The thermal transport properties of porous silicon and nano-hybrid "porous silicon/water" systems are presented here. The thermal conductivity was evaluated with equilibrium molecular dynamics technique for porous systems made of spherical voids or water-filled cavities. We revealed large thermal conductivity enhancement in the nano-hybrid systems as compared to their dry porous counterparts, which cannot be captured by effective media theory. This rise of thermal conductivity is related to the increases of the specific surface of the liquid/solid interface. We demonstrated that significant difference for more than two folds of thermal conductivity of pristine porous silicon and "porous silicon liquid/composite" is due to the liquid density fluctuation close to "solid/liquid interface" (layering effect). This effect is getting more important for the high specific surface of the interfacial area. Specifically, the enhancement of the effective thermal conductivity is 50 % for specific surface area of 0.3 (1/nm), and it increases further upon the increase of the surface to volume ratio. Our study provides valuable insights into the thermal properties of hybrid liquid/solid nanocomposites and about the importance of confined liquids within nanoporous materials.
In this study, we use the transient thermal grating optical technique \textemdash a non-contact, laser-based thermal metrology technique with intrinsically high accuracy \textemdash to investigate room-temperature phonon-mediated thermal transport in two nanoporous holey silicon membranes with limiting dimensions of 100 nm and 250 nm respectively. We compare the experimental results to ab initio calculations of phonon-mediated thermal transport according to the phonon Boltzmann transport equation (BTE) using two different computational techniques. We find that the calculations conducted within…
Nanoporosity in silicon leads to completely new functionalities of this mainstream semiconductor. A difficult to assess mechanics has however significantly limited its application in fields ranging from nanofluidics and biosensorics to drug delivery, energy storage and photonics. Here, we present a study on laser-excited elastic guided waves detected contactless and non-destructively in dry and liquid-infused single-crystalline porous silicon. These experiments reveal that the self-organised formation of 100 billions of parallel nanopores per square centimetre cross section results in a nearly…
Introducing hierarchical disorder from multiple defects into materials through nanostructuring is one of the most promising directions to achieve extremely low thermal conductivities and thus improve thermoelectric performance. The success of nanostructuring relies on charge carriers having shorter mean-free-paths than phonons so that the latter can be selectively scattered. Nevertheless, introducing disorder into a material often comes at the expense of scattering charge carriers as well as phonons. In order to determine the tradeoff between the degradation of the lattice thermal conductivity…
Silicon carbide nanoparticles with diameters around 8 nm and with narrow size distribution have been finely mixed with doped silicon nanopowders and sintered into bulk samples to investigate the influence of nanoinclusions on electrical and thermal transport properties. We have compared the thermoelectric properties of samples ranging from 0-5% volume fraction of silicon carbide. The silicon carbide nanoinclusions lead to a significant improvement in the thermoelectric figure of merit, ZT, largely due to an enhancement of the Seebeck coefficient. A semiclassical Boltzmann transport equation is…
The absence of piezoelectricity in silicon makes direct electro-mechanical applications of this mainstream semiconductor impossible. Integrated electrical control of the silicon mechanics, however, would open up new perspectives for on-chip actuorics. Here, we combine wafer-scale nanoporosity in single-crystalline silicon with polymerization of an artificial muscle material inside pore space to synthesize a composite that shows macroscopic electrostrain in aqueous electrolyte. The voltage-strain coupling is 3 orders of magnitude larger than the best-performing ceramics in terms of piezoelectri…
Nanoporosity in silicon results in an interface-dominated mechanics, fluidics and photonics that are often superior to the ones of the bulk material. However, their active control, e.g. as a response to electronic stimuli, is challenging due to the absence of intrinsic piezoelectricity in the base material. Here, for large-scale nanoporous silicon cantilevers wetted by aqueous electrolytes, we show electrosorption-induced mechanical stress generation of up to 600 kPa that is reversible and adjustable at will by electrical potential variations of approximately 1 V. Laser cantilever bending expe…
Here we describe an optical method to determine the dynamics of optically excited carriers in nanostructured composite samples. By combining pump-probe time-resolved reflectivity with scattering measurements, we extract the characteristic times for charge carrier evolution. We use the 3D Maxwell-Garnett formulae, modified to include the Drude optical response, to model the results. The method, applied to hydrogenated amorphous silicon containing crystalline silicon nanoparticles, showed that the recombination times in the nanocrystals and in the matrix were ~4.9 ps and ~22 ps, respectively. Th…
