A fundamental building block for on-chip quantum photonics is a single-photon source with high repetition rates, which can enable many applications such as high-speed quantum communication and quantum information processing. Ideally, such single photon sources would then require a large on-chip photon extraction decay rate, namely the rate of excited photons coupled into nanofibers or waveguides, over a broad spectral range. However, this goal has remained elusive till date. Here we propose a feasible scheme to enhance the on-chip photon extraction decay rate of quantum emitters, through the tilting of the optical axis of hyperbolic metamaterials with respect to the end-facet of nanofibers. Importantly, the revealed scheme is applicable to arbitrarily orientated quantum emitters over a broad spectral range, e.g., up to ~80 nm for visible light. The underlying physics relies on the emerging unique feature of hyperbolic metamaterials if their optical axis is judiciously tilted. That is, their supported high-k (i.e., wavevector) hyperbolic eigenmodes, which are intrinsically confined inside them if their optical axis is un-tilted, can now become momentum-matched with the guided modes of nanofibers, and more importantly, they can safely couple into nanofibers almost without reflection.
We report the broadband (~ 25 nm) enhancement of radiative decay rate of colloidal quantum dots by exploiting the hyperbolic dispersion of a one-dimensional nonmagnetic metamaterial structure.
We propose a design for broadband waveguide mode conversion based on gradient index metamaterials (GIMs). Numerical simulations demonstrate that the zeroth order of transverse magnetic mode or the first order of transverse electric mode (TM0/TE1) can be converted into the first order of transverse magnetic mode or the second order of transverse electric mode (TM1/TE2) for a broadband of frequencies. As an application, an asymmetric propagation is achieved by integrating zero index metamaterials inside the GIM waveguide.
We demonstrated a 2D helical chiral metamaterial that exhibits broadband strong optical activity resulting nonresonant Drude-like response. The strong chirality leads to broadband negative refractive index with high figure of merit (>90) and extremely low loss (<2% per layer). The optical activity are insensitive to the angles of incident electromagnetic waves, thereby enabling more flexibility in polarization manipulation applicaitons.
We experimentally demonstrate a broadband enhancement of emission from nitrogen vacancy centers in nanodiamonds. The enhancement is achieved by using a multilayer metamaterial with hyperbolic dispersion. The metamaterial is fabricated as a stack of alternating gold and alumina layers. Our approach paves the way towards the construction of efficient single-photon sources as planar on-chip devices.
Light absorption plays an important role in many research areas. Here, we propose and demonstrate a thin ultra-broadband strong light absorber consisting of periodic taper arrays on a gold substrate.
Because of the strong inherent resonances, the giant optical activity obtained via chiral metamaterials generally suffers from high dispersion, which has been a big stumbling block to broadband applications. In this paper, we propose a type of chiral metamaterial consisting of interconnected metal helix structures with four-fold symmetry, which exhibits nonresonant Drude-like response and can therefore avoid the highly dispersive optical activity resulting from resonances. It shows that the well-designed chiral metamaterial can achieve nondispersive and pure optical activity with high transmit…
We theoretically demonstrate a non-hermitian metamaterial exhibiting broadband and wide-angle nonreciprocity. The metamaterial consists of planar metal-dielectric layers with a Parity-Time (PT) symmetric distrubtion of loss and gain. With increasing loss and gain, the bandstructure and bandgap are strongly modified; further, the PT potential leads to distinct internal field distributions when illuminated from different sides. Including nonlinearities arising from natural loss and gain saturation leads to nonreciprocal transmission in the visible over a 50 nm wavelength and 60$^{\circ}$ degree …
This paper shows that customised broadband absorption of electromagnetic waves having arbitrary polarisation is possible by use of lossy cut-wire (CW) metamaterials. These useful features are confirmed by numerical simulations in which different lengths of CW pairs are combined as one periodic metamaterial unit and placed near to a perfect electric conductor (PEC). So far metamaterial absorbers have exhibited some interesting features, which are not available from conventional absorbers, e.g. straightforward adjustment of electromagnetic properties and size reduction. The paper shows how with …
We demonstrate a scheme to utilize the stacked fishnet metamaterial for all-angle negative refraction and subwavelength imaging within a wide frequency range starting from zero frequency. The theoretical predictions are verified by the finite-difference-in-time-domain (FDTD) numerical simulations. The phenomena come from the negative evanescent coupling between the adjacent slab waveguides through the breathing air holes perforated on metal layers.
