We theoretically study the tunnel magnetoresistance (TMR) effect in (111)-oriented junctions Co/MgO/Co(111) and Ni/MgO/Ni(111). The Co-based junction is shown to have a TMR ratio over 2000$\%$, which is one order higher than that of the Ni-based one. The high TMR ratio is attributed to the interfacial resonance effect: The interfacial $d$-$p$ antibonding states are formed close to the Fermi level in the majority-spin channel and these states in both interfaces resonate with each other. This differs essentially from the conventional coherent tunneling mechanism of high TMR ratios in Fe(Co)/MgO/Fe(Co)(001).
The effects of the spin-orbit interaction on the tunneling magnetoresistance of ferromagnet/semiconductor/normal metal tunnel junctions are investigated. Analytical expressions for the tunneling anisotropic magnetoresistance (TAMR) are derived within an approximation in which the dependence of the magnetoresistance on the magnetization orientation in the ferromagnet originates from the interference between Bychkov-Rashba and Dresselhaus spin-orbit couplings that appear at junction interfaces and in the tunneling region. We also investigate the transport properties of ferromagnet/semiconductor/…
Inverse magnetoresistance has been observed in magnetic tunnel junctions with pinhole nanocontacts over a broad temperature range. The tunnel magnetoresistance undergoes a change of sign at higher bias and temperature. This phenomenon is attributed to the competition between the spin conserved ballistic transport through the pinhole contact where the transmission probability is close to unity and spin polarized tunneling across the insulating spacer with weak transmittivity.
We report the observation of tunneling anisotropic magnetoresistance effect (TAMR) in the epitaxial metal-semiconductor system Fe/GaAs/Au. The observed two-fold anisotropy of the resistance can be switched by reversing the bias voltage, suggesting that the effect originates from the interference of the spin-orbit coupling at the interfaces. Corresponding model calculations reproduce the experimental findings very well.
We investigated spin dependent transport through Fe/GaAs/Fe tunnel junctions. The tunneling magnetoresistance effect (TMR) was probed for different types of Fe/GaAs interfaces. For interfaces cleaned by hydrogen plasma the TMR effect is increased and observable at room temperature. If an epitaxial Fe/GaAs(001) interface is involved, the tunnel junction exhibits a bias dependent inversion of the TMR effect. This is a first experimental signature for band structure effects at a Fe/GaAs interface and relevant for spin injection experiments.
We make a theoretical study of the quantum oscillations of the tunneling magnetoresistance (TMR) as a function of the spacer layer thickness. Such oscillations were recently observed in tunneling junctions with a nonmagnetic metallic spacer at the barrier-electrode interface. It is shown that momentum selection due to the insulating barrier and conduction via quantum well states in the spacer, mediated by diffusive scattering caused by disorder, are essential features required to explain the observed period of oscillation in the TMR ratio and its asymptotic value for thick nonmagnetic spacer.
We study the zero temperature conductance and magnetoconductance of ballistic \textit{p-n} junctions in Weyl semimetals. Electron transport is mediated by Klein tunneling between \textit{n}- and \textit{p}- regions. The chiral anomaly that is realized in Weyl semimetals plays a crucial role in the magnetoconductance of the junction. With the exception of field orientations where the angle between $\mathbf{B}$ and the junction plane is small, magnetoconductance is positive and linear in $B$ at both weak and strong magnetic fields. In contrast, magnetoconductance in conventional \textit{p-n} jun…
We report resistance versus magnetic field measurements for a La0.65Sr0.35MnO3/SrTiO3/La0.65Sr0.35MnO3 tunnel junction grown by molecular-beam epitaxy, that show a large field window of extremely high tunneling magnetoresistance (TMR) at low temperature. Scanning the in-plane applied field orientation through 360^/circ, the TMR shows 4-fold symmetry, i.e. biaxial anisotropy, aligned with the crystalline axes but not the junction geometrical long axis. The TMR reaches ~ 1900% at 4K, corresponding to an interfacial spin polarization of > 95% assuming identical interfaces. These results show that…
We investigate transport through 6 to 10 nm thin epitaxial GaAs(001) barriers sandwiched between polycrystalline iron films. Apart from a pronounced tunneling magnetoresistance effect (TMR) at low magnetic fields we observe a distinct negative magnetoresistance (MR) at low and a positive MR at higher temperatures. We show that the negative MR contribution is only observed for the ferromagnetic iron contacts but is absent if iron is replaced by copper or gold electrodes. Possible explanations of the negative MR involve suppression of spin-flip scattering or Zeeman splitting of the tunneling bar…
We examine the spin torque (ST) response of magnetic tunnel junctions (MTJs) with ultra-thin MgO tunnel barrier layers to investigate the relationship between the spin-transfer torque and the tunnel magnetoresistance (TMR) under finite bias. We find that the spin torque per unit current exerted on the free layer decreases by less than 10% over a bias range where the TMR decreases by over 40%. We examine the implications of this result for various spin-polarized tunneling models and find that it is consistent with magnetic-state-dependent effective tunnel decay lengths.
