Review of Pulsar Timing Array for Gravitational Wave Research

Using the pulsar timing software package, TEMPO2

This paper contains details on the algorithms implemented in the TEMPO2 pulsar timing software package and describes how the software is used. Information is given on how to download and install the software, use the various interfaces, simulate realistic data sets and develop the software. The use of TEMPO2 in predictive mode is also described.

Comparison of dynamical and kinematic reference frames via pulsar positions from timing, Gaia, and interferometric astrometry

Pulsars are special objects whose positions can be determined independently from timing, radio interferometric, and Gaia astrometry at sub-milliarcsecond (mas) precision; thus, they provide a unique way to monitor the link between dynamical and kinematic reference frames. We aimed to assess the orientation consistency between the dynamical reference frame represented by the planetary ephemeris and the kinematic reference frames constructed by Gaia and VLBI through pulsar positions. We identified 49 pulsars in Gaia Data Release 3 and 62 pulsars with very long baseline interferometry (VLBI) posi…

Pulsar timing analysis in the presence of correlated noise

Pulsar timing observations are usually analysed with least-square-fitting procedures under the assumption that the timing residuals are uncorrelated (statistically "white"). Pulsar observers are well aware that this assumption often breaks down and causes severe errors in estimating the parameters of the timing model and their uncertainties. Ad hoc methods for minimizing these errors have been developed, but we show that they are far from optimal. Compensation for temporal correlation can be done optimally if the covariance matrix of the residuals is known using a linear transformation that wh…

Prospects for gravitational wave astronomy with next generation large-scale pulsar timing arrays

Next generation radio telescopes, namely the Five-hundred-meter Aperture Spherical Telescope (FAST) and the Square Kilometer Array (SKA), will revolutionize the pulsar timing arrays (PTAs) based gravitational wave (GW) searches. We review some of the characteristics of FAST and SKA, and the resulting PTAs, that are pertinent to the detection of gravitational wave signals from individual supermassive black hole binaries.

How to take the interstellar weather with you in pulsar timing analysis

Here we present a Bayesian method of including discrete measurements of dispersion measure due to the interstellar medium in the direction of a pulsar as prior information in the analysis of that pulsar. We use a simple simulation to show the efficacy of this method, where the inclusion of the additional measurements results in both a significant increase in the precision with which the timing model parameters can be obtained, and an improved upper limit on the amplitude of any red noise in the dataset. We show that this method can be applied where no multi-frequency data exists across much of…

Coherent network analysis for continuous gravitational wave signals in a pulsar timing array: Pulsar phases as extrinsic parameters

Supermassive black hole binaries are one of the primary targets for gravitational wave searches using pulsar timing arrays. Gravitational wave signals from such systems are well represented by parametrized models, allowing the standard Generalized Likelihood Ratio Test (GLRT) to be used for their detection and estimation. However, there is a dichotomy in how the GLRT can be implemented for pulsar timing arrays: there are two possible ways in which one can split the set of signal parameters for semi-analytical and numerical extremization. The straightforward extension of the method used for con…

Improved Pulsar Timing via Principle Component Mode Tracking

We present a principal component analysis method which tracks and compensates for short-timescale variability in pulsar profiles, with a goal of improving pulsar timing precision. We couple this with a fast likelihood technique for determining pulse time of arrival, marginalizing over the principal component amplitudes. This allows accurate estimation of timing errors in the presence of pulsar variability. We apply the algorithm to the slow pulsar PSR J2139+0040 using an archived set of untargeted raster-scan observations at arbitrary epochs across four years, obtaining an improved timing solu…

Gravitational wave research using pulsar timing arrays

A pulsar timing array (PTA) refers to a program of regular, high-precision timing observations of a widely distributed array of millisecond pulsars. Here we review the status of the three primary PTA projects and the joint International Pulsar Timing Array project. We discuss current results related to ultra-low-frequency gravitational wave searches and highlight opportunities for the near future.

