Solar filaments are dark structures on the solar disk, with an elongated spine and several barbs extending out from the spine. When appearing above the solar limb, a filament is called a prominence, with several feet extending down to the solar surface. It was generally thought that filament barbs are simply the prominence feet veering away from the spine and down to the solar surface. However, it was recently noticed that there might be another dynamic type of barbs, which were proposed to be due to filament thread longitudinal oscillation. If this is the case, the dynamic barbs would not extend down to the solar surface. With the quadrature observations of a filament barb on 2011 June 5 from the {\it Solar Dynamics Observatory} and the {\it STEREO} satellites, we confirm that the filament barb is due to filament thread longitudinal oscillations. Viewed from the side, the filament barb looks like an appendix along the spine of the prominence, and does not extend down to the solar surface as a foot.
Recent high-resolution and high-cadence observations have surprisingly suggested that prominence barbs exhibit apparent rotating motions suggestive of a tornado-like structure. Additional evidence has been provided by Doppler measurements. The observations reveal opposite velocities for both hot and cool plasma on the two sides of a prominence barb. This motion is persistent for several hours and has been interpreted in terms of rotational motion of prominence feet. Several authors suggest that such barb motions are rotating helical structures around a vertical axis similar to tornadoes on Ear…
Recent high-resolution observations from the Solar Dynamics Observatory (SDO) have reawakened interest in the old and fascinating phenomenon of solar tornado-like prominences. This class of prominences was first introduced by Pettit (1932), who studied them over many years. Observations of tornado prominences similar to the ones seen by SDO had already been documented by Secchi (1877) in his famous "Le Soleil". High resolution and high cadence multiwavelength data obtained by SDO reveal that the tornado-like appearance of these prominences is mainly an illusion due to projection effects. We di…
Bubbles, the semi-circular voids below quiescent prominences (filaments), have been extensively investigated in the past decade. However, hitherto the magnetic nature of bubbles cannot be verified due to the lack of on-disk photospheric magnetic field observations. Here for the first time, we find and investigate an on-disk prominence bubble around a filament barb on 2019 March 18 based on stereoscopic observations from NVST, SDO, and STEREO-A. In high-resolution NVST H$α$ images, this bubble has a sharp arch-like boundary and a projected width of $\thicksim$26 Mm. Combining SDO and STEREO-A i…
We study nonlinear waves in a prominence foot using 2.5D MHD model motivated by recent high-resolution observations with Hinode/SOT in Ca~II emission of a prominence on October 10, 2012 showing highly dynamic small-scale motions in the prominence material. Observations of H$α$ intensities and of Doppler shifts show similar propagating fluctuations. However the optically thick nature of the emission lines inhibits unique quantitative interpretation in terms of density. Nevertheless, we find evidence of nonlinear wave activity in the prominence foot by examining the relative magnitude of the flu…
We attempt to propose a method for automatically detecting the solar filament chirality and barb bearing. We first introduce the unweighted undirected graph concept and adopt the Dijkstra shortest-path algorithm to recognize the filament spine. Then, we use the polarity inversion line (PIL) shift method for measuring the polarities on both sides of the filament, and employ the connected components labeling method to identify the barbs and calculate the angle between each barb and the spine to determine the bearing of the barbs, i.e., left or right. We test the automatic detection method with H…
We study recent observations of propagating fluctuations in a prominence foot with Hinode Solar Optical Telescope (SOT) high-resolution observations in Ca~II and H alpha emission which we identify as nonlinear fast magnetosnic waves. Here we analyze further the observations of propagating waves and flows with Interface Region Imaging Spectrograph (IRIS) Mg~II slit jaw images, in addition to Hinode/SOT Ca~II images. We find that the waves have typical periods in the range of 5 - 11 minutes and wavelengths in the plane of the sky (POS) of about 2000 km, while the flows in narrow threads have typ…
We present high-resolution observations of a quiescent solar prominence which was consisted of a vertical and a horizontal foot encircled by an overlying spine, and counter-streaming mass flows were ubiquitous in the prominence. While the horizontal foot and the spine were connecting to the solar surface, the vertical foot was suspended above the solar surface and supported by a semicircular bubble structure. The bubble first collapsed and then reformed at a similar height, finally, it started to oscillate for a long time. We find that the collapsing and oscillation of the bubble boundary were…
Although the real shapes and trajectories of erupting solar prominences in three dimensions have been intensively studied, the three-dimensional (3D) shapes of stable prominences before eruptions have not been measured accurately so far. We intend to make such a measurement to constrain 3D prominence models and to extend our knowledge of prominences. Using multiperspective observations from the Atmospheric Imaging Assembly on board SDO and the Extreme Ultraviolet Imager on board STEREO, we reconstructed 3D coordinates of three stable prominences: a quiescent, an intermediate, and a mixed type.…
