We model the effect of ground movement, based on empirical experience, on the transport properties of long neutron guides by ray-tracing simulations. Our results reproduce the large losses found by an earlier study for a simple model, while for a more realistic engineering model of guide mounting, we find the losses to be significantly smaller than earlier predicted. A detailed study of the guide for the cold neutron spectrometer BIFROST at the European Spallation Source shows that the loss is 7.0(5) % for wavelengths of 2.3-4.0 Å; the typical operational wavelength range of the instrument. This amount of loss does not call for mitigation by overillumination as suggested in the previous work. Our work serves to quantify the robustness of the transport properties of long neutron guides, in construction or planning at neutron facilities worldwide.
Transport calculations for neutronic design require accurate nuclear data and validated computational tools. In the Spallation Physics Group, at the European Spallation Source, we perform shielding and neutron beam calculations to help the deployment of the instrument suite for the current high brilliance (top) moderator, as well for the design of the high intensity bottom moderator, currently under study for the facility. This work includes providing the best available nuclear data in addition to improving models and tools when necessary. In this paper we present the status of these activitie…
CSPEC is the cold chopper spectrometer of the European Spallation Source (ESS) and will come on-line with the ESS beam on target. CSPEC will be the first cold chopper spectrometer on a long pulsed spallation source which provides great opportunities in terms of signal to noise and novel measuring schemes. We provide a detailed overview of the instrument, scientific design considerations and engineering requirements.
Building the European Spallation Source (ESS), the most powerful neutron source in the world, requires significant technological advances at most fronts of instrument component design. Detectors are not an exception. The existing implementations at current neutron scattering facilities are at their performance limits and sometimes barely cover the scientific needs. At full operation the ESS will yield unprecedented neutron brilliance. This means that one of the most challenging aspects for the new detector designs is the increased rate capability and in particular the peak instantaneous rate c…
We describe theoretical and practical aspects of spin-echo modulated small-angle neutron scattering (SEMSANS) as well as the potential combination with SANS. Based on the preliminary technical designs of SKADI (a SANS instrument proposed for the European Spallation Source) and a SEMSANS add-on, we assess the practicability, feasibility and scientific merit of a combined SANS and SEMSANS setup by calculating tentative SANS and SEMSANS results for soft matter, geology and advanced material samples that have been previously studied by scattering methods. We conclude that lengths from 1 nm up to 0…
Monte Carlo simulations using MCNP6.1 were performed to study the effect of neutron activation in Ar/CO$_{2}$ neutron detector counting gas. A general MCNP model was built and validated with simple analytical calculations. Simulations and calculations agree that only the $^{40}$Ar activation can have a considerable effect. It was shown that neither the prompt gamma intensity from the $^{40}$Ar neutron capture nor the produced $^{41}$Ar activity have an impact in terms of gamma dose rate around the detector and background level.
The European Spallation Source (ESS) is intended to become the most powerful spallation neutron source in the world and the flagship of neutron science in the upcoming decades. The exceptionally high neutron flux will provide unique opportunities for scientific experiments, but also set high requirements for the detectors. One of the most challenging aspects is the rate capability and in particular the peak instantaneous rate capability, i.e. the number of neutrons hitting the detector per channel or cm$^2$ at the peak of the neutron pulse. The primary purpose of this paper is to estimate the …
The European Spallation Source is being constructed in Lund, Sweden and is planned to be the world's brightest pulsed spallation neutron source for cold and thermal neutron beams ($\le$ 1 eV). The facility uses a 2 GeV proton beam to produce neutrons from a tungsten target. The neutrons are then moderated in a moderator assembly consisting of both liquid hydrogen and water compartments. Surrounding the moderator are 22 beamports, which view the moderator's outside surfaces. The beamports are connected to long neutron guides that transport the moderated neutrons to the sample position via refle…
The construction of the European Spallation Source (ESS) faces many challenges from the neutron beam transport point of view: The spallation source is specified as being driven by a 5 MW beam of protons, each with 2 GeV energy, and yet the requirements in instrument background suppression relative to measured signal vary between 10$^{-6}$ and 10$^{-8}$. The energetic particles, particularly above 20 MeV, which are expected to be produced in abundance in the target, have to be filtered in order to make the beamlines safe, operational and provide good quality measurements with low background. We…
