In this paper, we present a new performance bound for uplink channel estimation (CE) accuracy in the Massive Multiple Input Multiple Output (MIMO) system. The proposed approach is based on noise power prediction after the CE unit. Our method outperforms the accuracy of a well-known Cramer-Rao lower bound (CRLB) due to considering more statistics since performance strongly depends on a number of channel taps and power ratio between them. Simulation results are presented for the non-line of sight (NLOS) 3D-UMa model of 5G QuaDRiGa 2.0 channel and compared with CRLB and state-of-the-art CE algorithms.
Although it is often used in the orthogonal frequency division multiplexing (OFDM) systems, application of massive multiple-input multiple-output (MIMO) over the orthogonal time frequency space (OTFS) modulation could suffer from enormous training overhead in high mobility scenarios. In this paper, we propose one uplink-aided high mobility downlink channel estimation scheme for the massive MIMO-OTFS networks. Specifically, we firstly formulate the time domain massive MIMO-OTFS signal model along the uplink and adopt the expectation maximization based variational Bayesian (EM-VB) framework to r…
We develop a two-stage deep learning pipeline architecture to estimate the uplink massive MIMO channel with one-bit ADCs. This deep learning pipeline is composed of two separate generative deep learning models. The first one is a supervised learning model and designed to compensate for the quantization loss. The second one is an unsupervised learning model and optimized for denoising. Our results show that the proposed deep learning-based channel estimator can significantly outperform other state-of-the-art channel estimators for one-bit quantized massive MIMO systems. In particular, our desig…
Massive multiple-input multiple-output (MIMO) is a promising technology for next generation wireless communication systems (5G). In this technology, Base Station (BS) is equipped with a large number of antennas. Employing high resolution analog-to-digital converters (ADCs) for all antennas may cause high costs and high power consumption for the BS. By performing numerical results, we evaluate the use of low-resolution ADCs for uplink massive MIMO by analyzing Bit Error Rate (BER) performance for different detection techniques (MMSE, ZF) and different modulations (QPSK, 16-QAM) to find an optim…
The uplink performance of massive multiple-input-multiple-output (MIMO) systems where the base stations (BS) employ low-resolution analog-to-digital converters (ADCs) is analyzed. A high performance MMSE receiver that takes both additive white Gaussian noise (AWGN) and quantization noise into consideration is designed, which works well for both cases of uniform resolution ADCs and non-uniform resolution ADCs. With the proposed MMSE receiver, we then employ the random matrix theory to derive the asymptotic equivalent of the uplink spectral efficiency (SE) of the system. Numerical results show t…
This paper considers a lens antenna array-assisted millimeter wave (mmWave) multiuser multiple-input multiple-output (MU-MIMO) system. The base station's beam selection matrix and user terminals' phase-only beamformers are jointly designed with the aim of maximizing the uplink sum rate. In order to deal with the formulated mixed-integer optimization problem, a penalty dual decomposition (PDD)-based iterative algorithm is developed via capitalizing on the weighted minimum mean square error (WMMSE), block coordinate descent (BCD), and minorization-maximization (MM) techniques. Moreover, a low-co…
This paper analyses the performance of filter bank multicarrier (FBMC) signaling in conjunction with offset quadrature amplitude modulation (OQAM) in multi-user (MU) massive multiple-input multiple-output (MIMO) systems. Initially, closed form expressions are derived for tight lower bounds corresponding to the achievable uplink sum-rates for FBMC-based single-cell MU massive MIMO systems relying on maximum ratio combining (MRC), zero forcing (ZF) and minimum mean square error (MMSE) receiver processing with/without perfect channel state information (CSI) at the base station (BS). This is achie…
Uplink channel estimation is a crucial component for the performance of cellular massive MIMO systems. However, when the number of user equipments (UEs) grows, the sharing of the available resources causes interference between UEs in neighboring cells. Minimum mean squared error (MMSE) channel estimators have been proposed to mitigate this interference, but these require estimates of the channel covariance matrices. Therefore, a new channel covariance matrix estimator for low-rank channel covariance matrices is presented in this paper, using a generalized eigenvalue decomposition (GEVD) of two…
This paper considers the uplink performance of a multi-user massive multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system with mobile users. Mobility brings two major problems to a MIMO-OFDM system: inter carrier interference (ICI) and channel aging. In practice, it is common to allot multiple contiguous subcarriers to a user as well as schedule multiple users on each subcarrier. Motivated by this, we consider a general subcarrier allocation scheme and derive expressions for the ICI power, uplink signal to interference plus noise ratio and the achievable …
