Designing high potential cathodes for Na-ion batteries, which are comparable in performance to Li-ion cathodes, remains a challenging task. Through comprehensive density functional calculations, we disentangle the relationship between the cathode potential and the ionicity of $TM-O$ bonds in $O3$ $NaTMO_2$ compounds in which TM ions is a fourth- or fifth-row transition metal. We demonstrate that the magnetic exchange interaction and the local distortions in the coordination environment of TM ions play more significant roles in determining the cathode potential of the $TM^{3+}$ $\to$ $TM^{4+}+ e^-$ reaction than the ionicity of the $TM-O$ bonds in these compounds. These results indicate that designing cathode materials solely based on empirical electronegativity values to achieve high potential may not be a feasible strategy without taking into account a detailed structural assessment.
Natural abundance of sodium and its similar behavior to lithium triggered recent extensive studies of cost-effective sodium-ion batteries (SIBs) for large-scale energy storage systems. A challenge is to develop electrode materials with a high electrode potential, specific capacity and a good rate capability. In this work we propose mixed eldfellite compounds \ce{Na_x(Fe_{1/2}M_{1/2})(SO4)2} (M = Mn, Co, Ni) as a new family of high electrode potential cathodes of SIBs and present their material properties predicted by first-principles calculations. The structural optimizations show that these m…
Critical to the development of improved solid oxide fuel cell (SOFC) technology are novel compounds with high oxygen reduction reaction (ORR) catalytic activity and robust stability under cathode operating conditions. Approximately 2145 distinct perovskite compositions are screened for potential use as high activity, stable SOFC cathodes, and it is verified that the screening methodology qualitatively reproduces the experimental activity, stability, and conduction properties of well-studied cathode materials. The calculated oxygen p-band center is used as a first principle-based descriptor of …
Mg batteries utilizing a Mg metal anode with a high-voltage intercalation cathode define a potential pathway toward energy storage with high energy density. However, the realization of Mg batteries is plagued by the instability of existing electrolytes against the Mg-metal anode and high-voltage cathode materials. One viable solution to this problem is the identification of protective coating materials that could effectively separate the distinct chemistries of the metal-anode and the cathode materials from the electrolyte. Using first-principles calculations we map the electrochemical stabili…
Despite the importance of the electron correlation in the first-principles description of the Li-ion cathode materials, the Coulomb interaction parameter, U is often treated as an ad hoc value. In practice, one usually relies on empirical ways of parametric treatment of U to optimally match the experimentally observed physical properties such as band gap or reaction energy. Here, using constrained random phase approximation (cRPA) method, we self-consistently evaluate the Coulomb U and Hund J values for representative layered cathode materials including not only Li compounds but also Na compou…
Up to now, many guest atoms/molecules/ions have been successfully synthesized into graphite to form the various compounds. For example, alkali-atom graphite intercalation compounds are verified to reveal the stage-n structures, including LiC6n and LiM8n [M=K. Rb and Cs; n=1, 2, 3; 4]. On the other side, AlCl4-ion/molecule ones are examined to show stage-4 and stage-3 cases at room and lower temperatures, respectively. Stage-1 and stage-2 configurations, with the higher intercalant concentrations, are unable to synthesize in experimental laboratories. This might arise from the fact that it is q…
The design of novel cathode materials for Li-ion batteries would greatly benefit from accurate first-principles predictions of structural, electronic, and magnetic properties as well as intercalation voltages in compounds containing transition-metal elements. For such systems, density-functional theory (DFT) with standard (semi-)local exchange-correlation functionals is of limited use as it often fails due to strong self-interaction errors that are especially relevant in the partially filled $d$ shells. Here, we perform a detailed comparative study of the phospho-olivine cathode materials Li$_…
Transition-metal compounds pose serious challenges to first-principles calculations based on density-functional theory (DFT), due to the inability of most approximate exchange-correlation functionals to capture the localization of valence electrons on their $d$ states, essential for a predictive modeling of their properties. In this work we focus on two representatives of a well known family of cathode materials for Li-ion batteries, namely the orthorhombic LiMPO$_4$ olivines (M = Fe, Mn). We show that extended Hubbard functionals with on-site ($U$) and inter-site ($V$) interactions (so called…
Graphite has been reported to have anion as well as cation intercalation capacities as both cathode and anode host materials for the dual ion battery. In this work, we study the intercalation of bis(trifluoromethanesulfonyl) imide (TFSI) anion from ionic liquid electrolyte into graphite with first-principles calculations. We build models for TFSI-C$_n$ compounds with systematically increasing unit cell sizes of graphene sheet and investigate their stabilities by calculating the formation energy, resulting in the linear decrease and arriving at the limit of stability. With identified unit cell …