The European Spallation Source being constructed in Lund, Sweden will provide the user community with a neutron source of unprecedented brightness. By 2025, a suite of 15 instruments will be served by a high-brightness moderator system placed above the spallation target. The ESS infrastructure, consisting of the proton linac, the target station, and the instrument halls, allows for implementation of a second source below the spallation target. We propose to develop a second neutron source with a high-intensity moderator able to (1) deliver a larger total cold neutron flux, (2) provide high int…
The observation of neutron to antineutron oscillation would be the first experimental evidence to show that baryon number is not a conserved quantity. It also provides an answer to the hypothesized post-sphaleron baryogenesis mechanism shortly after the Big Bang. The free oscillation time {τ_{n\rightarrow\bar{n}} has a lower limit at 8.7 x 10^7 seconds determined at ILL in 1994. Current beyond Standard Model theories of this oscillation time estimate the value to be on the order of 10^{10} seconds. A new experiment is proposed at the European Spallation Source that has 1000 times the sensitivi…
The European Spallation Source (ESS) in Lund, Sweden is just entering the construction phase with 3 neutron instruments having started in its design concept phase in 2014. As a collaboration of 17 European countries the majority of hardware devices for neutron instrumentation will be provided in-kind. This presents numerous technical and organisational challenges for the construction and the integration of the instruments into the facility wide infrastructure; notably the EPICS control network with standardised hardware interfaces and the facilities absolute timing system. Additionally the new…
The European Spallation Source (ESS) will provide long neutron pulses for experiments on a suite of different instruments. Most of these will perform neutron data acquisition in event mode, i.e. each detected neutron will be characterised by one absolute timestamp and pixel identifier pair. Slow controls metadata from EPICS, such as sample environment measurements and motor positions, will also be timestamped at their source, so that all data and metadata are streamed as a list of events instead of histograms. A flexible data aggregation and streaming system is being developed combining both o…
European Spallation Source (ESS) will deliver neutrons at high flux for use in diverse neutron scattering techniques. The neutron source facility and the scientific instruments will be located in Lund, and the Data Management and Software Centre (DMSC), in Copenhagen. A number of detector prototypes are being developed at ESS together with its European in-kind partners, for example: SoNDe, Multi-Grid, Multi-Blade and Gd-GEM. These are all position sensitive detectors but use different techniques for the detection of neutrons. Except for digitization of electronics readout, all neutron data is …
The CAMEA ESS neutron spectrometer is designed to achieve a high detection efficiency in the horizontal scattering plane, and to maximize the use of the long pulse European Spallation Source. It is an indirect geometry time-of-flight spectrometer that uses crystal analysers to determine the final energy of neutrons scattered from the sample. Unlike other indirect gemeotry spectrometers CAMEA will use ten concentric arcs of analysers to analyse scattered neutrons at ten different final energies, which can be increased to 30 final energies by use of prismatic analysis. In this report we will out…
A central component of the European Spallation Source is the high-power proton accelerator. The accelerator aims in the future to provide 2 GeV protons to a rotating tungsten target for the production of neutrons at 5 MW of average beam power for neutron scattering studies. Extensive shielding surrounds the accelerator, in order to provide sufficient safety for the public and workers against radiation produced along it's length. This largely comprises several meters of soil, called the berm, and concrete structures located around the accelerator tunnel. However, due to the need for access to t…
A new Small Angle Neutron Scattering instrument is proposed for the European Spallation Source. The pulsed source requires a time-of-flight analysis of the gathered neutrons at the detector. The optimal instrument length is found to be rather large, which allows for a polarizer and a versatile collimation. The polarizer allows for studying magnetic samples and incoherent background subtraction. The wide collimation will host VSANS and SESANS options that increase the resolution of the instrument towards um and tens of um, respectively. Two 1m2 area detectors will cover a large solid angle simu…
The characteristics of the Solid-state Neutron Detector, under development for neutron-scattering measurements at the European Spallation Source, have been simulated with a Geant4-based computer code. The code models the interations of thermal neutrons and ionising radiation in the 6Li-doped scintillating glass of the detector, the production of scintillation light and the transport of optical, scintillation photons through the the scintillator, en route to the photo-cathode of the attached multi-anode photomultiplier. Factors which affect the optical-photon transport, such as surface finish, …
