Curved Buildings Reconstruction from Airborne LiDAR Data by Matching and Deforming Geometric Primitives
University of Technology, Sydney（悉尼科技大学）；University of Calgary（卡尔加里大学）；Institute of Remote Sensing and Digital Earth, Chinese Academy of Sciences（中国科学院遥感与数字地球研究所）；University of Chinese Academy of Sciences（中国科学院大学）；College of Civil Engineering, Nanjing Forestry University（南京林业大学土木工程学院）
Airborne LiDAR (Light Detection and Ranging) data is widely applied in building reconstruction, with studies reporting success in typical buildings. However, the reconstruction of curved buildings remains an open research problem. To this end, we propose a new framework for curved building reconstruction via assembling and deforming geometric primitives. The input LiDAR point cloud are first converted into contours where individual buildings are identified. After recognizing geometric units (primitives) from building contours, we get initial models by matching basic geometric primitives to these primitives. To polish assembly models, we employ a warping field for model refinements. Specifically, an embedded deformation (ED) graph is constructed via downsampling the initial model. Then, the point-to-model displacements are minimized by adjusting node parameters in the ED graph based on our objective function. The presented framework is validated on several highly curved buildings collected by various LiDAR in different cities. The experimental results, as well as accuracy comparison, demonstrate the advantage and effectiveness of our method. {The new insight attributes to an efficient reconstruction manner.} Moreover, we prove that the primitive-based framework significantly reduces the data storage to 10-20 percent of classical mesh models.
LASTIG, Univ. Gustave Eiffel, IGN-ENSG（古斯塔夫·埃菲尔大学LASTIG实验室，法国国家地理与林业信息学院）；INRAE, UMR 1202 BIOGECO, Université de Bordeaux（法国国家农业食品与环境研究院，波尔多大学生物地球化学与生态学联合研究中心）；EA G&E Bordeaux INP, Université Bordeaux Montaigne（波尔多蒙田大学，波尔多国立高等电子、计算机、电信、数学与机械学院环境与地理空间工程研究团队）
We propose a new deep learning-based method for estimating the occupancy of vegetation strata from airborne 3D LiDAR point clouds. Our model predicts rasterized occupancy maps for three vegetation strata corresponding to lower, medium, and higher cover. Our weakly-supervised training scheme allows our network to only be supervised with vegetation occupancy values aggregated over cylindrical plots containing thousands of points. Such ground truth is easier to produce than pixel-wise or point-wise annotations. Our method outperforms handcrafted and deep learning baselines in terms of precision b…
The motivation of this paper is to address the problem of registering airborne LiDAR data and optical aerial or satellite imagery acquired from different platforms, at different times, with different points of view and levels of detail. In this paper, we present a robust registration method based on building regions, which are extracted from optical images using mean shift segmentation, and from LiDAR data using a 3D point cloud filtering process. The matching of the extracted building segments is then carried out using Graph Transformation Matching (GTM) which allows to determine a common pat…
Aerospace Information Research Institute, Chinese Academy of Sciences（中国科学院空天信息创新研究院）；University of Chinese Academy of Sciences（中国科学院大学）；Tandon School of Engineering, New York University（纽约大学坦登工程学院）
Airborne light detection and ranging (LiDAR) plays an increasingly significant role in urban planning, topographic mapping, environmental monitoring, power line detection and other fields thanks to its capability to quickly acquire large-scale and high-precision ground information. To achieve point cloud classification, previous studies proposed point cloud deep learning models that can directly process raw point clouds based on PointNet-like architectures. And some recent works proposed graph convolution neural network based on the inherent topology of point clouds. However, the above point c…
We present a fully automatic approach for reconstructing compact 3D building models from large-scale airborne point clouds. A major challenge of urban reconstruction from airborne LiDAR point clouds lies in that the vertical walls are typically missing. Based on the observation that urban buildings typically consist of planar roofs connected with vertical walls to the ground, we propose an approach to infer the vertical walls directly from the data. With the planar segments of both roofs and walls, we hypothesize the faces of the building surface, and the final model is obtained by using an ex…
Institute of Remote Sensing and Digital Earth, Chinese Academy of Sciences（中国科学院遥感与数字地球研究所）；University of Chinese Academy of Sciences（中国科学院大学）；Tandon School of Engineering, New York University（纽约大学坦登工程学院）