Metamaterials, artificially engineered materials consisting of subwavelength unit cell, have shown potentials in light manipulation with their extraordinary optical properties. Especially, topological metamaterials possessing topologically protected surface states enable extremely robust control of light. Here, we demonstrate extremely broadband topological phase in a photonic topological metamaterials with double helix structure. In particular topological surface states are observed for all the frequencies below a certain cut-off, originating from a double Weyl point at zero frequency. The ex…
In this work, we treat the rotation of the optical axis as a new degree of freedom and theoretically propose a tilted linear-crossing metamaterials (TLCMM). Specifically, the conical dispersions of the NLCMM and TLCMM have the same shapes as type-I and type-II Dirac cones, respectively, in condensed matter physics. Upon rotating the optical axis angle such that it is equal to the cone angle, we find that this special TLCMM has the shape of a type-III Dirac cone. This critical TLCMM can have many unique properties and is of a fundamentally different nature than neighboring phases. When EM waves…
We report on design and fabrication of nano-composite metal-dielectric thin film coatings with high reflectance asymmetries. Applying basic dispersion engineering principles to model a broadband and large reflectance asymmetry, we obtain a model dielectric function for the metamaterial film, closely resembling the effective permittivity of disordered metal-dielectric nano-composites. Coatings realized using disordered nanocrystalline silver films deposited on glass substrates confirm the theoretical predictions, exhibiting symmetric transmittance, large reflectance asymmetries and a unique fla…
The concept of the broadband epsilon-near-zero meta-atom consisting of layered stacks with specified metallic filling ratio and thickness is proposed based on the Bergman spectral representation of the effective permittivity. The step-like metal-dielectric multilayer structures are designed to achieve realistic broadband epsilon-near-zero meta-atoms in optical frequency range. These meta-atoms can be integrated as building blocks for unconventional optical components with exotic electromagnetic properties over a wide frequency range, such as the demonstrated broadband directional emission and …
Designing broadband enhanced chirality is of strong interest to the emerging fields of chiral chemistry and sensing, or to control the spin orbital momentum of photons in recently introduced nanophotonic chiral quantum and classical optical applications. However, chiral light-matter interactions have an extremely weak nature, are difficult to be controlled and enhanced, and cannot be made tunable or broadband. In addition, planar ultrathin nanophotonic structures to achieve strong, broadband, and tunable chirality at the technologically important visible to ultraviolet spectrum still remain el…
We demonstrate a THz metamaterial with broadband dipole resonance originating due to the hybridization of LC resonances. The structure optimized by finite element method simulations is fabricated by electron beam lithography and characterized by terahertz time-domain spectroscopy. Numerically, we found that when two LC metamaterial resonators are brought together, an electric dipole resonance arises in addition to the LC resonances. We observed a strong dependence of the width of these resonances on the separation between the resonators. This dependence can be explained based on series and par…
In this paper, a kind of helix-like chiral metamaterial, which can be realized with multiple conventional lithography or electron beam lithographic techniques, is proposed to achieve broadband bianisotropic optical response analogous to helical metamaterial. On the basis of twisted metamaterial, via tailoring the relative orientation within the lattice, the anisotropy of arc is converted into magneto-electric coupling of closely spaced arc pairs, which leads to a broad bianisotropic optical response. By connecting the adjacent upper and lower arcs, the coupling of metasurface pairs is transfor…
We propose a concept of a low-symmetry three-dimensional metamaterial exhibiting a Double- Continuum Fano (DCF) optical resonance. Such metamaterial is described as a birefringent medium supporting a discrete "dark" electromagnetic state weakly coupled to the continua of two nondegen- erate "bright" bands of orthogonal polarizations. It is demonstrated that light propagation through such DCF metamaterial can be slowed down over a broad frequency range when the medium param- eters (e.g. frequency of the "dark" mode) are adiabatically changed along the optical path. Using a specific metamaterial…
