We design, fabricate, and characterize multifunctional and compact diffractive microlenses with sub-wavelength thickness and the capability to simultaneously focus visible and near-infrared spectral bands at two different focal positions with 24% and 15% measured focusing efficiency, respectively. Our technology utilizes high-index and low-loss sputtered hydrogenated amorphous Si, enabling a sub-wavelength thickness of only 235nm. Moreover, the proposed flat lens concept is polarization insensitive and can be readily designed to operate across any desired wavelength regime. Imaging under broadband illumination with independent focal planes for two targeted spectral bands is experimentally demonstrated, enabling the encoding of the depth information of a sample into different spectral images. In addition, with a small footprint of only 100$μ$m and a minimum feature size of 400nm, the proposed multifunctional and compact diffractive microlenses can be readily integrated with vertical detector arrays to simultaneously concentrate and spectrally select electromagnetic radiation. This provides novel opportunities for spectroscopic and multispectral imaging systems with advanced detector architectures.
We propose an efficient inverse design approach for multifunctional optical elements based on adaptive deep diffractive neural networks (a-D$^2$NNs). Specifically, we introduce a-D$^2$NNs and design two-layer diffractive devices that can selectively focus incident radiation over two well-separated spectral bands at desired distances. We investigate focusing efficiencies at two wavelengths and achieve targeted spectral lineshapes and spatial point-spread functions (PSFs) with optimal focusing efficiency. In particular, we demonstrate control of the spectral bandwidths at separate focal position…
Over the recent years, there have been many reports of achromatic metalenses and diffractive lenses. However, very few (if any) practical applications of such achromatic flat lenses have been demonstrated, which raises questions about the potential of these lenses to provide solutions for real world cases which involve broadband illumination. A recent paper placed limits on the performance of achromatic metalenses. However, is this limit also valid for a diffractive lens? Not necessarily so. In this paper we derive the limits on the performance of achromatic diffractive lenses. In particular, …
Recently, there has been an explosion of interest in metalenses for imaging. The interest is primarily based on their sub-wavelength thicknesses. Diffractive lenses have been used as thin lenses since the late 19th century. Here, we show that multi-level diffractive lenses (MDLs), when designed properly can exceed the performance of metalenses. Furthermore, MDLs can be designed and fabricated with larger constituent features, making them accessible to low-cost, large area volume manufacturing, which is generally challenging for metalenses. The support substrate will dominate overall thickness …
We propose the inverse design of ultracompact, broadband focusing spectrometers based on adaptive deep diffractive neural networks (a-D$^2$NNs). Specifically, we introduce and characterize two-layer diffractive devices with engineered angular dispersion that focus and steer broadband incident radiation along predefined focal trajectories with desired bandwidth and $5$ nm spectral resolution. Moreover, we systematically study the focusing efficiency of two-layer devices with side length $L=100~μ\mathrm{m}$ and focal length $f=300~\,μ\mathrm{m}$ across the visible spectrum and we demonstrate acc…
This paper presents a general approach to designing the isotropic spherical media with complex spatial structure that provide different types of imaging for different light rays. It is based on equivalence of the spherical medium and the corresponding geodesic lens. We use this approach to design multi-focal gradient- index lenses embedded into an optically homogeneous region and multi-focal absolute instruments that provide perfect imaging of three-dimensional domains.
In this paper, we shall provide an analytical solution describing a Frozen Wave beam after passing through a pair of convex lenses with different focal distances.
We demonstrate cloaking with four lenses of different focal lengths. To achieve this, we compute the separation distances between lenses such that the effective ABCD matrix is equal to just a propagation in free space. Previously, calculations using this method are restricted to 2 pairs of lenses with equal focal lengths. Our computations, on the other hand, had no such restrictions: we generalize even with an asymmetric case. We derive expressions that show the dependence of the distances on the lenses and their focal lengths. Furthermore, we propose a way to minimize the length of this cloak…
We designed and fabricated a flat multi-level diffractive lens (MDL) that is achromatic in the SWIR band (875nm to 1675nm). The MDL had a focal length of 25mm, aperture diameter of 8.93mm and thickness of only 2.6um. By pairing the MDL with a SWIR image sensor, we also characterized its imaging performance in terms of the point-spread functions, modulation-transfer functions, and still and video imaging.
In this work, we measure and model tilted x-ray refractive lenses to investigate their effects on an x-ray beam. The modelling is benchmarked against at-wavelength metrology obtained with x-ray speckle vector tracking experiments (XSVT) at the BM05 beamline at the ESRF-EBS light source, showing very good agreement. This validation permits us to explore possible applications of tilted x-ray lenses in optical design: we demonstrate that tilting 1D lenses around their focusing direction can be used for fine-tuning their focal length with possible applications in beamline optical design.
