This paper considers signal detection in massive multiple-input multiple-output (MIMO) systems with general additive hardware impairments and one-bit quantization. First, we present the quantization-unaware and Bussgang decomposition-based linear receivers by generalizing them for the considered hardware impairment model. We propose an optimization problem to estimate the uplink data signals by choosing a suitable cost function that treats the unquantized received signal at the base station as the variable. We exploit the additional structure of the one-bit quantization and signal modulation by including proper constraints. To solve the non-convex quadratically-constrained quadratic programming (QCQP) problem, we propose an ADMM-based algorithm with closed-form update equations. Then, we replace the harsh projectors in the updates with their soft versions to improve the detection performance. We show that the proposed ADMM-based algorithm outperforms the state-of-the-art linear receivers significantly in terms of bit error rate (BER) and the performance gain increases with the number of antennas and users.
In this letter, we develop an $\ell_2$-box maximum likelihood (ML) formulation for massive multiple-input multiple-output (MIMO) quadrature amplitude modulation (QAM) signal detection and customize an alternating direction method of multipliers (ADMM) algorithm to solve the nonconvex optimization model. In the $\ell_2$-box ADMM implementation, all variables are solved analytically. Moreover, several theoretical results related to convergence, iteration complexity, and computational complexity are presented. Simulation results demonstrate the effectiveness of the proposed $\ell_2$-box ADMM dete…
Distributed phased arrays based multiple-input multiple-output (DPA-MIMO) is a recently proposed highly reconfigurable architecture enabling both spatial multiplexing and beamforming in millimeter-wave (mmWave) systems. In this work, we focus on coping with the hybrid precoding for the wideband DPA-MIMO system with orthogonal frequency division multiplexing (OFDM) modulation. More specifically, we propose an alternating direction method of multipliers (ADMM) enabled hybrid precoding approach based on an alternating optimization framework, abbreviated to ADMM-AltMin, for such cooperative array-…
In this paper, we develop an efficient detector for massive multiple-input multiple-output (MIMO) communication systems via penalty-sharing alternating direction method of multipliers (PS-ADMM). Its main content are as follows: first, we formulate the MIMO detection as a maximum-likelihood optimization problem with bound relaxation constraints. Then, the higher modulation signals are decomposed into a sum of multiple binary variables through their inherent structures, by exploiting introduced binary variables as penalty functions, the detection optimization model is equivalent to a nonconvex s…
This paper considers channel estimation and uplink achievable rate of the coarsely quantized massive multiple-input multiple-output (MIMO) system with radio frequency (RF) impairments. We utilize additive quantization noise model (AQNM) and extended error vector magnitude (EEVM) model to analyze the impacts of low-resolution analog-to-digital converters (ADCs) and RF impairments respectively. We show that hardware impairments cause a nonzero floor on the channel estimation error, which contraries to the conventional case with ideal hardware. The maximal-ratio combining (MRC) technique is then …
We consider a reconfigurable intelligent surface (RIS)-aided massive multi-user multiple-input multiple-output (MIMO) communication system with transceiver hardware impairments (HWIs) and RIS phase noise. Different from the existing contributions, the phase shifts of the RIS are designed based on the long-term angle informations. Firstly, an approximate analytical expression of the uplink achievable rate is derived. Then, we use genetic algorithm (GA) to maximize the sum rate and the minimum date rate. Finally, we show that it is crucial to take HWIs into account when designing the phase shift…
In multicell massive multiple-input multiple-output (MIMO) non-orthogonal multiple access (NOMA) networks, base stations (BSs) with multiple antennas deliver their radio frequency energy in the downlink, and Internet-of-Things (IoT) devices use their harvested energy to support uplink data transmission. This paper investigates the energy efficiency (EE) problem for multicell massive MIMO NOMA networks with wireless power transfer (WPT). To maximize the EE of the network, we propose a novel joint power, time, antenna selection, and subcarrier resource allocation scheme, which can properly alloc…
In this paper, we propose an optimization framework for rate splitting (RS) techniques in multiple-input multiple-output (MIMO) reconfigurable intelligent surface (RIS)-assisted systems, possibly with I/Q imbalance (IQI). This framework can be applied to any optimization problem in which the objective and/or constraints are linear functions of the rates and/or transmit covariance matrices. Such problems include minimum-weighted and weighted-sum rate maximization, total power minimization for a target rate, minimum-weighted energy efficiency (EE) and global EE maximization. The framework may be…
In this paper, we analyze the asymptotic rate for a multi-carrier (MC) full-duplex (FD) massive multiple input multiple output (mMIMO) decode and forward (DF) relay system which serves multiple MC single-antenna half-duplex (HD) nodes. We take into account the impact of hardware distortions resulting in residual self-interference (SI) and inter-carrier leakage (ICL) as well as the impact of imperfect channel state information (CSI). We derive the asymptotic rate expression of our system employed with maximum ratio transmitting (MRT)/ maximum ratio combining (MRC) strategy when the number of th…
