Cellular-based networks are expected to offer connectivity for massive Internet of Things (mIoT) systems. However, their Random Access CHannel (RACH) procedure suffers from unreliability, due to the collision from the simultaneous massive access. Despite that this collision problem has been treated in existing RACH schemes, these schemes usually organize IoT devices' transmission and re-transmission along with fixed parameters, thus can hardly adapt to time-varying traffic patterns. Without adaptation, the RACH procedure easily suffers from high access delay, high energy consumption, or even access unavailability. With the goal of improving the RACH procedure, this paper targets to optimize the RACH procedure in real-time by maximizing a long-term hybrid multi-objective function, which consists of the number of access success devices, the average energy consumption, and the average access delay. To do so, we first optimize the long-term objective in the number of access success devices by using Deep Reinforcement Learning (DRL) algorithms for different RACH schemes, including Access Class Barring (ACB), Back-Off (BO), and Distributed Queuing (DQ). The converging capability and efficiency of different DRL algorithms including Policy Gradient (PG), Actor-Critic (AC), Deep Q-Network (DQN), and Deep Deterministic Policy Gradients (DDPG) are compared. Inspired by the results from this comparison, a decoupled learning strategy is developed to jointly and dynamically adapt the access control factors of those three access schemes. This decoupled strategy first leverage a Recurrent Neural Network (RNN) model to predict the real-time traffic values of the network environment, and then uses multiple DRL agents to cooperatively configure parameters of each RACH scheme.
Internet-of-Things (IoT) refers to a massively heterogeneous network formed through smart devices connected to the Internet. In the wake of disruptive IoT with a huge amount and variety of data, Machine Learning (ML) and Deep Learning (DL) mechanisms will play a pivotal role to bring intelligence to the IoT networks. Among other aspects, ML and DL can play an essential role in addressing the challenges of resource management in large-scale IoT networks. In this article, we conduct a systematic and in-depth survey of the ML- and DL-based resource management mechanisms in cellular wireless and I…
The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, …
One of the main use cases for advanced cellular networks is represented by massive Internet-of-things (MIoT), i.e., an enormous number of IoT devices that transmit data toward the cellular network infrastructure. To make cellular MIoT a reality, data transfer and control procedures specifically designed for the support of IoT are needed. For this reason, 3GPP has introduced the Control Plane Cellular IoT optimization, which foresees a simplified bearer instantiation, with the Mobility Management Entity (MME) handling both control and data traffic. The performance of the MME has therefore becom…
The number of connected Internet of Things (IoT) devices within cyber-physical infrastructure systems grows at an increasing rate. This poses significant device management and security challenges to current IoT networks. Among several approaches to cope with these challenges, data-based methods rooted in deep learning (DL) are receiving an increased interest. In this paper, motivated by the upcoming surge of 5G IoT connectivity in industrial environments, we propose to integrate a DL-based anomaly detection (AD) as a service into the 3GPP mobile cellular IoT architecture. The proposed architec…
Fifth generation (5G) networks are expected to connect a huge number of Internet of Things (IoT) devices in many usage scenarios. The challenges of typical massive IoT applications with sporadic and short packet uplink transmissions are well studied, while not enough attention is given to the delivery of content of common interest, such as software/firmware updates and remote control, towards IoT devices in emerging point-to-multipoint scenarios. Moreover, the delivery of delay-sensitive IoT traffic is not sufficiently addressed in the literature. In this work we (i) identify the drawbacks of …
The adoption of Internet of Things (IoT) technologies is increasing and thus IoT is seemingly shifting from hype to reality. However, the actual use of IoT over significant timescales has not been empirically analyzed. In other words the reality remains unexplored. Furthermore, despite the variety of IoT verticals, the use of IoT across vertical industries has not been compared. This paper uses a two-year IoT dataset from a major Finnish mobile network operator to investigate different aspects of cellular IoT traffic including temporal evolution and the use of IoT devices across industries. We…
Support for things roaming internationally has become critical for Internet of Things (IoT) verticals, from connected cars to smart meters and wearables, and explains the commercial success of Machine-to-Machine (M2M) platforms. We analyze IoT verticals operating with connectivity via IoT SIMs, and present the first large-scale study of commercially deployed IoT SIMs for energy meters. We also present the first characterization of an operational M2M platform and the first analysis of the rather opaque associated ecosystem. For operators, the exponential growth of IoT has meant increased stress…
