IoT wearable devices are widely expected to reduce the cost and risk of personal healthcare. However, ambulatory data collected from such devices are often corrupted or contaminated with severe noises. Signal Quality Indicators (SQIs) can be used to assess the quality of data obtained from wearable devices, such that transmission/ storage of unusable data can be prevented. This article introduces a novel and generalized SQI which can be implemented on an edge device for detecting the quality of any quasi-periodic signal under observation, regardless of the type of noise present. The application of this SQI on Electrocardiogram (ECG) signals is investigated. From the analysis carried out, it was found that the proposed generalized SQI is suitable for quality assessment of ECG signals and exhibits a linear behavior in the medium to high SNR regions under all noise conditions considered. The proposed SQI was used for acceptability testing of ECG records in CinC Physionet 2011 challenge dataset and found to be accurate for 90.4% of the records while having minimal computational complexity.
In the coming 6G communications, the internet of things (IoT) serves as a key enabler to collect environmental information and is expected to achieve ubiquitous deployment. However, it is challenging for traditional IoT sensors to meet this expectation because of their requirements of power supplies and frequent maintenance, which are due to their power-demanding sense and transmit modules. To address this challenge, we propose a meta-IoT sensing system, where the IoT sensors are based on specially designed meta-materials. The meta-IoT sensors achieve simultaneous sensing and transmission by p…
The combination of non-orthogonal multiple access (NOMA) using power-domain with backscatter sensor communication (BSC) is expected to connect a large-scale Internet of things (IoT) devices in future sixth-generation (6G) era. In this paper, we introduce a BSC in multi-cell IoT network, where a source in each cell transmits superimposed signal to its associated IoT devices using NOMA. The backscatter sensor tag (BST) also transmit data towards IoT devices by reflecting and modulating the superimposed signal of the source. A new optimization framework is provided that simultaneously optimizes t…
The Internet of Things (IoT) has important applications in our daily lives including health and fitness tracking, environmental monitoring and transportation. However, sensor nodes in IoT suffer from the limited lifetime of batteries resulting from their finite energy availability. A promising solution is to harvest energy from environmental sources, such as solar, kinetic, thermal and radio frequency, for perpetual and continuous operation of IoT sensor nodes. In addition to energy generation, recently energy harvesters have been used for context detection, eliminating the need for additional…
For many applications envisioned for the Internet of Things (IoT), it is expected that the sensors will have very low costs and zero power, which can be satisfied by meta-material sensor based IoT, i.e., meta-IoT. As their constituent meta-materials can reflect wireless signals with environment-sensitive reflection coefficients, meta-IoT sensors can achieve simultaneous sensing and transmission without any active modulation. However, to maximize the sensing accuracy, the structures of meta-IoT sensors need to be optimized considering their joint influence on sensing and transmission, which is …
Current air pollution monitoring systems are bulky and expensive resulting in a very sparse deployment. In addition, the data from these monitoring stations may not be easily accessible. This paper focuses on studying the dense deployment based air pollution monitoring using IoT enabled low-cost sensor nodes. For this, total nine low-cost IoT nodes monitoring particulate matter (PM), which is one of the most dominant pollutants, are deployed in a small educational campus in Indian city of Hyderabad. Out of these, eight IoT nodes were developed at IIIT-H while one was bought off the shelf. A we…
In an industrial IoT setting, ensuring the quality of sensor data is a must when data-driven algorithms operate on the upper layers of the control system. Unfortunately, the common place in industrial facilities is to find sensor time series heavily corrupted by noise and outliers. In this work, a purely data-driven self-supervised learning-based approach based on a blind denoising autoencoder is proposed for real time denoising of industrial sensor data. The term \textit{blind} stresses that no prior knowledge about the noise is required for denoising, in contrast to typical denoising autoenc…
The paper studies optimal sensor selection for source estimation in energy harvesting Internet of Things (IoT) networks. Specifically, the focus is on the selection of the sensor locations which minimizes the estimation error at a fusion center, and to optimally allocate power and bandwidth for each selected sensor subject to a prescribed spectral and energy budget. To do so, measurement accuracy, communication link quality, and the amount of energy harvested are all taken into account. The sensor selection is studied under both analog and digital transmission schemes from the selected sensors…
Internet of Things (IoTs) is an emerging trend that has enabled an upgrade in the design of wearable healthcare monitoring systems through the (integrated) edge, fog, and cloud computing paradigm. Energy efficiency is one of the most important design metrics in such IoT-healthcare systems especially, for the edge and fog nodes. Due to the sensing noise and inherent redundancy in the input data, even the most safety-critical biomedical applications can sometimes afford a slight degradation in the output quality. Hence, such inherent error tolerance in the bio-signals can be exploited to achieve…