An alternate direction method of multipliers (ADMM)-based detectors can achieve good performance in both small and large-scale multiple-input multiple-output (MIMO) systems. However, due to the difficulty of choosing the optimal penalty parameters, their performance is limited. This paper presents a deep neural network (DNN)-based massive MIMO detection method which can overcome the above limitation. It exploits the unfolding technique and learns to estimate the penalty parameters. Additionally, a computationally cheaper detector is also proposed. The proposed methods can handle the higher-ord…
This paper investigates the performance of improper Gaussian signaling (IGS) for the $K$-user multiple-input, multiple-output (MIMO) interference channel (IC) with hardware impairments (HWI). HWI may arise due to imperfections in the devices like I/Q imbalance, phase noise, etc. With I/Q imbalance, the received signal is a widely linear transformation of the transmitted signal and noise. Thus, the effective noise at the receivers becomes improper, which means that its real and imaginary parts are correlated and/or have unequal powers. IGS can improve system performance with improper noise and/…
In this paper, we design an efficient quadrature amplitude modulation (QAM) signal detector for massive multiple-input multiple-output (MIMO) communication systems via the penalty-sharing alternating direction method of multipliers (PS-ADMM). Its main content is as follows: first, we formulate QAM-MIMO detection as a maximum-likelihood optimization problem with bound relaxation constraints. Decomposing QAM signals into a sum of multiple binary variables and exploiting introduced binary variables as penalty functions, we transform the detection optimization model to a non-convex sharing problem…
Reconfigurable intelligent surface (RIS) has been anticipated to be a novel cost-effective technology to improve the performance of future wireless systems. In this paper, we investigate a practical RIS-aided multiple-input-multiple-output (MIMO) system in the presence of transceiver hardware impairments, RIS phase noise and imperfect channel state information (CSI). Joint design of the MIMO transceiver and RIS reflection matrix to minimize the total average mean-square-error (MSE) of all data streams is particularly considered. This joint design problem is non-convex and challenging to solve …
In this paper, we design constant modulus probing waveforms with good correlation properties for collocated multi-input multi-output (MIMO) radar systems. The main content is as follows: first, we formulate the design problem as a fourth order polynomial minimization problem with constant modulus constraints. Then, by exploiting introduced auxiliary variables and their inherent structures, the polynomial optimization model is equivalent to a non-convex consensus minimization problem. Second, a customized alternating direction method of multipliers (ADMM) algorithm is proposed to solve the non-…
Low overhead channel estimation based on compressive sensing (CS) has been widely investigated for hybrid wideband millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. The channel sparsifying dictionaries used in prior work are built from ideal array response vectors evaluated on discrete angles of arrival/departure. In addition, these dictionaries are assumed to be the same for all subcarriers, without considering the impacts of hardware impairments and beam squint. In this manuscript, we derive a general channel and signal model that explicitly incorporates the impacts of …
Multiple input multiple output (MIMO) system transmission is a popular diversity technique to improve the reliability of a communication system where transmitter, communication channel and receiver are the important elements. Data transmission reliability can be ensured when the bit error rate is very low. Normally, multiple antenna elements are used at both the transmitting and receiving section in MIMO Systems. MIMO system utilizes antenna diversity or spatial diversity coding system in wireless channels because wireless channels severely suffer from multipath fading in which the transmitted…
Massive arrays deployed in millimeter-wave systems enable high angular resolution performance, which in turn facilitates sub-meter localization services. Albeit suboptimal, up to now the most popular localization approach has been based on a so-called two-step procedure, where triangulation is applied upon aggregation of the angle-of-arrival (AoA) measurements from the collaborative base stations. This is mainly due to the prohibitive computational cost of the existing direct localization approaches in large-scale systems. To address this issue, we propose a deep unfolding based fast direct lo…
In multi-cell massive MIMO systems, channel estimation is deteriorated by pilot contamination and the effects of pilot contamination become more severe due to hardware impairments. In this paper, we propose a joint pilot design and channel estimation based on deep residual learning in order to mitigate the effects of pilot contamination under the consideration of hardware impairments. We first investigate a conventional linear minimum mean square error (LMMSE) based channel estimator to suppress the interference caused by pilot contamination. After that, a deep learning based pilot design is p…
In this paper, we address the power allocation problem for a decode and forward (DF) relay system, where a massive multiple-input-multiple-output (mMIMO) multi-carrier (MC) base station (BS) node communicates with a MC single antenna node directly and also through the single antenna full duplex (FD) MC relay, using rate splitting (RS) approach. Successive interference cancellation approach is adopted at the destination. We consider orthogonal frequency division multiplexing (OFDM) as our MC strategy. We take into account the impact of hardware distortions resulting in residual self-interferenc…