In the modern world, the connectivity-as-we-go model is gaining popularity. Internet-of-Things (IoT) envisions a future in which human beings communicate with each other and with devices that have identities and virtual personalities, as well as sensing, processing, and networking capabilities, which will allow the developing of smart environments that operate with little or no human intervention. In such IoT environments, that will have battery-operated sensors and devices, energy efficiency becomes a fundamental concern. Thus, energy-efficient (EE) connectivity is gaining significant attenti…
Code-expanded Random Access (CeRA) is a promising technique for supporting mMTC in cellular IoT networks. However, its potentiality is limited by code ambiguity, which results from the inference of a larger number of codewords than those actually transmitted. In this letter, we propose a random access scheme to alleviate this problem by allowing devices to select the preambles to be transmitted considering a q-ary code with maximum average distance. Moreover, a CeRA decoding approach based on hypergraphs is proposed and an analytical model is derived. Numerical results show that the proposed s…
This paper investigates the system outage performance of a useful architecture of two-way hybrid visible light communication/radio frequency (VLC/RF) communication using overlay mode of cooperative cognitive radio network (CCRN). The demand of high data rate application can be fulfilled using VLC link and communication over a wide area of coverage with high reliability can be achieved through RF link. In the proposed architecture, cooperative communication between two licensed user (LU) nodes is accomplished via an aggregation agent (AA). AA can perform like a relay node and in return, it can …
With the emergence of Internet-of-Things (IoT) and ever-increasing demand for the newly connected devices, there is a need for more effective storage and processing paradigms to cope with the data generated from these devices. In this study, we have discussed different paradigms for data processing and storage including Cloud, Fog, and Edge computing models and their suitability in integrating with the IoT. Moreover, a detailed discussion on low latency and massive connectivity requirements of future cellular networks in accordance with machine-type communication (MTC) is also presented. Furth…
Internet-of-things (IoT) is gaining popularity in recent times. Cellular network can be an appropriate solution for the IoT connectivity. With the exponential increase in the number of connected IoT devices, energy consumption is a bottleneck for wireless connectivity solutions. In this work, we proposed a scheme to decrease the power consumption of a base station of a cell. The maximum power consumption of a base station is associated with its data processing, routing, and transmission. Our scheme reduce the size of the transmission data which ultimately reduce the power consumption associate…
Developing low-power wide-area network (LPWAN) solutions that are efficient to adopt, deploy and maintain are vital for smart cities. The poor quality-of-service of unlicensed LPWAN, and the high service cost of LTE-M/NB-IoT are key disadvantages of these technologies. Concatenating unlicensed with licensed LPWANs can overcome these limitations and harness their benefits. However, a concatenated LPWAN architecture will inevitably result in excess latency which may impact users' quality-of-experience (QoE). To evaluate the real-life feasibility of this system, we first propose a concatenated LP…
The evolution of mobile cellular networks has brought great changes of network architecture. For example, heterogeneous cellular network (HetNet) and Ultra dense network (UDN) have been proposed as promising techniques for 5G systems. Dense deployment of base stations (BSs) allows a mobile user to be able to access multiple BSs. Meanwhile the unbalance between UL and DL in HetNets, such as different received SINR threshold and traffic load, etc., becomes increasingly obvious. All these factors naturally inspire us to consider decoupling of uplink and downlink in radio access network. An intere…
The cellular internet of things (CIoT) has become an important branch to cater various applications of IoT devices. Within CIoT, the radio resource control (RRC) layer is responsible for fundamental functionalities such as connection control and bearer establishment in radio access network (RAN). The emergence of various IoT scenarios and diversified service requirements have made both RAN slicing and intelligent control imperative requirement in RRC layer. This paper focuses on enhancing standardized capabilities of CIoT RRC layer, by designing and implementing a new architecture which accomm…
Internet of things (IoT) changes significantly the requirements for connectivity, mainly with regards to long battery life, low device cost, low deployment cost, extended coverage and support for a massive number of devices. Driven from these requirements, several different cellular and non-cellular low power wide area network (LPWAN) solutions are emerging and competing for IoT business and the overall connectivity market. Motivated by this, in this paper, we review and compare the design specifications of different LPWAN solutions, as well as, we discuss their suitability for different IoT a…