Data transmission accounts for significant energy consumption in wireless sensor networks where streaming data is generatedby the sensors. This impedes their use in many settings, including livestock monitoring over large pastures (which formsour target application). We present Ambrosia, a lightweight protocol that utilizes a window-based timeseries forecastingmechanism for data reduction. Ambrosia employs a configurable error threshold to ensure that the accuracy of end applicationsis unaffected by the data transfer reduction. Experimental evaluations using LoRa and BLE on a real livestock mo…
Internet of Things (IoT) networks for smart sensor nodes in the next generation of smart wireless sensing systems require a distributed security scheme to prevent the passive (eavesdropping) or active (jamming and interference) attacks from untrusted sensor nodes. This paper concerns advancing the security of the IoT system to address their vulnerability to being attacked or compromised by the advancement of future supercomputers. In this work, a novel embedded architecture has been designed and implemented for a distributed IoT network that utilizes a master-slave full-duplex communication to…
Current IoT networks are characterized by an ultra-high density of devices with different energy budget constraints, typically having sparse and sporadic activity patterns. Access points require an efficient strategy to identify the active devices for a timely allocation of resources to enable massive machine-type communication. Recently, group testing based approaches have been studied to handle sparse activity detection in massive random access problems. In this paper, a non-adaptive group testing strategy is proposed which can take into account the energy constraints on different sensor clu…
Nowadays IoT based applications are becoming more popular because it provides efficient solutions for many real time problems. In this paper, an IoT based electric meter monitoring system using android application has been proposed that aims to reduce manual efforts for measuring the electricity units and make users concern about the excessive usage of electricity. Aurdino Uno and an optical sensor are used to fetch the pulse of the electric meter. In order to reduce human error and cost in energy consumption, a low cost wireless sensor network is implemented for digital energy meter and a mob…
As the Internet of Things (IOT) is growing rapidly, there is an emerging need to facilitate development of IOT devices in the design cycle while optimized performance is obtained in the field of operation. This paper develops reconfiguration approaches that enable post-production adaptation of circuit performance to enable RF IC re-use across different IOT applications. An adaptable low noise amplifier is designed and fabricated in 130nm CMOS technology to investigate the post-production reconfiguration concept. A statistical model that relates circuit-level reconfiguration parameters to circu…
Deployment of Internet of Things (IoT) devices and Data Fusion techniques have gained popularity in public and government domains. This usually requires capturing and consolidating data from multiple sources. As datasets do not necessarily originate from identical sensors, fused data typically results in a complex data problem. Because military is investigating how heterogeneous IoT devices can aid processes and tasks, we investigate a multi-sensor approach. Moreover, we propose a signal to image encoding approach to transform information (signal) to integrate (fuse) data from IoT wearable dev…
University of Oulu（奥卢大学）；Linköping University（林雪平大学）
We consider an IoT sensing network with multiple users, multiple energy harvesting sensors, and a wireless edge node acting as a gateway between the users and sensors. The users request for updates about the value of physical processes, each of which is measured by one sensor. The edge node has a cache storage that stores the most recently received measurements from each sensor. Upon receiving a request, the edge node can either command the corresponding sensor to send a status update, or use the data in the cache. We aim to find the best action of the edge node to minimize the average long-te…
Climate change has been identified as one of the most critical threats to human civilization and sustainability. Wildfires, which produce huge amounts of carbon emission, are both drivers and results of climate change. An early and timely wildfire detection system can constrain fires to short and small ones and yield significant carbon reduction. In this paper, we propose to use ground sensor deployment and satellite Internet of Things (IoT) technologies for wildfire detection by taking advantage of satellites' ubiquitous global coverage. We first develop an optimal IoT sensor placement strate…
University of Split（斯普利特大学）；Aalborg University（奥尔堡大学）
In this paper an application for building sensor wallet is presented. Currently, given system collects sensor data from The Things Network (TTN) cloud system, stores the data into the Influx database and presents the processed data to the user dashboard. Based on the type of the user, data can be viewed-only, controlled or the top user can register the sensor to the system. Moreover, the system can notify users based on the rules that can be adjusted through the user interface. The special feature of the system is the machine learning service that can be used in various scenarios and is presen…
ExxonMobil Research and Engineering Company（埃克森美孚研究与工程公司）
The proliferation of IoT sensors and their deployment in various industries and applications has brought about numerous analysis opportunities in this Big Data era. However, drift of those sensor measurements poses major challenges to automate data analysis and the ability to effectively train and deploy models on a continuous basis. In this paper we study and test several approaches from the literature with regard to their ability to cope with and adapt to sensor drift under realistic conditions. Most of these approaches are recent and thus are representative of the current state-of-the-art. …
