In this work we present the mathematical models for single-phase flow in fractured porous media. An overview of the most common approaches is considered, which includes continuous fracture models and discrete fracture models. For the latter, we discuss strategies that are developed in literature for its numerical solution mainly related to the geometrical relation between the fractures and porous media grids.
We present a novel hybridizable discontinuous Galerkin (HDG) method on unfitted meshes for single-phase Darcy flow in a fractured porous media. In particular we apply the HDG methodology to the recently introduced reinterpreted discrete fracture model (RDFM) [Xu & Yang, 2021 submitted] that use Dirac-$δ$ functions to model both conductive and blocking fractures. Due to the use of Dirac-$δ$ function approach for the fractures, our numerical scheme naturally allows for unfitted meshes with respect to the fractures, which is the major novelty of the proposed scheme. Moreover, the scheme is locall…
Development of models and dedicated numerical methods for dynamics in fractured rocks is an active research field, with research moving towards increasingly advanced process couplings and complex fracture networks. The inclusion of coupled processes in simulation models is challenged by the high aspect ratio of the fractures, the complex geometry of fracture networks and the crucial impact of processes that completely change characteristics on the fracture-rock interface. This paper provides a general discussion of design principles for introducing fractures in simulators, and defines a framew…
Biot's theory provides a framework for computing seismic wavefields in fluid saturated porous media. Here we implement a velocity-stress staggered grid 2D finite difference algorithm to model the wave-propagation in poroelastic media. The Biot's equation of motion are formulated using a finite difference algorithm with fourth order accuracy in space and second order accuracy in time. Seismic wave propagation in reservoir rocks is also strongly affected by fractures and faults. We next derive the equivalent media model for fractured porous rocks using the linear slip model and perform numerical…
Numerical simulation of multiphase compositional flow in fractured porous media, when all the species can transfer between the phases, is a real challenge. Despite the broad applications in hydrocarbon reservoir engineering and hydrology, a compositional numerical simulator for three-phase flow in fractured media has not appeared in the literature, to the best of our knowledge. In this work, we present a three-phase fully compositional simulator for fractured media, based on higher-order finite element methods. To achieve computational efficiency, we invoke the cross-flow equilibrium (CFE) con…
Geological settings with reservoir characteristics include fractures with different material and geometrical properties. Hence, numerical simulations in applied geophysics demands for computational frameworks which efficiently allow to integrate various fracture geometries in a porous medium matrix. This study presents a modeling approach for single-phase flow in fractured porous media and its application to different types of non-conforming mesh models. We propose a combination of the Lagrange multiplier method with variational transfer to allow for complex non-conforming geometries as well a…
Deformable fractured porous media appear in many geoscience applications. While the extended finite element (XFEM) has been successfully developed within the computational mechanics community for accurate modeling of the deformation, its application in natural geoscientific applications is not straightforward. This is mainly due to the fact that subsurface formations are heterogeneous and span large length scales with many fractures at different scales. In this work, we propose a novel multiscale formulation for XFEM, based on locally computed basis functions. The local multiscale basis functi…
We present a new implicit higher-order finite element (FE) approach to efficiently model compressible multicomponent fluid flow on unstructured grids and in fractured porous subsurface formations. The scheme is sequential implicit: pressures and fluxes are updated with an implicit Mixed Hybrid Finite Element (MHFE) method, and the transport of each species is approximated with an implicit second-order Discontinuous Galerkin (DG) FE method. Discrete fractures are incorporated with a cross-flow equilibrium approach. This is the first investigation of all-implicit higher-order MHFE-DG for unstruc…
Multiscale model reduction for shale gas transport in fractured media
Texas A & M University（德克萨斯农工大学）；Texas A&M University（德克萨斯农工大学）；Institute of Mathematics and Informatics, North-Eastern Federal University（东北联邦大学数学与计算机科学研究所）；Institute for Scientific Computation, Texas A&M University（德克萨斯农工大学科学计算研究所）
We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters were loosely based on field site characterizations. We also considered five network densities, which were defined using a dimensionless version of density based on percolation theory. Once the network…
An open-sourced multiphase Darcy-Brinkman approach is proposed to simulate two-phase flow in hybrid systems containing both solid-free regions and porous matrices. This micro-continuum model is rooted in elementary physics and volume averaging principles, where a unique set of partial differential equations is used to represent flow in both regions and scales. The crux of the proposed model is that it tends asymptotically towards the Navier-Stokes volume-of-fluid approach in solid-free regions and towards the multiphase Darcy equations in porous regions. Unlike existing multiscale multiphase s…
A parallel reservoir simulator has been developed, which is designed for large-scale black oil simulations. It handles three phases, including water, oil and gas, and three components, including water, oil and gas. This simulator can calculate traditional reservoir models and naturally fractured models. Various well operations are supported, such as water flooding, gas flooding and polymer flooding. The operation constraints can be fixed bottom-hole pressure, a fixed fluid rate, and combinations of them. The simulator is based on our in-house platform, which provides grids, cell-centred data, …
The aim of the thesis is to present and analyze two particular problems of transport in porous media flow. The first of them is related to the process of saturation of porous building materials. Recently, M. Küntz and P. Lavalée, using a computer model of this process, have concluded that the anomalous diffusion assumption is correct. In this thesis I present an alternative explanation of this results without any refer to anomalous diffusion. The second part of the thesis covers the numerical analysis of the tortuosity of the flow -- one of a very interesting physical macroscopic variables cha…
The linear transport theory is developed to describe the time dependence of the number density of tracer particles in porous media. The advection is taken into account. The transport equation is numerically solved by the analytical discrete ordinates method. For the inverse Laplace transform, the double-exponential formula is employed.
Yield-stress is a problematic and controversial non-Newtonian flow phenomenon. In this article, we investigate the flow of yield-stress substances through porous media within the framework of pore-scale network modeling. We also investigate the validity of the Minimum Threshold Path (MTP) algorithms to predict the pressure yield point of a network depicting random or regular porous media. Percolation theory as a basis for predicting the yield point of a network is briefly presented and assessed. In the course of this study, a yield-stress flow simulation model alongside several numerical algor…
In this paper, a multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is developed for simulating incompressible axisymmetric thermal flows in porous media at the representative elementary volume (REV) scale. In the model, a D2Q9 MRT-LB equation is proposed to solve the flow field in addition to the D2Q5 LB equation for the temperature field. The source terms of the model are simple and contain no velocity and temperature gradient terms. The generalized axisymmetric Navier-Stokes equations for axisymmetric flows in porous media are correctly recovered from the MRT-LB model through the C…