The Internet of Things (IoT) is a promising paradigm to accommodate massive device connections in 5G and beyond. To pave the way for future IoT, the spectrum should be planed in advance. Spectrum sharing is a preferable solution for IoT due to the scarcity of available spectrum resource. In particular, mobile operators are inclined to exploit the existing standards and infrastructures of current cellular networks and deploy IoT within licensed cellular spectrum. Yet, proprietary companies prefer to deploy IoT within unlicensed spectrum to avoid any licence fee. In this paper, we provide a surv…
Narrowband Internet of Things (NB-IoT) is a new cellular technology introduced in 3GPP Release 13 for providing wide-area coverage for the Internet of Things (IoT). This article provides an overview of the air interface of NB-IoT. We describe how NB-IoT addresses key IoT requirements such as deployment flexibility, low device complexity, long battery life time, support of massive number of devices in a cell, and significant coverage extension beyond existing cellular technologies. We also share the various design rationales during the standardization of NB-IoT in Release 13 and point out sever…
Recent study predicts that by 2020 up to 50 billion IoT devices will be connected to the Internet, straining the capacity of wireless network that has already been overloaded with data-hungry mobile applications, such as high-definition video streaming and virtual reality(VR)/augmented reality(AR). How to accommodate the demand for both massive scale of IoT devices and high-speed cellular services in the physically limited spectrum without significantly increasing the operational and infrastructure costs is one of the main challenges for operators. In this article, we introduce a new multi-ope…
Cell association in cellular networks is an important aspect that impacts network capacity and eventually quality of experience. The scope of this work is to investigate the different and generalized cell association (CAS) strategies for Device-to-Device (D2D) communications in a cellular network infrastructure. To realize this, we optimize D2D-based cell association by using the notion of uplink and downlink decoupling that was proven to offer significant performance gains. We propose an integer linear programming (ILP) optimization framework to achieve efficient D2D cell association that min…
The Narrowband Internet of Things (NB-IoT) is a cellular access technology developed by the Third Generation Partnership Project (3GPP) to provide wide area connectivity for the Internet of Things. Since its introduction in 3GPP Release 13, NB-IoT has in a few years achieved a remarkable market presence and is currently providing coverage in close to 100 countries. To further extend the reach of NB-IoT and to connect the unconnected, 3GPP Release 17 will study the feasibility of adapting NB-IoT to support non-terrestrial networks (NTNs). In this article, we review the fundamentals of NB-IoT an…
Massive Machine Type Communication (mMTC) to serve billions of IoT devices is considered to open a potential new market for the next generation cellular network. Legacy cellular networks cannot meet the requirements of emerging mMTC applications, since they were designed for human-driven services. In order to provide supports for mMTC services, current research and standardization work focus on the improvement and adaptation of legacy networks. However, these solutions face challenges to enhance the service availability and improve the battery life of mMTC devices simultaneously. In this artic…
The forthcoming 5G cellular network is expected to overlay millimeter-wave (mmW) transmissions with the incumbent micro-wave (μW) architecture. The overall mm-μW resource management should therefore harmonize with each other. This paper aims at maximizing the overall downlink (DL) rate with a minimum uplink (UL) rate constraint, and concludes: mmW tends to focus more on DL transmissions while μW has high priority for complementing UL, under time-division duplex (TDD) mmW operations. Such UL dedication of μW results from the limited use of mmW UL bandwidth due to excessive power consumption and…
The introduction of Narrowband Internet of Things (NB-IoT) as a cellular IoT technology aims to support massive Machine-Type Communications applications. These applications are characterized by massive connections from a large number of low-complexity and low-power devices. One of the goals of NB-IoT is to improve coverage extension beyond existing cellular technologies. In order to do that, NB-IoT introduces transmission repetitions and different bandwidth allocation configurations in uplink. These new transmission approaches yield many transmission options in uplink. In this paper, we propos…