The unprecedented growth of Internet of Things (IoT) and its applications in areas such as Smart Agriculture compels the need to devise newer ways for evaluating the quality of such applications. While existing models for application quality focus on the quality experienced by the end-user (captured using likert scale), IoT applications have minimal human involvement and rely on machine to machine communication and analytics to drive decision via actuations. In this paper, we first present a conceptual framework for the evaluation of IoT application quality. Subsequently, we propose, develop a…
Monitoring of civil infrastructures is critically needed to track aging, damages and ultimately to prevent severe failures which can endanger many lives. The ability to monitor in a continuous and fine-grained fashion the integrity of a wide variety of buildings, referred to as structural health monitoring, with low-cost, long-term and continuous measurements is essential from both an economic and a life-safety standpoint. To address these needs, we propose a low-cost wireless sensor node specifically designed to support modal analysis over extended periods of time with long-range connectivity…
National Institutes of Biomedical Innovation, Health and Nutrition（国立生物医学创新、健康与营养研究所）；Tohoku University（东北大学）；Tennessee Tech University（田纳西理工大学）；Benha University（本哈大学）；Lakehead University（湖首大学）；Thunder Bay Regional Health Research Institute（桑德贝地区健康研究所）
As we are about to embark upon the highly hyped "Society 5.0", powered by the Internet of Things (IoT), traditional ways to monitor human heart signals for tracking cardio-vascular conditions are challenging, particularly in remote healthcare settings. On the merits of low power consumption, portability, and non-intrusiveness, there are no suitable IoT solutions that can provide information comparable to the conventional Electrocardiography (ECG). In this paper, we propose an IoT device utilizing a spintronic ultra-sensitive sensor that measures the magnetic fields produced by cardio-vascular …
AI Institute, University of South Carolina（南卡罗来纳大学人工智能研究所）；Tantiv4（Tantiv4公司）
The state identification problem seeks to identify power usage patterns of any system, like buildings or factories, of interest. In this challenge paper, we make power usage dataset available from 8 institutions in manufacturing, education and medical institutions from the US and India, and an initial un-supervised machine learning based solution as a baseline for the community to accelerate research in this area.
Frequent and severe wildfires have been observed lately on a global scale. Wildfires not only threaten lives and properties, but also pose negative environmental impacts that transcend national boundaries (e.g., greenhouse gas emission and global warming). Thus, early wildfire detection with timely feedback is much needed. We propose to use the emerging beyond fifth-generation (B5G) and sixth-generation (6G) satellite Internet of Things (IoT) communication technology to enable massive sensor deployment for wildfire detection. We propose wildfire and carbon emission models that take into accoun…
UBiGTLoc: A Unified BiLSTM-Graph Transformer Localization Framework for IoT Sensor Networks
Department of Computer Science, The University of Vermont（计算机科学系，佛蒙特大学）；Department of Computer Science and Engineering, American University of Sharjah（计算机科学与工程系，阿曼大学沙迦分校）；Department of Electrical Engineering, The University of Vermont（电气工程系，佛蒙特大学）；Department of Mechanical Engineering, The University of Vermont（机械工程系，佛蒙特大学）
We investigate the long-term scheduling and power control scheme for a wirelessly powered cell-free Internet of Things (IoT) network which consists of distributed access points (APs) and large number of sensors. In each time slot, a subset of sensors are scheduled for uplink data transmission or downlink power transfer. Through asymptotic analysis, we obtain closedform expressions for the harvested energy and the achievable rates that are independent of random pilots. Then, using these expressions, we formulate a long-term scheduling and power control problem to maximize the minimum time avera…
Insitu sensors and Wireless Sensor Networks (WSNs) have become more and more popular in the last decade, due to their potential to be used in various applications of many different fields. As of today, WSNs are pretty much used by any monitoring system: from those that are health care related, to those that are used for environmental forecasting or surveillance purposes. All applications that make use of insitu sensors, strongly rely on their correct operation, which however, is quite difficult to guarantee. These sensors in fact, are typically cheap and prone to malfunction. Additionally, for…
Recent advances in Internet of Things (IoT) technologies and the reduction in the cost of sensors have encouraged the development of smart environments, such as smart homes. Smart homes can offer home assistance services to improve the quality of life, autonomy and health of their residents, especially for the elderly and dependent. To provide such services, a smart home must be able to understand the daily activities of its residents. Techniques for recognizing human activity in smart homes are advancing daily. But new challenges are emerging every day. In this paper, we present recent algori…
Current radio frequency (RF) sensors at the Edge lack the computational resources to support practical, in-situ training for intelligent spectrum monitoring, and sensor data classification in general. We propose a solution via Deep Delay Loop Reservoir Computing (DLR), a processing architecture that supports general machine learning algorithms on compact mobile devices by leveraging delay-loop reservoir computing in combination with innovative electrooptical hardware. With both digital and photonic realizations of our design of the loops, DLR delivers reductions in form factor, hardware comple…