Traditional approaches to identify ion-transport pathways often presume equal probability of occupying all hopping sites and focus entirely on finding the lowest migration barrier channels between them. Although this strategy has been applied successfully to solid-state Li battery materials, which historically have mostly been ordered frameworks, in the emerging class of disordered electrode materials some Li-sites can be significantly more stable than others due to a varied distribution of transition metal (TM) environments. Using kinetic Monte Carlo simulations, we show that in such cation-d…
The polyanionic compound Na2MnSiO4 is regarded as one of the promising cathode materials for Na-ion batteries due to good specific capacity with its attractive prospect of utilization of two electrons in the redox processes. So, in this study, we have performed the thermodynamic and electronic structure analysis of Na2MnSiO4 using first principles density functional theory calculations. The intermediate ground state configurations for Na2MnSiO4of Na de-intercalation were found using the cluster expansion method and are used to obtain the 0 K voltage profile as a function of Na concentration. T…
Potassium-ion ($\rm K$-ion) rechargeable batteries; considered to be lucrative low-cost battery options for large-scale and capacious energy storage systems, have been garnering tremendous attention in recent years. However, due to the scarcity of cathode materials that can condone the reversible re-insertion of the large $\rm K$-ions at feasible capacities, the viability of $\rm K$-ion batteries has been greatly undercut. In this paper, we explore a potential cathode material in the $\rm K_2O$-$\rm Fe_2O_3$-$\rm MnO_2$ ternary phase system, that not only demonstrates reversible $\rm K$-ion re…
This report presents consistent insight into the mechanism behind the unusual behavior of nitride compounds from the perspective of tetrahedron bond formation and its consequence on valence density of states. An extension of the recent bond-band-barrier (BBB) correlation mechanism for oxidation [Sun CQ, Prog Mater Sci 2003;48:521-685] to the electronic process of nitridation has led to the essentiality of sp-orbital hybridization for a nitrogen atom upon interacting with atoms in solid phase of arbitrary less-electronegative element. In the process of nitridation, a nitrogen atom forms a quasi…
A major bottleneck for the development of Mg batteries is the identification of liquid electrolytes that are simultaneously compatible with the Mg-metal anode and high-voltage cathodes. One strategy to widen the stability windows of current non-aqueous electrolytes is to introduce protective coating materials at the electrodes, where coating materials are required to exhibit swift Mg transport. In this work, we use a combination of first-principles calculations and ion-transport theory to evaluate the migration barriers for nearly 27 Mg-containing binary, ternary, and quaternary compounds span…
The electronic structure of LiNiO$_2$, a promising Li-ion battery cathode material, has remained a challenge to understand due to its highly covalent yet correlated nature. Here we elucidate the electronic structure in LiNiO$_2$ and the related compound NaNiO$_2$ using x-ray absorption spectra (XAS) and quantum many-body calculations. Notably, we use inverse partial fluorescence yield to correctly measure the Ni $L$-edge XAS, which is inaccurate using conventional methods. We show that the XAS are indicative of a strong Jahn-Teller effect in NaNiO$_2$ and a bond disproportionated state in LiNi…
The Li2SiO3 compound, a ternary electrolyte compound of Lithium-ion based batteries, exhibits unique geometric and band structures, an atom-dominated energy spectrum, charge densities distributions, atom and orbital-projected density of states, and strong optical responses. The state-of-the-art analysis, based on an ab-initio simulation, have successfully confirmed the concise physical/chemical picture and the orbital bonding in Li-O and Si-O bonds. Additionally, the unusual optical response behavior includes a large redshift of the onset frequency due to the extremely strong excitonic effect,…
The 3D ternary Li$_2$GeO$_3$ compound, which could serve as the electrolyte material in Li+-based batteries, exhibits an unusual lattice symmetry (orthorhombic crystal), band structure, charge density distribution and density of states. The essential properties are fully explored through the first-principles method. In the delicate calculations and analyses, the main features of atom-dominated electronic energy spectrum, space-charge distribution, and atom-/orbital-projected density of states are suffi$cient to identify the critical multi-orbital hybridizations of the chemical bonds: 2s-(2p$_x…
Muon spin spectroscopy ($μ^+$SR) is now an established method to measure atomic scale diffusion coefficients of ions in oxides. This is achieved via the ion hopping rate, which causes periodic change in the local magnetic field at the muon site(s). We present here the first systematic study on a single crystalline sample. The highly anisotropic diffusion of Li-ions in the battery cathode material LiFePO$_4$, combined with the extensive investigation of this material with $μ^+$SR and other techniques make it a perfect model compound for this study. With this experiment we can confirm that Li di…
Magnetic order and Li-diffusion in the 1/3-filled Kagome layers of antiperovskite Lithium-ion battery materials (Li$_2$Fe)SO and (Li$_2$Fe)SeO
Technische Universität Dresden（德累斯顿工业大学）；Leibniz Institute for Solid State and Materials Research Dresden（德累斯顿莱布尼茨固体与材料研究所）；Kirchhoff Institute for Physics, Heidelberg University（海德堡大学基尔霍夫物理研究所）；Department of Physics, Faculty of Science, Sohag University（索哈格大学理学院物理系）