Recent theoretical work suggested upper bounds on the operating bandwidths of flat lenses. Here, we show how these bounds can be circumvented via a multi-level diffractive lens (MDL) of diameter = 100 mm, focal length = 200 mm, device thickness = 2.4μ m and operating bandwidth from ? = 400 nm to 800 nm. We further combine the MDL with a refractive lens to demonstrate a hybrid telescope. By appealing to coherence theory, we show that the upper bound on relative bandwidth is surprisingly independent of lens diameter or numerical aperture, but is only limited by the bandwidth of the image sensor.…
Compressive spectral imaging enables to reconstruct the entire three-dimensional (3D) spectral cube from a few multiplexed images. Here, we develop a novel compressive spectral imaging technique using diffractive lenses. Our technique uses a coded aperture to spatially modulate the optical field from the scene and a diffractive lens such as a photon-sieve for dispersion. The coded field is passed through the diffractive lens and then measured at a few planes using a monochrome detector. The 3D spectral cube is then reconstructed from these highly compressed measurements through sparse recovery…
We demonstrate imaging over the visible band using a single planar diffractive lens. This is enabled via multi-level diffractive optics that is designed to focus over a broad wavelength range, which we refer to as an achromatic diffractive lens (ADL). We designed, fabricated and characterized two ADLs with numerical apertures of 0.05 and 0.18. Diffraction-limited focusing is demonstrated for the NA=0.05 lens with measured focusing efficiency of over 40% across the entire visible spectrum (450nm to 750nm). We characterized the lenses with a monochromatic and a color CMOS sensor, and demonstrate…
We propose a method for designing multifocal diffractive lenses generating prescribed sets of foci with fixed positions at several different wavelengths. The method is based on minimizing the difference between the complex amplitudes of the beams generated by the lens microrelief at the design wavelengths, and the functions of complex transmission of multifocal lenses calculated for these wavelengths. As an example, a zone plate generating three fixed foci at three different wavelengths was designed, fabricated and experimentally investigated. The proof-of-concept experimental results confirm …
Flat lenses enable thinner, lighter, and simpler imaging systems. However, large-area and high-NA flat lenses have been elusive due to computational and fabrication challenges. Here, we applied inverse design to create a multi-level diffractive lens (MDL) with thickness <1.35μm, diameter of 4.13mm, NA=0.9 at wavelength of 850nm. Since the MDL is created in polymer, it can be cost-effectively replicated via imprint lithography.
The optical matrix formalism is applied to find parameters such as focal distance, back and front focal points, principal planes, and the equation relating object and image distances for a thick spherical lens immerse in air. Then, the formalism is applied to systems compound of two, three and N thick lenses in cascade. It is found that a simple Gaussian equation is enough to relate object and image distances no matter the number of lenses.
In the absence of separate apertures, the size and focal length of a lens determines both its resolution and light-collection ability defined by numerical-aperture (NA) and f/#, respectively. We utilize free-form broadband-diffractive-optical elements (BDOEs) to create flat lenses that decouple NA from f#, whereby the resolution of the lens may be chosen independently from its light-collection ability. Specifically, we designed, fabricated and characterized three BDOE lenses operating in the visible band (450nm-750nm), each with f/11.25, but with NAs of 0.00075, 0.0067 and 0.054, respectively.…
Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we demonstrate the numerical design and experimental demonstration of high-numerical aperture (NA) (${\sim}0.99$), diffraction-limited achromatic multilevel diffractive lens (AMDL) operating in microwave range $10 GHz$ - $14 GHz$. A multi-objective differential evolution (MO-DE) algorithm is incorporated with the three-dimensional finite-difference time-domain (3D FDTD) …
We used an atom interferometer for atom optical shop testing of lenses for atomic de Broglie waves. We measured focal lengths and spherical aberrations of electrostatic lenses in three independent ways based on contrast data, phase data, or calculations of de Broglie wavefront curvature. We report focal lengths of -2.5 km and -21.7 km with 5% uncertainty for different lenses. All three methods give consistent results. Understanding how lenses magnify and distort atom interference fringes helps improve atom beam velocity measurements made with phase choppers [New J. Phys. 13, 115007 (2011)], wh…
Metasurface-based lenses (metalenses) offer specific conceptual advantages compared to ordinary refractive lenses. For example, it is possible to tune the focal length of a metalens doublet by varying the relative angle between the two metalenses while fixing their distance, leading to an extremely compact zoom lens. An improved polarization-insensitive design based on silicon-nanocylinders on silica substrates is presented. This design is realized and characterized experimentally at 1550 nm wavelength. By varying the relative angle between the metalenses in steps of 10 degrees, tuning of the …