The European Spallation Source (ESS), presently well on its way to completion, will soon provide the most intense neutron beams for multi-disciplinary science. Fortuitously, it will also generate the largest pulsed neutrino flux suitable for the detection of Coherent Elastic Neutrino-Nucleus Scattering (CE$ν$NS), a process recently measured for the first time at ORNL's Spallation Neutron Source. We describe innovative detector technologies maximally able to profit from the order-of-magnitude increase in neutrino flux provided by the ESS, along with their sensitivity to a rich particle physics …
A design study of a horizontal neutron reflectometer adapted to the general baseline of the long pulse European Spallation Source (ESS) is presented. The instrument layout comprises solutions for the neutron guide, high-resolution pulse shaping and beam bending onto a sample surface being so far unique in the field of reflectometry. The length of this instrument is roughly 55 m, enabling $δλ/ λ$ resolutions from 0.5% to 10%. The incident beam is focussed in horizontal plane to boost measurements of sample sizes of 1*1 cm{^2} and smaller with potential beam deflection in both downward and upwar…
Like every megaproject, the European Spallation Source (ESS) currently under construction in Lund, Sweden, has had to make a number of inevitable compromises to remain within budget and on schedule. Some of these compromises carry technical consequences with a potential impact on the operational characteristics of the facility and the neutron scattering instruments in particular. In order to prepare for operation of the facility, it is timely to consider again the subjects of instrument backgrounds and shielding from the project design phase. The expected ranges of instrument backgrounds, and …
European Spallation Source will be the brightest neutron source in the world. It is being built in Lund, Sweden. Over 120 superconducting cavities will be installed in the facility, each regulated by an individual LLRF control system. To reduce the risk associated with testing the systems on real cavities a Cavity Simulator was designed. It reproduces the behaviour of superconducting cavities used in the medium and high beta sections of ESS's Linac. The high power RF amplifier and piezo actuators parameters are also simulated. Based on the RF drive and piezo control signals the Cavity Simulato…
After measuring in 2012 a relatively large value of the neutrino mixing angle $θ_{13}$, the door is now open to observe for the first time a possible CP violation in the leptonic sector. The measured value of $θ_{13}$ also privileges the 2nd oscillation maximum for the discovery of CP violation instead of the usually used 1st maximum. The sensitivity at this 2nd oscillation maximum is about three times higher, with a lower influence of systematic errors, than for the 1st maximum. Going to the 2nd oscillation maximum necessitates a very intense neutrino beam with the appropriate energy. The wor…
The transport of neutrons in long beamlines at spallation neutron sources presents a unique challenge for Monte-Carlo transport calculations. This is due to the need to accurately model the deep-penetration of high-energy neutrons through meters of thick dense shields close to the source and at the same time to model the transport of low-energy neutrons across distances up to around 150 m in length. Typically, such types of calculations may be carried out with MCNP-based codes or alternatively PHITS. However, in recent years there has been an increased interest in the suitability of Geant4 for…
The European Spallation Source (ESS), presently under construction in Lund, Sweden, is a multidisciplinary international laboratory that will operate the world's most powerful pulsed neutron source. Supported by a 3M Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) is now underway to develop a second neutron source below the spallation target. Compared to the first source, located above the spallation target and designed for high cold and thermal brightness, the new source will provide higher intensity, and a shift to longer wavelengths in the s…
The Big Bang should have created equal amounts of matter and antimatter; however today matter remains in the Universe. The European Spallation Source neutrino Super Beam's (ESSnuSB) main objective is to demonstrate the feasibility of using the European Spallation Source (ESS) proton linac to produce the world's most intense neutrino beam simultaneously with the 5 MW proton generation for neutron production and measure the parameters of the neutrino oscillation, leading to the determination of the value of $δCP$. Once it is constructed ESSnuSB project aims to explain the matter/antimatter asymm…
This artcile presents an optimisation of performance and cost of neutron scattering instrumentation at the European Spallation Source. This is done by trading detailed cost functions against beam transmission functions in a multi-dimensional, yet simple, parameter space. On the one hand, the neutron guide cost increases as a power of the desired beam divergence, and inversely with the minimum wavelength, due to the supermirror coating needed. On the other hand, the more neutrons are transported to the instrument the greater are the shielding costs to deal with the gamma rays that result from t…