Continuous gravitational wave searches with pulsar timing arrays: Maximization versus marginalization over pulsar phase parameters

Resolvable Supermassive Black Hole Binaries are promising sources for Pulsar Timing Array based gravitational wave searches. Search algorithms for such targets must contend with the large number of so-called pulsar phase parameters in the joint log-likelihood function of the data. We compare the localization accuracy for two approaches: Maximization over the pulsar phase parameters (MaxPhase) against marginalization over them (AvPhase). Using simulated data from a pulsar timing array with 17 pulsars, we find that for weak and moderately strong signals, AvPhase outperforms MaxPhase significantl…

Pulsar timing array projects

Pulsars are amongst the most stable rotators known in the Universe. Over many years some millisecond pulsars rival the stability of atomic clocks. Comparing observations of many such stable pulsars may allow the first direct detection of gravitational waves, improve the Solar System planetary ephemeris and provide a means to study irregularities in terrestrial time scales. Here we review the goals and status of current and future pulsar timing array projects.

Millisecond Pulsars as Standards: Timing, positioning and communication

Millisecond pulsars (MSPs) have a great potential to set standards in timekeeping, positioning and metadata communication.

Noise in pulsar timing arrays

To successfully detect gravitational waves with pulsar timing arrays, we need to have a comprehensive understanding of the physical origins and statistical characteristics of the noise in pulse arrival times and identify mitigation methods to reduce the noise. In this paper we will review radiometer noise, phase jitter noise and timing noise in the noise budget of pulsar timing and show various efforts used to reduce them. We will briefly discuss the results of an overall assessment of the components and physical causes of the timing residuals for millisecond pulsars in the North American Nano…

TEMPO2, a new pulsar timing package. III: Gravitational wave simulation

Analysis of pulsar timing data-sets may provide the first direct detection of gravitational waves. This paper, the third in a series describing the mathematical framework implemented into the tempo2 pulsar timing package, reports on using tempo2 to simulate the timing residuals induced by gravitational waves. The tempo2 simulations can be used to provide upper bounds on the amplitude of an isotropic, stochastic, gravitational wave background in our Galaxy and to determine the sensitivity of a given pulsar timing experiment to individual, supermassive, binary black hole systems.

ORT与uGMRT脉冲星监测项目：脉冲星星计时不规则性与高斯过程实现

The ORT and the uGMRT Pulsar Monitoring Program : Pulsar Timing Irregularities & the Gaussian Process Realization

本研究利用ORT和uGMRT观测数据，分析17颗脉冲星的计时噪声与周期突变，首次报道多颗脉冲星的新突变事件与频率演化，提出区分突变后红噪声参数升高，提出可区分突变与强计时噪声的验证方法。

The optimal schedule for pulsar timing array observations

In order to maximize the sensitivity of pulsar timing arrays to a stochastic gravitational wave background, we present computational techniques to optimize observing schedules. The techniques are applicable to both single and multi-telescope experiments. The observing schedule is optimized for each telescope by adjusting the observing time allocated to each pulsar while keeping the total amount of observing time constant. The optimized schedule depends on the timing noise characteristics of each individual pulsar as well as the performance of instrumentation. Several examples are given to illu…

Interstellar Medium Mitigation Techniques in Pulsar Timing Arrays

Pulsar Timing Arrays use a set of millisecond pulsars in an attempt to directly detect nanohertz gravitational waves. For this purpose, high precision timing of the pulsars is essential and ultimately a precision of the order of ~100 ns is required. Propagation effects in the interstellar medium cause the radio emission from a pulsar to be dispersed and scattered, introducing time variable delays of the pulses on their way to Earth. If these delays are not properly corrected for, they may cause significant errors in the timing analysis of a pulsar. These proceedings will review the effects of …

