Eloy de Lera Acedo, Hardie Pienaar, Nima Razavi Ghods, Jens Abraham, Edgar Colin Beltran, Ben Mort, Fred Dulwich, Giuseppe Virone, Benedetta Fiorelli, Michiel A… 展开作者
Eloy de Lera Acedo, Hardie Pienaar, Nima Razavi Ghods, Jens Abraham, Edgar Colin Beltran, Ben Mort, Fred Dulwich, Giuseppe Virone, Benedetta Fiorelli, Michiel Arts, Christophe Craeye, Bui van Ha, Keith Grainge, Peter Dewdney, Jeff Wagg, Maria Grazia Labate, Andrew Faulkner, Jan Geralt bij de Vaate, Marchel Gerbers
This report was submitted as part of the SKA Low Frequency Aperture Array Critical Design Review describing the design of the SKA1-LOW station that took place between 2013 and 2018.
The SKA1 LOW field station is inscribed in a circular area having an effective station diameter (centre to centre) of 38 meters and has 256 SKALA4 elements. This document describes the electromagnetic design of the field station. In particular it describes the layout design and the electromagnetic modelling and characteristics of the station. This document describes the effects associated with the layout and array such as mutual coupling effects, side lobe pattern and beam shape (eg. smoothness, calibration models) and presents the state of the art of our ability to measure the array performance and validate the simulation work. The current LFAA field node requirements, derived from the SKA L1 requirements, have evolved over the last years since the LFAA PDR and the System Baseline Design. The SKA1 LOW field station has been designed to meet those requirements and has therefore tracked their evolution (eg. sensitivity requirements, array diameter, etc.). The aforementioned requirements represent a very tight space with a desire for very high sensitivity over a large frequency range (7 to 1) and wide field of view (90 degrees cone around zenith) while keeping the station diameter to a minimum, so as the filling factor but at the same time allowing for sufficient space between antennas to allow for easy maintenances, amongst many others. This results in a complex design.
This document was submitted as part of the SKA Low Frequency Aperture Array Critical Design Review describing the electromagnetic design of the SKA1-LOW antenna that took place between 2013 and 2018. The SKA1 LOW antenna has been developed over the last decade. Since 2011 an antenna of the type Log-Periodic Antenna that is now in its 4th iteration, SKALA4 (SKA Log-periodic Antenna v4), has been developed and was the selected candidate for SKA1-LOW after the Cost Control project efforts of 2017. This document describes the electromagnetic design of the antenna. In the submission for the antenna…
The low frequency component of the Square Kilometre Array (SKA1-Low) will be an aperture phased array located at the Murchison Radio-astronomy Observatory (MRO) site in Western Australia. It will be composed of 512 stations, each of them consisting of 256 log-periodic dual polarized antennas, and will operate in the low frequency range (50 MHz - 350 MHz) of the SKA bandwidth. The Aperture Array Verification System 2 (AAVS2), operational since late 2019, is the last full-size engineering prototype station deployed at the MRO site before the start of the SKA1-Low construction phase. The aim of t…
The SKA will be the largest radio astronomy observatory ever built, providing unprecedented sensitivity over a very broad frequency (50 MHz to 15.3 GHz). The SKA-Low (50 - 350 MHz), will be built at the MRO in Western Australia. It will consist of 512 stations each composed of 256 dual-polarised antennas, and the sensitivity of an individual station is pivotal to the performance of the entire SKA-Low telescope. The answer to the question in the title is, it depends. The sensitivity of a low frequency array, such as an SKA-Low station, depends strongly on the pointing direction of the digitally…
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous generation instruments, as well as the motivation for the changes. Using the array as an imaging interferometer, we measure the sensitivity of the array at five frequencies ranging from 70 to 320 MHz…
This decade, the Square Kilometre Array (SKA) will perform its first observations. Preparations for building dishes, antennas, correlators and infrastructure are well underway. Concurrently, software for the processing of SKA observations is developed at a number of levels. At a more basic level there are the telescope monitoring and control systems and also the correlator software. On top of that, in order to deliver science ready data products, software pipelines are needed for radio frequency interference (RFI) mitigation, averaging, calibration and imaging. Here, we focus on the SAGECal ca…