We present an ultra broadband thin-film infrared absorber made of saw-toothed anisotropic metamaterial. Absorbtivity of higher than 95% at normal incidence is supported in a wide range of frequencies, where the full absorption width at half maximum is about 86%. Such property is retained well at a very wide range of incident angles too. Light of shorter wavelengths are harvested at upper parts of the sawteeth of smaller widths, while light of longer wavelengths are trapped at lower parts of larger tooth widths. This phenomenon is explained by the slowlight modes in anisotropic metamaterial wav…
A hybrid metal-graphene metamaterial (MM) is reported to achieve the active control of the broadband plasmon-induced transparency (PIT) in THz region. The unit cell consists of one cut wire (CW), four U-shape resonators (USRs) and monolayer graphene sheets under the USRs. Via near-field coupling, broadband PIT can be produced through the interference between different modes. Based on different arrangements of graphene positions, not only can we achieve electrically switching the amplitude of broadband PIT, but also can realize modulating the bandwidth of the transparent window. Simultaneously,…
We demonstrate how broadband angular selectivity can be achieved with stacks of one-dimensionally periodic photonic crystals, each consisting of alternating isotropic layers and effective anisotropic layers, where each effective anisotropic layer is constructed from a multilayered metamaterial. We show that by simply changing the structure of the metamaterials, the selective angle can be tuned to a broad range of angles; and, by increasing the number of stacks, the angular transmission window can be made as narrow as desired. As a proof of principle, we realize the idea experimentally in the m…
We propose a planar composite chiral metamaterial (CCMM) by symmetrically inserting a metallic mesh between two layers of conjugated gammadion resonators. As the elaborate CCMM operates in the frequency region of off-resonance, it therefore presents loss-less and dispersion-free features. It can achieve flat polarization rotation simultaneously accompanied with high transmission and extremely low ellipticity in a broad bandwidth. In the meanwhile, this intriguing CCMM shows more superiorities in polarization rotation power and operating bandwidth than the pure chiral metamaterial just composed…
We study theoretically and experimentally a novel type of metamaterial with hybrid elements composed of twisted pairs of cross-shaped meta-atoms and their complements. We reveal that such two-layer metasurfaces demonstrate large, dispersionless optical activity at the transmission resonance accompanied by very low ellipticity. We develop a retrieval procedure to determine the effective material parameters for this structure, which has lower-order symmetry ($\mathrm {C}_4$) than other commonly studied chiral structures. We verify our new theoretical approach by reproducing numerical and experim…
Multimode interference couplers are a fundamental building block in many integrated photonic systems, ranging from high-speed coherent receivers to quantum splitters. However, their basic structure has remained fundamentally unchanged for almost four decades, limiting their size and operation bandwidth. Using sub-wavelength metamaterials, photonic devices with break-through size and performance have been recently reported. Leveraging the inherent anisotropy of these structures, here we derive a semi-analytic expression that enables the design of compact and ultra broadband multimode interferen…
The recent advance in the assembly of metallic nanoparticles (NPs) has enabled sophisticated engineering of unprecedented light-matter interaction at the optical domain. In this work, I expand the design flexibility of NP optical metamaterial to push the upper limit of accessible refractive index to the unnaturally high regime. The precise control over the geometrical parameters of NP superlattice monolayer conferred the dramatic increase in electric resonance and related effective permittivity far beyond the naturally accessible regime. Simultaneously, effective permeability, another key fact…
In this article, a few-layered graphene-dielectric multilayer (metamaterial) electro-optic modulator has been proposed in the mid and far infrared range that works on electro-absorption mechanism. Graphene, both mono layer and few layer, is an actively tunable optical material that allows control of inter-band and intra-band transition by tuning its chemical potential. Utilizing this unique feature of graphene, we propose a multilayer graphene dielectric stack where few layer graphene is preferred over mono layer graphene. Although the total thickness of the stack still remains in the nanomete…