Macroscopic strain experiments revealed that Si crystals traversed by parallel, channel-like nanopores functionalized with the muscle polymer polypyrrole exhibit large and reversible electrochemo-mechanical actuation in aqueous electrolytes. On the microscopical level this system still bears open questions, as to how the electrochemical expansion and contraction of PPy acts on to np-Si pore walls and how the collective motorics of the pore array emerges from the single-nanopore behavior. An analysis of in operando X-ray diffraction experiments with micromechanical finite element simulations, b…
Polymers are usually considered as thermal insulators and their applications are limited by their low thermal conductivity. However, recent studies showed that certain polymers have surprisingly high thermal conductivity, some of which are comparable to that in poor metals or even silicon. In this review, we outline the experimental achievements and theoretical progress of thermal transport in polymers and their nanocomposites. The open questions and challenges of existing theories are discussed. Special attention is given to the mechanism of thermal transport, the enhancement of thermal condu…
Nanoporous materials are of broad interest for various applications, in particular advanced thermoelectric materials. The introduction of nanoscale porosity, even at modest levels, has been known to drastically reduce a materials thermal conductivity, in some cases even below its amorphous limit, thereby significantly increasing its thermoelectric figure of merit, ZT. The details of the important attributes that drive these large reductions, however, are not yet clear. In this work, we employ large-scale equilibrium molecular dynamics to perform an exhaustive atomistic-scale investigation of t…
We report filling-fraction dependent dielectric spectroscopy measurements on the relaxation dynamics of the rod-like nematogen 7CB condensed in 13 nm silica nanochannels. In the film-condensed regime, a slow interface relaxation dominates the dielectric spectra, whereas from the capillary-condensed state up to complete filling an additional, fast relaxation in the core of the channels is found. The temperature-dependence of the static capacitance, representative of the averaged, collective molecular orientational ordering, indicates a continuous, paranematic-to-nematic (P-N) transition, in con…
Liquid adsorption in nanoporous materials induces their deformation due to strong capillary forces. The linear relationship between the liquid pressure and the solid strain (pore-load modulus) provides an experimental technique to determine the mechanical properties of nanosized solids. Puzzling experimental results have often been reported, leading to a severe reconsideration of the mechanical properties of the thin walls, the introduction of surface stresses, and the suggestion of a mutual influence of fluid adsorption and matrix deformation. This work presents a molecular simulation examina…
Spatial confinement in nanoporous media affects the structure, thermodynamics and mobility of molecular soft matter often markedly. This article reviews thermodynamic equilibrium phenomena, such as physisorption, capillary condensation, crystallisation, self-diffusion, and structural phase transitions as well as selected aspects of the emerging field of spatially confined, non-equilibrium physics, i.e. the rheology of liquids, capillarity-driven flow phenomena, and imbibition front broadening in nanoporous materials. The observations in the nanoscale systems are related to the corresponding bu…
Hierarchical material nanostructuring is considered to be a very promising direction for high performance thermoelectric materials. In this work we investigate thermal transport in hierarchically nanostructured silicon. We consider the combined presence of nanocrystallinity and nanopores, arranged under both ordered and randomized positions and sizes, by solving the Boltzmann transport equation using the Monte Carlo method. We show that nanocrystalline boundaries degrade the thermal conductivity more drastically when the average grain size becomes smaller than the average phonon mean free path…
The effect on the vibrational and thermal properties of gradually interconnected nanoinclusions embedded in an amorphous silicon matrix is studied using MD simulations. The nanoinclusion arrangement ranges from an aligned sphere array to an interconnected mesh of nanowires. Wave-packet simulations scanning different polarizations and frequencies reveal that the interconnection of the nanoinclusions at constant volume fraction induces a strong increase of the mean free path of high frequency phonons, but does not affect the energy diffusivity. The mean free path and energy diffusivity are then …
Achieving low thermal conductivity and good electrical properties is a crucial condition for thermal energy harvesting materials. Nanostructuring offers a very powerful tool to address both requirements: in nanostructured materials, boundaries preferentially scatter phonons compared to electrons. The search for low-thermal-conductivity nanostructures is typically limited to materials with simple crystal structures, such as silicon, because of the complexity arising from modeling branch- and wave vector- dependent nanoscale heat transport. Using the phonon mean-free-path (MFP) dependent Boltzma…
The 3$ω$ method is a dynamic measurement technique developed for determining the thermal conductivity of thin films or semi-infinite bulk materials. A simplified model is often applied to deduce the thermal conductivity from the slope of the real part of the ac temperature amplitude as a function of the logarithm of frequency, which in-turn brings a limitation on the kind of samples under observation. In this work, we have measured the thermal conductivity of a forest of nanowires embedded in nanoporous alumina membranes using the 3$ω$ method. An analytical solution of 2D heat conduction is th…
