Multiferroic BiFeO$_3$ (BFO) possesses a rich phase diagram that allows strain tuning of its properties in thin-film form. In particular, at large compressive strain, a supertetragonal (T) phase with giant polarization is stabilized over the more common rhombohedral (R) structure. To utilize the functionality of such metastable BFO phases in device applications, it is essential to understand the ferroelectric phase evolution upon insertion in nanoscale heterostructures. Here, we explore the emergence of ferroelectric phases close to the morphotropic phase boundary in compressively strained BFO during thin-film growth using in-situ optical second harmonic generation. We find that the epitaxial films form at the growth temperature in the ideal T phase without critical thickness for the polarization. Signatures of T-like and R-like monoclinically distorted phases only appear upon sample cooling. We furthermore demonstrate a robustness of single-domain polarization in the high-temperature T phase during the growth of capacitor-like metal|ferroelectric|metal heterostructures. Here, a reduction in tetragonality of the T phase, rather than domain formation, lowers the electrostatic energy. At this lower tetragonality, density-functional calculations and scanning transmission electron microscopy point to the stabilization of a new metastable R-like monoclinic structure upon cooling the heterostructure down to room temperature. Our results thus show that the combination of strain and electrostatic phase stabilization in BFO heterostructures yields a prominent platform for exploring ferroelectric phases and realizing ultrathin ferroelectric devices.
The morphotropic phase boundary (MPB) in the magnetoelectric multiferroic BiFeO3-PbTiO3 is shown to be uniquely dependent on crystallite size. The system exhibits the phenomenon of abnormal grain growth (AGG) during sintering with abrupt increase in the grain size from ~ 1 micron to ~ 10 microns. The large sized free crystallites (10 microns) exhibit pure tetragonal phase. Phase coexistence sets in after reducing the size to ~ 1 micron. These results prove that size, and not the internal stress, as the controlling mechanism for stabilizing phase coexistence in this system.
We present an ab initio study of the BFCO solid solution formed by multiferroics BiFeO3 (BFO) and BiCoO3 (BCO). We find that BFCO presents a strongly discontinuous morphotropic transition between BFO-like and BCO-like ferroelectric phases. Further, for all compositions such phases remain (meta)stable and retain well-differentiated properties. Our results thus suggest that an electric field can be used to switch between these structures, and show that such a switching involves large phase-change effects of various types, including piezoelectric, electric, and magnetoelectric ones.
We have investigated heteroepitaxial films of Sm-doped BiFeO3 with a Sm-concentration near a morphotropic phase boundary. Our high-resolution synchrotron X-ray diffraction, carried out in a temperature range of 25C to 700C, reveals substantial phase coexistence as one changes temperature to crossover from a low-temperature PbZrO3-like phase to a high-temperature orthorhombic phase. We also examine changes due to strain for films greater or less than the critical thickness for misfit dislocation formation. Particularly, we note that thicker films exhibit a substantial volume collapse associated…
Sm-doped BiFeO3 compacted powders with composition across the morphotropic phase boundary region were prepared by sol-gel method. Crystal structure, morphology and magnetic state of the compounds were analyzed as a function of dopant concentration, temperature and external pressure using synchrotron and laboratory X-ray diffraction, electron microscopy, Raman and Mossbauer spectroscopy. Application of external pressure shifts the phase transition from the rhombohedral structure to the nonpolar orthorhombic structure towards lower concentration of the dopant content, wherein the amount of the a…
Samarium substituted bismuth ferrite (BiFeO3) ceramics prepared by sol-gel synthesis method were studied using both local scale and microscopic measurement techniques in order to clarify an evolution of the crystal structure of the compounds across the morphotropic phase boundary region. X-ray diffraction analysis, transmission and scanning electron microscopies, XPS, EDS/EDX experiments and piezoresponse force microscopy were used to study the structural transitions from the polar active rhombohedral phase to the anti-polar orthorhombic phase and then to the non-polar orthorhombic phase, obse…
Here, we report the unusual behaviour shown by the (BiFeO3)1-x-(PbTiO3)x (BF-xPT) films prepared using a multilayer deposition approach by chemical solution deposition method. Thin film samples of various compositions were prepared by depositing several bilayers of BF and PT precursors by varying the BF or PT layer thicknesses. X-ray diffraction showed that final samples of all compositions show mixing of the two compounds resulting in a single phase mixture, also confirmed by transmission electron microscopy. In contrast to bulk equilibrium compositions, our samples show a monoclinic (MA type…
A correlation between the crystal structure and magnetic properties of system (1-x)BiFeO$_3$-(x)BaTiO$_3$ with compounds across the morphotropic phase boundary was studied using X-ray and neutron diffraction, magnetometry, and Mossbauer spectroscopy measurements. Increase in the dopants content leads to the structural transition from the rhombohedral phase to the cubic phase via a formation of the two-phase region (0.2 < x < 0.33), wherein the magnetic structure changes from the modulated G-type antiferromagnetic to the collinear antiferromagnetic via a stabilization of the non-collinear antif…
We report on the evolution of the magnetic structure of BiFeO3 thin films grown on SrTiO3 substrates as a function of Sm doping. We determined the magnetic structure using neutron diffraction. We found that as Sm increases, the magnetic structure evolves from a cycloid to a G-type antiferromagnet at the morphotropic phase boundary, where there is a large piezoelectric response due to an electric-field induced structural transition. The occurrence of the magnetic structural transition at the morphotropic phase boundary offers another route towards room temperature multiferroic devices.