We have fabricated a spin-polarized tunneling device based on half metallic manganites incorporating $Ba_{2}LaNbO_{6}$ as insulating barrier. An anomalous bias dependence of tunnel magnetoresistance (TMR) has been observed, the first of its kind in a symmetric electrode tunnel junction with single insulating barrier. The bias dependence of TMR shows an extremely sharp zero bias anomaly, which can be considered as a demonstration of the drastic density of states variation around the Fermi level of the half metal. This serves as a strong evidence for the existence of minority spin tunneling stat…
First-principles calculations of electron tunneling transport in Ni and Co break junctions reveal strong dependence of the conductance on the magnetization direction, an effect known as tunneling anisotropic magnetoresistance (TAMR). The origin of this phenomenon stems from resonant states localized in the electrodes near the junction break. The energy and broadening of these states is strongly affected by the magnetization orientation due to spin-orbit coupling, causing TAMR to be sensitive to bias voltage on a scale of a few mV. Our results bear a resemblance to recent experimental data and …
Oscillatory tunneling magnetoresistance (TMR) as a function of spacer thickness is investigated theoretically for a magnetic tunnel junction with a nonmagnetic layer inserted between the tunnel barrier and the ferromagnetic layer. TMR is characterized in an analytical form, that is expressed with the transmission and reflection amplitudes of single interfaces at the Fermi level, and by the extremal wavevectors. Electronic structures with multiple bands are taken into account in the derivation characterizing the TMR, and the proposed analytical expression can be directly applied to real junctio…
The influence of insertion of an ultra-thin NiO layer between the MgO barrier and ferromagnetic electrode in magnetic tunnel junctions has been investigated by measuring the tunneling magnetoresistance and the X-ray magnetic circular dichroism (XMCD). The magnetoresistance shows a high asymmetry with respect to bias voltage, giving rise to a negative value of -16% at 2.8 K. We attribute this to the formation of non-collinear spin structures in the NiO layer as observed by XMCD. The magnetic moments of the interface Ni atoms tilt from the easy axis due to exchange interaction and the tilting an…
Recently, it has been shown that magnetic tunnel junctions with thin MgO tunnel barriers exhibit extraordinarily high tunneling magnetoresistance (TMR) values at room temperature1, 2. However, the physics of spin dependent tunneling through MgO barriers is only beginning to be unravelled. Using planar magnetic tunnel junctions in which ultra-thin layers of magnetic metals are deposited in the middle of a MgO tunnel barrier here we demonstrate that the TMR is strongly modified when these layers are discontinuous and composed of small pancake shaped nanodots. At low temperatures, in the Coulomb …
A systematic, quantitative study of the effect of interface roughness and disorder on the magnetoresistance of FeCo$|$vacuum$|$FeCo magnetic tunnel junctions is presented based upon parameter-free electronic structure calculations. Surface roughness is found to have a very strong effect on the spin-polarized transport while that of disorder in the leads (leads consisting of a substitutional alloy) is weaker but still sufficient to suppress the huge tunneling magneto-resistance (TMR) predicted for ideal systems.
We demonstrate tunnel magnetoresistance (TMR) junctions based on a tri layer system consisting of an epitaxial NiMnSb, aluminum oxide and CoFe tri layer. The junctions show a tunnelling magnetoresistance of Delta R/R of 8.7% at room temperature which increases to 14.7% at 4.2K. The layers show clear separate switching and a small ferromagnetic coupling. A uniaxial in plane anisotropy in the NiMnSb layer leads to different switching characteristics depending on the direction in which the magnetic field is applied, an effect which can be used for sensor applications.