Prominences in the solar corona are hundredfold cooler and denser than their surroundings, with a total mass of 1.e13 up to 1.e15 g. Here we report on the first comprehensive simulations of three-dimensional, thermally and gravitationally stratified magnetic flux ropes, where in situ condensation to a prominence happens due to radiative losses. After a gradual thermodynamic adjustment, we witness a phase where runaway cooling happens while counter-streaming shearing flows drain off mass along helical field lines. After this drainage, a prominence-like condensation resides in concave upward fie…
Solar tornadoes are dark vertical filamentary structures observed in the extreme ultraviolet associated with prominence legs and filament barbs. Their true nature and relationship to prominences requires understanding their magnetic structure and dynamic properties. Recently, a controversy has arisen: is the magnetic field organized forming vertical, helical structures or is it dominantly horizontal? And concerning their dynamics, are tornadoes really rotating or is it just a visual illusion? Here, we analyze four consecutive spectropolarimetric scans of a prominence hosting tornadoes on its l…
An X5.4 class flare occurred in active region (AR) NOAA11429 on 2012 March 7. The flare was associated with very fast coronal mass ejection (CME) with its velocity of over 2500 km/s. In the images taken with STEREO-B/COR1, a dome-like disturbance was seen to detach from expanding CME bubble and propagated further. A Type-II radio burst was also observed at the same time. On the other hand, in EUV images obtained by SDO/AIA, expanding dome-like structure and its foot print propagating to the north were observed. The foot print propagated with its average speed of about 670 km/s and hit a promin…
We analyze the characteristics of a quiescent polar prominence using the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO). Initially, small-scale barb-like structures are evident on the solar disk, which firstly grow vertically and thereafter move towards the south-west limb. Later, a spine connects these barbs and we observe apparent rotating motions in the upper part of the prominence. These apparent rotating motions might play an important role for the evolution and growth of the filament by transferring cool plasma and magnetic twist. The large-scale vortex m…
The interiors of quiescent prominences are filled with turbulent flows. The evolution of upflow plumes, descending pillars, and vortex motions has been clearly detected in high-resolution observations. The Rayleigh-Taylor instability is thought to be a driver of such internal flows. Descending pillars are related to the mass budgets of prominences. There is a hypothesis of dynamic equilibrium where the mass drainage via descending pillars and the mass supply via radiative condensation are balanced to maintain the prominence mass; however, the background physics connecting the two different pro…
We report an unusual set of observations of waves in a large prominence pillar which consist of pulses propagating perpendicular to the prominence magnetic field. We observe a huge quiescent prominence with the Solar Dynamics Observatory (SDO) Atmospheric Imaging Assembly (AIA) in EUV on 2012 October 10 and only a part of it, the pillar, which is a foot or barb of the prominence, with the Hinode Solar Optical Telescope (SOT) (in Ca II and Hαlines), Sac Peak (in Hα, Hβ and Na-D lines), THEMIS ("Télescope Héliographique pour l' Etude du Magnétisme et des Instabilités Solaires") with the MTR (Mul…
Su et al. 2012 proposed a new explanation for filament formation and eruption, where filament barbs are rotating magnetic structures driven by underlying vortices on the surface. Such structures have been noticed as tornado-like prominences when they appear above the limb. They may play a key role as the source of plasma and twist in filaments. However, no observations have successfully distinguished rotational motion of the magnetic structures in tornado-like prominences from other motions such as oscillation and counter-streaming plasma flows. Here we report evidence of rotational motions in…
Context. Plasma inflows accompany a variety of processes in the solar atmosphere such as heating of coronal loops and formation of prominences. Aims. We model a stratified solar atmosphere, within which a simulated prominence thread experiences density accumulation via a plasma inflow designed to mimic the formation process. We aim to investigate the interaction of such a system with torsional perturbations, and the possible consequences. Methods. The linearised equations of motion and induction are integrated to analyse the spatial and temporal evolution of torsional perturbations that are ra…
To understand the formation of quiescent solar prominences, the origin of their magnetic field structures, i.e., magnetic flux ropes (MFRs), must be revealed. We use three-dimensional magnetofriction simulations in a spherical subdomain to investigate the role of typical supergranular motions in the long-term formation of a prominence magnetic field. Time-dependant horizontal supergranular motions with and without the effect of Coriolis force are simulated on the solar surface via Voronoi tessellation. The vortical motions by the Coriolis effect at boundaries of supergranules inject magnetic h…
