ILC冷冻机的升级
Upgrade of the ILC cryomodule
摘要:
总结了国际直线对撞机(ILC)低温模块改进组件的测试结果。为了降低ILC项目成本,建议用不锈钢(SS)替代钛低温组件。在爆炸焊接的基础上,采用独特的方法制备了Ti_SS、Nb_SS等新型相变材料.这些组件的连续升级到最新版本的Nb/Ti/SS过渡元素导致ILC低温制冷机的改进。这种新部件解决了残余应力问题,其特殊设计防止了由于组成金属的线性膨胀系数不同而产生位移的可能性。He气体泄漏试验显示,在0.2x10-10atmxcc-1 s的背景速率下没有泄漏。测试结果非常令人鼓舞。Nb_Ti_SS三金属元件的最新设计保证了工艺上的简单和成本上的降低。研究表明,爆炸焊接不仅可以为加速器的低温装置制造独特的三金属部件,而且还可以用于实验室设备和一般工程应用。
英文摘要:
Results of testing modified components for the cryomodule of the International Linear Collider (ILC) are summarized. To reduce the ILC project cost, it is proposed to replace titanium cryomodule components with stainless steel (SS) ones. New bimetallic transitions Ti_SS, Nb_SS have been produced by a unique method based on explosion welding. Successive upgrading of these components to the latest version of the Nb/Ti/SS transition element has led to improvement of the ILC cryomodule. This new component resolves problems of residual stress, and its specific design prevents the possibility of a shift due to the difference in the linear expansion coefficients of the constituent metals. Leak tests with the He gas revealed no leaks at the background rate of 0.2x10-10atmxcc-1s. The test results are very encouraging. The up-to-date design of trimetallic Nb_Ti_SS element promises technologically simpler and less expensive manufacture. Investigations have shown that explosion welding allows unique trimetallic components to be made not only for cryogenic units of accelerators but also for laboratory equipment and for general engineering applications.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。