The tunnel magnetoresistance (TMR) in the magnetic tunnel junction (MTJ) with embedded nanoparticles (NPs) was calculated in range of the quantum-ballistic model. The simulation was performed for electron tunneling through the insulating layer with embedded magnetic and nonmagnetic NPs within the approach of the double barrier subsystem connected in parallel to the single barrier one. This model can be applied for both MTJs with in-plane magnetization and perpendicular one. We also calculated the in-plane component of the spin transfer torque (STT) versus the applied voltage in MTJs with magne…
Perpendicular magnetic tunnel junction with MgAl2O4 barrier is investigated. It is found that reactive RF sputtering with O2 is essential to obtain strong perpendicular magnetic anisotropy and large tunneling magnetoresistance in MgAl2O4-based junctions. An interfacial perpendicular magnetic anisotropy energy density of 2.25 mJ/m2 is obtained for the samples annealed at 400C. An enhanced magnetoresistance of 60% has also been achieved. The Vhalf, bias voltage at which tunneling magnetoresistance drops to half of the zero-bias value, is found to be about 1V, which is substantially higher than t…
We report a large, quasi-reversible tunnel magnetoresistance in exchange-biased ferromagnetic semiconductor tunnel junctions wherein a soft ferromagnetic semiconductor (\gma) is exchange coupled to a hard ferromagnetic metal (MnAs). Our observations are consistent with the formation of a region of inhomogeneous magnetization (an "exchange spring") within the biased \gma layer. The distinctive tunneling anisotropic magnetoresistance of \gma produces a pronounced sensitivity of the magnetoresistance to the state of the exchange spring.
Antiferromagnetic (AFM) spintronics has emerged as a subfield of spintronics driven by the advantages of antiferromagnets producing no stray fields and exhibiting ultrafast magnetization dynamics. The efficient method to detect an AFM order parameter, known as the Néel vector, by electric means is critical to realize concepts of AFM spintronics. Here, we demonstrate that non-collinear AFM metals, such as Mn3Sn, exhibit a momentum dependent spin polarization which can be exploited in AFM tunnel junctions to detect the Néel vector. Using first-principles calculations based on density functional …
Two-dimensional (2D) van der Waals (vdW) materials provide the possibility of realizing heterostructures with coveted properties. Here, we report a theoretical investigation of the vdW magnetic tunnel junction (MTJ) based on VSe2/MoS2 heterojunction, where the VSe2 monolayer acts as the ferromagnet with the room-temperature ferromagnetism. We propose the concept of spin-orbit torque (SOT) vdW MTJ with reliable reading and efficient writing operations. The non-equilibrium study reveals a large tunneling magnetoresistance (TMR) of 846 % at 300 Kelvin, identifying significantly its parallel and a…
Alloying Fe electrodes with V, through reduced FeV/MgO interface mismatch in epitaxial magnetic tunnel junctions with MgO barriers, notably suppresses both nonmagnetic (parallel) and magnetic (antiparallel) state 1/f noise and enhances tunnelling magnetoresistance (TMR). A comparative study of the room temperature electron transport and low frequency noise in Fe1-xVx/MgO/Fe and Fe/MgO/Fe1-xVx MTJs with 0 <= x <= 0.25 reveals that V doping of the bottom electrode for x < 0.1 reduces in nearly 2 orders of magnitude the normalized nonmagnetic and magnetic 1/f noise. We attribute the enhanced TMR …
While the effects of lattice mismatch-induced strain, mechanical strain, as well as the intrinsic strain of thin films are sometimes detrimental, resulting in mechanical deformation and failure, strain can also be usefully harnessed for applications such as data storage, transistors, solar cells, and strain gauges, among other things. Here, we demonstrate that quantum transport across magnetic tunnel junctions (MTJs) can be significantly affected by the introduction of controllable mechanical strain, achieving an enhancement factor of ~2 in the experimental tunneling magnetoresistance (TMR) ra…
We demonstrate an electric-field control of tunneling magnetoresistance (TMR) effect in a semiconductor quantum-dot (QD) spin-valve device. By using ferromagnetic Ni nano-gap electrodes, we observe the Coulomb blockade oscillations at a small bias voltage. In the vicinity of the Coulomb blockade peak, the TMR effect is significantly modulated and even its sign is switched by changing the gate voltage, where the sign of the TMR value changes at the resonant condition.
Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we found were 73% for alumina and 323% for magnesia-based tunnel junctions. Additionally, tunnel junctions with a unified layer stack were prepared for the three different barriers. In these systems, the tunnel magnetoresistance ratios at optimum annealing temperatures were found to be 65% for alumina, 173% for magnesia, and 78% for the composite tunnel barrie…
We present an all-Heusler architecture which could be used as a rational design scheme for achieving high spin-filtering efficiency in the current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) devices. A Co2MnSi/Ni2NiSi/Co2MnSi trilayer stack is chosen as the prototype of such an architecture, of which the electronic structure and magnetotransport properties are systematically investigated by first principles approaches. Almost perfectly matched energy bands and Fermi surfaces between the all-Heusler electrode-spacer pair are found, indicating large interfacial spin-asymmetry, high …
We investigate bias voltage effects on the spin-dependent transport properties of Fe/MgAl${}_2$O${}_4$/Fe(001) magnetic tunneling junctions (MTJs) by comparing them with those of Fe/MgO/Fe(001) MTJs. By means of the nonequilibrium Green's function method and the density functional theory, we calculate bias voltage dependences of magnetoresistance (MR) ratios in both the MTJs. We find that in both the MTJs, the MR ratio decreases as the bias voltage increases and finally vanishes at a critical bias voltage $V_{\rm c}$. We also find that the critical bias voltage $V_{\rm c}$ of the MgAl${}_2$O${…
Spin-resolved electron symmetry filtering is a key mechanism behind giant tunneling magnetoresistance (TMR) in Fe/MgO/Fe and similar magnetic tunnel junctions (MTJs), providing room temperature functionality in modern spin electronics. However, the core process of the electron symmetry filtering breaks down under applied bias, dramatically reducing the TMR above 0.5 V. This strongly hampers the application range of MTJs. To circumvent the problem, resonant tunneling between ferromagnetic electrodes through quantum well states in thin layers has been used so far. This mechanism, however, is mai…
For spin-polarized junctions of ferromagnetically contacting multiple conductive paths, such as ferromagnet (FM)/atomic wires/FM and FM/carbon nanotubes/FM junctions, we theoretically investigate spin-dependent transport to elucidate the intrinsic relation between the number of paths and conduction, and to enhance the magnetoresistance (MR) ratio. When many paths are randomly located between the two FMs, electronic wave interference between the FMs appears, and then the MR ratio increases with increasing number of paths. Furthermore, at each number of paths, the MR ratio for carbon nanotubes b…
We created epitaxial magnetic tunnel junctions of FeCo/MgO/EuS on MgO buffered Si (100). Tunnel magnetoresistance reached up to 64% at 4.2 K. An unexpected fast drop of magnetoresistance was recorded for MgO thickness above 1 nm, which is attributed to the forced nonspecular conductance across the EuS conduction band minimum located at the X point, rather than the desired Delta_1 conductance centered around the Gamma point.
A tunnel magnetic junction is considered with magnetic hard and magnetic soft layers of cubic symmetry. The magnetic switching is analyzed of the layers by a magnetic field perpendicular to the initial magnetizations. In such a situation, an additional peak of the TMR ratio appears at the magnetic field value lower substantially than the anisotropy energy of the soft layer.
A magnetic tunnel junction Fe3O4/MgO/Fe with (001) layer orientation is considered. The junction magnetic energy is analyzed as a function of the angle between the layer magnetization vectors under various magnetic fields. The tunnel magnetoresistance is calculated as a function of the external magnetic field. In contrast with junctions with unidirectional anisotropy, a substantially lower magnetic field is required for the junction switching.
Magnetic tunnel junctions with the layer sequence Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al/MgO/CoFe were fabricated by magnetron sputtering at room temperature (RT). The samples exhibit a large inverse tunneling magnetoresistance (TMR) effect of up to -66% at RT. The largest value of -84% at 20 K reflects a rather weak influence of temperature. The dependence on the voltage drop shows an unusual behavior with two almost symmetric peaks at $\pm600$ mV with large inverse TMR ratios and small positive values around zero bias.