As one of the most common features in the solar atmosphere, filaments are significant not only in the solar physics but also in the stellar and laboratory plasma physics. With the New Vacuum Solar Telescope and the Solar Dynamics Observatory, here we report on multi-wavelength observations of eruptions of a small (30\arcsec) filament (SF) and its consequences while interacting with the ambient magnetic features including a large (300\arcsec) filament (LF). The eruptions of the SF drive a two-side-loop jet that is a result of magnetic reconnection between the SF threads and an over-lying magnet…
With this study, we aim to understand the nature of prominences, governed by their formation process. We use a state-of-the-art threaded prominence model within a dipped magnetic arcade. The non-ideal magnetohydrodynamic (MHD) equations are solved using the open-source MPI-AMRVAC MHD toolkit. Unlike many previous 1D models, we study the full 2D dynamics in a fixed-shaped arcade. This allows for sideways field deformations and cross-field thermodynamic coupling. To achieve a realistic setup we consider field-aligned thermal conduction, radiative cooling and heating, wherein the latter combines …
We investigate triggering, activation, and ejection of a solar eruptive prominence that occurred in a multi-polar flux system of active region NOAA 11548 on 2012 August 18 by analyzing data from AIA on board SDO, RHESSI, and EUVI/SECCHI on board STEREO. Prior to the prominence activation, we observed striking coronal activities in the form of a blowout jet which is associated with rapid eruption of a cool flux rope. Further, the jet-associated flux rope eruption underwent splitting and rotation during its outward expansion. These coronal activities are followed by the prominence activation dur…
We propose an in-situ formation model for inverse-polarity solar prominence and demonstrate it using self-consistent 2.5-dimensional magnetohydrodynamics simulations, including thermal conduction along magnetic fields and optically thin radiative cooling. The model enables us to form cool dense plasma clouds inside a flux rope by radiative condensation, which is regarded as an inverse-polarity prominence. Radiative condensation is triggered by changes in the magnetic topology, i.e., formation of the flux rope from the sheared arcade field, and by thermal imbalance due to the dense plasma trapp…
High-resolution observations from the $Interface~Region~Imaging~Spectrometer$ ($IRIS$) reveal the existence of a particular type of small solar jets, which arose singly or in clusters from a tornado-like prominence suspended in the corona. In this study, we perform a detailed statistical analysis of 43 selected mini-jets in the tornado event. Our results show that the mini-jets typically have: (1) a projected length of 1.0-6.0 Mm, (2) a width of 0.2-1.0 Mm, (3) a lifetime of 10-50 s, (4) a velocity of 100-350 km s$^{-1}$, and (5) an acceleration of 3-20 km s$^{-2}$. Based on spectral diagnosti…
Quiescent solar prominence fine structures are typically modelled as density enhancements, called threads, which occupy a fraction of a longer magnetic flux tube. The profile of the mass density along the magnetic field is however unknown and several arbitrary alternatives are employed in prominence wave studies. We present a comparison of theoretical models for the field-aligned density along prominence fine structures. We consider Lorentzian, Gaussian, and parabolic profiles. We compare their theoretical predictions for the period ratio between the fundamental transverse kink mode and the fi…
We present results of 3-D numerical simulations of a fast magnetic twister excited above a foot-point of the potential solar coronal arcade that is embedded in the solar atmosphere with the initial VAL-IIIC temperature profile, which is smoothly extended into the solar corona. With the use of the FLASH code, we solve 3-D ideal magnetohydrodynamic equations by specifying a twist in the azimuthal component of magnetic field in the solar chromosphere. The imposed perturbation generates torsional Alfvén waves as well as plasma swirls that reach the other foot-point of the arcade and partially refl…
Prominence threads are dense and cold structures lying on curved magnetic fields that can be suspended in the solar atmosphere against gravity. The gravitational stability of threads, in the absence of non-ideal effects, is comprehensively investigated in the present work by means of an elementary but effective model. Based on purely hydrodynamic equations in one spatial dimension and applying line-tying conditions at the footpoints of the magnetic field lines, we derive analytical expressions for the different feasible equilibria and the corresponding frequencies of oscillation. We find that …
The barbs or legs of some prominences show an apparent motion of rotation, which are often termed solar tornadoes. It is under debate whether the apparent motion is a real rotating motion, or caused by oscillations or counter-streaming flows. We present analysis results from spectroscopic observations of two tornadoes by the Interface Region Imaging Spectrograph. Each tornado was observed for more than 2.5 hours. Doppler velocities are derived through a single Gaussian fit to the Mg~{\sc{ii}}~k~2796Å~and Si~{\sc{iv}}~1393Å~line profiles. We find coherent and stable red and blue shifts adjacent…