Cellular Internet of Things (IoT) is considered as de facto paradigm to improve the communication and computation systems. Cellular IoT connects massive number of physical and virtual objects to the Internet using cellular networks. The latest generation of cellular networks, e.g. fifth-generation (5G), use evolutionary and revolutionary technologies to notably improve the performance of wireless networks. However, given the envisioned new use-cases, e.g., holographic communication, and the ever-increasing deployment of massive smart-physical end-devices in IoT, the volume of network traffic h…
Narrowband Internet of Things (NB-IoT) technology was introduced in 3GPP Release 13 to accommodate device-generated traffic over cellular networks. There have been efforts in Release 14 to deliver further improvements to facilitate the deployment of Internet of Things (IoT) use cases, such as coverage enhancement, and support for low cost, low complexity and low power consumption device. Small cell NB-IoT is added as an attractive feature in 3GPP Release 15. In this article, we provide an overview of this feature and try to shed light on major aspects of small cell deployment in NB-IoT systems…
Emerged as a promising solution for future wireless communication systems, intelligent reflecting surface (IRS) is capable of reconfiguring the wireless propagation environment by adjusting the phase-shift of a large number of reflecting elements. To quantify the gain achieved by IRSs in the radio frequency (RF) powered Internet of Things (IoT) networks, in this work, we consider an IRS-assisted cellular-based RFpowered IoT network, where the cellular base stations (BSs) broadcast energy signal to IoT devices for energy harvesting (EH) in the charging stage, which is utilized to support the up…
The Internet of Things (IoT) is large-scale by nature. This is not only manifested by the large number of connected devices, but also by the high volumes of traffic that must be accommodated. Cellular networks are indeed a natural candidate for the data tsunami the IoT is expected to generate in conjunction with legacy human-type traffic. However, the random access process for scheduling request represents a major bottleneck to support IoT via LTE cellular networks. Accordingly, this paper develops a mathematical framework to model and study the random access channel (RACH) scalability to acco…
Massive machine type communications (mMTC) is one of the cornerstone services that have to be supported by 5G systems. 3GPP has already introduced LTE-M and NB-IoT, often referred to as cellular IoT, in 3GPP Releases 13, 14, and 15 and submitted these technologies as part of 3GPP IMT-2020 (i.e., 5G) technology submission to ITU-R. Even though NB-IoT and LTE-M have shown to satisfy 5G mMTC requirements defined by ITU-R, it is expected that these cellular IoT solutions will not address all aspects of IoT and ongoing digitalization, including the support for direct communication between "things" …
The popularity of cellular internet of things (IoT) is increasing day by day and billions of IoT devices will be connected to the internet. Many of these devices have limited battery life with constraints on transmit power. High user power consumption in cellular networks restricts the deployment of many IoT devices in 5G. To enable the inclusion of these devices, 5G should be supplemented with strategies and schemes to reduce user power consumption. Therefore, we present a novel joint uplink user association and resource allocation scheme for minimizing user transmit power while meeting the q…
To date, group-oriented communications have been mainly exploited for delivering multimedia services in human-oriented communications while, in future fifth generation (5G) cellular networks, objects will be the main target. Internet of Things (IoT) will undoubtedly play a key role in 5G networks, wherein massive machine-type communications (mMTC) feature a use case as crucial as challenging since cellular IoT connections are predicted to grow heavily in the next future. To boost capacity and energy efficiency, the 5G network can leverage device-to-device (D2D) communications which are recogni…
Machine-to-Machine (M2M) communication is crucial in developing Internet of Things (IoT). As it is well known that cellular networks have been considered as the primary infrastructure for M2M communications, there are several key issues to be addressed in order to deploy M2M communications over cellular networks. Notably, the rapid growth of M2M traffic dramatically increases energy consumption, as well as degrades the performance of existing Human-to-Human (H2H) traffic. Sustainable operation technology and resource management are efficacious ways for solving these issues. In this paper, we i…
Narrowband internet of things (NB-IoT) is an emerging cellular technology that will provide improved coverage for massive number of low-throughput low-cost devices with low device power consumption in delay-tolerant applications. A new single tone signal with frequency hopping has been designed for NB-IoT physical random access channel (NPRACH). In this letter we describe this new NPRACH design and explain in detail the design rationale. We further propose possible receiver algorithms for NPRACH detection and time-of-arrival estimation. Simulation results on NPRACH performance including detect…
