercial NB-IoT deployments.
The recent spate of cyber attacks towards Internet of Things (IoT) devices in smart homes calls for effective techniques to understand, characterize, and unveil IoT device activities. In this paper, we present a new system, named IoTAthena, to unveil IoT device activities from raw network traffic consisting of timestamped IP packets. IoTAthena characterizes each IoT device activity using an activity signature consisting of an ordered sequence of IP packets with inter-packet time intervals. IoTAthena has two novel polynomial time algorithms, sigMatch and actExtract. For any given signature, sig…
Internet-connected devices are increasingly present in our homes, and privacy breaches, data thefts, and security threats are becoming commonplace. In order to avoid these, we must first understand the behaviour of these devices. In this work, we analyse network traces from a testbed of common IoT devices, and describe general methods for fingerprinting their behavior. We then use the information and insights derived from this data to assess where privacy and security risks manifest themselves, as well as how device behavior affects bandwidth. We demonstrate simple measures that circumvent att…
IoT networks are being used to collect, analyze, and utilize sensor data. There are still some key requirements to leverage IoT networks in digital agriculture, e.g., design and deployment of energy saving and ruggedized sensor nodes (SN), reliable and long-range wireless network connectivity, end-to-end data collection pipelines for batch and streaming data. Thus, we introduce our living lab ORPHEUS and its design and implementation trajectory to showcase our orchestrated testbed of IoT sensors, data connectivity, database orchestration, and visualization dashboard. We deploy light-weight ene…
REST HTTP is the communication protocol of choice for software developers today. In IoT systems with unreliable connectivity, however, a stateless protocol like REST HTTP needs to send a request message multiple times, and it only stops the retransmissions when an acknowledgement arrives at the sender. In our previous work, we studied the usage of random linear network coding (RLNC) for REST HTTP protocol to reducing the amount of unnecessarily retransmissions. In this paper, we experimentally validate the study and analyze REST HTTP with and without RLNC in a simple testbed in dynamic IoT sys…
The number of connected Internet of Things (IoT) devices within cyber-physical infrastructure systems grows at an increasing rate. This poses significant device management and security challenges to current IoT networks. Among several approaches to cope with these challenges, data-based methods rooted in deep learning (DL) are receiving an increased interest. In this paper, motivated by the upcoming surge of 5G IoT connectivity in industrial environments, we propose to integrate a DL-based anomaly detection (AD) as a service into the 3GPP mobile cellular IoT architecture. The proposed architec…
A smart city improves operational efficiency and comfort of living by harnessing techniques such as the Internet of Things (IoT) to collect and process data for decision making. To better support smart cities, data collected by IoT should be stored and processed appropriately. However, IoT devices are often task-specialized and resource-constrained, and thus, they heavily rely on online resources in terms of computing and storage to accomplish various tasks. Moreover, these cloud-based solutions often centralize the resources and are far away from the end IoTs and cannot respond to users in ti…
Fog computing in 5G networks has played a significant role in increasing the number of users in a given network. However, Internet-of-Things (IoT) has driven system designers towards designing heterogeneous networks to support diverse demands (tasks with different priority values) with different latency and data rate constraints. In this paper, our goal is to maximize the total number of tasks served by a heterogeneous network, labeled task throughput, in the presence of data rate and latency constraints and device preferences regarding computational needs. Since our original problem is intrac…
University of Guelph（圭尔夫大学）；University of Toronto（多伦多大学）
Over the years, the popularity and usage of wearable Internet of Things (IoT) devices in several healthcare services are increased. Among the services that benefit from the usage of such devices is predictive analysis, which can improve early diagnosis in e-health. However, due to the limitations of wearable IoT devices, challenges in data privacy, service integrity, and network structure adaptability arose. To address these concerns, we propose a platform using federated learning and private blockchain technology within a fog-IoT network. These technologies have privacy-preserving features se…
Use-cases in the Internet of Things (IoT) typically involve a high number of interconnected, heterogeneous devices. Due to the criticality of many IoT scenarios, systems and applications need to be tested thoroughly before rollout. Existing staging environments and testing frameworks are able to emulate network properties but fail to deliver actual network-wide traffic control to test systems application independently. To extend existing frameworks, we present the distributed traffic replaying tool IoTreeplay. The tool embeds TCPLivePlay into an environment that allows the synchronous replayin…