A metamaterial absorber converts solar radiation into heat for applications in thermoelectric generators and solar thermophotovoltaics. A metamaterial absorber typically consists of metallic parts separated by an insulator layer which does not allow the total heat extraction via direct heat conduction. Here, we propose wide-angle and broadband metamaterial absorber comprising an insulator layer, metal grating, and metal back plane (IMM) that allows the total heat extraction via direct heat conduction. We have formulated the quasi-analytical solution (QANS) of the IMM-absorber by applying the c…
Engineering the photonic density of states (PDOS) using resonant microcavities or periodic dielectric media gives control over a plethora of classical and quantum phenomena associated with light. Here, we show that nanostructured metamaterials with hyperbolic dispersion, possess a broad bandwidth singularity in the PDOS, an effect not present in any other photonic system, which allows remarkable control over light-matter interactions. A spectacular manifestation of this non-resonant PDOS alteration is the broadband Purcell effect, an enhancement in the spontaneous emission of a light source, w…
We report the experimental demonstration of broadband negative refractive index obtained in a labyrinthine acoustic metamaterial structure. Two different approaches were employed to prove the metamaterial negative index nature: one-dimensional extractions of effective parameters from reflection and transmission measurements, and two-dimensional prism-based measurements that convincingly show the transmission angle corresponding to negative refraction. The transmission angles observed in the latter case also agree very well with the refractive index obtained in the one-dimensional measurements …
A strategy is proposed to design the broadband gain-doped epsilon-near-zero (GENZ) metamaterial. Based on the Milton representation of effective permittivity, the strategy starts in a dimensionless spectral space, where the effective permittivity of GENZ metamaterial is simply determined by a pole-zero structure corresponding to the operating frequency range. The physical structure of GENZ metamaterial is retrieved from the pole-zero structure via a tractable inverse problem. The strategy is of great advantage in practical applications and also theoretically reveals the cancellation mechanism …
Localized cavity resonances due to nanostructures at material surfaces can greatly enhance radiative heat transfer (RHT) between two closely placed bodies owing to stretching of cavity states in momentum space beyond light line. Based on such understanding, we numerically demonstrate the possibility of ultra-broadband super-Planckian RHT between two plates patterned with trapezoidal-shaped hyperbolic metamaterial (HMM) arrays. The phenomenon is rooted not only in HMM's high effective index for creating sub-wavelength resonators, but also its extremely anisotropic isofrequency contour. The two …
We demonstrate that metamaterial devices requiring anisotropic dielectric permittivity and magnetic permeability may be emulated by specially designed tapered waveguides. This approach leads to low-loss, broadband performance. Based on this technique, we demonstrate broadband electromagnetic cloaking in the visible frequency range on a scale ~100 times larger than the wavelength.
We experimentally demonstrate that a thin (~150 nm) film of vanadium dioxide (VO2) deposited on sapphire has an anomalous thermal emittance profile when heated, which arises due to the optical interaction between the film and the substrate when the VO2 is at an intermediate state of its insulator-metal transition (IMT). Within the IMT region, the VO2 film comprises nanoscale islands of metal- and dielectric-phase, and can thus be viewed as a natural, disordered metamaterial. This structure displays "perfect" blackbody-like thermal emissivity over a narrow wavelength range (~40 cm-1), surpassin…
We develop the fluctuational electrodynamics of metamaterials with hyperbolic dispersion and show the existence of broadband thermal emission beyond the black body limit in the near field. This arises due to the thermal excitation of unique bulk metamaterial modes, which do not occur in conventional media. We consider a practical realization of the hyperbolic metamaterial and estimate that the effect will be observable using the characteristic dispersion (topological transitions) of the metamaterial states. Our work paves the way for engineering the near-field thermal emission using metamateri…
Increasing attention on microwave ultra-broadband metamaterial absorbers has been paid due to their promising applications. While most microwave ultra-broadband metamaterial absorbers developed so far are based on metallic resonant structures, dispersive dielectric water-based metamaterial opens a simpler and more versatile route for the construction of polarization- and angle- insensitive ultra-broadband absorption. Here, we review the recent progresses of water-based metamaterial absorber by providing an illustration of the mechanisms to realize ultra-broadband, tunable and multi-functional …
