Rapid and reliable robot bin picking is a critical challenge in automating warehouses, often measured in picks-per-hour (PPH). We explore increasing PPH using faster motions based on optimizing over a set of candidate grasps. The source of this set of grasps is two-fold: (1) grasp-analysis tools such as Dex-Net generate multiple candidate grasps, and (2) each of these grasps has a degree of freedom about which a robot gripper can rotate. In this paper, we present Grasp-Optimized Motion Planning (GOMP), an algorithm that speeds up the execution of a bin-picking robot's operations by incorporating robot dynamics and a set of candidate grasps produced by a grasp planner into an optimizing motion planner. We compute motions by optimizing with sequential quadratic programming (SQP) and iteratively updating trust regions to account for the non-convex nature of the problem. In our formulation, we constrain the motion to remain within the mechanical limits of the robot while avoiding obstacles. We further convert the problem to a time-minimization by repeatedly shorting a time horizon of a trajectory until the SQP is infeasible. In experiments with a UR5, GOMP achieves a speedup of 9x over a baseline planner.
Suction cup grasping is very common in industry, but moving too quickly can cause suction cups to detach, causing drops or damage. Maintaining a suction grasp throughout a high-speed motion requires balancing suction forces against inertial forces while the suction cups deform under strain. In this paper, we consider Grasp Optimized Motion Planning for Suction Transport (GOMP-ST), an algorithm that combines deep learning with optimization to decrease transport time while avoiding suction cup failure. GOMP-ST first repeatedly moves a physical robot, vacuum gripper, and a sample object, while me…
High-speed motions in pick-and-place operations are critical to making robots cost-effective in many automation scenarios, from warehouses and manufacturing to hospitals and homes. However, motions can be too fast -- such as when the object being transported has an open-top, is fragile, or both. One way to avoid spills or damage, is to move the arm slowly. We propose an alternative: Grasp-Optimized Motion Planning for Fast Inertial Transport (GOMP-FIT), a time-optimizing motion planner based on our prior work, that includes constraints based on accelerations at the robot end-effector. With GOM…
Delft University of Technology（代尔夫特理工大学）；Delft Robotics, B.V.（代尔夫特机器人有限公司）
This paper describes Team Delft's robot, which won the Amazon Picking Challenge 2016, including both the Picking and the Stowing competitions. The goal of the challenge is to automate pick and place operations in unstructured environments, specifically the shelves in an Amazon warehouse. Team Delft's robot is based on an industrial robot arm, 3D cameras and a customized gripper. The robot's software uses ROS to integrate off-the-shelf components and modules developed specifically for the competition, implementing Deep Learning and other AI techniques for object recognition and pose estimation,…
Bosch Center for Artificial Intelligence（博世人工智能中心）；Technical University of Berlin（柏林工业大学）；RWTH Aachen University（亚琛工业大学）
Automated bin-picking is a prerequisite for fully automated manufacturing and warehouses. To successfully pick an item from an unstructured bin the robot needs to first detect possible grasps for the objects, decide on the object to remove and consequently plan and execute a feasible trajectory to retrieve the chosen object. Over the last years significant progress has been made towards solving these problems. However, when multiple robot arms are cooperating the decision and planning problems become exponentially harder. We propose an integrated multi-arm bin-picking pipeline (IMAPIP), and de…
School of Electrical Engineering and Computer Science, Queensland University of Technology（昆士兰科技大学电气工程与计算机科学学院）
In this paper, we present the lessons learnt during the development of a new robotic harvester (Harvey) that can autonomously harvest sweet pepper (capsicum) in protected cropping environments. Robotic harvesting offers an attractive potential solution to reducing labour costs while enabling more regular and selective harvesting, optimising crop quality, scheduling and therefore profit. Our approach combines effective vision algorithms with a novel end-effector design to enable successful harvesting of sweet peppers. We demonstrate a simple and effective vision-based algorithm for crop detecti…
Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；School of Artificial Intelligence, University of Chinese Academy of Sciences（中国科学院大学人工智能学院）；Centre for Artificial Intelligence and Robotics, Hong Kong Institute of Science and Innovation, Chinese Academy of Sciences（中国科学院香港创新研究院人工智能与机器人中心）