Millimeter wave (mmWave) and massive MIMO systems are intrinsic components of 5G and beyond. These systems rely on using beamforming codebooks for both initial access and data transmission. Current beam codebooks, however, generally consist of a large number of narrow beams that scan all possible directions, even if these directions are never used. This leads to very large training overhead. Further, these codebooks do not normally account for the hardware impairments or the possible non-uniform array geometries, and their calibration is an expensive process. To overcome these limitations, thi…
Although signal distortion-based peak-to-average power ratio (PAPR) reduction is a feasible candidate for orthogonal frequency division multiplexing (OFDM) to meet standard/regulatory requirements, the error vector magnitude (EVM) stemming from the PAPR reduction has a deleterious impact on the performance of high data-rate achieving multiple-input multiple-output (MIMO) systems. Moreover, these systems must constrain the adjacent channel leakage ratio (ACLR) to comply with regulatory requirements. Several recent works have investigated the mitigation of the EVM seen at the receivers by capita…
Millimeter wave (mmWave) and terahertz MIMO systems rely on pre-defined beamforming codebooks for both initial access and data transmission. Being pre-defined, however, these codebooks are commonly not optimized for specific environments, user distributions, and/or possible hardware impairments. This leads to large codebook sizes with high beam training overhead which increases the initial access/tracking latency and makes it hard for these systems to support highly mobile applications. To overcome these limitations, this paper develops a deep reinforcement learning framework that learns how t…
Robust Learning-Based Sparse Recovery for Device Activity Detection in Grant-Free Random Access Cell-Free Massive MIMO: Enhancing Resilience to Impairments
CentraleSupélec（中央高等电力学院）；IETR - UMR CNRS 6164（电子与电信研究所 - 法国国家科学研究中心联合研究单位6164）
面向无蜂窝大规模 MIMO 的 mMTC 免授权随机接入，提出在 CPU 集中实现的数据驱动稀疏活动检测算法，并验证其抗输入扰动及定点实现性能。
This paper considers the joint impact of non-linear hardware impairments at the base station (BS) and user equipments (UEs) on the uplink performance of single-cell massive MIMO (multiple-input multiple-output) in practical Rician fading environments. First, Bussgang decomposition-based effective channels and distortion characteristics are analytically derived and the spectral efficiency (SE) achieved by several receivers are explored for third-order non-linearities. Next, two deep feedforward neural networks are designed and trained to estimate the effective channels and the distortion varian…
Massive MIMO has been the subject of intense interest in both academia and industry for the past few years. 3GPP standardization for cellular systems have adopted the principles of massive MIMO and categorized the use of large rectangular planar arrays at the base station as full-dimension MIMO (FD-MIMO) to operate in both TDD and FDD. Operating a large antenna array base station requires the system to overcome several implementation challenges caused by hardware impairments making practical solutions non-ideal and expensive to deploy at scale. It is important to learn from existing challenges…
Recently channel state information (CSI) measurements from commercial multi input multi output (MIMO) WiFi systems have been ubiquitously used for different wireless sensing applications. However, the phase of the CSI realizations is usually distorted severely by phase errors due to the hardware impairments, which significantly reduce the sensing performance. In this paper, we directly utilize the modeling of the phase distortions caused by the hardware impairments and propose an adaptive CSI estimation approach based on Kalman filter (KF) with maximum a posteriori (MAP) estimation that consid…
In this paper, we study the achievable rate region of 1-layer rate splitting (RS) in the presence of hardware impairment (HWI) and improper Gaussian signaling (IGS) for a single-cell reconfigurable intelligent surface (RIS) assisted broadcast channel (BC). We assume that the transceivers may suffer from an imbalance in in-band and quadrature signals, which is known as I/Q imbalance (IQI). The received signal and noise can be improper when there exists IQI. Therefore, we employ IGS to compensate for IQI as well as to manage interference. Our results show that RS and RIS can significantly enlarg…
University of Wollongong（伍伦贡大学）；Weizmann Institute of Science（魏茨曼科学研究所）
This work shows that a massive multiple-input multiple-output (MIMO) system with low-resolution analog-to-digital converters (ADCs) forms a natural extreme learning machine (ELM). The receive antennas at the base station serve as the hidden nodes of the ELM, and the low-resolution ADCs act as the ELM activation function. By adding random biases to the received signals and optimizing the ELM output weights, the system can effectively tackle hardware impairments, such as the nonlinearity of power amplifiers and the low-resolution ADCs. Moreover, the fast adaptive capability of ELM allows the des…
It is challenging to precisely configure the phase shifts of the reflecting elements at the reconfigurable intelligent surface (RIS) due to inherent hardware impairments (HIs). In this paper, the mean square error (MSE) performance is investigated in an RIS-aided single-user multiple-input multipleoutput (MIMO) communication system with transceiver HIs and RIS phase noise. We aim to jointly optimize the transmit precoder, linear received equalizer, and RIS reflecting matrices to minimize the MSE. To tackle this problem, an iterative algorithm is proposed, wherein the beamforming matrices are a…
When operating massive multiple-input multiple-output (MIMO) systems with uplink (UL) and downlink (DL) channels at different frequencies (frequency division duplex (FDD) operation), acquisition of channel state information (CSI) for downlink precoding is a major challenge. Since, barring transceiver impairments, both UL and DL CSI are determined by the physical environment surrounding transmitter and receiver, it stands to reason that, for a static environment, a mapping from UL CSI to DL CSI may exist. First, we propose to use various neural network (NN)-based approaches that learn this mapp…