We report on systematic ab-initio investigations of Co and Cr interlayers embedded in Fe(001)/MgO/Fe(001) magnetic tunnel junctions, focusing on the changes of the electronic structure and the transport properties with interlayer thickness. The results of spin-dependent ballistic transport calculations reveal options to specifically manipulate the tunnel magnetoresistance ratio. The resistance area products and the tunnel magnetoresistance ratios show a monotonous trend with distinct oscillations as a function of the Cr thickness. These modulations are directly addressed and interpreted by mea…
We report on the resonant tunneling effect and the increase of tunneling magnetoresistance (TMR) induced by it in ferromagnetic-semiconductor GaMnAs quantum-well heterostructures. The observed quantum levels of the GaMnAs quantum well were successfully explained by the valence-band kp model with the p-d exchange interaction. It was also found that the Fermi level of the electrode injecting carriers is important to observe resonant tunneling in this system.
We report on resonant tunneling magnetoresistance via localized states through a ZnSe semiconducting barrier which can reverse the sign of the effective spin polarization of tunneling electrons. Experiments performed on Fe/ZnSe/Fe planar junctions have shown that positive, negative or even its sign-reversible magnetoresistance can be obtained, depending on the bias voltage, the energy of localized states in the ZnSe barrier and spatial symmetry. The averaging of conduction over all localized states in a junction under resonant condition is strongly detrimental to the magnetoresistance.
The independent control of two magnetic electrodes and spin-coherent transport in magnetic tunnel junctions are strictly required for tunneling magnetoresistance, while junctions with only one ferromagnetic electrode exhibit tunneling anisotropic magnetoresistance dependent on the anisotropic density of states with no room temperature performance so far. Here we report an alternative approach to obtaining tunneling anisotropic magnetoresistance in alfa-FeRh-based junctions driven by the magnetic phase transition of alfa-FeRh and resultantly large variation of the density of states in the vicin…
Magnetite (Fe3O4) based tunnel junctions with turret/mesa structure have been investigated for different barrier materials (SrTiO3, NdGaO3, MgO, SiO2, and Al2O(3-x)). Junctions with a Ni counter electrode and an aluminium oxide barrier showed reproducibly a tunneling magnetoresistance (TMR) effect at room temperature of up to 5% with almost ideal switching behavior. This number only partially reflects the intrinsic high spin polarization of Fe3O4. It is considerably decreased due to an additional series resistance within the junction. Only SiO2 and Al2O(3-x) barriers provide magnetically decou…
We report tunnel magnetoresistance (TMR) ratios as high as 472% at room temperature and 804% at 5 K in pseudo-spin valve (SV) CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) annealed at 450oC, which is approaching the theoretically predicted value. By contrast, the TMR ratios for exchange-biased (EB) SV MTJs with a MnIr antiferromagnetic layer are found to drop when they are annealed at 450oC. Energy dispersive X-ray analysis shows that annealing at 450oC induces interdiffusion of Mn and Ru atoms into the MgO barrier and ferromagnetic layers in EB-SV MTJs. Mechanisms behind the different anne…
All-oxide magnetic tunnel junctions (MTJs) incorporating functional materials as insulating barriers have the potential of becoming the founding technology for novel multi-functional devices. We investigate, by first-principles density functional theory, the bias-dependent transport properties of an all-oxide SrRuO3/BaTiO3/SrRuO3 MTJ. This incorporates a BaTiO3 barrier which can be found either in a non-ferroic or in a ferroelectric state. In such an MTJ not only can the tunneling magnetoresistance reach enormous values, but also, for certain voltages, its sign can be changed by altering the b…
Recent studies on the electrical switching of tetragonal antiferromagnet (AFM) via N{é}el spin-orbit torque have paved the way for the economic use of antiferromagnetic materials. The most difficult obstacle that presently limits the application of antiferromagnetic materials in spintronics, especially in memory storage applications, could be the small and fragile magnetoresistance (MR) in the AFM-based nanostructure. In this study, we investigated the spin transports in Mn$_2$Au-based tunnel junctions based onthe first-principle scattering theory. Giant MRs more than $1000\%$ are predicted in…