Object picking in cluttered scenes is a widely investigated field of robot manipulation, however, ambidextrous robot picking is still an important and challenging issue. We found the fusion of different prehensile actions (grasp and suction) can expand the range of objects that can be picked by robot, and the fusion of prehensile action and nonprehensile action (push) can expand the picking space of ambidextrous robot. In this paper, we propose a Push-Grasp-Suction (PGS) tri-mode grasping learning network for ambidextrous robot picking through the fusion of different prehensile actions and the…
Australian Centre for Robotic Vision（澳大利亚机器人视觉中心）；Queensland University of Technology（昆士兰科技大学）
Camera viewpoint selection is an important aspect of visual grasp detection, especially in clutter where many occlusions are present. Where other approaches use a static camera position or fixed data collection routines, our Multi-View Picking (MVP) controller uses an active perception approach to choose informative viewpoints based directly on a distribution of grasp pose estimates in real time, reducing uncertainty in the grasp poses caused by clutter and occlusions. In trials of grasping 20 objects from clutter, our MVP controller achieves 80% grasp success, outperforming a single-viewpoint…
The rise of deep learning has greatly transformed the pipeline of robotic grasping from model-based approach to data-driven stream. Along this line, a large scale of grasping data either collected from simulation or from real world examples become extremely important. In this paper, we present our recent work on data generation in simulation for a bin-picking scene. 77 objects from the YCB object data sets are used to generate the dataset with PyBullet, where different environment conditions are taken into account including lighting, camera pose, sensor noise and so on. In all, 100K data sampl…
Deep learning-based grasp prediction models have become an industry standard for robotic bin-picking systems. To maximize pick success, production environments are often equipped with several end-effector tools that can be swapped on-the-fly, based on the target object. Tool-change, however, takes time. Choosing the order of grasps to perform, and corresponding tool-change actions, can improve system throughput; this is the topic of our work. The main challenge in planning tool change is uncertainty - we typically cannot see objects in the bin that are currently occluded. Inspired by queuing a…
Autonomous dual-arm manipulation is an essential skill to deploy robots in unstructured scenarios. However, this is a challenging undertaking, particularly in terms of perception and planning. Unstructured scenarios are full of objects with different shapes and appearances that have to be grasped in a very specific manner so they can be functionally used. In this paper we present an integrated approach to perform dual-arm pick tasks autonomously. Our method consists of semantic segmentation, object pose estimation, deformable model registration, grasp planning and arm trajectory optimization. …
Picking Bins Empty: A Hierarchical Hybrid Approach with Online Self-Learning of Grasp Points for Reliable Industrial Bin-Picking
University of Stuttgart（斯图加特大学）；Mercedes-Benz AG（梅赛德斯-奔驰公司）；Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）；DLR Institute of Robotics and Mechatronics（德国航空航天中心机器人与机电一体化研究所）；Fraunhofer Institute for Industrial Engineering (IAO)（弗劳恩霍夫工业工程研究所）
Graz University of Technology（格拉茨技术大学）；University of Klagenfurt（克拉根福大学）
In this paper, we present a novel deep neural network architecture for joint class-agnostic object segmentation and grasp detection for robotic picking tasks using a parallel-plate gripper. We introduce depth-aware Coordinate Convolution (CoordConv), a method to increase accuracy for point proposal based object instance segmentation in complex scenes without adding any additional network parameters or computation complexity. Depth-aware CoordConv uses depth data to extract prior information about the location of an object to achieve highly accurate object instance segmentation. These resulting…
Objects grasping, also known as the bin-picking, is one of the most common tasks faced by industrial robots. While much work has been done in related topics, grasping randomly piled objects still remains a challenge because much of the existing work either lack robustness or costs too much resource. In this paper, we develop a fast and robust bin-picking system for grasping densely piled objects adaptively and safely. The proposed system starts with point cloud segmentation using improved density-based spatial clustering of application with noise (DBSCAN) algorithm, which is improved by combin…
This paper focuses on a robotic picking tasks in cluttered scenario. Because of the diversity of objects and clutter by placing, it is much difficult to recognize and estimate their pose before grasping. Here, we use U-net, a special Convolution Neural Networks (CNN), to combine RGB images and depth information to predict picking region without recognition and pose estimation. The efficiency of diverse visual input of the network were compared, including RGB, RGB-D and RGB-Points. And we found the RGB-Points input could get a precision of 95.74%.
