This paper deals with the problem of jointly designing the source precoder, the relaying matrices, and the destination equalizer in a multiple-relay amplify-and-forward (AF) cooperative multiple-input multiple-output (MIMO) wireless network, when partial channel-state information (CSI) is available. Specifically, the considered approaches are based on the knowledge of instantaneous CSI of the first-hop channel matrix, whereas only statistical CSI of the second-hop channels is assumed. In such a scenario, with respect to the case when instantaneous CSI of both the first- and second-hop MIMO channel matrices is exploited, existing network designs exhibit a significant performance degradation. Relying on a relaxed minimum-mean-square-error (MMSE) criterion, we show that the design based on the potential activation of all possible antennas for all available AF relays leads to a mathematically intractable optimization problem. Therefore, we develop a joint relay-and-antenna selection procedure that determines the best subset of the available antennas possibly belonging to different relays. Monte Carlo simulations show that, compared to designs based on the selection of the best relay, the proposed strategy offers a significant performance gain, by also outperforming other recently proposed relay/antenna selection schemes.
In this paper, we investigate joint source precoding matrices and relay processing matrix design for multi-user multiple-input multiple-output~(MU-MIMO) non-regenerative relay networks in the presence of the direct source-destination~(S-D) links. We consider both capacity and mean-squared error~(MSE) criterions subject to the distributed power constraints, which are nonconvex and apparently have no simple solutions. Therefore, we propose an optimal source precoding matrix structure based on the point-to-point MIMO channel technique, and a new relay processing matrix structure under the modifie…
We propose a greedy minimum mean squared error (MMSE)-based antenna selection algorithm for amplify-and-forward (AF) multiple-input multiple-output (MIMO) relay systems. Assuming equal-power allocation across the multi-stream data, we derive a closed form expression for the mean squared error (MSE) resulted from adding each additional antenna pair. Based on this result, we iteratively select the antenna-pairs at the relay nodes to minimize the MSE. Simulation results show that our algorithm greatly outperforms the existing schemes.
We consider a multiple-input multiple-output (MIMO) relaying boardcast channel in downlink cellular networks, where the base station and the relay stations are both equipped with multiple antennas, and each user terminal has only a single antenna. In practical scenarios, channel estimation is imperfect at the receivers. Aiming at maximizing the SINR at each user, we develop two robust linear beamforming schemes respectively for the single relay case and the multi-relay case. The two proposed schemes are based on sigular value decomposition (SVD), minimum mean square error (MMSE) and regularize…
In this paper, we consider a dual-hop Multiple Input Multiple Output (MIMO) wireless relay network in the presence of imperfect channel state information (CSI), in which a source-destination pair both equipped with multiple antennas communicates through a large number of half-duplex amplify-and-forward (AF) relay terminals. We investigate the performance of three linear beamforming schemes when the CSI of relay-to-destination (R-D) link is not perfect at the relay nodes. The three efficient linear beamforming schemes are based on the matched-filter (MF), zero-forcing (ZF) precoding and regular…
We investigate a multi-pair two-way decode-andforward relaying aided massive multiple-input multiple-output antenna system under Rician fading channels, in which multiple pairs of users exchange information through a relay station having multiple antennas. Imperfect channel state information is considered in the context of maximum-ratio processing. Closedform expressions are derived for approximating the sum spectral efficiency (SE) of the system. Moreover, we obtain the powerscaling laws at the users and the relay station to satisfy a certain SE requirement in three typical scenarios. Finally…
In this paper, error performance of the cooperative communication systems with the best relay selection scheme is investigated in the presence of error propagation from role to destination. The error propagation expression is derived firstly when the best relay is selected within M relays. The derived end-to-end BER expression is verified with the computer simulations. It is shown that the best relay selection does not ensure M+1 diversity order under the error propagation unlike perfect decoding. In addition, the threshold selection for the relays has dominant effect on the error performance …