Point cloud classification plays an important role in a wide range of airborne light detection and ranging (LiDAR) applications, such as topographic mapping, forest monitoring, power line detection, and road detection. However, due to the sensor noise, high redundancy, incompleteness, and complexity of airborne LiDAR systems, point cloud classification is challenging. In this paper, we proposed a directionally constrained fully convolutional neural network (D-FCN) that can take the original 3D coordinates and LiDAR intensity as input; thus, it can directly apply to unstructured 3D point clouds…
Universitat de Barcelona（巴塞罗那大学）；Institut Cartogràfic i Geològic de Catalunya（加泰罗尼亚制图与地质研究所）
Airborne topographic LiDAR is an active remote sensing technology that emits near-infrared light to map objects on the Earth's surface. Derived products of LiDAR are suitable to service a wide range of applications because of their rich three-dimensional spatial information and their capacity to obtain multiple returns. However, processing point cloud data still requires a significant effort in manual editing. Certain human-made objects are difficult to detect because of their variety of shapes, irregularly-distributed point clouds, and low number of class samples. In this work, we propose an …
Constructing a point cloud for a large geographic region, such as a state or country, can require multiple years of effort. Often several vendors will be used to acquire LiDAR data, and a single region may be captured by multiple LiDAR scans. A key challenge is maintaining consistency between these scans, which includes point density, number of returns, and intensity. Intensity in particular can be very different between scans, even in areas that are overlapping. Harmonizing the intensity between scans to remove these discrepancies is expensive and time consuming. In this paper, we propose a n…
The purpose of this study was to investigate the use of deep learning for coniferous/deciduous classification of individual trees from airborne LiDAR data. To enable efficient processing by a deep convolutional neural network (CNN), we designed two discrete representations using leaf-off and leaf-on LiDAR data: a digital surface model with four channels (DSMx4) and a set of four 2D views (4x2D). A training dataset of labeled tree crowns was generated via segmentation of tree crowns, followed by co-registration with field data. Potential mislabels due to GPS error or tree leaning were corrected…
Forest canopy height estimation from satellite RGB imagery using large-scale airborne LiDAR-derived training data and monocular depth estimation
Beijing Normal University（北京师范大学）；CSIRO Environment（英联邦科学与工业研究组织环境部）；Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences（中国科学院深圳先进技术研究院）；Wuhan University（武汉大学）；Aerospace Information Research Institute, Chinese Academy of Sciences（中国科学院空天信息创新研究院）
University of Cambridge（剑桥大学）；Fondazione E. Mach（埃马努埃莱·马赫基金会）；University of Oxford（牛津大学）；The University of Queensland（昆士兰大学）；Natural England（英国自然署）
Recognising individual trees within remotely sensed imagery has important applications in forest ecology and management. Several algorithms for tree delineation have been suggested, mostly based on locating local maxima or inverted basins in raster canopy height models (CHMs) derived from Light Detection And Ranging (LiDAR) data or photographs. However, these algorithms often lead to inaccurate estimates of forest stand characteristics due to the limited information content of raster CHMs. Here we develop a 3D tree delineation method which uses graph cut to delineate trees from the full 3D LiD…
This paper presents a non-parametric approach for segmenting trees from airborne LiDAR data in deciduous forests. Based on the LiDAR point cloud, the approach collects crown information such as steepness and height on-the-fly to delineate crown boundaries, and most importantly, does not require a priori assumptions of crown shape and size. The approach segments trees iteratively starting from the tallest within a given area to the smallest until all trees have been segmented. To evaluate its performance, the approach was applied to the University of Kentucky Robinson Forest, a deciduous closed…
International Institute of Information Technology Bangalore（班加罗尔国际信息技术学院）
LiDAR point clouds provide rich geometric information, which is particularly useful for the analysis of complex scenes of urban regions. Finding structural and semantic differences between two different three-dimensional point clouds, say, of the same region but acquired at different time instances is an important problem. A comparison of point clouds involves computationally expensive registration and segmentation. We are interested in capturing the relative differences in the geometric uncertainty and semantic content of the point cloud without the registration process. Hence, we propose an …