Osaka University（大阪大学）；National Institute of Advanced Industrial Science and Technology（日本产业技术综合研究所）
Wire harnesses are essential connecting components in manufacturing industry but are challenging to be automated in industrial tasks such as bin picking. They are long, flexible and tend to get entangled when randomly placed in a bin. This makes it difficult for the robot to grasp a single one in dense clutter. Besides, training or collecting data in simulation is challenging due to the difficulties in modeling the combination of deformable and rigid components for wire harnesses. In this work, instead of directly lifting wire harnesses, we propose to grasp and extract the target following a c…
Osaka University（大阪大学）；National Institute of Advanced Industrial Science and Technology（国立先进工业科学技术研究院）
This paper addresses the problem of picking up only one object at a time avoiding any entanglement in bin-picking. To cope with a difficult case where the complex-shaped objects are heavily entangled together, we propose a topology-based method that can generate non-tangle grasp positions on a single depth image. The core technique is entanglement map, which is a feature map to measure the entanglement possibilities obtained from the input image. We use the entanglement map to select probable regions containing graspable objects. The optimum grasping pose is detected from the selected regions …
This paper focuses on robotic picking tasks in cluttered scenario. Because of the diversity of poses, types of stack and complicated background in bin picking situation, it is much difficult to recognize and estimate their pose before grasping them. Here, this paper combines Resnet with U-net structure, a special framework of Convolution Neural Networks (CNN), to predict picking region without recognition and pose estimation. And it makes robotic picking system learn picking skills from scratch. At the same time, we train the network end to end with online samples. In the end of this paper, se…
Many methods have been developed for planning the motion of robotic arms for picking and placing, ranging from local optimization to global search techniques, which are effective for sparsely placed objects. Dense clutter, however, still adversely affects the success rate, computation times, and quality of solutions in many real-world setups. The current work integrates tools from existing methodologies and proposes a framework that achieves high success ratio in clutter with anytime performance. The idea is to first explore the lower dimensional end effector's task space efficiently by ignori…
Optimizing Drug Delivery in Smart Pharmacies: A Novel Framework of Multi-Stage Grasping Network Combined with Adaptive Robotics Mechanism
Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Science（中国科学院苏州生物医学工程技术研究所）；Fuzhou University（福州大学）；Monash University（莫纳什大学）；The First Affiliated Hospital, Nanjing Medical University（南京医科大学第一附属医院）
Seg2Grasp: A Robust Modular Suction Grasping in Bin Picking
Interdisciplinary Program in AI, Seoul National University（首尔国立大学人工智能跨学科项目）；Artificial Intelligence Institute, Seoul National University（首尔国立大学人工智能研究所）；Department of Computer Science, Seoul National University（首尔国立大学计算机科学系）
Bosch Center for Artificial Intelligence（博世人工智能中心）
Many possible fields of application of robots in real world settings hinge on the ability of robots to grasp objects. As a result, robot grasping has been an active field of research for many years. With our publication we contribute to the endeavor of enabling robots to grasp, with a particular focus on bin picking applications. Bin picking is especially challenging due to the often cluttered and unstructured arrangement of objects and the often limited graspability of objects by simple top down grasps. To tackle these challenges, we propose a fully self-supervised reinforcement learning appr…
Harbin Institute of Technology, Shenzhen（哈尔滨工业大学（深圳））；The Chinese University of Hong Kong（香港中文大学）
This paper presents a vision based robotic system to handle the picking problem involved in automatic express package dispatching. By utilizing two RealSense RGB-D cameras and one UR10 industrial robot, package dispatching task which is usually done by human can be completed automatically. In order to determine grasp point for overlapped deformable objects, we improved the sampling algorithm proposed by the group in Berkeley to directly generate grasp candidate from depth images. For the purpose of package recognition, the deep network framework YOLO is integrated. We also designed a multi-mod…
University of California, Berkeley（加州大学伯克利分校）；FANUC Advanced Research Lab.（发那科高级研究实验室）
Customized grippers have specifically designed fingers to increase the contact area with the workpieces and improve the grasp robustness. However, grasp planning for customized grippers is challenging due to the object variations, surface contacts and structural constraints of the grippers. In this paper, we propose a learning framework to plan robust grasps for customized grippers in real-time. The learning framework contains a low-level optimization-based planner to search for optimal grasps locally under object shape variations, and a high-level learning-based explorer to learn the grasp ex…
Dorabot Inc.（多拉机器人公司）；University of Hong Kong（香港大学）；Advanced Industrial Science and Technology（日本产业技术综合研究所）；University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校）；City University of Hong Kong（香港城市大学）
Robots that autonomously manipulate objects within warehouses have the potential to shorten the package delivery time and improve the efficiency of the e-commerce industry. In this paper, we present a robotic system that is capable of both picking and placing general objects in warehouse scenarios. Given a target object, the robot autonomously detects it from a shelf or a table and estimates its full 6D pose. With this pose information, the robot picks the object using its gripper, and then places it into a container or at a specified location. We describe our pick-and-place system in detail w…