New advances in the Gaussian-process approach to pulsar-timing data analysis

In this work we review the application of the theory of Gaussian processes to the modeling of noise in pulsar-timing data analysis, and we derive various useful and optimized representations for the likelihood expressions that are needed in Bayesian inference on pulsar-timing-array datasets. The resulting viewpoint and formalism lead us to two improved parameter-sampling schemes inspired by Gibbs sampling. The new schemes have vastly lower chain autocorrelation lengths than the Markov Chain Monte Carlo methods currently used in pulsar-timing data analysis, potentially speeding up Bayesian infe…

Timing analysis for 20 millisecond pulsars in the Parkes Pulsar Timing Array

We present timing models for 20 millisecond pulsars in the Parkes Pulsar Timing Array. The precision of the parameter measurements in these models has been improved over earlier results by using longer data sets and modelling the non-stationary noise. We describe a new noise modelling procedure and demonstrate its effectiveness using simulated data. Our methodology includes the addition of annual dispersion measure (DM) variations to the timing models of some pulsars. We present the first significant parallax measurements for PSRs J1024-0719, J1045-4509, J1600-3053, J1603-7202, and J1730-2304,…

Why Gravitational Wave Science Needs Pulsar Timing Arrays And Why Pulsar Timing Arrays Need Both Arecibo and the GBT: A Response to the NSF-AST Portfolio Review from the NANOGrav Collaboration

Gravitational waves (GWs) are ripples in space-time that are known to exist but have not yet been detected directly. Once they are, a key feature of any viable theory of gravity will be demonstrated and a new window on the Universe opened. GW astronomy was named as one of five key discovery areas in the New Worlds, New Horizons Decadal Report. Pulsar timing probes GW frequencies, and hence source classes, that are inaccessible to any other detection method and can uniquely constrain the nonlinear nature of General Relativity. Pulsar timing is therefore a critical capability with its own discov…

A coherent acceleration search of the Parkes multi-beam pulsar survey - techniques and the discovery and timing of 16 pulsars

A fully coherent acceleration search algorithm has been applied to the Parkes multi- beam pulsar survey of the Galactic plane to search for previously undiscovered relativistic binary pulsars. The search has resulted in the discovery of 16 pulsars including a binary millisecond pulsar and an intermittent pulsar. Despite a number of promising candidates there have been no new discoveries of relativistic binary pulsars. Here we detail the acceleration search performed in our analysis and present coherent timing solutions for each of pulsars discovered. In light of the lack of discoveries of rela…

脉冲星计时与偏振测量：结果与展望

Pulsar timing and polarimetry: results and perspectives

本文全面综述了脉冲星计时与偏振测量领域的研究现状，重点介绍了多个国际PTA合作组织在探测nHz引力波随机背景方面的最新进展，并回顾了基于脉冲星数据对标量超轻物质的约束，探讨了其在基础物理和宇宙学中的应用前景。

Realistic sensitivity curves for pulsar timing arrays

We construct realistic sensitivity curves for pulsar timing array searches for gravitational waves, incorporating both red and white noise contributions to individual pulsar noise spectra, as well as the effect of fitting to a pulsar timing model. We demonstrate the method on both simulated pulsars and a realistic array consisting of a subset of NANOGrav pulsars used in recent analyses. A comparison between the results presented here and exact sensitivity curves shows agreement to tens of percent. The resulting sensitivity curves can be used to assess the detectability of predicted gravitation…

TempoNest: A Bayesian approach to pulsar timing analysis

A new Bayesian software package for the analysis of pulsar timing data is presented in the form of TempoNest which allows for the robust determination of the non-linear pulsar timing solution simultaneously with a range of additional stochastic parameters. This includes both red spin noise and dispersion measure variations using either power law descriptions of the noise, or through a model-independent method that parameterises the power at individual frequencies in the signal. We use TempoNest to show that at noise levels representative of current datasets in the European Pulsar Timing Array …

The Benefits of VLBI Astrometry to Pulsar Timing Array Searches for Gravitational Radiation

