REST HTTP is the communication protocol of choice for software developers today. In IoT systems with unreliable connectivity, however, a stateless protocol like REST HTTP needs to send a request message multiple times, and it only stops the retransmissions when an acknowledgement arrives at the sender. In our previous work, we studied the usage of random linear network coding (RLNC) for REST HTTP protocol to reducing the amount of unnecessarily retransmissions. In this paper, we experimentally validate the study and analyze REST HTTP with and without RLNC in a simple testbed in dynamic IoT systems. The measurements show notable improvements in bandwidth utilization in terms of reducing the retransmissions and delay when using network-coded REST HTTP.
In this paper, we design a novel high-throughput random access scheme for an indoor optical wireless communication (OWC) massive Internet of Things (IoT) scenario. Due to the large density of both IoT devices and OWC access points (APs), we base the proposed scheme on multi-receiver coded slotted ALOHA. In this scenario, collisions at APs are resolved by a centralized interference cancellation decoder that may exploit both spatial and temporal diversity. By applying adaptive control of each OWC AP field of view (FOV), the proposed system is able to dynamically adapt to different IoT device act…
A few potential IoT communication protocols at the application layer have been proposed, including MQTT, CoAP and REST HTTP, with the latter being the protocol of choice for software developers due to its compatibility with the existing systems. We present a theoretical model of the expected buffer size on the REST HTTP client buffer in IoT devices under lossy wireless conditions, and validate the study experimentally. The results show that increasing the buffer size in IoT devices does not always improve performance in lossy environments, hence demonstrating the importance of benchmarking the…
Low Power Wide Area Networks (LPWAN) are wireless connectivity solutions for Internet-of-Things (IoT) applications, including industrial automation. Among the several LPWAN technologies, LoRaWAN has been extensively addressed by the research community and the industry. However, the reliability and scalability of LoRaWAN are still uncertain. One of the techniques to increase the reliability of LoRaWAN is message replication, which exploits time diversity. This paper proposes a novel hybrid coded message replication scheme that interleaves simple repetition and a recently proposed coded replicat…
In this work we discuss proxy architectures which interconnect IoT domains running CoAP with the rest of Internet including micro datacenters and other domains building scalable hierarchical architectures. We assume that CoAP domain is terminated by an IoT proxy with cache, and we investigate several design issues with respect to successful data transmission, round trip delay and energy consumption. We present performance data for the case when proxy autonomously maintains data freshness which clearly point to efficient design choices.
Cloud computing provides great benefits for applications hosted on the Web that also have special computational and storage requirements. This paper proposes an extensible and flexible architecture for integrating Wireless Sensor Networks with the Cloud. We have used REST based Web services as an interoperable application layer that can be directly integrated into other application domains for remote monitoring such as e-health care services, smart homes, or even vehicular area networks (VAN). For proof of concept, we have implemented a REST based Web services on an IP based low power WSN test…
The rising number of IoT devices is accelerating the research on new solutions that will be able to efficiently deal with unreliable connectivity in highly dynamic computing applications. To improve the overall performance in IoT applications, there are multiple communication solutions available, either proprietary or open source, all of which satisfy different communication requirements. Most commonly, for this kind of communication, developers choose REST HTTP protocol as a result of its ease of use and compatibility with the existing computing infrastructure. In applications where mobility …
Link failures in wide area networks are common and cause significant data losses. Mesh-based protection schemes offer high capacity efficiency but they are slow and require complex signaling. Additionally, real-time reconfiguration of a cross-connect threatens their transmission integrity. On the other hand, coding-based protection schemes are proactive. Therefore, they have higher restoration speed, lower signaling complexity, and higher transmission integrity. This paper introduces a coding-based protection scheme, named Coded Path Protection (CPP). In CPP, a backup copy of the primary data …
The emerging Internet of Things (IoT) challenges the end-to-end transport of the Internet by low power lossy links and gateways that perform protocol translations. Protocols such as CoAP or MQTT-SN are degraded by the overhead of DTLS sessions, which in common deployment protect content transfer only up to the gateway. To preserve content security end-to-end via gateways and proxies, the IETF recently developed Object Security for Constrained RESTful Environments (OSCORE), which extends CoAP with content object security features commonly known from Information Centric Networks (ICN). This pape…
The Constrained Application Protocol (CoAP) is an HTTP-like protocol for RESTful applications intended to run on constrained devices, typically part of the Internet of Things. CoAP observe is an extension to the CoAP specification that allows CoAP clients to observe a resource through a simple publish/subscribe mechanism. In this paper we leverage Information-Centric Networking (ICN), transparently deployed within the domain of a network provider, to provide enhanced CoAP services. We present the design and the implementation of CoAP observe over ICN and we discuss how ICN can provide benefits…
A fundamental problem faced in the design of almost all packet networks is that of efficient operation--of reliably communicating given messages among nodes at minimum cost in resource usage. We present a solution to the efficient operation problem for coded packet networks, i.e., packet networks where the contents of outgoing packets are arbitrary, causal functions of the contents of received packets. Such networks are in contrast to conventional, routed packet networks, where outgoing packets are restricted to being copies of received packets and where reliability is provided by the use of r…
We consider a wireless Device-to-Device (D2D) network where communication is restricted to be single-hop, users make arbitrary requests from a finite library of possible files and user devices cache information in the form of linear combinations of packets from the files in the library (coded caching). We consider the combined effect of coding in the caching and delivery phases, achieving "coded multicast gain", and of spatial reuse due to local short-range D2D communication. Somewhat counterintuitively, we show that the coded multicast gain and the spatial reuse gain do not cumulate, in terms…
Consider a transmission scheme with a single transmitter and multiple receivers over a faulty broadcast channel. For each receiver, the transmitter has a unique infinite stream of packets, and its goal is to deliver them at the highest throughput possible. While such multiple-unicast models are unsolved in general, several network coding based schemes were suggested. In such schemes, the transmitter can either send an uncoded packet, or a coded packet which is a function of a few packets. The packets sent can be received by the designated receiver (with some probability) or heard and stored by…
Internet of Things (IoT) application deployment requires the allocation of resources such as virtual machines, storage, and network elements that must be deployed over distinct infrastructures such as cloud computing, Cloud of Things (CoT), datacenters and backbone networks. For massive IoT data acquisition, a gateway-based data aggregation approach is commonly used featuring sensor/ actuator seamless access and providing cache/ buffering and preprocessing functionality. In this perspective , gateways acting as producers need to allocate network resources to send IoT data to consumers. In this…
In this paper, we analyze a Cognitive Radio-based Internet-of-Things (CR-IoT) network comprising a Primary Network Provider (PNP) and an IoT operator. The PNP uses its licensed spectrum to serve its users. The IoT operator identifies the white-space in the licensed band at regular intervals and opportunistically exploits them to serve the IoT nodes under its coverage. IoT nodes are battery-operated devices that require periodical energy replenishment. We employ the Microwave Power Transfer (MPT) technique for its superior energy transfer efficiency over long-distance. The white-space detection…