A general metallic mirror (i.e., a flat metallic surface) has been a popular optical component that can contribute broadband light absorption to thin-film optoelectronic devices; nonetheless, such electric mirror with a reversal of reflection phase inevitably causes the problem of minimized electric field near at the mirror surface (maximized electric field at one quarter of wavelength from mirror). This problem becomes more elucidated, when the deep-subwavelength-scaled two-dimensional (2D) material (e.g., graphene and molybdenum disulfide) is implemented into optoelectronic device as an acti…
Single-photon and correlated two-photon sources are important elements for optical information systems. Nonlinear downconversion light sources are robust and stable emitters of single photons and entangled photon pairs. However, the rate of downconverted light emission, dictated by the properties of low-symmetry nonlinear crystals, is typically very small, leading to significant constrains in device design and integration. In this paper, we show that the principles for spontaneous emission control (i.e. Purcell effect) of isolated emitters in nanoscale structures, such as metamaterials, can be…
A microwave ultra-broadband polarization-independent metamaterial absorber is demonstrated. It is composed of a periodic array of metal-dielectric multilayered quadrangular frustum pyramids. These pyramids possess resonant absorption modes at multi-frequencies, of which the overlapping leads to the total absorption of the incident wave over an ultra-wide spectral band. The experimental absorption at normal incidence is above 90% in the frequency range of 7.8-14.7GHz, and the absorption is kept large when the incident angle is smaller than 60 degrees. The experimental results agree well with th…
We propose herein a method of material-structure integrated design for broadband absorption of dielectric metamaterial, which is achieved by combination of genetic algorithm and simulation platform. A multi-layered metamaterial absorber with an ultra-broadband absorption from 5.3 to 18 GHz (a relative bandwidth of as high as 109%) is realized numerically and experimentally. In addition, simulated results demonstrate the proposed metamaterial exhibits good incident angle and polarization tolerance, which also are significant criteria for practical applications. By investigating the working prin…
We study metamaterials known as hyperbolic media that in the usual local-response approximation exhibit hyperbolic dispersion and an associated broadband singularity in the density of states. Instead, from the more microscopic hydrodynamic Drude theory we derive qualitatively different optical properties of these metamaterials, due to the free-electron nonlocal optical response of their metal constituents. We demonstrate that nonlocal response gives rise to a large-wavevector cutoff in the dispersion that is inversely proportional to the Fermi velocity of the electron gas, but also for small w…
Aligned, densely-packed carbon nanotube metamaterials prepared using vacuum filtration are an emerging infrared nanophotonic material. We report multiple hyperbolic plasmon resonances, together spanning the mid-infrared, in individual resonators made from aligned and densely-packed carbon nanotubes. In the first near-field scanning optical microscopy (NSOM) imaging study of nanotube metamaterial resonators, we observe distinct deeply-subwavelength field profiles at the fundamental and higher-order resonant frequencies. The wafer-scale area of the nanotube metamaterials allows us to combine thi…
In this paper, we employ the novel design of the metamaterial half-wave plate by using the multiple layers of the metamaterials with some specific rotation angles. The rotation angles are given by composite pulse control which is the well-known quantum control technique. A big advantage of this method can analytically calculate the rotation angles and can be easily extended to the multiple layers. The more layers of the metamaterials can present more bandwidth of half-wave plate. In this paper, we present 1, 3, 5, 7 configurations of layers of a metamaterial half-wave plate and we demonstrate …
We propose a thin, compact, broadband, polarization and angle insensitive metamaterial absorber based on a tungsten reflector, silicon spacer and a top pattern composed of a double square-like ring resonator utilizing nickel(Ni). In such a structure, a high absorption (above 80 %) bandwidth ~ 4.8 μm from 3.52 up to 8.32 μm corresponding to the relative bandwidth ~81% can be achieved with deeply subwavelength unit cell dimensions. Here the physical origin of the broadband absorption is associated with low Q-factor dipole modes of the top pattern inner and outer sides functioning as rectangular …