Precision astrometry is an integral component of successful pulsar timing campaigns. Astrometric parameters are commonly derived by fitting them as parameters of a timing model to a series of pulse times of arrival (TOAs). TOAs measured to microsecond precision over several-year spans can yield position measurements with sub-milliarcsecond precision. However, timing-based astrometry can become biased if a pulsar displays any red spin noise, which can be compared to the red noise signal produced by the stochastic gravitational wave background. We investigate how noise of different spectral type…

Pulsar timing irregularities and the Neutron Star interior in the era of SKA: An Indian Outlook

There are two types of timing irregularities seen in pulsars: glitches and timing noise. Both of these phenomena can help us probe the interior of such exotic objects. This article presents a brief overview of the observational and theoretical aspects of pulsar timing irregularities and the main results from the investigations of these phenomena in India. The relevance of such Indian programs for monitoring of young pulsars with the Square Kilometer Array (SKA) is presented, highlighting possible contributions of the Indian neutron star community to the upcoming SKA endeavour.

Pulsar Timing Array Experiments

Pulsar timing is a technique that uses the highly stable spin periods of neutron stars to investigate a wide range of topics in physics and astrophysics. Pulsar timing arrays (PTAs) use sets of extremely well-timed pulsars as a Galaxy-scale detector with arms extending between Earth and each pulsar in the array. These challenging experiments look for correlated deviations in the pulsars' timing that are caused by low-frequency gravitational waves (GWs) traversing our Galaxy. PTAs are particularly sensitive to GWs at nanohertz frequencies, which makes them complementary to other space- and grou…

The Role of FAST in Pulsar Timing Arrays

The Five-hundred-meter Aperture Spherical Telescope (FAST) will become one of the world-leading telescopes for pulsar timing array (PTA) research. The primary goals for PTAs are to detect (and subsequently study) ultra-low-frequency gravitational waves, to develop a pulsar-based time standard and to improve solar system planetary ephemerides. FAST will have the sensitivity to observe known pulsars with significantly improved signal-to-noise ratios and will discover a large number of currently unknown pulsars. We describe how FAST will contribute to PTA research and show that jitter- and timing…

The stochastic background: scaling laws and time to detection for pulsar timing arrays

We derive scaling laws for the signal-to-noise ratio of the optimal cross-correlation statistic, and show that the large power-law increase of the signal-to-noise ratio as a function of the the observation time $T$ that is usually assumed holds only at early times. After enough time has elapsed, pulsar timing arrays enter a new regime where the signal to noise only scales as $\sqrt{T}$. In addition, in this regime the quality of the pulsar timing data and the cadence become relatively un-important. This occurs because the lowest frequencies of the pulsar timing residuals become gravitational-w…

Improving the precision of pulsar timing through polarization statistics

At the highest levels of pulsar timing precision achieved to date, experiments are limited by noise intrinsic to the pulsar. This stochastic wideband impulse modulated self-noise (SWIMS) limits pulsar timing precision by randomly biasing the measured times of arrival and thus increasing the root mean square (rms) timing residual. We discuss an improved methodology of removing this bias in the measured times of arrival by including information about polarized radiation. Observations of J0437-4715 made over a one-week interval at the Parkes Observatory are used to demonstrate a nearly 40 per cen…

Search for the gravitational wave memory effect with the Parkes Pulsar Timing Array

Gravitational wave bursts produced by supermassive binary black hole mergers will leave a persistent imprint on the space-time metric. Such gravitational wave memory signals are detectable by pulsar timing arrays as a glitch event that would seem to occur simultaneously for all pulsars. In this paper, we describe an initial algorithm which can be used to search for gravitational wave memory signals. We apply this algorithm to the Parkes Pulsar Timing Array data set. No significant gravitational wave memory signal is founded in the data set.