Results of first-principles calculations of the Fe/GaAs/Ag(001) epitaxial tunnel junctions reveal that hybridization of interface resonances formed at both interfaces can enhance the tunnelling anisotropic magnetoresistance (TAMR) of the systems. This mechanism is manifested by a non-monotonic dependence of the TAMR effect on the thickness of the tunnel barrier, with a maximum for intermediate thicknesses. A detailed scan of k-resolved transmissions over the two-dimensional Brillouin zone proves an interplay between a few hybridization-induced hot spots and a contribution to the tunnelling fro…
We investigated the relationship between the tunnel magnetoresistance (TMR) ratio and the electrode structure in MgO-barrier magnetic tunnel junctions (MTJs). The TMR ratio in a MTJ with Co40Fe40B20 reference and free layers reached 355% at the post-deposition annealing temperature of Ta=400 degree C. When Co50Fe50 or Co90Fe10 is used for the reference layer material, no high TMR ratio was observed. The key to have high TMR ratio is to have highly oriented (001) MgO barrier/CoFeB crystalline electrodes. The highest TMR ratio obtained so far is 450% at Ta = 450 degree C in a pseudo spin-valve M…
In double spin filter (SF) tunnel junctions, the spin information is generated and analyzed purely from the SF effect with nonmagnetic electrodes. In this article we numerically evaluate the bias dependence of magnetoresistance in such tunnel junctions (nonmagnetic metal / SF / nonmagnetic insulator / SF / nonmagnetic metal), particularly in cases when different SF materials are utilized. A large magnetoresistance with nonmonotonic and asymmetric bias dependence is expected within the frame of WKB approximation. We illustrate the systematic influence of tunnel barrier height, tunnel barrier th…
Recently, magnetic tunnel junctions with perpendicular magnetized electrodes combined with exchange bias films have attracted large interest. In this paper we examine the tunnel magnetoresistance of Ta/Pd/IrMn/Co-Fe/Ta/Co-Fe-B/MgO/Co-Fe-B/capping/Pd magnetic tunnel junctions in dependence on the capping layer, i.e., Hf or Ta. In these stacks perpendicular exchange bias fields of -500\,Oe along with perpendicular magnetic anisotropy are combined. A tunnel magnetoresistance of $(47.2\pm 1.4)\%$ for the Hf-capped sample was determined compared to the Ta one $(42.6\pm 0.7)\%$ at room temperature. …
The magnetic tunnel junction is a cornerstone of spintronic devices and circuits, providing the main way to convert between magnetic and electrical information. In state-of-the-art magnetic tunnel junctions, magnesium oxide is used as the tunnel barrier between magnetic electrodes, providing a uniquely large tunnel magnetoresistance at room temperature. However, the wide bandgap and band alignment of magnesium oxide-iron systems increases the resistance-area product and causes challenges of device-to-device variability and tunnel barrier degradation under high current. Here, we study using fir…
In this paper, we attempt the theoretical modeling of the magnetic tunnel junctions with embedded magnetic and nonmagnetic nanoparticles (NPs). A few abnormal tunnel magnetoresistance (TMR) effects, observed in related experiments, can be easily simulated within our model: we found, that the suppressed TMR magnitudes and the TMR sign-reversing effect at small voltages are related to the electron momentum states of the NP located inside the insulating layer. All these TMR behaviors can be explained within the tunneling model, where NP is simulated as a quantum well (QW). The coherent (direct) d…
In recent years, bottom-up synthesis procedures have achieved significant advancements in atomically-controlled growth of several-nanometer-long graphene nanoribbons with armchair-shaped edges (AGNRs). This greatly encourages us to explore the potential of such well-defined AGNRs in electronics and spintronics. Here, we propose an AGNR based spin valve architecture that induces a large magnetoresistance up to 900%. We find that, when an AGNR is connected perpendicularly to zigzag-shaped edges, the AGNR allows for long-range extension of the otherwise localized edge state. The huge magnetoresis…
We calculate numerically the magnetization direction as function of magnetic field in the Stoner-Wohlfart theory and are able to reproduce the shape of the low-field magnetoresistance hysteresis observed in manganite grain boundary junctions. Moreover, we show that it is necessary to include biaxial magnetocrystalline anisotropy to fully describe the grain boundary magnetoresistance in La$_{0.7}$Sr$_{0.3}$MnO$_3$/SrTiO$_3$ bicrystal tunnel junctions.