Classification of Single Tree Decay Stages from Combined Airborne LiDAR Data and CIR Imagery
The Hong Kong Polytechnic University（香港理工大学）；The Hong Kong Polytechnic University Shenzhen Research Institute（香港理工大学深圳研究院）；Bavarian Forest National Park（巴伐利亚森林国家公园）；University of Freiburg（弗莱堡大学）；Inland Norway University of Applied Sciences（挪威内陆应用科学大学）
Airborne LiDAR point cloud representing a forest contains 3D data, from which vertical stand structure even of understory layers can be derived. This paper presents a tree segmentation approach for multi-story stands that stratifies the point cloud to canopy layers and segments individual tree crowns within each layer using a digital surface model based tree segmentation method. The novelty of the approach is the stratification procedure that separates the point cloud to an overstory and multiple understory tree canopy layers by analyzing vertical distributions of LiDAR points within overlappi…
New York University（纽约大学）；Tandon School of Engineering, New York University（纽约大学坦登工程学院）；Aerospace Information Research Institute, Chinese Academy of Sciences（中国科学院空天信息创新研究院）
To better address challenging issues of the irregularity and inhomogeneity inherently present in 3D point clouds, researchers have been shifting their focus from the design of hand-craft point feature towards the learning of 3D point signatures using deep neural networks for 3D point cloud classification. Recent proposed deep learning based point cloud classification methods either apply 2D CNN on projected feature images or apply 1D convolutional layers directly on raw point sets. These methods cannot adequately recognize fine-grained local structures caused by the uneven density distribution…
Airborne discrete return light detection and ranging (LiDAR) point clouds covering forested areas can be processed to segment individual trees and retrieve their morphological attributes. Segmenting individual trees in natural deciduous forests however remained a challenge because of the complex and multi-layered canopy. In this chapter, we present (i) a robust segmentation method that avoids a priori assumptions about the canopy structure, (ii) a vertical canopy stratification procedure that improves segmentation of understory trees, (iii) an occlusion model for estimating the point density o…
This paper addresses the task of separating ground points from airborne LiDAR point cloud data in urban areas. A novel ground filtering method using scan line segmentation is proposed here, which we call SLSGF. It utilizes the scan line information in LiDAR data to segment the LiDAR data. The similarity measurements are designed to make it possible to segment complex roof structures into a single segment as much as possible so the topological relationships between the roof and the ground are simpler, which will benefit the labeling process. In the labeling process, the initial ground segments …
Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室）；North Carolina State University（北卡罗来纳州立大学）；Routescene Inc.（Routescene公司）
In airborne light detection and ranging (LiDAR) systems, misalignments between the LiDAR-scanner and the inertial navigation system (INS) mounted on an unmanned aerial vehicle (UAV)'s frame can lead to inaccurate 3D point clouds. Determining the orientation offset, or boresight error is key to many LiDAR-based applications. In this work, we introduce a mixed-integer quadratically constrained quadratic program (MIQCQP) that can globally solve this misalignment problem. We also propose a nested spatial branch and bound (nsBB) algorithm that improves computational performance. The nsBB relies on …
Airborne laser scanning (LiDAR) point clouds over large forested areas can be processed to segment individual trees and subsequently extract tree-level information. Existing segmentation procedures typically detect more than 90% of overstory trees, yet they barely detect 60% of understory trees because of the occlusion effect of higher canopy layers. Although understory trees provide limited financial value, they are an essential component of ecosystem functioning by offering habitat for numerous wildlife species and influencing stand development. Here we model the occlusion effect in terms of…
Leddar PixSet is a new publicly available dataset (dataset.leddartech.com) for autonomous driving research and development. One key novelty of this dataset is the presence of full-waveform data from the Leddar Pixell sensor, a solid-state flash LiDAR. Full-waveform data has been shown to improve the performance of perception algorithms in airborne applications but is yet to be demonstrated for terrestrial applications such as autonomous driving. The PixSet dataset contains approximately 29k frames from 97 sequences recorded in high-density urban areas, using a set of various sensors (cameras, …