Nano-Hertz Gravitational Waves Searches with Interferometric Pulsar Timing Experiments

We estimate the sensitivity to nano-Hertz gravitational waves of pulsar timing experiments in which two highly-stable millisecond pulsars are tracked simultaneously with two neighboring radio telescopes that are referenced to the same time-keeping subsystem (i.e. "the clock"). By taking the difference of the two time-of-arrival residual data streams we can exactly cancel the clock noise in the combined data set, thereby enhancing the sensitivity to gravitational waves. We estimate that, in the band ($10^{-9} - 10^{-8}$) Hz, this "interferometric" pulsar timing technique can potentially improve…

Pulsar Timing Arrays: Status and Techniques

Three pulsar timing arrays are now producing high quality data sets. As reviewed in this paper, these data sets are been processed to 1) develop a pulsar-based time standard, 2) search for errors in the solar system planetary ephemeris and 3) detect gravitational waves. It is expected that the data sets will significantly improve in the near future by combining existing observations and by using new telescopes.

Pulsar Timing Techniques

We describe the procedure, nuances, issues, and choices involved in creating times-of-arrival (TOAs), residuals and error bars from a set of radio pulsar timing data. We discuss the issue of mis-matched templates, the problem that wide- bandwidth backends introduce, possible solutions to that problem, and correcting for offsets introduced by various observing systems.

Solar-System Studies with Pulsar Timing Arrays

High-precision pulsar timing is central to a wide range of astrophysics and fundamental physics applications. When timing an ensemble of millisecond pulsars in different sky positions, known as a pulsar timing array (PTA), one can search for ultra-low-frequency gravitational waves (GWs) through the spatial correlations that spacetime deformations by passing GWs are predicted to induce on the pulses' times-of-arrival (TOAs). A pulsar-timing model, requires the use of a solar-system ephemeris (SSE) to properly predict the position of the solar-system barycentre, the (quasi-)inertial frame where …

Hurst parameter analysis of radio pulsar timing noise

We present an analysis of timing residual (noise) of 54 pulsars obtained from 25-m radio telescope at Urumqi Observatory with a time span of 5~8 years, dealing with statistics of the Hurst parameter. The majority of these pulsars were selected to have timing noise that look like white noise rather than smooth curves. The results are compared with artificial series of different constant pairwise covariances. Despite the noise like appearance, many timing residual series showed Hurst parameters significantly deviated from that of independent series. We concluded that Hurst parameter may be capab…

A Model-Independent Determination of Red Noise in Pulsar Timing Arrivals

Noise is ubiquitous in pulsar signals where red noise has been attributed to effects arising from the interstellar medium, spin noise, and pulsar mode changes, among others. The red noise, however, has not been detected in all pulsars. Using the dataset from the North American Nanohertz Observatory for Gravitational Waves (NANOGrav), we investigate twenty-three pulsars and show that an evaluation of the mean square deviation and probability distribution of timing residuals can provide a straightforward way of determining the presence of red noise. The results agree with those reported in the l…

Wide-band timing of GMRT discovered millisecond pulsars

Modeling of frequency-dependent effects, contributed by the turbulence in the free electron density of interstellar plasma, is required to enable the detection of the expected imprints from the stochastic gravitational-wave (GW) background in pulsar timing data. In this work, we present an investigation of temporal variations of interstellar medium for a set of millisecond pulsars (MSPs) with the upgraded GMRT aided by large fractional bandwidth at lower observing frequencies. Contrary to the conventional narrow-band analysis using a frequency invariant template profile, we applied $PulsePortr…

Pulsars probe the low-frequency gravitational sky: Pulsar Timing Arrays basics and recent results

Pulsar Timing Array (PTA) experiments exploit the clock-like behaviour of an array of millisecond pulsars, with the goal of detecting low-frequency gravitational waves. PTA experiments have been in operation over the last decade, led by groups in Europe, Australia, and North America. These experiments use the most sensitive radio telescopes in the world, extremely precise pulsar timing models and sophisticated detection algorithms to increase the sensitivity of PTAs. No detection of gravitational waves has been made to date with this technique, but PTA upper limits already contributed to rule …

Detecting nanohertz gravitational waves with pulsar timing arrays

Complementary to ground-based laser interferometers, pulsar timing array experiments are being carried out to search for nanohertz gravitational waves. Using the world's most powerful radio telescopes, three major international collaborations have collected $\sim$10-year high precision timing data for tens of millisecond pulsars. In this paper we give an overview on pulsar timing experiments, gravitational wave detection in the nanohertz regime, and recent results obtained by various timing array projects.