Internet of Things (IoT) networks require regular firmware updates to ensure enhanced security and stability. As we move towards methodologies of codifying security and policy decisions and exchanging them over IoT large-scale deployments (security-as-a-code), these demands should be considered a routine operation. However, rolling out firmware updates to large-scale networks presents a crucial challenge for constrained wireless environments with large numbers of IoT devices. This paper initially investigates how the current state-of-the-art protocols operate in such adverse conditions by meas…
Internet of Things (IoT) is one of the main features in 5G. Low-power wide-area networking (LPWAN) has attracted enormous research interests to enable large scale deployment of IoT, with the design objectives of low cost, wide coverage area, as well as low power consumption. In particular, long battery lifetime is essential since many of the IoT devices will be deployed in hard-to-access locations. Prediction of the battery lifetime depends on the accurate modelling of energy consumption. This paper presents a comprehensive power consumption model for battery lifetime estimation, which is base…
In-network caching is a central aspect of Information-Centric Networking (ICN). It enables the rapid distribution of content across the network, alleviating strain on content producers and reducing content delivery latencies. ICN has emerged as a promising candidate for use in the Internet of Things (IoT). However, IoT devices operate under severe constraints, most notably limited memory. This means that nodes cannot indiscriminately cache all content; instead, there is a need for a caching strategy that decides what content to cache. Furthermore, many applications in the IoT space are timesen…
This paper revisits NDN deployment in the IoT with a special focus on the interaction of sensors and actuators. Such scenarios require high responsiveness and limited control state at the constrained nodes. We argue that the NDN request-response pattern which prevents data push is vital for IoT networks. We contribute HoP-and-Pull (HoPP), a robust publish-subscribe scheme for typical IoT scenarios that targets IoT networks consisting of hundreds of resource constrained devices at intermittent connectivity. Our approach limits the FIB tables to a minimum and naturally supports mobility, tempora…
One of the main use cases for advanced cellular networks is represented by massive Internet-of-things (MIoT), i.e., an enormous number of IoT devices that transmit data toward the cellular network infrastructure. To make cellular MIoT a reality, data transfer and control procedures specifically designed for the support of IoT are needed. For this reason, 3GPP has introduced the Control Plane Cellular IoT optimization, which foresees a simplified bearer instantiation, with the Mobility Management Entity (MME) handling both control and data traffic. The performance of the MME has therefore becom…
The development of mobile communication technology, hardware, distributed computing, and artificial intelligence (AI) technology has promoted the application of edge computing in the field of heterogeneous Internet of Things (IoT). In order to overcome the defects of the traditional cloud computing model in the era of big data. In this article, we first propose a new AIenabled smart edge with heterogeneous IoT architecture which combines edge computing, caching, and communication. Then, we propose the Smart-Edge-CoCaCo algorithm. To minimize total delay and confirm the computation offloading d…
The vision for smart city imperiously appeals to the implementation of Internet-of-Things (IoT), some features of which, such as massive access and bursty short packet transmissions, require new methods to enable the cellular system to seamlessly support its integration. Rigorous theoretical analysis is indispensable to obtain constructive insight for the networking design of massive access. In this paper, we propose and define the notion of massive and sporadic access (MSA) to quantitatively describe the massive access of IoT devices. We evaluate the temporal correlation of interference and s…
The widespread adoption of Internet of Things has led to many security issues. Post the Mirai-based DDoS attack in 2016 which compromised IoT devices, a host of new malware using Mirai's leaked source code and targeting IoT devices have cropped up, e.g. Satori, Reaper, Amnesia, Masuta etc. These malware exploit software vulnerabilities to infect IoT devices instead of open TELNET ports (like Mirai) making them more difficult to block using existing solutions such as firewalls. In this research, we present EDIMA, a distributed modular solution which can be used towards the detection of IoT malw…
Instead of treating inventory items as static resources, future intelligent warehouses will transcend containers to Cyber Physical Systems (CPS) that actively and autonomously participate in the optimization of the logistical processes. Consequently, new challenges that are system-immanent for the massive Internet of Things (IoT) context, such as channel access in a shared communication medium, have to be addressed. In this paper, we present a multi-methodological system model that brings together testbed experiments for measuring real hardware properties and simulative evaluations for large-s…
We are in the process of developing a system architecture for opportunistic and information centric communications. This architecture (called Keetchi), meant for the Internet of Things (IoT) is focussed on enabling applications to perform distributed and decentralised communications among smart devices. To realise and evaluate this architecture, we follow a 3-step approach. Our first approach of evaluation is the development of a testbed with smart devices (mainly smart phones and tablets) deployed with this architecture including the applications. The second step is where the architecture is …