A morphotropic phase boundary driven by epitaxial strain has been observed in a lead-free multiferroic BiFeO3 thin films and the strain-driven phase transitions were widely reported to be iso-symmetric Cc-Cc ones by recent works. In this paper, we suggest that the tetragonal-like BiFeO3 phase identified in epitaxial films on (001) LaAlO3 single crystal substrates is monoclinic MC. This MC phase is different from MA type monoclinic phase reported in BiFeO3 films grown on low mismatch substrates, such as SrTiO3. This is confirmed not only by synchrotron x-ray studies but also by piezoresponse fo…
We report on the discovery of a lead-free morphotropic phase boundary in Sm doped BiFeO3 with a simple perovskite structure using the combinatorial thin film strategy. The boundary is a rhombohedral to pseudo-orthorhombic structural transition which exhibits a ferroelectric (FE) to antiferroelectric (AFE) transition at approximately Bi0.86Sm0.14FeO3 with dielectric constant and out-of-plane piezoelectric coefficient comparable to those of epitaxial (001) oriented Pb(Zr,Ti)O3 (PZT) thin films at the MPB. The discovered composition may be a strong candidate of a Pb-free piezoelectric replacement…
The structural and ferroelectric domain variants of highly-strained BiFeO3 films grown on vicinal LaSrAlO4 substrates were studied by piezoelectric force microscopy and high-resolution X-ray reciprocal space mapping. Through symmetry breaking of the substrate surface, ferroelastic domain variants in the highly-strained MC phase BiFeO3 can be greatly reduced. Single-domain film can be obtained on substrates with large miscut angle, which is accompanied by the reduction of structural variants in the mixed-phase nanodomains. These findings lead to better understanding of the phase evolution and p…
The novel strain-driven morphotropic phase boundary (MPB) in highly-strained BiFeO3 thin film is featured by ordered mixed phase nanodomains (MPNs). Through scanning probe microscopy and synchrotron X-ray diffraction, eight structural variants of the MPNs are identified. Detailed polarization configurations within the MPNs are resolved using angular-dependent piezoelectric force microscopy. Guided by the obtained results, deterministic manipulation of the MPNs has been demonstrated by controlling the motion of the local probe. These findings are important for in-depth understanding of the ultr…
The structural evolution of the strain-driven morphotropic phase boundary (MPB) in BiFeO3 films has been investigated using synchrotron x-ray diffractometry in conjunction with scanning probe microscopy. Our results demonstrate the existence of mixed-phase regions that are mainly made up of two heavily tilted ferroelectric triclinic phases. Analysis of first-principles computations suggests that these two triclinic phases originate from a phase separation of a single monoclinic state accompanied by elastic matching between the phase-separated states. These first-principle calculations further …
Piezoelectrics interconvert mechanical energy and electric charge and are widely used in actuators and sensors. The best performing materials are ferroelectrics at a morphotropic phase boundary (MPB), where several phases can intimately coexist. Switching between these phases by electric field produces a large electromechanical response. In the ferroelectric BiFeO$_3$, strain can be used to create an MPB-like phase mixture and thus to generate large electric field dependent strains. However, this enhanced response occurs at localized, randomly positioned regions of the film, which potentially …
Here, we report the existence of large remnant polarization and dielectric constant in PbTiO3 buffered polycrystalline (BiFeO_3)_{1-x} (PbTiO_3)_x thin films of composition x = 0.25, 0.30 and 0.35 around the morphotropic phase boundary. The films were deposited by chemical solution deposition on platinized silicon substrates. Films reveal a perovskite structure with a tendency to retain rhombohedral structure even at higher PbTiO_3 content than that reported in bulk. We observe very large remnant polarization, ~75 microC/cm^2, and high dielectric constant, ~2400 at 1 kHz for x = 0.3, which lie…
The perovskite (1-x)YMnO$_3$-xBiFeO$_3$ binary system is very promising because of its multiferroic end members. Nanocrystalline phases have been recently obtained by mechanosynthesis across the system, and the perovskite structural evolution has been described. Two continuous solid solutions with orthorhombic Pnma and rhombohedral R3c symmetries were found, which coexist within a broad compositional interval of 0.5 < x < 0.9. This might be a polar-nonpolar morphotropic phase boundary region, at which strong phase-change magnetoelectric responses can be expected. A major issue is phase decompo…