使用Vela.jl进行贝叶斯脉冲星计时与噪声分析：宽带范式

Bayesian pulsar timing and noise analysis with Vela.jl: the wideband paradigm

本文介绍Vela.jl软件包，首次实现脉冲星计时宽带范式，可直接从频率分辨积分脉冲轮廓同时导出到达时间和色散量测量，并用NANOGrav 12.5年数据验证。

A dynamical approach in exploring the unknown mass in the Solar system using pulsar timing arrays

The error in the Solar system ephemeris will lead to dipolar correlations in the residuals of pulsar timing array for widely separated pulsars. In this paper, we utilize such correlated signals, and construct a Bayesian data-analysis framework to detect the unknown mass in the Solar system and to measure the orbital parameters. The algorithm is designed to calculate the waveform of the induced pulsar-timing residuals due to the unmodelled objects following the Keplerian orbits in the Solar system. The algorithm incorporates a Bayesian-analysis suit used to simultaneously analyse the pulsar-tim…

Limitations in timing precision due to single-pulse shape variability in millisecond pulsars

High-sensitivity radio-frequency observations of millisecond pulsars usually show stochastic, broadband, pulse-shape variations intrinsic to the pulsar emission process. These variations induce jitter noise in pulsar timing observations; understanding the properties of this noise is of particular importance for the effort to detect gravitational waves with pulsar timing arrays. We assess the short-term profile and timing stability of 22 millisecond pulsars that are part of the Parkes Pulsar Timing Array sample by examining intra-observation arrival time variability and single-pulse phenomenolo…

Prospects for High-Precision Pulsar Timing with the New Effelsberg PSRIX Backend

The PSRIX backend is the primary pulsar timing instrument of the Effelsberg 100-m radio telescope since early 2011. This new ROACH-based system enables bandwidths up to 500 MHz to be recorded, significantly more than what was possible with its predecessor, the Effelsberg-Berkeley Pulsar Processor (EBPP). We review the first four years of PSRIX timing data for 33 pulsars collected as part of the monthly European Pulsar Timing Array (EPTA) observations. We describe the automated data analysis pipeline, CoastGuard, that we developed to reduce these observations. We also introduce TOASTER, the EPT…

The European Pulsar Timing Array: current efforts and a LEAP toward the future

The European Pulsar Timing Array (EPTA) is a multi-institutional, multi-telescope collaboration, with the goal of using high-precision pulsar timing to directly detect gravitational waves. In this article we discuss the EPTA member telescopes, current achieved timing precision, and near-future goals. We report a preliminary upper limit to the amplitude of a gravitational wave background. We also discuss the Large European Array for Pulsars, in which the five major European telescopes involved in pulsar timing will be combined to provide a coherent array that will give similar sensitivity to th…

The Parkes Pulsar Timing Array Project

A "pulsar timing array" (PTA), in which observations of a large sample of pulsars spread across the celestial sphere are combined, allows investigation of "global" phenomena such as a background of gravitational waves or instabilities in atomic timescales that produce correlated timing residuals in the pulsars of the array. The Parkes Pulsar Timing Array (PPTA) is an implementation of the PTA concept based on observations with the Parkes 64-m radio telescope. A sample of 20 millisecond pulsars is being observed at three radio-frequency bands, 50cm (~700 MHz), 20cm (~1400 MHz) and 10cm (~3100 M…

Observing gravitational wave bursts in pulsar timing measurements

We propose a novel method for observing the gravitational wave signature of super-massive black hole (SMBH) mergers. This method is based on detection of a specific type of gravitational waves, namely gravitational wave burst with memory (BWM), using pulsar timing. We study the unique signature produced by BWM in anomalous pulsar timing residuals. We show that the present day pulsar timing precision allows one to detect BWM due to SMBH mergers from distances up to 1 Gpc (for case of equal mass 10^8 Msun SMBH). Improvements in precision of pulsar timing together with the increase in number of o…