Cell-free massive MIMO (CF-mMIMO) is expected to provide reliable wireless services for a large number of user equipments (UEs) using access points (APs) distributed across a wide area. When the UEs are battery-powered, uplink energy efficiency (EE) becomes an important performance metric for CF-mMIMO systems. Therefore, if the "target" spectral efficiency (SE) is met, it is important to optimize the uplink EE when setting the transmit powers of the UEs. Also, such transmit power control (TPC) method must be tested on channel data from real-world measurements to prove its effectiveness. In thi…
We consider the problem of max-min fairness for uplink cell-free massive multiple-input multiple-output (MIMO) subject to per-user power constraints. The standard framework for solving the considered problem is to separately solve two subproblems: the receiver filter coefficient design and the power control problem. While the former has a closed-form solution, the latter has been solved using either second-order methods of high computational complexity or a first-order method that provides an approximate solution. To deal with these drawbacks of the existing methods, we propose a mirror prox b…
Having lower quantization resolution, has been introduced in the literature, as a solution to reduce the power consumption of massive MIMO and millimeter wave MIMO systems. In this paper, we analyze bit error rate (BER) performance of quantized uplink massive MIMO employing a few-bit resolution ADCs. Considering Zero-Forcing (ZF) detection, we derive a closed-form quantized signal-to-interference-plus-noise ratio (SINR) to achieve an analytical BER approximation for coarse quantized M-QAM massive MIMO systems, by using a linear quantization model. The proposed expression is a function of quant…
Next generation wireless networks aim at providing substantial improvements in spectral efficiency (SE) and energy efficiency (EE). Massive MIMO has been proved to be a viable technology to achieve these goals by spatially multiplexing several users using many base station (BS) antennas. A potential limitation of Massive MIMO in multicell systems is pilot contamination, which arises in the channel estimation process from the interference caused by reusing pilots in neighboring cells. A standard method to reduce pilot contamination, known as regular pilot (RP), is to adjust the length of pilot …
A new random access scheme is proposed to solve the intra-cell pilot collision for M2M communication in crowded asynchronous massive multiple-input multiple-output (MIMO) systems. The proposed scheme utilizes the proposed estimation of signal parameters via rotational invariance technique enhanced (ESPRIT-E) method to estimate the effective timing offsets, and then active UEs obtain their timing errors from the effective timing offsets for uplink message transmission. We analyze the mean squared error of the estimated effective timing offsets of UEs, and the uplink throughput. Simulation resul…
Conventional uplink equalization in massive MIMO systems relies on a centralized baseband processing architecture. However, as the number of base station antennas increases, centralized baseband processing architectures encounter two bottlenecks, i.e., the tremendous data interconnection and the high-dimensional computation. To tackle these obstacles, decentralized baseband processing was proposed for uplink equalization, but only applicable to the scenarios with unpractical white Gaussian noise assumption. This paper presents an uplink linear minimum mean-square error (L-MMSE) equalization me…
In this paper, we develop a novel angle-domain adaptive filtering (ADAF)-based frequency synchronization method for the uplink of a massive multiple-input multiple-output (MIMO) multiuser network, which is applicable for users with either separate or overlapped angle-of-arrival (AoA) regions. For each user, we first introduce the angle-constraining matrix (ACM), which consists of a set of selected match-filter (MF) beamformers pointing to the AoAs of the interested user. Then, the adaptive beamformer can be acquired by appropriately designing the ADAF vectors. Such beamformer can achieve two-s…
We propose an uplink massive MIMO system using an array of holographic metasurfaces as a sector antenna. The antenna consists of a set of rectangular waveguide-fed metasurfaces combined along the elevation direction into a planar aperture, each with subwavelength-sized metamaterial elements as radiators. The metamaterial radiators are designed such that the waveguide-fed metasurface implements a holographic solution for the guided (or reference) mode, generating a fan beam towards a prescribed direction, thereby forming a multibeam antenna system. We demonstrate that a narrowband uplink massiv…
Decentralized baseband processing (DBP) architecture, which partitions the base station antennas into multiple antenna clusters, has been recently proposed to alleviate the excessively high interconnect bandwidth, chip input/output data rates, and detection complexity for massive multi-user multiple-input multiple-output (MU-MIMO) systems. In this paper, we develop a novel decentralized Gaussian message passing (GMP) detection for the DBP architecture. By projecting the discrete probability distribution into a complex Gaussian function, the local means and variances iteratively calculated in e…