We present optically tunable magnetic 3D metamaterials at terahertz (THz) frequencies which exhibit a tuning range of ~30% of the resonance frequency. This is accomplished by fabricating 3D array structures consisting of double-split-ring resonators (DSRRs) on silicon-on-sapphire, fabricated using multilayer electroplating. Photoexcitation of free carriers in the silicon within the capacitive region of the DSRR results in a red-shift of the resonant frequency from 1.74 THz to 1.16 THz. The observed frequency shift leads to a transition from a magnetic-to-bianisotropic response as verified thro…
The nonlinear metamaterials have been shown to provide nonlinear properties with high nonlinear conversion efficiency and in a myriad of light manipulation. Here we study terahertz generation from nonlinear metasurface consisting of single layer nanoscale split-ring resonator array. The terahertz generation due to optical rectification by the second-order nonlinearity of the split-ring resonator is investigated by a time-domain implementation of the hydrodynamic model for electron dynamics in metal. The results show that the nonlinear metasurface enables us to generate broadband terahertz radi…
A metamaterial composed of thin metallic strips as an efficient broadband absorber in the mid-infrared spectrum is investigated. Here the matching between dielectric and geometrical properties of the individual elements is critical to ensure high absorption. Detailed theoretical analysis based on the electric dipole approximation is performed to characterize the absorption and scattering properties of the individual elements of the unit cell and the results are used to design the metamaterial composed of such configurations. The absorption cross-section of a strip-shaped element can exceed its…
We present the design, fabrication, and measured performance of metamaterial Anti-Reflection Cuttings (ARCs) for large-format alumina filters operating over more than an octave of bandwidth to be deployed on the Simons Observatory (SO). The ARC consists of sub-wavelength features diced into the optic's surface using a custom dicing saw with near-micron accuracy. The designs achieve percent-level control over reflections at angles of incidence up to 20$^\circ$. The ARCs were demonstrated on four 42 cm diameter filters covering the 75-170 GHz band and a 50 mm diameter prototype covering the 200-…
Time has emerged as a new degree of freedom for metamaterials, promising new pathways in wave control. However, electromagnetism suffers from limitations in the modulation speed of material parameters. Here we argue that these limitations can be circumvented by introducing a traveling-wave refractive index modulation, with the same phase velocity of the waves. We show how the concept of "luminal grating" can yield giant nonreciprocity, achieve efficient one-way amplification, pulse compression and frequency up-conversion, proposing a realistic implementation in double-layer graphene.
The trapped rainbow effect has been mostly found on tapered anisotropic metamaterials (MMs) made of low loss noble metals, such as gold, silver, etc. In this work, we demonstrate that an anisotropic MM waveguide made of high loss metal tungsten can also support the trapped rainbow effect similar to the noble metal based structure. We show theoretically that an array of tungsten/germanium anisotropic nano-cones placed on top of a reflective substrate can absorb light at the wavelength range from 0.3 micrometer to 9 micrometer with an average absorption efficiency approaching 98%. It is found th…
Optical phase shifters are extensively used in integrated optics not only for telecom and datacom applications, but also for sensors and quantum computing. While various active solutions have been demonstrated, progress in passive phase shifters is still lacking. Here, we present a new type of ultra-broadband 90° phase shifter, which exploits the anisotropy and dispersion engineering in subwavelength metamaterial waveguides. Our Floquet-Bloch calculations predict a phase shift error below $\pm$1.7° over an unprecedented operation range from 1.35 $μ$m to 1.75 $μ$m, i.e. 400 nm bandwidth coverin…
We verify the feasibility of the proposed theoretical strategy for designing the broadband near-zero permittivity (ENZ) metamaterial at optical frequency range with numerical simulations. In addition, the designed broadband ENZ stack are used as meta-atoms to build functional nanophotonic devices with extraordinary properties, including an ultranarrow electromagnetic energy tunneling channel and an ENZ concave focusing lens.