Controlling the stacking of van der Waals (vdW) materials is found to produce exciting new findings, since hetero- or homo- structures have added the diverse possibility of assembly and manipulated functionalities. However, so far, the homostructure with a twisted angle based on the magnetic vdW materials remains unexplored. Here, we achieved a twisted magnetic vdW Fe3GeTe2/Fe3GeTe2 junction with broken crystalline symmetry. A clean and metallic vdW junction is evidenced by the temperature-dependent resistance and the linear I-V curve. Unlike the pristine FGT, a plateau-like magnetoresistance …
We investigated dependence of tunnel magnetoresistance effect in CoFeB/MgO/CoFeB magnetic tunnel junctions on Ar pressure during MgO-barrier sputtering. Sputter deposition of MgO-barrier at high Ar pressure of 10 mTorr resulted in smooth surface and highly (001) oriented MgO. Using this MgO as a tunnel barrier, tunnel magnetoresistance (TMR) ratio as high as 355% at room temperature (578% at 5K) was realized after annealing at 325 C or higher, which appears to be related to a highly (001) oriented CoFeB texture promoted by the smooth and highly oriented MgO. Electron-beam lithography defined d…
We calculate the tunneling magnetoresistance (TMR) of Fe|ZnSe|Fe|ZnSe|Fe (001) double magnetic tunnel junctions as a function of the in-between Fe layer's thickness, and compare these results with those of Fe|ZnSe|Fe simple junctions. The electronic band structures are modeled by a parametrized tight-binding Hamiltonian fitted to ab initio calculations, and the conductance is calculated within the Landauer formalism expressed in terms of Green's functions. We find that the conductances for each spin channel and the TMR strongly depend on the in-between Fe layer's thickness, and that in some ca…
Fully-relativistic first-principles calculations of the Fe(001) surface demonstrate that resonant surface (interface) states may produce sizeable tunneling anisotropic magnetoresistance in magnetic tunnel junctions with a single magnetic electrode. The effect is driven by the spin-orbit coupling. It shifts the resonant surface band via the Rashba effect when the magnetization direction changes. We find that spin-flip scattering at the interface is controlled not only by the strength of the spin-orbit coupling, but depends strongly on the intrinsic width of the resonant surface states.
Spinel MgAl2O4 and family oxides are emerging barrier materials useful for magnetic tunnel junctions (MTJs). We report large tunnel magnetoresistance (TMR) ratios up to 429% at room temperature (RT) and 1,034% at 10 K in a Fe/MgAl2O4/Fe(001)-based MTJ prepared using electron-beam evaporation of Mg4Al-Ox. Resistance oscillations with a MTJ barrier thickness of 0.3-nm were significantly enhanced compared to those of a Fe/MgO/Fe(001) MTJ, resulting in a large TMR oscillation peak-to-valley difference of 125% at RT. The differential conductance spectra were symmetric with bias polarity, and the sp…
We investigated the relationship between tunnel magnetoresistance (TMR) ratio and the crystallization of CoFeB layers through annealing in magnetic tunnel junctions (MTJs) with MgO barriers that had CoFe/Ru/CoFeB synthetic ferrimagnet pinned layers with varying Ru spacer thickness (tRu). The TMR ratio increased with increasing annealing temperature (Ta) and tRu, reaching 361% at Ta = 425C, whereas the TMR ratio of the MTJs with pinned layers without Ru spacers decreased at Ta over 325C. Ruthenium spacers play an important role in forming an (001)-oriented bcc CoFeB pinned layer, resulting in a…
We demonstrate with first-principles electron transport calculations that large tunneling magnetoresistance (TMR) and tunneling electroresistance (TER) effects can coexist in an all-oxide device. The TMR originates from the symmetry-driven spin filtering provided by the insulating BaTiO3 barrier to the electrons injected from SrRuO3. In contrast the TER is possible only when a thin SrTiO3 layer is intercalated at one of the SrRuO3/BaTiO3 interfaces. As the complex band-structure of SrTiO3 has the same symmetry than that of BaTiO3, the inclusion of such an intercalated layer does not negatively…