In this letter, a novel linear transmission strategy to design the linear precoding matrix~(PM) at base station~(BS) and the beamforming matrix~(BM) at relay station~(RS) for multiple-input multiple-output~(MIMO) relaying broadcast channels with direct channel (DC) is proposed, in which a linear PM is designed at BS based on DC, and the RS utilizes the PM, the backward channel and the forward channel to design the linear BM. We then give a quite tight lower bound of the achievable sum-rate of the network with the proposed strategy to measure the performance. The sum-rates achieved by the propo…
In this paper, we propose a novel cooperative multi-relay transmission scheme for mobile terminals to exploit spatial diversity. By improving the timeliness of measured channel state information (CSI) through deep learning (DL)-based channel prediction, the proposed scheme remarkably lowers the probability of wrong relay selection arising from outdated CSI in fast time-varying channels. It inherits the simplicity of opportunistic relaying by selecting a single relay, avoiding the complexity of multi-relay coordination and synchronization. Numerical results reveal that it can achieve full diver…
In this paper, we present the performance analysis of mixed RF/FSO system with multiple relays. To select the best relay, we adopt partial relay selection with outdated CSI wherein we investigate the effect of the temporal correlation of the channels. Unlike the vast majority of work, we introduce the impairments to the relays and the destination and we compare the performance against conventional RF relaying systems. We further derive the expressions of the outage probability and the ergodic capacity as well as the bounds to unpack engineering insights into the system robustness.
Maximizing the minimum rate for a full-duplex multiple-input multiple-output (MIMO) wireless network encompassing two sources and a two-way (TW) relay operating in a two hop manner is investigated. To improve the overall performance, using a zero-forcing approach at the relay to suppress the residual self-interference arising from full-duplex (FD) operation, the underlying max-min problem is cast as an optimization problem which is non-convex. To circumvent this issue, semidefinite relaxation technique is employed, leading to upper and lower bound solutions for the optimization problem. Numeri…
In this work, we study the problem of relay beamforming for an underlay cognitive radio relay network using amplify-and-forward (AF) relaying technique. We consider a cognitive radio network consisting of single primary and multiple secondary transmitters/receivers. In addition, there are several relay nodes that help both primary and secondary networks. We propose a new beamforming method for relays' transmission, in which the beamforming weights at the relays are the solution of an optimization problem. The objective of the optimization problem is maximizing the worst case signal to interfer…
Among the recent advances and innovations in wireless technologies, reconfigurable intelligent surfaces (RISs) have received much attention and are envisioned to be one of the enabling technologies for beyond 5G (B5G) networks. On the other hand, active (or classical) cooperative relays have played a key role in providing reliable and power-efficient communications in previous wireless generations. In this article, we focus on hybrid network architectures that amalgamate both active relays and RISs. The operation concept and protocols of each technology are first discussed. Subsequently, we pr…
In this letter, we address the optimal source and relay matrices design for the multiple-input multiple-output~(MIMO) relaying broadcast channels~(BC) with direct links~(DLs) based on weighted sum-rate criterion.This problem is nonlinear nonconvex and its optimal solution remains open. To develop an efficient way to solve this problem,we first set up an equivalent problem, and solve it by decoupling it into two tractable subproblems. Finally, we propose a general linear iterative design algorithm based on alternative optimization. This iterative design algorithm is convergent since the solutio…
In this paper we study on a massive MIMO relay system with linear precoding under the conditions of imperfect channel state information at the transmitter (CSIT) and per-user channel transmit correlation. In our system the source-relay channels are massive multiple-input multiple-output (MIMO) ones and the relay-destination channels are massive multiple-input single-output (MISO) ones. Large random matrix theory (RMT) is used to derive a deterministic equivalent of the signal-to-interference-plus-noise ratio (SINR) at each user in massive MIMO amplify-forward and decode-forward (M-MIMO-ADF) re…