Very intense neutrino beams and large neutrino detectors will be needed in order to enable the discovery of CP violation in the leptonic sector. We propose to use the proton linac of the European Spallation Source currently under construction in Lund, Sweden to deliver, in parallel with the spallation neutron production, a very intense, cost effective and high performance neutrino beam. The baseline program for the European Spallation Source linac is that it will be fully operational at 5 MW average power by 2022, producing 2 GeV 2.86 ms long proton pulses at a rate of 14 Hz. Our proposal is t…
The violation of Baryon Number, $\mathcal{B}$, is an essential ingredient for the preferential creation of matter over antimatter needed to account for the observed baryon asymmetry in the universe. However, such a process has yet to be experimentally observed. The HIBEAM/NNBAR %experiment program is a proposed two-stage experiment at the European Spallation Source (ESS) to search for baryon number violation. The program will include high-sensitivity searches for processes that violate baryon number by one or two units: free neutron-antineutron oscillation ($n\rightarrow \bar{n}$) via mixing, …
The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontally from the target, and the Experimental Area 2 (EAR2), located 20 m above the target. The target, based on pure lead, is impacted by a high-intensity 20-GeV/c pulsed proton beam. The facility was conceived to study neutron-nucleus interactions for neutron kinetic energies between a few meV to several GeV, with applications of interest for nuc…
The European Spallation Source (ESS) is the world's next generation spallation-based neutron source. The research conducted at ESS will yield in the discovery and development of new materials including the fields of manufacturing, pharmaceuticals, aerospace, engines, plastics, energy, telecommunications, transportation, information technology and biotechnology. The spallation source will deliver an unprecedented neutron flux. In particular, the reflectometers selected for construction, ESTIA and FREIA, have to fulfill challenging requirements. Local incident peak rate can reach 10$^5$~Hz/mm$^2…
In view of the trend towards smaller samples and experiments under extreme conditions it is important to deliver small and homogeneous neutron beams to the sample area. For this purpose, elliptic and/or Montel mirrors are ideally suited as the phase space of the neutrons can be defined far away from the sample. Therefore, only the useful neutrons will arrive at the sample position leading to a very low background. We demonstrate the ease of designing neutron transport systems using simple numeric tools, which are verified using Monte-Carlo simulations that allow to take into account effects of…
A concept to search for a neutron electric dipole moment (nEDM) is presented, which employs a pulsed neutron beam instead of the nowadays established use of storable ultracold neutrons (UCN). The technique takes advantage of the high peak flux and the time structure of a next-generation pulsed spallation source like the planned European Spallation Source. It is demonstrated that the sensitivity for a nEDM can be improved by several orders of magnitude compared to the best beam experiments performed in the 1970's and can compete with the sensitivity of UCN experiments.
FINESSE: A Versatile Beamline for Fundamental Interactions with Neutrons at the European Spallation SourcE
Rio de Janeiro State University（里约热内卢州立大学）；University of Minnesota（明尼苏达大学）；European Spallation Source ERIC（欧洲散裂源）；The Grainger College of Engineering, University of Illinois Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校格兰格工程学院）；Lund University（隆德大学）；Columbia University（哥伦比亚大学）；Oak Ridge National Laboratory（橡树岭国家实验室）；Stockholm University（斯德哥尔摩大学）；Istituto Nazionale di Fisica Nucleare (INFN)（意大利国家核物理研究所）；National Research Council of Italy (CNR)（意大利国家研究委员会）；University of Milano-Bicocca（米兰比可卡大学）；Technical University of Munich（慕尼黑工业大学）；California Institute of Technology（加州理工学院）；Universidad Europea de Valencia（瓦莱西亚欧洲大学）；Polish Academy of Sciences（波兰科学院）；Universidad Autónoma de Zacatecas（萨卡特卡斯自治大学）；Jagiellonian University（雅盖隆大学）；Chalmers University of Technology（查尔姆斯理工大学）；University of Surrey（萨里大学）；University of Tennessee（田纳西大学）；Montclair State University（蒙特克莱尔州立大学）；Chinese Academy of Science（中国科学院）；China Spallation Neutron Source（中国散裂中子源）；Indiana University Bloomington（印第安纳大学伯明顿分校）
We present the development of a specialized concrete for neutron shielding at neutron research facilities, based on the addition of hydrogen atoms in the form of polyethylene and also B$_{4}$C for enhancing the neutron capture properties of the concrete. We show information on the mechanical properties of the concrete and the neutronics, in particular it's relevance to modern spallation neutron sources, such as the European Spallation Source (ESS), currently under construction in Lund, Sweden. The new concrete exhibits a 15% lower mass density, a compressible strength of 50% relative to a stan…
The Multi-Blade is a Boron-10-based gaseous detector developed for neutron reflectometry instruments at the European Spallation Source (ESS) in Sweden. The main challenges for neutron reflectometry detectors are the instantaneous counting rate and spatial resolution. The Multi-Blade has been tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. A campaign of scientific measurements has been performed to study the Multi-Blade response in real instrumental conditions. The results of these tests are discussed in this manuscript.