Radio Frequency Identification (RFID) and implantable biomedical devices need efficient power and data transfer with very low profile antennas. We propose a low profile electrically small antenna for near-field wireless power and data telemetry employing a metamaterial Split Ring Resonator (SRR) antenna. SRRs can be designed for operation over wide frequencies from RF to visible. However, they are inherently narrowband making them sensitive to component mismatch with respect to external transmit antenna. Here we propose an embedding of a non-foster impedance circuitry into the metamaterial SRR…
We model the broadband enhancement of single-photon emission from color centres in silicon carbide nanocrystals coupled to a planar hyperbolic metamaterial, HMM resonator. The design is based on positioning the single photon emitters within the HMM resonator, made of a dielectric index-matched with silicon-carbide material. The broadband response results from the successive resonance peaks of the lossy Fabry Perot structure modes arising within the high-index HMM cavity. To capture this broadband enhancement in the single photon emitters spontaneous emission, we placed a simple gold based cyli…
We theoretically investigate photothermal heating of ultra-flexible metamaterials, which are obtained by randomly mixing TiN nanoparticles in polydimethylsiloxane (PDMS). Due to the plasmonic properties of TiN nanoparticles, incident light is perfectly absorbed in a broadband range (300-3000 nm) to generate heat within these metamaterials. Under irradiation of an 808 nm near-infrared laser with different intensities, our predicted temperature rises as a function of time agree well with recent experimental data. For a given laser intensity, the temperature rise varies non-monotonically with con…
Pyramidal metamaterials are currently developed for ultra-broadband absorbers. They consist of periodic arrays of alternating metal/dielectric layers forming truncated square-based pyramids. The metallic layers of increasing lengths play the role of vertically and, to a less extent, laterally coupled plasmonic resonators. Based on detailed numerical simulations, we demonstrate that plasmon hybridization between such resonators helps in achieving ultra-broadband absorption. The dipolar modes of individual resonators are shown to be prominent in the electromagnetic coupling mechanism. Lateral co…
We derive an approach to define the causal direction of the wavevector of modes in optical metamaterials, which in turn, determines signs of refractive index and impedance as a function of {\it real and imaginary} parts of dielectric permittivity and magnetic permeability. We use the developed technique to demonstrate that the interplay between resonant response of constituents of metamaterials can be used to achieve efficient dispersion management. Finally we demonstrate broadband dispersion-less index and impedance matching in active nanowire-based negative index materials. Our work opens ne…
In this paper we demonstrate that asymmetric hyperbolic metamaterials (AHM) can produce strongly directive thermal emission in far-field zone, which exceeds Planck's limit. Asymmetry is inherent in an uniaxial medium, whose optical axes are tilted with respect to medium interfaces and appears as a difference in properties of waves, propagating upward and downward with respect to the interface. It's known that a high density of states (DOS) for certain photons takes place in usual hyperbolic metamaterials, but emission of them into a smaller number in vacuum is preserved by the total internal r…
We experimentally demonstrate the first metamaterial "illusion optics" device - an "invisible gateway" by using a transmission-line medium. The device contains an open channel that can block electromagnetic waves at a particular frequency range. We also demonstrate that such a device can work in a broad frequency range.
Silicon photonic integrated circuits routinely require 3-dB optical power dividers with minimal losses, small footprints, ultra-wide bandwidths, and relaxed manufacturing tolerances to distribute light across the chip and as a key building block to form more complex devices. Symmetric Y-junctions stand out among other power splitting devices owing to their wavelength-independent response and a straightforward design. Yet, the limited resolution of current fabrication methods results in a minimum feature size (MFS) at the tip between the two Y-junction arms that leads to significant losses for …
We explore broadband, wide-angle mid-infrared rectification based on nanopatterned hyperbolic metamaterials (HMM), composed of two dissimilar metals separated by a sub-nanometer tunnel barrier. The exotic slow-light modes supported by such periodically trenched HMMs efficiently trap incident radiation in massively parallel metal-insulator-metal tunnel junctions supporting ultrafast optical rectification induced by photon-assisted tunneling. This leads to highly efficient photon-to-electron conversion, orders of magnitude larger than conventional rectennas. Our results promise an impact on infr…