Consider an Internet-of-Things (IoT) system that monitors a number of multi-valued events through multiple sensors sharing the same bandwidth. Each sensor measures data correlated to one or more events, and communicates to the fusion center at a base station using grant-free random access whenever the corresponding event is active. The base station aims at detecting the active events, and, for each active event, to determine a scalar value describing each active event's state. A conventional solution based on Separate Source-Channel (SSC) coding would use a separate codebook for each sensor an…
We consider a resource-constrained IoT network, where multiple users make on-demand requests to a cache-enabled edge node to send status updates about various random processes, each monitored by an energy harvesting sensor. The edge node serves users' requests by deciding whether to command the corresponding sensor to send a fresh status update or retrieve the most recently received measurement from the cache. Our objective is to find the best actions of the edge node to minimize the average age of information (AoI) of the received measurements upon request, i.e., average on-demand AoI, subjec…
Billions of everyday objects could become part of the Internet of Things (IoT) by augmentation with low-cost, long-range, maintenance-free wireless sensors. Radio Frequency Identification (RFID) is a low-cost wireless technology that could enable this vision, but it is constrained by short communication range and lack of sufficient energy available to power auxiliary electronics and sensors. Here, we explore the use of flexible perovskite photovoltaic cells to provide external power to semi-passive RFID tags to increase range and energy availability for external electronics such as microcontro…
Photovoltaic (PV) cells have the potential to serve as on-board power sources for low-power IoT devices. Here, we explore the use of perovskite solar cells to power Radio Frequency (RF) backscatter-based IoT devices with a few μW power demand. Perovskites are suitable for low-cost, high-performance, low-temperature processing, and flexible light energy harvesting that hold the possibility to significantly extend the range and lifetime of current backscatter techniques such as Radio Frequency Identification (RFID). For these reasons, perovskite solar cells are prominent candidates for future lo…
National Institute of Technology, Calicut（卡利卡特国家理工学院）
Internet of Things (IoT) has emerged with a motive to automate the human life. It can be visualized as a network of connected things which is capable of providing intelligent services. This paper presents an IoT based security surveillance system in buildings using Raspberry Pi Single Board Computer (SBC) and NodeMCU (WiFi/IoT module). This system comprises of wireless sensor nodes and a controller section for surveillance. Intrusion detection with face detection and recognition, fire detection, remote user alerts, live video streaming and portability are the prime features of the system. The …
Internet of Things (IoT) enabled wearable sensors for health monitoring are widely used to reduce the cost of personal healthcare and improve quality of life. The sleep apnea-hypopnea syndrome, characterized by the abnormal reduction or pause in breathing, greatly affects the quality of sleep of an individual. This paper introduces a novel method for apnea detection (pause in breathing) from electrocardiogram (ECG) signals obtained from wearable devices. The novelty stems from the high resolution of apnea detection on a second-by-second basis, and this is achieved using a 1-dimensional convolu…
Resilient Machine-learning Institute (ReMI)（弹性机器学习研究所）
In wireless Internet of things (IoT), the sensors usually have limited bandwidth and power resources. Therefore, in a distributed setup, each sensor should compress and quantize the sensed observations before transmitting them to a fusion center (FC) where a global decision is inferred. Most of the existing compression techniques and entropy quantizers consider only the reconstruction fidelity as a metric, which means they decouple the compression from the sensing goal. In this work, we argue that data compression mechanisms and entropy quantizers should be co-designed with the sensing goal, s…
Pukyong National University (PKNU)（釜庆国立大学）；COMSATS University Islamabad (CUI)（COMSATS伊斯兰堡大学）；King Abdulaziz University (KAU)（阿卜杜勒阿齐兹国王大学）；The Chinese University of Hong Kong (CUHK)（香港中文大学）
In this paper, we propose a novel framework for performance optimization in Internet of Things (IoT)-based next-generation wireless sensor networks. In particular, a computationally-convenient system is presented to combat two major research problems in sensor networks. First is the conventionally-tackled resource optimization problem which triggers the drainage of battery at a faster rate within a network. Such drainage promotes inefficient resource usage thereby causing sudden death of the network. The second main bottleneck for such networks is that of data degradation. This is because the …
Classifying brain signals collected by wearable Internet of Things (IoT) sensors, especially brain-computer interfaces (BCIs), is one of the fastest-growing areas of research. However, research has mostly ignored the secure storage and privacy protection issues of collected personal neurophysiological data. Therefore, in this article, we try to bridge this gap and propose a secure privacy-preserving protocol for implementing BCI applications. We first transformed brain signals into images and used generative adversarial network to generate synthetic signals to protect data privacy. Subsequentl…