The neutron activation of shielding materials and the generated decay gamma radiation are well-known issues in terms of occupational exposure. Though the trace elements of shielding concretes can be dominant sources of the produced activity in such cases, their concentrations are often missing from the input data of shielding-related Monte Carlo simulations. For this reason, three concrete types were studied, that were considered in the European Spallation Source (ESS) ERIC. Their composition - including the trace elements - were determined via XRF, PGAA and NAA techniques. Realistic input dat…
The Multi-Blade is a Boron-10-based gaseous thermal neutron detector developed to face the challenge arising in neutron reflectometry at neutron sources. Neutron reflectometers are challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed according to the requirements given by the reflectometers at the European Spallation Source (ESS) in Sweden. The Multi-Blade has been installed and tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. The results on the detailed detector characterization are discussed in thi…
Polarized neutrons are a powerful probe to investigate magnetism in condensed matter on length scales from single atomic distances to micrometers. With the ongoing advancement of neutron optics, that allow to transport beams with increased divergence, the demands on neutron polarizes and analyzers have grown as well. The situation becomes especially challenging for new instruments at pulsed sources, where a large wavelength band needs to be polarized to make efficient use of the time structure of the beam. Here we present a polarization analysis concept for highly focused neutron beams that is…
The European Spallation Source ESS is being constructed in Lund, Sweden, to be the world's brightest cold pulsed spallation neutron source. The facility uses a 2GeV proton beam hitting a target to produce neutrons. The neutrons are then thermalized in a moderator. Surrounding the moderator are several beam ports connected to neutron guides that transport the cold neutrons. Due to the long-pulse source nature of the ESS, neutron scattering instruments are significantly longer than at most existing facilities, with approximately half the instruments requiring neutron guides that are 150 meters l…
A portable neutron scatter camera with isotropic sensitivity
University of Chicago（芝加哥大学）；Donostia International Physics Center（多诺西亚国际物理中心）；BERC Basque Excellence Research Centre（巴斯克卓越研究中心）；University of the Basque Country UPV/EHU（巴斯克地区大学）；Ikerbasque, Basque Foundation for Science（伊克尔巴斯科，巴斯克科学基金会）；IDOM Consulting, Engineering, Architecture, S.A.U.（IDOM咨询、工程、建筑股份公司）
The Multi-Blade is a Boron-10-based gaseous detector introduced to face the challenge arising in neutron reflectometry at pulsed neutron sources. Neutron reflectometers are the most challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed to cope with the requirements set for the reflectometers at the upcoming European Spallation Source (ESS) in Sweden. Based on previous results obtained at the Institut Laue-Langevin (ILL) in France, an improved demonstrator has been built at ESS and tested at the Budapest Neutron Centre (BNC) in H…
The Neutron Spin Echo (NSE) variant MIEZE (Modulation of IntEnsity by Zero Effort), where all beam manipulations are performed before the sample position, offers the possibility to perform low background SANS measurements in strong magnetic fields and depolarising samples. However, MIEZE is sensitive to differences \DeltaL in the length of neutron flight paths through the instrument and the sample. In this article, we discuss the major influence of \DeltaL on contrast reduction of MIEZE measurements and its minimisation. Finally we present a design case for enhancing a small-angle neutron scat…
Inelastic neutron scattering instruments require very low background; therefore the proper shielding for suppressing the scattered neutron background, both from elastic and inelastic scattering is essential. The detailed understanding of the background scattering sources is required for effective suppression. The Multi-Grid thermal neutron detector is an Ar/CO$_{2}$ gas filled detector with a $^{10}$B$_{4}$C neutron converter coated on aluminium substrates. It is a large-area detector design that will equip inelastic neutron spectrometers at the European Spallation Source (ESS). To this end a …