Thick diffractive optical elements offer a promising way to achieve focusing or imaging at a resolution approaching 1 nm for X-ray wavelengths shorter than about 0.1 nm. Efficient focusing requires that these are fabricated with structures that vary in period and orientation so that rays obey Bragg's law over the entire lens aperture and give rise to constructive interference at the focus. Here the analysis method of ray-tracing of thick diffractive optical elements is applied to such lenses to optimise their designs and to investigate their operating and manufacturing tolerances. Expressions …
Two transformation-optics inspired flat lenses are used to build up an optical system capable to transpose an area surrounding the object focal point in a magnified area surrounding the image focal point. The object and image focal points of the system are placed in the free space and respectively a dilated space having a sub-unitary relative permittivity and permeability. The anisotropic and inhomogeneous media constituting the lenses enable the processing of the high spatial frequencies waves without converting them in evanescent waves. Numerical simulations show the capability of the propos…
Normally, the focal length of a conventional lens is fixed. Scientists have made much effort in modulating it into bifocal, which is very important for virtual reality (VR) and argument reality (AR) 3D display. It is even much more difficult for a lens to realize both convex and concave functions with one geometric structure, that is, a concave/convex switchable lens, which can tune 3D real-images and virtual-images in AR and VR, corresponding to long depth of view in 3D display. Based on the tunable refractive indexes of phase-change materials, here we propose a series of concave/convex switc…
Multilevel diffractive lenses (MDLs) have emerged as an alternative to both conventional diffractive optical elements (DOEs) and metalenses for applications ranging from imaging to holographic and immersive displays. Recent work has shown that by harnessing structural parametric optimization of DOEs, one can design MDLs to enable multiple functionalities like achromaticity, depth of focus, wide-angle imaging, etc. with great ease in fabrication. Therefore, it becomes critical to understand how fabrication errors still do affect the performance of MDLs and numerically evaluate the trade-off bet…
In this contribution, we investigate the effects of using in-plane polarized piezo actuators with topological buckling displacement to drive glass-piezo composite membranes for adaptive lenses with aspherical control. We find that the effects on the focal power and aspherical tuning range are relatively small, whereas the tuning speed is improved significantly with a first resonance of 1 kHz for a 13 mm aperture lens.
We propose and demonstrate a single channel interferometer that can be used to study how vortex beams propagate. The interferometer consists of a multifunctional diffractive optical element (MDOE) synthesized by the spatial random multiplexing of a Fresnel zone plate and a spiral Fresnel zone plate with different focal lengths. The MDOE generates two co-propagating beams, such that only the beam carrying orbital angular momentum is modulated by an annular stack of thin scatterers located at the focal plane of the Fresnel zone plate, while the other beam passes through the centre of the annulus…
We report subwavelength-thick, polarization insensitive micro-lenses operating at telecom wavelength with focal spots as small as 0.57 wavelengths and measured focusing efficiency up to 82%. The lens design is based on high contrast transmitarrays that enable control of optical phase fronts with subwavelength spatial resolution. A rigorous method for ultra-thin lens design, and the trade-off between high efficiency and small spot size (or large numerical aperture) are discussed. The transmitarrays, composed of silicon nano-posts on glass, could be fabricated by high-throughput photo or nanoimp…
We demonstrate new axisymmetric inverse-design techniques that can solve problems radically different from traditional lenses, including \emph{reconfigurable} lenses (that shift a multi-frequency focal spot in response to refractive-index changes) and {\emph{widely separated}} multi-wavelength lenses ($λ= 1\,μ$m and $10\,μ$m). We also present experimental validation for an axisymmetric inverse-designed monochrome lens in the near-infrared fabricated via two-photon polymerization. Axisymmetry allows fullwave Maxwell solvers to be scaled up to structures hundreds or even thousands of wavelengths…
We design plano-concave silicon lenses with coupled gradient-index plasmonic metacoatings for ultrawide apertured focusing utilizing a reduced region of $\sim 20 λ^2$. The anomalous refraction induced in the planar input side of the lens and in the boundary of the wavelength-scale focal region boosts the curvature of the emerging wavefront, thus significantly enhancing the resolution of the tightly-focused optical wave. The formation of a light tongue with dimensions approaching those of the concave opening is here evidenced. This scheme is expected to have potential applications in optical tr…