Detection of intended and unintended emissions from Starlink satellites in the SKA-Low frequency range, at the SKA-Low site, with an SKA-Low station analog
This paper deals with the calibration of the analogue chains of a Square Kilometre Array (SKA) phased aperture array station, using embedded element patterns (one per antenna in the array, thus accounting for the full effects of mutual coupling) or average element patterns to generate model visibilities. The array is composed of 256 log-periodic dipole array antennas. A simulator capable of generating such per-baseline model visibility correlation matrices was implemented, which allowed for a direct comparison of calibration results using StEFCal (Statistically Efficient and Fast Calibration) …
National Astronomical Research Institute of Thailand（泰国国家天文研究所）；Yamaguchi University（山口大学）；National Astronomical Observatory of Japan（日本国立天文台）；Tohoku University（东北大学）；Japan Aerospace Exploration Agency（日本宇宙航空研究开发机构）；Kumamoto University（熊本大学）；Tata Institute of Fundamental Research（塔塔基础研究所）；Shanghai Astronomical Observatory, Chinese Academy of Sciences（中国科学院上海天文台）
The Square Kilometre Array (SKA) will be the first low-frequency instrument with the capability to directly image the structures of the Epoch of Reionization (EoR). Indeed, deep imaging of the EoR over 5 targeted fields of 20 square degrees each has been selected as the highest priority science objective for SKA1. Aiming at preparing for this highly challenging observation, we perform an extensive pre-selection of the `quietest' and `cleanest' candidate fields in the southern sky to be suited for deep imaging of the EoR using existing catalogs and observations over a broad frequency range. The…
50-250 MHz Pulsar Census with an SKA-Low prototype station: Spectra and Polarization
International Centre for Radio Astronomy Research, Curtin University（国际射电天文研究中心，科廷大学）；SKAO, Science Operations Centre, CSIRO ARRC（平方公里阵列望远镜组织，科学运营中心，CSIRO ARRC）
We present the first southern-hemisphere all-sky imager and radio-transient monitoring system implemented on two prototype stations of the low-frequency component of the Square Kilometre Array. Since its deployment the system has been used for real-time monitoring of the recorded commissioning data. Additionally, a transient searching algorithm has been executed on the resulting all-sky images. It uses a difference imaging technique, and has enabled identification of a wide variety of transient classes, ranging from human-made radio-frequency interference to genuine astrophysical events. Obser…
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas w…
The ambitious scientific goals of SKA require a matching capability for calibration of instrumental and atmospheric propagation contributions as functions of time, frequency and position. The development of novel calibration algorithms to meet these requirements is an active field of research. In this work {we aim to characterize} these, focusing on the spatial and temporal structure scales of the ionospheric effects; ultimately, these provide the guidelines for designing the optimum calibration strategy. We used empirical ionospheric measurements at the site where the SKA-Low will be built, u…
This paper presents a framework to compute the receiver noise temperature (Trcv) of two low-frequency radio telescopes, the Murchison Widefield Array (MWA) and the Engineering Development Array (EDA). The MWA was selected because it is the only operational low-frequency Square Kilometre Array (SKA) precursor at the Murchison Radio-astronomy Observatory, while the EDA was selected because it mimics the proposed SKA-Low station size and configuration. It will demonstrated that the use of an existing power wave based framework for noise characterization of multiport amplifiers is sufficiently gen…
The LOw-Frequency ARray is a low-frequency radio interferometer composed by observational stations spread across Europe and it is the largest precursor of SKA in terms of effective area and generated data rates. In 2018, the Italian community officially joined LOFAR project, and it deployed a distributed computing and storage infrastructure dedicated to LOFAR data analysis. The infrastructure is based on 4 nodes distributed in different Italian locations and it offers services for pipelines execution, storage of final and intermediate results and support for the use of the software and infrast…