NarrowBand-Internet of Things (NB-IoT) is an emerging cellular-based technology that offers a range of flexible configurations for massive IoT radio access from groups of devices with heterogeneous requirements. A configuration specifies the amount of radio resources allocated to each group of devices for random access and for data transmission. Assuming no knowledge of the traffic statistics, the problem is to determine, in an online fashion at each Transmission Time Interval (TTI), the configurations that maximizes the long-term average number of IoT devices that are able to both access and …
Heterogeneous network (HetNet) is a specified cellular platform to tackle the rapidly growing anticipated data traffic. From communications perspective, data loads can be mapped to energy loads that are generally placed on the operator networks. Meanwhile, renewable energy aided networks offer to curtail fossil fuel consumption, so to reduce environmental pollution. This paper proposes a renewable energy based power supply architecture for off-grid HetNet using a novel energy sharing model. Solar photovoltaic (PV) along with sufficient energy storage devices are used for each macro, micro, pic…
The efficient deployment of Internet of Things (IoT) over cellular networks, such as Long Term Evolution (LTE) or the next generation 5G, entails several challenges. For massive IoT, reducing the energy consumption on the device side becomes essential. One of the main characteristics of massive IoT is small data transmissions. To improve the support of them, the 3GPP has included two novel optimizations in LTE: one of them based on the Control Plane (CP), and the other on the User Plane (UP). In this paper, we analyze the average energy consumption per data packet using these two optimizations…
This paper presents the design and implementation of signaling splitting scheme in hyper-cellular network on a software defined radio platform. Hyper-cellular network is a novel architecture of future mobile communication systems in which signaling and data are decoupled at the air interface to mitigate the signaling overhead and allow energy efficient operation of base stations. On an open source software defined radio platform, OpenBTS, we investigate the feasibility of signaling splitting for GSM protocol and implement a novel system which can prove the proposed concept. Standard GSM handse…
The unlicensed spectrum, although free, has become an invaluable resource toward enabling massive Internet-of-things (IoT) applications, where Internet-enabled devices are deployed at a large scale. However, realizing massive IoT connectivity over unlicensed bands requires efficient spectrum sharing among IoT devices and fair coexistence with other wireless networks. In this article, we discuss several spectrum sharing methods to address these intra- and inter-network sharing issues. To this end, we first consider ALOHA-based networks that avoid spectrum sensing, yet rely on diversity to impro…
As the most well-known application of the Internet of Things (IoT), remote monitoring is now pervasive. In these monitoring applications, information usually has a higher value when it is fresher. A new metric, termed the age of information (AoI), has recently been proposed to quantify the information freshness in various IoT applications. This paper concentrates on the design and analysis of age-oriented random access for massive IoT networks. Specifically, we devise a new stationary threshold-based age-dependent random access (ADRA) protocol, in which each IoT device accesses the channel wit…
Connectivity is probably the most basic building block of the Internet of Things (IoT) paradigm. Up to know, the two main approaches to provide data access to the \emph{things} have been based either on multi-hop mesh networks using short-range communication technologies in the unlicensed spectrum, or on long-range, legacy cellular technologies, mainly 2G/GSM, operating in the corresponding licensed frequency bands. Recently, these reference models have been challenged by a new type of wireless connectivity, characterized by low-rate, long-range transmission technologies in the unlicensed sub-…
The widespread adoption of 5G cellular technology will evolve as one of the major drivers for the growth of IoT-based applications. In this paper, we consider a Service Provider (SP) that launches a smart city service based on IoT data readings: in order to serve IoT data collected across different locations, the SP dynamically negotiates and rescales bandwidth and service functions. 5G network slicing functions are key to lease an appropriate amount of resources over heterogeneous access technologies and different site types. Also, different infrastructure providers will charge slicing servic…
One of the main drivers of 5G cellular networks is provision of connectivity service for various Internet of Things (IoT) devices. Considering the potential volume of IoT devices at a global scale, the next leap is to integrate Non-Terrestrial Networks (NTN) into 5G terrestrial systems, thereby extend the coverage and complement the terrestrial service. This paper focuses on the use of Low-Earth Orbit (LEO) satellite constellations for two specific purposes: offloading and backhauling. The former allows offloading IoT traffic from a congested terrestrial network, usually in a very dense area. …