The recent discovery of a stress-induced structural phase transition in the single-component perovskite BiFeO3 has revived interest in this lead-free ferroelectric. The coexistence of different phases may lead to large piezoelectric coefficients, a property typically associated with complex solid solutions of lead-based perovskites. Here we report combined experimental and computational results showing that the stress-induced phase transitions in BiFeO3 follow the path of rhombohedral(R)-to-monoclinic(MA)-to-monoclinic(MC)-to-tetragonal(T), where both MC and T show highly enhanced c/a ratios. …
The absorption performance in the BiFeO$_3$/TiO$_2$ bilayer film prepared by simple sol-gel method has been significantly improved in the ultraviolet and visible-light region, comparing with BiFeO$_3$ and TiO$_2$ films. Terahertz-radiation emission presents a direct evidence of photon-induced electrons and holes transport in the heterostructures. First-principles calculations agree well with the experiments and present an unambiguous explanation of charge carriers transport and enhanced absorbance which is induced by the large electrostatic potential drop in the interface of heterostructures w…
Bismuth ferrite is one of the most widely studied multiferroic materials because of its large ferroelectric polarisation coexisting with magnetic order at room temperature. Using density functional theory (DFT), we identify several previously unknown polar and non-polar structures within the low-energy phase space of perovskite-structure bismuth ferrite, BiFeO$_3$. Of particular interest is a series of non-centrosymmetric structures with polarisation along one lattice vector, combined with anti-polar distortions, reminiscent of ferroelectric domains, along a perpendicular direction. We discuss…
We report a study on the thermodynamic stability and structure analysis of the epitaxial BiFeO3 (BFO) thin films grown on YAlO3 (YAO) substrate. First we observe a phase transition of MC-MA-T occurs in thin sample (<60 nm) with an utter tetragonal-like phase (denoted as MII here) with a large c/a ratio (~1.23). Specifically, MII phase transition process refers to the structural evolution from a monoclinic MC structure at room temperature to a monoclinic MA at higher temperature (150oC) and eventually to a presence of nearly tetragonal structure above 275oC. This phase transition is further con…
Despite the technological significance of the tetragonal PbTiO3 for the piezoelectric transducer industry, its high pressure behaviour is quite controversial as two entirely different scenarios, involving pressure induced (1) morphotropic phase boundary (MPB) like structural transition with concomitant rotation of the ferroelectric polarization vector and (2) antiferrodistortive (AFD) phase transition followed by emergence of a reentrant ferroelectric phase, have been proposed in recent theoretical and experimental studies. We have attempted to address these controversies through a high resolu…
Design of novel artificial materials based on ferroelectric perovskites relies on the basic principles of electrostatic coupling and in-plane lattice matching. These rules state that the out-of-plane component of the electric displacement field and the in-plane components of the strain are preserved across a layered superlattice, provided that certain growth conditions are respected. Intense research is currently directed at optimizing materials functionalities based on these guidelines, often with remarkable success. Such principles, however, are of limited practical use unless one disposes o…
We present a systematic approach to modeling the electrical and structural properties of charge-mismatched superlattices from first principles. Our strategy is based on bulk calculations of the parent compounds, which we perform as a function of in-plane strain and out-of-plane electric displacement field. The resulting two-dimensional phase diagrams allow us to accurately predict, without performing further calculations, the behavior of a layered heterostructure where the aforementioned building blocks are electrostatically and elastically coupled, with an arbitrary choice of the interface ch…
The coexistence of different ferroelectric phases enables the tunability of the macroscopic properties and extensive applications from piezoelectric transducers to nonvolatile memories. Here we develop a thermodynamic model to predict the stability and low-energy orientations of boundaries between different phases in ferroelectrics. Taking lead zirconate titanate and bismuth ferrite as two examples, we demonstrate that the low-energy orientations of interphase boundaries are largely determined by minimizing the electrostatic and elastic energies. Phase-field simulations are employed to analyze…