In this paper, we consider a dual-hop Multiple Input Multiple Output (MIMO) wireless multi-relay network, in which a source-destination pair both equipped with multiple antennas communicates through multiple half-duplex amplify-and-forward (AF) relay terminals which are also with multiple antennas. Since perfect channel state information (CSI) is difficult to obtain in practical multi-relay network, we consider imperfect CSI for all channels. We focus on maximizing the signal-to-interference-plus-noise ratio (SINR) at the destination. We propose a novel robust linear beamforming at the relays,…
Semantic-Forward Relaying: A Novel Framework Towards 6G Cooperative Communications
Northwestern Polytechnical University（西北工业大学）；University of Houston（休斯顿大学）；Kyung Hee University（庆熙大学）；IMT-Atlantique（IMT-大西洋）；Japan Advanced Institute of Science Technology（日本先端科学技术大学院大学）；University of Oulu（奥卢大学）
We present a novel approach to maximizing the transmission rate in a MIMO relay system, where all nodes are equipped with multiple antennas and the relay is self-sustained by harvesting energy. We formulate an optimization problem and use dual-characterization to derive a closed-form solution for the optimal power splitting ratio and precoding design. We propose an efficient primal-dual algorithm to jointly optimize the power allocation at source and relay for transmission and the power splitting at relay for energy harvesting, and show that using non-uniform power splitting is optimal. Numeri…
This letter presents a device-to-device (D2D) enabling cellular full-duplex (FD) cooperative protocol using non-orthogonal multiple access (NOMA), where an FD relay assists in relaying NOMA far user's signal and transmits a D2D receiver's signal simultaneously. The ergodic capacity, outage probability, and diversity order of the proposed protocol are theoretically investigated under the realistic assumption of imperfect self and known interference cancellation. The Outcome of the investigation demonstrates the performance gain of the suggested protocol over conventional FD cooperative NOMA sys…
In this paper, relay selection is considered to enhance security of a cooperative system with multiple threshold-selection decode-and-forward (DF) relays. Threshold-selection DF relays are the relays in which a predefined signal-to-noise ratio is set for the condition of successful decoding of the source message. We focus on the practical and general scenario where the channels suffer from independent non-identical Rayleigh fading and where the direct links between the source and destination and source and eavesdropper are available. Based on channel state information knowledge, three relay se…
This paper investigates wireless information and power transfer in a full-duplex MIMO relay channel where the self-sustained relay harvests energy from both source transmit signal and self-interference signal to decode and forward source information to a destination. We present a novel technique to jointly optimize power splitting at the relay and precoding design (power allocation) for both the source and relay transmissions. We formulate a new convex optimization problem, establish the dual problem via closed-form optimal primal solutions, and design an efficient primal-dual algorithm to max…
Unmanned aerial vehicles provide new opportunities for performance improvements in future wireless communications systems. For example, they can act as relays that extend the range of a communication link and improve the capacity. Unlike conventional relays that are deployed at fixed locations, UAVs can change their positions to optimize the capacity or range on demand. In this paper, we consider using a swarm of UAVs as amplify-and-forward MIMO relays to provide connectivity between an obstructed multi-antenna equipped source and destination. We start by optimizing UAV placement for the singl…
Energy-harvesting and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels which represents outdoor environments. Unlike these studies, in this paper we analyze the performance of wireless power transfer in two-hop decode-and-forward (DF) cooperative relaying systems in indoor channels characterized by log-normal fading. Three well-known energy-harvesting protocols are considered in our evaluations: a) time-switching relaying (TSR), b) pow…
While the combination of multi-antenna and relaying techniques has been extensively studied for Long Term Evolution Advanced (LTE-A) and Internet of Things (IoT) applications, it is expected to still play an important role in 5th Generation (5G) networks. However, the expected benefits of these technologies cannot be achieved without a proper system design. In this paper, we consider the problem of jointly optimizing terminal precoders/decoders and relay forwarding matrices on the basis of the sum mean square error (MSE) criterion in multiple-input multiple-output (MIMO) two-way relay systems,…