Nowadays neutron scattering science is increasing its instrumental power. Most of the neutron sources in the world are pushing the development of their technologies to be more performing. The neutron scattering development is also pushed by the European Spallation Source (ESS) in Sweden, a neutron facility which has just started construction. Concerning small area detectors (1m^2), the 3He technology, which is today cutting edge, is reaching fundamental limits in its development. Counting rate capability, spatial resolution and cost-effectiveness, are only a few examples of the features that m…
Pulsed beams have tremendous advantages for precision experiments with cold neutrons. In order to minimise and measure systematic effects, they are used at continuous sources in spite of the related substantial decrease in intensity. At the European Spallation Source ESS these experiments will profit from the pulse structure of the source and its 50 times higher peak brightness compared to the most intense reactor facilities, making novel concepts feasible. Therefore, the cold neutron beam facility for particle physics ANNI was proposed as part of the ESS instrument suite. The proposed design …
In this work we present NJOY+NCrystal, a tool to generate thermal neutron scattering libraries with support for coherent and incoherent elastic components for crystalline solid materials. This tool, which is a customized version of NJOY, was created by modifying the nuclear data processing program NJOY to call the thermal scattering software library NCrystal, and includes a proposed change in the ENDF-6 format to store both the coherent and incoherent elastic components. Necessary changes to enable this format in NJOY, as well as to sample it in the OpenMC Monte Carlo code, are detailed here. …
Expanding Neutron Capacity at the ESS through Symbiotic Instruments: SLEIPNIR & Remora
Department of Physics, Technical University of Denmark（丹麦技术大学物理系）；Data Management & Scientific Computing, European Spallation Source ERIC（欧洲散裂源ERIC数据管理与科学计算部）；Spectroscopy Division, European Spallation Source ERIC（欧洲散裂源ERIC光谱学部）；Jülich Centre for Neutron Science（朱利希中子科学中心）；Heinz Maier-Leibnitz Zentrum, Technical University of Munich（慕尼黑大学海因茨·迈尔-莱布尼茨中心）
The NNBAR experiment for the European Spallation Source will search for free neutrons converting to antineutrons with a sensitivity improvement of three orders of magnitude compared to the last such search. This paper describes progress towards a conceptual design report for NNBAR. The design of a moderator, neutron reflector, beamline, shielding and annihilation detector is reported. The simulations used form part of a model which will be used for optimisation of the experiment design and quantification of its sensitivity.
A neutron optical transport system is proposed which comprises nested short elliptical mirrors located halfway between two common focal points M and M'. It images cold neutrons from a diverging beam or a source with finite size at M by single reflections onto a spot of similar size at M'. Direct view onto the neutron source is blocked by a central absorber with little impact on the transported solid angle. Geometric neutron losses due to source size can be kept small using modern supermirrors and distances M-M' of a few tens of metres. Very short flat mirrors can be used in practical implement…
The boron-10 based Multi-Grid detector is being developed as an alternative to helium-3 based neutron detectors. At the European Spallation Source, the detector will be used for time-of-flight neutron spectroscopy at cold to thermal neutron energies. The objective of this work is to investigate fine time- and energy-resolved effects of the Multi-Grid detector, down to a few $μ$eV, while comparing it to the performance of a typical helium-3 tube. Furthermore, it is to characterize differences between the detector technologies in terms of internal scattering, as well as the time reconstruction o…
Over the last decades, the field of thermal neutron detection has overwhelmingly employed He-3-based technologies. The He-3 crisis together with the forthcoming establishment of the European Spallation Source have necessitated the development of new technologies for neutron detection. Today, several promising He-3-free candidates are under detailed study and need to be validated. This validation process is in general long and expensive. The study of detector prototypes using neutron-emitting radioactive sources is a cost-effective solution, especially for preliminary investigations. That said,…