One challenge for FDD massive MIMO communication system is how to obtain the downlink channel state information (CSI) at the base station. Except for traditional codebook feedback through uplink pilot transmission, some channel reciprocity properties can be utilized through uplink channel estimation and channel parameter estimation algorithms. In this paper, the uplink and downlink channel reciprocity properties are analyzed. It is theoretically proved that not all multipath parameters for FDD downlink and uplink channels are equivalent. Therefore, the so called full reciprocity property does …
Advances in analog-to-digital converter (ADC) technology have opened up the possibility to directly digitize wideband radio frequency (RF) signals, avoiding the need for analog down-conversion. In this work, we consider an orthogonal frequency-division multiplexing (OFDM)-based massive multi-user (MU) multiple-input multiple-output (MIMO) uplink system that relies on direct RF-sampling at the base station and digitizes the received RF signals with 1-bit ADCs. Using Bussgang's theorem, we provide an analytical expression for the error-vector magnitude (EVM) achieved by digital down-conversion a…
In this paper, we investigate the uplink performance of cell-free (CF) extremely large-scale multiple-input-multipleoutput (XL-MIMO) systems, which is a promising technique for future wireless communications. More specifically, we consider the practical scenario with multiple base stations (BSs) and multiple user equipments (UEs). To this end, we derive exact achievable spectral efficiency (SE) expressions for any combining scheme. It is worth noting that we derive the closed-form SE expressions for the CF XL-MIMO with maximum ratio (MR) combining. Numerical results show that the SE performanc…
This paper focuses on the use of a deep learning approach to perform sum-rate-max and max-min power allocation in the uplink of a cell-free massive MIMO network. In particular, we train a deep neural network in order to learn the mapping between a set of input data and the optimal solution of the power allocation strategy. Numerical results show that the presence of the pilot contamination in the cell-free massive MIMO system does not significantly affect the learning capabilities of the neural network, that gives near-optimal performance. Conversely, with the introduction of the shadowing eff…
Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. However, the effect of a strong interferer in the adjacent band on quantized massive MIMO systems have not been examined yet. In this study, we analyze the performance of uplink massive MIMO with low-resol…
This paper considers channel estimation and uplink achievable rate of the coarsely quantized massive multiple-input multiple-output (MIMO) system with radio frequency (RF) impairments. We utilize additive quantization noise model (AQNM) and extended error vector magnitude (EEVM) model to analyze the impacts of low-resolution analog-to-digital converters (ADCs) and RF impairments respectively. We show that hardware impairments cause a nonzero floor on the channel estimation error, which contraries to the conventional case with ideal hardware. The maximal-ratio combining (MRC) technique is then …
Cell-free Massive MIMO (mMIMO) is envisaged to be a next-generation technology beyond 5G with its high spectral efficiency and superior spatial diversity as compared to that of conventional MIMO technology. The main principle is that many distributed access points (APs) cooperate to simultaneously serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture. We propose a novel sequential processing algorithm with normalized linear minimum mean square error (N-LMMSE) combining…
Reconfigurable intelligent surface (RIS) has recently drawn intensive attention due to its potential of simultaneously realizing high spectral and energy efficiency in a sustainable way. This paper focuses on the design of efficient transmission methods to maximize the uplink sum throughput in a RIS-aided multi-user multi-input multi-output (MU-MIMO) system. To provide an insightful basis, the channel capacity of RIS-aided MU-MIMO is theoretically analyzed. Then, the conventional transmission schemes based on orthogonal multiple access are presented as the baseline. From the information-theore…
In this paper, we investigate a cell-free massive MIMO system with both access points and user equipments equipped with multiple antennas over the Weichselberger Rayleigh fading channel. We study the uplink spectral efficiency (SE) based on a two-layer decoding structure with maximum ratio (MR) or local minimum mean-square error (MMSE) combining applied in the first layer and optimal large-scale fading decoding method implemented in the second layer, respectively. To maximize the weighted sum SE, an uplink precoding structure based on an Iteratively Weighted sum-MMSE (I-WMMSE) algorithm using …
When a quantizer input signal is the sum of the desired signal and input white noise, the quantization error is a function of total input signal. Our new equivalent model splits the quantization error into two components: a non-linear distortion (NLD) that is a function of only the desired part of input signal (without noise), and an equivalent out-put white noise. This separation is important because these two terms affect MIMO system performance differently. This paper introduces our model, and applies it to determine the minimal Analog-to-Digital Converter (ADC) resolution necessary to oper…
