An extended version of the resolvent formulation is used to evaluate the use of anisotropic porous materials as passive flow control devices for turbulent channel flow. The effect of these porous substrates is introduced into the governing equations via a generalized version of Darcy's law. Model predictions show that materials with high streamwise permeability and low wall-normal permeability ($ϕ_{xy} = k_{xx}/k_{yy}\gg1$) can suppress resolvent modes resembling the energetic near-wall cycle. Based on these predictions, two anisotropic porous substrates with $ϕ_{xy} > 1$ and $ϕ_{xy} < 1$ were designed and fabricated for experiments in a benchtop water channel experiment. Particle Image Velocimetry (PIV) measurements were used to compute mean turbulence statistics and to educe coherent structure via snapshot Proper Orthogonal Decomposition (POD). Friction velocity estimates based on the Reynolds shear stress profiles do not show evidence of discernible friction reduction (or increase) over the streamwise-preferential substrate with $ϕ_{xy}>1$ relative to a smooth wall flow at identical bulk Reynolds number. A significant increase in friction is observed over the substrate with $ϕ_{xy} < 1$. This increase in friction is linked to the emergence of spanwise rollers resembling Kelvin-Helmholtz vortices. Coherent structures extracted via POD analysis show qualitative agreement with model predictions.
Recent simulations indicate that streamwise-preferential porous materials have the potential to reduce drag in wall-bounded turbulent flows(Gomez-de-Segura & Garcia-Mayoral 2019). This paper extends the resolvent formulation to study the effect of such anisotropic permeable substrates on turbulent channel flow. Under the resolvent formulation, the Fourier-transformed Navier-Stokes equations are interpreted as a linear forcing-response system. The nonlinear terms are considered the endogenous forcing in the system that gives rise to a velocity and pressure response. A gain-based decomposition o…
The performances of an original passive control system based on a biomimetic approach are assessed by investigating the flow over a bluff-body. This control device consists in a couple of flaps made from the combination of a rigid plastic skeleton coated with a porous fabric mimicking the shaft and the vane of the bird's feathers, respectively. The sides of a square cylinder have been fitted with this system so as to enable the flaps to freely rotate around their leading edge. This feature allows the movable flaps to self-adapt to the flow conditions. Comparing both the uncontrolled and the co…
We study transport of a weakly diffusive pollutant (a passive scalar) by thermoconvective flow in a fluid-saturated horizontal porous layer heated from below under frozen parametric disorder. In the presence of disorder (random frozen inhomogeneities of the heating or of macroscopic properties of the porous matrix), spatially localized flow patterns appear below the convective instability threshold of the system without disorder. Thermoconvective flows crucially effect the transport of a pollutant along the layer, especially when its molecular diffusion is weak. The effective (or eddy) diffusi…
Many key environmental, industrial, and energy processes rely on controlling fluid transport within subsurface porous media. These media are typically structurally heterogeneous, often with vertically-layered strata of distinct permeabilities -- leading to uneven partitioning of flow across strata, which can be undesirable. Here, using direct in situ visualization, we demonstrate that polymer additives can homogenize this flow by inducing a purely-elastic flow instability that generates random spatiotemporal fluctuations and excess flow resistance in individual strata. In particular, we find t…
We consider sedimented at a solid wall particles that are immersed in water containing small additives of photosensitive ionic surfactants. It is shown that illumination with an appropriate wavelength, a beam intensity profile, shape and size could lead to a variety of dynamic, both unsteady and steady-state, configurations of particles. These dynamic, well-controlled and switchable particle patterns at the wall are due to an emerging diffusio-osmotic flow that takes its origin in the adjacent to the wall electrostatic diffuse layer, where the concentration gradients of surfactant are induced …
In Nature, liquids often circulate in channels textured with leaflets, cilia or porous walls that deform with the flow. These soft structures are optimized to passively control flows and inspire the design of novel microfluidic and soft robotic devices. Yet so far the relationship between the geometry of the soft structures and the properties of the flow remains poorly understood. Here, taking inspiration from the lymphatic system, we devise millimetric scale fluidic channels with asymmetric soft leaflets that passively increase (reduce) the channel resistance for forward (backward) flows. Com…
Adjoint-based sensitivity analysis is routinely used today to assess efficiently the effect of open-loop control on the linear stability properties of unstable flows. Sensitivity maps identify regions where small-amplitude control is the most effective, i.e. yields the largest first-order (linear) eigenvalue variation. In this study an adjoint method is proposed for computing a second-order (quadratic) sensitivity operator, and applied to the flow past a circular cylinder, controlled with a steady body force or a passive device model. Maps of second-order eigenvalue variations are obtained, wi…