脉冲星计时阵列需要分层模型

Pulsar Timing Arrays require hierarchical models

针对脉冲星计时阵列（PTA）项目中无信息先验导致引力波信号参数估计偏差的问题，提出分层贝叶斯建模的合适先验，联合描述脉冲星集合及各分量特性，建议重新评估PTA结果。

The Feasibility of Using Black Widow Pulsars in Pulsar Timing Arrays for Gravitational Wave Detection

In the past five years, approximately one third of the 65 pulsars discovered by radio observations of Fermi unassociated sources are black widow pulsars (BWPs). BWPs are binary millisecond pulsars with companion masses ranging from 0.01-0.1 solar masses which often exhibit radio eclipses. The bloated companions in BWP systems exert small torques on the system causing the orbit to change on small but measurable time scales. Because adding parameters to a timing model reduces sensitivity to a gravitational wave (GW) signal, the need to fit many orbital frequency derivatives to the timing data is…

四颗GMRT发现的毫秒脉冲星的十年计时研究

Decade-long timing of four GMRT discovered millisecond pulsars

本文报告了四颗GMRT发现的毫秒脉冲星的十年计时结果，分析了2017年升级前后的计时精度提升，并评估了这些数据对脉冲星计时阵列探测引力波信号的价值。

Nancay radiotelescope as part of the international Pulsar Timing campaigns

Nancay radiotelescope is involved in high precision timing since 20 years. Since 2004, a coherent dedispersion instrumentation enables numerous routine observations on more than 200 pulsars using half of the time if this 100-meters class radiotelescope. Two main programs are currently conducted. A large set of young and old pulsars is timed for a multi-wavelength approach, complementary to the very successful high energy observations of pulsars done by FERMI. A set of highly stable millisecond pulsars is monitored as our contribution to the European Pulsar Timing Array in order to probe the co…

贝叶斯脉冲星计时与噪声分析：Vela.jl 概述

Bayesian pulsar timing and noise analysis with Vela.jl: an overview

本文介绍 Vela，一个基于 Julia 的贝叶斯脉冲星计时与噪声分析软件包，提供完整非线性模型的并行实现，并附 Python 绑定 pyvela，强调可靠性与窄带范式下的使用。

The noise properties of 42 millisecond pulsars from the European Pulsar Timing Array and their impact on gravitational wave searches

The sensitivity of Pulsar Timing Arrays to gravitational waves depends on the noise present in the individual pulsar timing data. Noise may be either intrinsic or extrinsic to the pulsar. Intrinsic sources of noise will include rotational instabilities, for example. Extrinsic sources of noise include contributions from physical processes which are not sufficiently well modelled, for example, dispersion and scattering effects, analysis errors and instrumental instabilities. We present the results from a noise analysis for 42 millisecond pulsars (MSPs) observed with the European Pulsar Timing Ar…

JUG：基于JAX的统一脉冲星计时工具

JUG: JAX-based Unified pulsar timinG

JUG是一款基于JAX的独立脉冲星计时软件，速度快、易用，可处理大规模数据，弥合频率论与贝叶斯分析鸿沟，性能优于PINT，与Tempo2相当。

Proving the short-wavelength approximation in Pulsar Timing Array gravitational-wave background searches

A low-frequency gravitational-wave background (GWB) from the cosmic merger history of supermassive black holes is expected to be detected in the next few years by pulsar timing arrays. A GWB induces distinctive correlations in the pulsar residuals --- the expected arrival time of the pulse less its actual arrival time. Simplifying assumptions are made in order to write an analytic expression for this correlation function, called the Hellings and Downs curve for an isotropic GWB, which depends on the angular separation of the pulsar pairs, the gravitational-wave frequency considered, and the di…