A Home Area Network (HAN) is considered to be a significant component of Advanced Metering Infrastructure (AMI) and has been studied well in many works. It binds all the electrical components installed in a defined premise together for their close monitoring and management. However, HAN has been realized so far mostly as a centralized system. Therefore, like any other centralized system, the traditional realization of HAN also suffers from various well-known problems, such as single-point-of-failure, susceptibility to attacks, requirement of specialized infrastructure, inflexibility to easy ex…
Internet of Things (IoT) networks consist of sensors, actuators, mobile and wearable devices that can connect to the Internet. With billions of such devices already in the market which have significant vulnerabilities, there is a dangerous threat to the Internet services and also some cyber-physical systems that are also connected to the Internet. Specifically, due to their existing vulnerabilities IoT devices are susceptible to being compromised and being part of a new type of stealthy Distributed Denial of Service (DDoS) attack, called Mongolian DDoS, which is characterized by its widely dis…
Data is central to the Internet of Things (IoT) ecosystem. Most of the current IoT systems are using centralized cloud-based data sharing systems, which will be difficult to scale up to meet the demands of future IoT systems. Involvement of such third-party service provider requires also trust from both sensor owner and sensor data user. Moreover, the fees need to be paid for their services. To tackle both the scalability and trust issues and to automatize the payments, this paper presents a blockchain based proxy re-encryption scheme. The system stores the IoT data in a distributed cloud afte…
Synchronous Flooding (SF) protocols can enhance the wireless connectivity between Internet of Things (IoT) devices. However, existing SF solutions fail to introduce sufficient security measures due to strict time synchronisation requirements, making them vulnerable to malicious actions. Our paper presents a design paradigm for encrypted SF communications. We describe a mechanism for synchronising encryption parameters in a network-wide fashion. Our solution operates with minimal overhead and without compromising communication reliability. Evaluating our paradigm on a real-world, large-scale Io…
Recent years have seen major innovations in developing energy-efficient wireless technologies such as Bluetooth Low Energy (BLE) for Internet of Things (IoT). Despite demonstrating significant benefits in providing low power transmission and massive connectivity, hardly any of these technologies have made it to directly connect to the Internet. Recent advances demonstrate the viability of direct communication among heterogeneous IoT devices with incompatible physical (PHY) layers. These techniques, however, require modifications in transmission power or time, which may affect the media access …
Massive Internet of Things (IoT) is foreseen to introduce plethora of applications for a fully connected world. Heterogeneous traffic is envisaged, where packets generated at each IoT device should be differentiated and served according to their priority. This paper develops a novel priority-aware spatiotemporal mathematical model to characterize massive IoT networks with uplink prioritized multistream traffic (PMT). Particularly, stochastic geometry is utilized to account for the macroscopic network wide mutual interference between the coexisting IoT devices. Discrete time Markov chains (DTMC…
Exploring the Initial Performance of NB-IoT NTN over GEO: Measurement and Analysis
University of Science and Technology of China（中国科学技术大学）；Southern University of Science and Technology（南方科技大学）；University of Luxembourg（卢森堡大学）；Shanghai Jiao Tong University, China（上海交通大学）
RPL, an IPv6 routing protocol for Low power Lossy Networks (LLNs), is considered to be the de facto routing standard for the Internet of Things (IoT). However, more and more experimental results demonstrate that RPL performs poorly when it comes to throughput and adaptability to network dynamics. This significantly limits the application of RPL in many practical IoT scenarios, such as an LLN with high-speed sensor data streams and mobile sensing devices. To address this issue, we develop BRPL, an extension of RPL, providing a practical approach that allows users to smoothly combine any RPL Obj…
Wireless connectivity for the Internet of Things (IoT) requires combining low latency and high reliability with power and cost constraints. On top of that, diverse applications and end-to-end services with very different performance requirements should ideally share the same network infrastructure. Software defined networks (SDN) were defined to allow this coexistence, but they have seen very limited adoption in IoT systems due to the inherent resource constrained nature of the wireless devices. Additionally, the low-power nature of IoT communication standards does not usually allow for physic…
An efficient Home Area Network (HAN) acts as a base of an Advanced Metering Infrastructure (AMI). A HAN not only facilitates AMI with efficient real-time monitoring of the electricity consumption but also manages the load profile of the whole system. However, the existing works on implementing HAN are mostly centralized and suffer from well-known problems. In this work, we propose an IoT-based efficient decentralized strategy using synchronous transmission to practically realize HAN. An inter-device coordination strategy is proposed to minimize the peak load as well as reduce the sudden change…