We focus on the task of object manipulation to an arbitrary goal pose, in which a robot is supposed to pick an assigned object to place at the goal position with a specific orientation. However, limited by the execution space of the manipulator with gripper, one-step picking, moving and releasing might be failed, where a reorientation object pose is required as a transition. In this paper, we propose a learning-driven anytime prioritized search-based solver to find a feasible solution with low path cost in a short time. In our work, the problem is formulated as a hierarchical learning problem,…
The AUTOLab at University of California, Berkeley（加州大学伯克利分校AUTOLab实验室）
A new generation of automated bin picking systems using deep learning is evolving to support increasing demand for e-commerce. To accommodate a wide variety of products, many automated systems include multiple gripper types and/or tool changers. However, for some objects, sequential grasp failures are common: when a computed grasp fails to lift and remove the object, the bin is often left unchanged; as the sensor input is consistent, the system retries the same grasp over and over, resulting in a significant reduction in mean successful picks per hour (MPPH). Based on an empirical study of seq…
ETH Zurich（苏黎世联邦理工学院）；ABB Corporate Research（ABB集团企业研究中心）
Picking a specific object from clutter is an essential component of many manipulation tasks. Partial observations often require the robot to collect additional views of the scene before attempting a grasp. This paper proposes a closed-loop next-best-view planner that drives exploration based on occluded object parts. By continuously predicting grasps from an up-to-date scene reconstruction, our policy can decide online to finalize a grasp execution or to adapt the robot's trajectory for further exploration. We show that our reactive approach decreases execution times without loss of grasp succ…
Graduate School of Engineering Science, Osaka University（大阪大学工程科学研究生院）；Intelligent Systems Research Institute, National Institute of Advanced Industrial Science and Technology（日本产业技术综合研究所智能系统研究所）
In this research, we tackle the problem of picking an object from randomly stacked pile. Since complex physical phenomena of contact among objects and fingers makes it difficult to perform the bin-picking with high success rate, we consider introducing a learning based approach. For the purpose of collecting enough number of training data within a reasonable period of time, we introduce a physics simulator where approximation is used for collision checking. In this paper, we first formulate the learning based robotic bin-picking by using CNN (Convolutional Neural Network). We also obtain the o…
This paper describes a method for generating robot grasps by jointly considering stability and other task and object-specific constraints. We introduce a three-level representation that is acquired for each object class from a small number of exemplars of objects, tasks, and relevant grasps. The representation encodes task-specific knowledge for each object class as a relationship between a keypoint skeleton and suitable grasp points that is preserved despite intra-class variations in scale and orientation. The learned models are queried at run time by a simple sampling-based method to guide t…
Osaka University（大阪大学）；National Inst. of AIST（国立先进工业科学技术研究所）
This paper develops a flexible and robust robotic system for autonomous drawing on 3D surfaces. The system takes 2D drawing strokes and a 3D target surface (mesh or point clouds) as input. It maps the 2D strokes onto the 3D surface and generates a robot motion to draw the mapped strokes using visual recognition, grasp pose reasoning, and motion planning. The system is flexible compared to conventional robotic drawing systems as we do not fix drawing tools to the end of a robot arm. Instead, a robot selects drawing tools using a vision system and holds drawing tools for painting using its hand.…
Robotic grasping in cluttered environments is often infeasible due to obstacles preventing possible grasps. Then, pre-grasping manipulation like shifting or pushing an object becomes necessary. We developed an algorithm that can learn, in addition to grasping, to shift objects in such a way that their grasp probability increases. Our research contribution is threefold: First, we present an algorithm for learning the optimal pose of manipulation primitives like clamping or shifting. Second, we learn non-prehensible actions that explicitly increase the grasping probability. Making one skill (shi…
Osaka University（大阪大学）；National Institute of Advanced Industrial Science and Technology (AIST)（产业技术综合研究所）；Kanazawa University（金泽大学）；Toyota Motors Co., Ltd.（丰田汽车公司）
This paper proposes a novel method for randomized bin-picking based on learning. When a two-fingered gripper tries to pick an object from the pile, a finger often contacts a neighboring object. Even if a finger contacts a neighboring object, the target object will be successfully picked depending on the configuration of neighboring objects. In our proposed method, we use the visual information on neighboring objects to train the discriminator. Corresponding to a grasping posture of an object, the discriminator predicts whether or not the pick will be successful even if a finger contacts a neig…
Pickalo: Leveraging 6D Pose Estimation for Low-Cost Industrial Bin Picking
MESH Facility (formerly iCub Tech), Istituto Italiano di Tecnologia（意大利技术研究院MESH设施（原iCub Tech））；AMI laboratory, Istituto Italiano di Tecnologia（意大利技术研究院AMI实验室）；Institut des Systèmes Intelligents et de Robotique (ISIR)（智能系统与机器人研究所（ISIR））；Generative Bionics（Generative Bionics公司）；Camozzi Automation SpA（Camozzi自动化股份公司）