With the inherent benefits, such as, better cell coverage and higher area throughput, extra-large scale massive multiple-input multiple-output (MIMO) has great potential to be one of the key technologies for the next generation wireless communication systems. However, in practice, when the antenna dimensions grow large, spatial non-stationarities occur and users will only see a portion of the base station antenna array, which we call visibility region (VR). To assess the impact of spatial non-stationarities, in this paper, we investigate the uplink transmission of extra-large scale massive MIM…
High-speed train (HST) communications with orthogonal frequency division multiplexing (OFDM) techniques have received significant attention in recent years. Besides, cell-free (CF) massive multiple-input multiple-output (MIMO) is considered a promising technology to achieve the ultimate performance limit. In this paper, we focus on the performance of CF massive MIMO-OFDM systems with both matched filter and large-scale fading decoding (LSFD) receivers in HST communications. HST communications with small cell and cellular massive MIMO-OFDM systems are also analyzed for comparison. Considering t…
The updated physical layer standard of the fifth generation wireless communication suggests the necessity of a rapid prototyping platform. To this end, we develop RaPro, a multi-core general purpose processor-based massive multiple-input-multiple-output (MIMO) prototyping platform. To enhance RaPro, high performance detection and beamforming are needed, whereas both of them request for accurate channel state information (CSI). In this paper, linear minimum mean square error (LMMSE)-based channel estimator is adopted and encapsulated inside RaPro to gain more accurate CSI. Considering the high …
This paper considers the uplink of a massive MIMO communication system using 5G New Radio-compliant multiple access, which is to co-exist with a radar system using the same frequency band. A system model taking into account the reverberation (clutter) produced by the radar system onto the massive MIMO receiver is proposed. In this scenario, several receivers for uplink channel estimation and data detection are proposed, ranging from the simple channel-matched beamformer to the zero-forcing and linear minimum mean square error receivers for clutter disturbance rejection, under the two opposite …
In this paper, we study Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) radios for simultaneous data communication and control information exchange. Capitalizing on a recently proposed FD MIMO architecture combining digital transmit and receive beamforming with reduced complexity multi-tap analog Self-Interference (SI) cancellation, we propose a novel transmission scheme exploiting channel reciprocity for joint downlink beamformed information data communication and uplink channel estimation through training data transmission. We adopt a general model for pilot-assisted channel estimatio…
Millimeter-wave (mmWave) cell-free massive multi-user (MU) multiple-input multiple-output (MIMO) systems combine the large bandwidths available at mmWave frequencies with the improved coverage of cell-free systems. However, to combat the high path loss at mmWave frequencies, user equipments (UEs) must form beams in meaningful directions, i.e., to a nearby access point (AP). At the same time, multiple UEs should avoid transmitting to the same AP to reduce MU interference. We propose an interference-aware method for beam alignment (BA) in the cell-free mmWave massive MU-MIMO uplink. In the consi…
In this paper, we investigate the uplink transmit power optimization problem in cell-free (CF) extremely large-scale multiple-input multiple-output (XL-MIMO) systems. Instead of applying the traditional methods, we propose two signal processing architectures: the centralized training and centralized execution with fuzzy logic as well as the centralized training and decentralized execution with fuzzy logic, respectively, which adopt the amalgamation of multi-agent reinforcement learning (MARL) and fuzzy logic to solve the design problem of power control for the maximization of the system spectr…
Classical antenna selection schemes require instantaneous channel state information (CSI). This leads to high signaling overhead in the system. This work proposes a novel joint receive antenna selection and precoding scheme for multiuser multiple-input multiple-output uplink transmission that relies only on the long-term statistics of the CSI. The proposed scheme designs the switching network and the uplink precoders, such that the expected throughput of the system in the long term is maximized. Invoking results from the random matrix theory, we derive a closed-form expression for the expected…
When operating massive multiple-input multiple-output (MIMO) systems with uplink (UL) and downlink (DL) channels at different frequencies (frequency division duplex (FDD) operation), acquisition of channel state information (CSI) for downlink precoding is a major challenge. Since, barring transceiver impairments, both UL and DL CSI are determined by the physical environment surrounding transmitter and receiver, it stands to reason that, for a static environment, a mapping from UL CSI to DL CSI may exist. First, we propose to use various neural network (NN)-based approaches that learn this mapp…