The evolution of the atomic structures of the combinatorial library of Sm-substituted thin film BiFeO3 along the phase transition boundary from the ferroelectric rhombohedral phase to the non-ferroelectric orthorhombic phase is explored using scanning transmission electron microscopy (STEM). Localized properties including polarization, lattice parameter, and chemical composition are parameterized from atomic-scale imaging and their causal relationships are reconstructed using a linear non-Gaussian acyclic model (LiNGAM). This approach is further extended toward exploring the spatial variabilit…
In this work, we report a massively parallel and time domain implementation of the 3D phase field model that can reach beyond micron scale and consider for arbitrary electrical and mechanical boundary conditions. The first part of the paper describes the theory and the numerical implementation of the model. A mixed-mode approach of finite difference and finite element grid has been used for calculating the nonlocal electrostatic and elastic interactions respectively. All the local and non-local interactions are shown to scale linearly up to thousands of processors. This massive parallelization…
In purely c-axis oriented PbZr$_{0.2}$Ti$_{0.8}$O$_3$ ferroelectric thin films, a lateral piezoresponse force microscopy signal is observed at the position of 180°domain walls, where the out-of-plane oriented polarization is reversed. Using electric force microscopy measurements we exclude electrostatic effects as the origin of this signal. Moreover, our mechanical simulations of the tip/cantilever system show that the small tilt of the surface at the domain wall below the tip does not satisfactorily explain the observed signal either. We thus attribute this lateral piezoresponse at domain wal…
We present a first-principles density functional study of the structural, electronic and magnetic properties of the ferroelectric domain walls in multiferroic BiFeO3. We find that domain walls in which the rotations of the oxygen octahedra do not change their phase when the polarization reorients are the most favorable, and of these the 109 degree domain wall centered around the BiO plane has the lowest energy. The 109 degree and 180 degree walls have a significant change in the component of their polarization perpendicular to the wall; the corresponding step in the electrostatic potential is …
Using heterostructures that combine a large-polarization ferroelectric (BiFeO3) and a high-temperature superconductor (YBa2Cu3O7-δ), we demonstrate the modulation of the superconducting condensate at the nanoscale via ferroelectric field effects. Through this mechanism, a nanoscale pattern of normal regions that mimics the ferroelectric domain structure can be created in the superconductor. This yields an energy landscape for magnetic flux quanta and, in turn, couples the local ferroelectric polarization to the local magnetic induction. We show that this form of magnetoelectric coupling, toget…
Dielectric response and conduction mechanism were investigated for a multiferroic BiFe$_{0.95}$Mn$_{0.05}$O$_3$ epitaxial thin film. A contribution from a thermally activated interface (0.37 eV) and the bulk of the film on the dielectric response were observed through the comparison between experimental results and equivalent circuit model. The low frequency interface relaxation signatures strongly suggest a Maxwell-Wagner space charge origin. The alternative current conductivity deduced from the model follows a power law frequency dependence suggesting a polaronic hopping mechanism while the …
For advanced applications in modern industry it is very important to reduce the volume of ferroelectric nanoparticles without serious deterioration of their polar properties. In many practically important cases fixed volume (rather than fixed size) corresponds to realistic technological conditions of nanoparticles fabrication. The letter is focused on the theoretical study of the behavior of ferroelectric polarization, paramagnetoelectric coefficient and phase diagrams of semi-ellipsoidal nanoparticles with fixed volume V. Our approach combines the Landau-Ginzburg-Devonshire phenomenology, cla…
University of Tennessee, Knoxville（田纳西大学诺克斯维尔分校）；Pacific Northwest National Laboratory（太平洋西北国家实验室）；University of Maryland, College Park（马里兰大学帕克分校）；The Pennsylvania State University（宾夕法尼亚州立大学）