We describe the formation, characterization and theoretical understanding of microlenses comprised of alternating polystyrene and polymethylmethacrylate layers produced by multilayer coextrusion. These lenses are fabricated by photolithography, using a grayscale mask followed by plasma etching, so that the refractive index alternation of the bilayer stack appears across the radius of the microlens. The alternating quarter-wave thick layers form a one-dimensional photonic crystal whose dispersion augments the material dispersion, allowing one to sculpt the chromatic dispersion of the lens by ad…
We experimentally demonstrate imaging in the longwave-infrared (LWIR) spectral band (8um to 12um) using a single polymer flat lens based upon multi-level diffractive optics. The device thickness is only 10μm, and chromatic aberrations are corrected over the entire LWIR band with one surface. Due to the drastic reduction in device thickness, we are able to utilize polymers with absorption in the LWIR, allowing for inexpensive manufacturing via imprint lithography. The weight of our lens is less than 100 times those of comparable refractive lenses. We fabricated and characterized two different f…
Varifocal lenses are essential components of dynamic optical systems with applications in photography, mixed reality, and microscopy. Metasurface optics has strong potential for creating tunable flat optics. Existing tunable metalenses, however, typically require microelectromechanical actuators, which cannot be scaled to large area devices, or rely on high voltages to stretch a flexible substrate and achieve a sufficient tuning range. Here, we build a 1 cm aperture varifocal metalens system at 1550 nm wavelength inspired by an Alvarez lens, fabricated using high-throughput stepper photolithog…
In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequency. It is proposed that such an artificial "reverse" chromatic aberration may optimize the transverse resolution of millimeter wave diagnostics of plasmas and be useful in compensating for the natur…
It is generally assumed that correcting chromatic aberrations in imaging requires optical elements. Here, we show that by allowing the phase in the image plane to be a free parameter, it is possible to correct chromatic variation of focal length over an extremely large bandwidth, from the visible (Vis) to the longwave infrared (LWIR) wavelengths using a single diffractive surface, i.e., a flat lens. Specifically, we designed, fabricated and characterized a flat, multi-level diffractive lens (MDL) with thickness £ 10μm, diameter ~1mm, and focal length = 18mm, which was constant over the operati…
Focusing control of ultrashort pulsed beams is an important research topic, due to its impact to subsequent interaction with matter. In this work, we study the propagation near the focus of ultrashort laser pulses of ~25 fs duration under diffractive focusing. We perform the spatio-spectral and spatio-temporal measurements of their amplitude and phase, complemented by the corresponding simulations. With them, we demonstrate that pulse shaping allows modifying in a controlled way not only the spatio-temporal distribution of the light irradiance in the focal region, but also the way it propagate…
Cassegrain designs can be used to build thin lenses. We analyze the relationships between system thickness and aperture sizes of the two mirrors as well as FoV size. Our analysis shows that decrease in lens thickness imposes tight constraint on the aperture and FoV size. To mitigate this limitation, we propose to fill the gaps between the primary and the secondary with high index material. The Gassegrain optics cuts the track length into half and high index material reduces ray angle and height, consequently the incident ray angle can be increased, i.e., the FoV angle is extended. Defining tel…
In this letter, we experimentally report an achromatic metalens (AML) operating over a continuous bandwidth in the visible. This is accomplished via dispersion engineering of dielectric phase shifters: titanium dioxide nanopillars tiled on a dielectric spacer layer above a metallic mirror. The AML works in reflection mode with a focal length independent of wavelength from wavelength of 490 nm to 550 nm. We also design a metalens with reverse chromatic dispersion, where the focal length increases as the wavelength increases, contrary to conventional diffractive lenses. The ability to engineer t…
We present a new family of diffractive lenses whose structure is based on the combination of two concepts: photon sieve and fractal zone plates with variable lacunarity. The focusing properties of different members of this family are examined. It is shown that the sieves provide a smoothing effect on the higher order foci of a conventional lacunar fractal zone plate. However, the characteristic self-similar axial response of the fractal zone plates is always preserved.
Chromatic aberration in optical systems arises from the wavelength dependence of a glass's refractive index. Polychromatic rays incident upon an optical surface are refracted at slightly different angles and in traversing an optical system follow distinct paths creating images displaced according to color. Although arising from dispersion, it manifests as a spatial distortion correctable only with compound lenses with multiple glasses and accumulates in complicated imaging systems. While chromatic aberration is measured with interferometry, simple methods are attractive for their ease of use a…