Reconstructing the underlying 3D surface of an object from a single image is a challenging problem that has received extensive attention from the computer vision community. Many learning-based approaches tackle this problem by learning a 3D shape prior from either ground truth 3D data or multi-view observations. To achieve state-of-the-art results, these methods assume that the objects are specified with respect to a fixed canonical coordinate frame, where instances of the same category are perfectly aligned. In this work, we present a new method for joint category-specific 3D reconstruction a…
There is much current interest in using multi-sensor airborne remote sensing to monitor the structure and biodiversity of forests. This paper addresses the application of non-parametric image registration techniques to precisely align images obtained from multimodal imaging, which is critical for the successful identification of individual trees using object recognition approaches. Non-parametric image registration, in particular the technique of optimizing one objective function containing data fidelity and regularization terms, provides flexible algorithms for image registration. Using a sur…
University of Copenhagen（哥本哈根大学）；University of Münster（明斯特大学）
Quantification of forest biomass stocks and their dynamics is important for implementing effective climate change mitigation measures. The knowledge is needed, e.g., for local forest management, studying the processes driving af-, re-, and deforestation, and can improve the accuracy of carbon-accounting. Remote sensing using airborne LiDAR can be used to perform these measurements of vegetation structure at large scale. We present deep learning systems for predicting wood volume, above-ground biomass (AGB), and subsequently above-ground carbon stocks directly from airborne LiDAR point clouds. …
Université Gustave Eiffel, IGN-ENSG, LASTIG（古斯塔夫·埃菲尔大学，法国国家地理与林业信息研究所-国家地理科学学院，地理信息与空间分析实验室）；INRAE, UMR 1202 BIOGECO, Université de Bordeaux（法国国家农业食品与环境研究院，BIOGECO联合研究单位，波尔多大学）；EA G&E Bordeaux INP, Université Bordeaux Montaigne（波尔多综合理工学院G&E研究组，波尔多蒙田大学）
We propose a new deep learning-based method for estimating the occupancy of vegetation strata from 3D point clouds captured from an aerial platform. Our model predicts rasterized occupancy maps for three vegetation strata: lower, medium, and higher strata. Our training scheme allows our network to only being supervized with values aggregated over cylindrical plots, which are easier to produce than pixel-wise or point-wise annotations. Our method outperforms handcrafted and deep learning baselines in terms of precision while simultaneously providing visual and interpretable predictions. We prov…
Building change detection is essential for monitoring urbanization, disaster assessment, urban planning and frequently updating the maps. 3D structure information from airborne light detection and ranging (LiDAR) is very effective for detecting urban changes. But the 3D point cloud from airborne LiDAR(ALS) holds an enormous amount of unordered and irregularly sparse information. Handling such data is tricky and consumes large memory for processing. Most of this information is not necessary when we are looking for a particular type of urban change. In this study, we propose an automatic method …
Minkowski-MambaNet: A Point Cloud Framework with Selective State Space Models for Forest Biomass Quantification
School of Computer Science and Technology, the Key Laboratory of Signal Detection and Processing, and the Xinjiang Multimodal Intelligent Processing and Information Security Engineering Technology Research Center, Xinjiang University（计算机科学与技术学院、信号检测与处理重点实验室以及新疆多模态智能处理与信息安全工程技术研究中心，新疆大学）；National Key Laboratory for Novel Software Technology, Nanjing University（新型软件技术国家实验室，南京大学）；Xinjiang Guanghui New Energy Co., Ltd（新疆广汇新能源有限公司）；Hongyousoft Co., Ltd（宏远软件有限公司）
Super-Resolution of Airborne Laser Scanning Point Clouds for Forest Inventory
Department of Forestry and Natural Resources, Purdue University（林业与自然资源系，普渡大学）；Lyles School of Civil and Construction Engineering, Purdue University（莱尔斯土木与建设工程学院，普渡大学）
本文提出3D Forest Super Resolution模型，通过提升点云密度和减少噪声，提高森林调查精度，实验表明其在树干定位和直径估计上表现优异。
University of Missouri（密苏里大学）；University of Michigan（密歇根大学）；University of Florida（佛罗里达大学）
In remote sensing, each sensor can provide complementary or reinforcing information. It is valuable to fuse outputs from multiple sensors to boost overall performance. Previous supervised fusion methods often require accurate labels for each pixel in the training data. However, in many remote sensing applications, pixel-level labels are difficult or infeasible to obtain. In addition, outputs from multiple sensors often have different resolution or modalities. For example, rasterized hyperspectral imagery presents data in a pixel grid while airborne Light Detection and Ranging (LiDAR) generates…