In this article, we present the major challenges of future machine-to-machine (M2M) cellular networks such as spectrum scarcity problem, support for low-power, low-cost, and numerous number of devices. As being an integral part of the future Internet-of-Things (IoT), the true vision of M2M communications cannot be reached with conventional solutions that are typically cost inefficient. Cognitive radio concept has emerged to significantly tackle the spectrum under-utilization or scarcity problem. Heterogeneous network model is another alternative to relax the number of covered users. To this ex…
Long Range (LoRa) network is emerging as one of the most promising Low Power Wide Area (LPWA) networks, since it enables the energy-constraint devices distributed over wide areas to establish affordable connectivity. However, how to implement a cost-effective and flexible LoRa network is still an open challenge. This paper aims at exposing a feasible solution of design and implementation, allowing users to conveniently build a private LoRa network for various IoT applications. Firstly, several typical application scenarios of LoRa network are discussed. Then, the LoRa system architecture is pr…
Large-scale deployments of massive Machine Type Communications (mMTC) involve several challenges on cellular networks. To address the challenges of mMTC, or more generally, Internet of Things (IoT), the 3rd Generation Partnership Project has developed NarrowBand IoT (NB-IoT) as part of Release 13. NB-IoT is designed to provide better indoor coverage, support of a massive number of low-throughput devices, with relaxed delay requirements, and lower-energy consumption. NB-IoT reuses Long Term Evolution functionality with simplifications and optimizations. Particularly for small data transmissions…
To meet the surging demand of increasing mobile Internet traffic from diverse applications while maintaining moderate energy cost, the radio access network (RAN) of cellular systems needs to take a green path into the future, and the key lies in providing elastic service to dynamic traffic demands. To achieve this, it is time to rethink RAN architectures and expect breakthroughs. In this article, we review the state-of-art literature which aims to renovate RANs from the perspectives of control-traffic decoupled air interface, cloud-based RANs, and software-defined RANs. We then propose a softw…
Wireless cellular networks evolve towards a heterogeneous infrastructure, featuring multiple types of Base Stations (BSs), such as Femto BSs (FBSs) and Macro BSs (MBSs). A wireless device observes multiple points (BSs) through which it can access the infrastructure and it may choose to receive the downlink (DL) traffic from one BS and send uplink (UL) traffic through another BS. Such a situation is referred to as decoupled DL/UL access. Using the framework of stochastic geometry, we derive the association probability for DL/UL. In order to maximize the average received power, as the relative d…
We investigate the activity detection and channel estimation issues for cell-free Internet of Things (IoT) networks with massive random access. In each time slot, only partial devices are active and communicate with neighboring access points (APs) using non-orthogonal random pilot sequences. Different from the centralized processing in cellular networks, the activity detection and channel estimation in cell-free IoT is more challenging due to the distributed and user-centric architecture. We propose a two-stage approach to detect the random activities of devices and estimate their channel stat…
As an important part of the Internet-of-Things (IoT), machine-to-machine (M2M) communications have attracted great attention. In this paper, we introduce mobile edge computing (MEC) into virtualized cellular networks with M2M communications, to decrease the energy consumption and optimize the computing resource allocation as well as improve computing capability. Moreover, based on different functions and quality of service (QoS) requirements, the physical network can be virtualized into several virtual networks, and then each MTCD selects the corresponding virtual network to access. Meanwhile,…
With the remarkable growth of the Internet and communication technologies over the past few decades, Internet of Things (IoTs) is enabling the ubiquitous connectivity of heterogeneous physical devices with software, sensors, and actuators. IoT networks are naturally two-layer with the cloud and cellular networks coexisting with the underlaid device-to-device (D2D) communications. The connectivity of IoTs plays an important role in information dissemination for mission-critical and civilian applications. However, IoT communication networks are vulnerable to cyber attacks including the denial-of…
In this paper, we deliver a discussion regarding the role of Low-Power Wide-Area Networks (LPWAN) in the cellular Internet-of-Things (IoT) infrastructure to support massive Machine-Type Communications (mMTC) in next-generation wireless systems beyond 5G. We commence by presenting a performance analysis of current LPWAN systems, specifically LoRaWAN, in terms of coverage and throughput. The results obtained using analytic methods and network simulations are combined in the paper for getting a more comprehensive vision. Next, we identify possible performance bottlenecks, speculate on the charact…