Applications based on synergistic integration of optical imagery and LiDAR data are receiving a growing interest from the remote sensing community. However, a misaligned integration between these datasets may fail to fully profit the potential of both sensors. In this regard, an optimum fusion of optical imagery and LiDAR data requires an accurate registration. This is a complex problem since a versatile solution is still missing, especially when considering the context where data are collected at different times, from different platforms, under different acquisition configurations. This paper…
The Hong Kong Polytechnic University（香港理工大学）；The Hong Kong Polytechnic University Shenzhen Research Institute（香港理工大学深圳研究院）；Nanjing Forestry University（南京林业大学）
Forest land plays a vital role in global climate, ecosystems, farming and human living environments. Therefore, forest biomass estimation methods are necessary to monitor changes in the forest structure and function, which are key data in natural resources research. Although accurate forest biomass measurements are important in forest inventory and assessments, high-density measurements that involve airborne light detection and ranging (LiDAR) at a low flight height in large mountainous areas are highly expensive. The objective of this study was to quantify the aboveground biomass (AGB) of a p…
NormalView: tree species classification from backpack and aerial lidar data using geometric projections
Finnish Geospatial Research Institute FGI（芬兰地理研究 institute FGI）；The National Land Survey of Finland（芬兰国家土地调查局）；Department of Remote Sensing and Photogrammetry（遥感与摄影测量系）；Department of Built Environment, School of Engineering（环境系，工程学院）
With the objective of improving the registration of LiDAR point clouds produced by kinematic scanning systems, we propose a novel trajectory adjustment procedure that leverages on the automated extraction of selected reliable 3D point--to--point correspondences between overlapping point clouds and their joint integration (adjustment) together with all raw inertial and GNSS observations. This is performed in a tightly coupled fashion using a Dynamic Network approach that results in an optimally compensated trajectory through modeling of errors at the sensor, rather than the trajectory, level. T…
Automatic extraction of buildings in urban scenes has become a subject of growing interest in the domain of photogrammetry and remote sensing, particularly with the emergence of LiDAR systems since mid-1990s. However, in reality, this task is still very challenging due to the complexity of building size and shapes, as well as its surrounding environment. Active contour model, colloquially called snake model, which has been extensively used in many applications in computer vision and image processing, is also applied to extract buildings from aerial/satellite imagery. Motivated by the limitatio…
A Lightweight Model-Driven 4D Radar Framework for Pervasive Human Detection in Harsh Conditions
Mechanical \& Mechatronics Engineering University of Waterloo Waterloo, Canada；Electrical \& Computer Engineering University of Waterloo Waterloo, Canada
Enhancing Monocular Height Estimation via Sparse LiDAR-Guided Correction
Graduate School of Frontier Sciences, The University of Tokyo（东京大学前沿科学研究生院）；RIKEN Center for Advanced Intelligence Project (AIP), RIKEN（日本理化学研究所先进智能项目中心（AIP））
Geosciences Rennes, Université Rennes 1, CNRS（法国国家科学研究中心雷恩第一大学雷恩地球科学研究所）；University of Canterbury（坎特伯雷大学）
3D point clouds of natural environments relevant to problems in geomorphology often require classification of the data into elementary relevant classes. A typical example is the separation of riparian vegetation from ground in fluvial environments, the distinction between fresh surfaces and rockfall in cliff environments, or more generally the classification of surfaces according to their morphology. Natural surfaces are heterogeneous and their distinctive properties are seldom defined at a unique scale, prompting the use of multi-scale criteria to achieve a high degree of classification succe…
APCoTTA: Continual Test-Time Adaptation for Semantic Segmentation of Airborne LiDAR Point Clouds
Aerospace Information Research Institute, Chinese Academy of Sciences（中国科学院航空航天信息研究所）；International Research Center of Big Data for Sustainable Development Goals（可持续发展目标大数据国际研究中心）；University of Chinese Academy of Sciences（中国科学院大学）；The Department of Geomatics Engineering, Changsha University of Science and Technology（长沙理工大学测绘工程系）；The State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University（武汉大学测绘遥感信息工程国家重点实验室）
