In this paper, we devise a novel radio resource block (RB) structure named dynamic resource block structure (D-RBS) which can handle low latency traffics and large fluctuations in data rates by exploiting smart time and frequency duplexing. In our framework, the main resource block with a predefined bandwidth and time duration is divided into several small blocks with the same bandwidth and time duration. Depending on the service requirements, e.g., data rate and latency, the users are assigned to some these small blocks which could be noncontiguous both in frequency and time. This is in contrast to the previously introduced static resource block structure (S-RBS) where the size of each RB is predetermined and fixed. We provide resource allocation frameworks for this RB structure and formulate the optimization problems whose solutions are obtained by alternate search method (ASM) based on successive convex approximation approach (SCA). We provide a global optimal solution by exploiting the monotonic optimization method. By simulation we study the performance of our proposed scheme with S-RBS scheme and show it has 26% gain compared to the S-RBS scheme.
Breakthroughs in information and power transfer for wireless networks are imperative in order to satisfy the requirement of wireless nodes for energy sustainability. To this end, significant research efforts in academia and industry have been devoted to the design of optimal resource allocation schemes for RF simultaneous wireless information and power transfer (SWIPT) networks. The transmit power constraints imposed by safety regulations introduce significant challenges to the improvement of the power transfer performance. Therefore, solely relying on RF resources to cope with the expectation…
Multi-Functional Chirp Signalling for Next-Generation Multi-Carrier Wireless Networks: Communications, Sensing and ISAC Perspectives
University of Essex（埃塞克斯大学）；University of Surrey（萨里大学）；University College London（伦敦大学学院）；Nanyang Technological University（南洋理工大学）；University of Southampton（南安普顿大学）
Reconfigurable Intelligent Surfaces (RIS) are a new paradigm which, with judicious deployment and alignment, can enable more favorable propagation environments and better wireless network design. As such, they can offer a number of potential benefits for next generation wireless systems including improved coverage, better interference management and even security. In this paper, we consider an uplink next generation wireless system where each user is assisted with an RIS. We study the uplink power control problem in this distributed RIS-assisted wireless network. Specifically, we aim to minimi…
We propose a low-cost reconfigurable metasurface transmitter to implement generalized polarization-space modulation (GPSM) that has been proposed for next-generation wireless communications. Unlike conventional multiple-input multiple-output GPSM, our electromagnetically-compliant, reduced form-factor design using Barium-Strontium-Titanate film yields more than two polarization states. Full-wave simulations show our optimized design achieves 0.08-0.95 polarization conversion ratio with 5% bandwidth at 28 GHz and bit error rates comparable or better than conventional systems.
Beyond the Limits of Rigid Arrays: Flexible Intelligent Metasurfaces for Next-Generation Wireless Networks
University College Dublin（都柏林大学学院）；New York University Abu Dhabi (NYUAD)（纽约大学阿布扎比分校）；Université Paris-Saclay, CNRS, CentraleSupélec, Laboratoire des Signaux et Systèmes（巴黎萨克雷大学、法国国家科学研究中心、中央苏佩莱克学院、信号与系统实验室）；King’s College London, Centre for Telecommunications Research – Department of Engineering（伦敦国王学院，电信研究中心-工程系）
With the development of next-generation wireless networks, the Internet of Things (IoT) is evolving towards the intelligent IoT (iIoT), where intelligent applications usually have stringent delay and jitter requirements. In order to provide low-latency services to heterogeneous users in the emerging iIoT, multi-tier computing was proposed by effectively combining edge computing and fog computing. More specifically, multi-tier computing systems compensate for cloud computing through task offloading and dispersing computing tasks to multi-tier nodes along the continuum from the cloud to things. …
Thompson Rivers University（汤普森河大学）；University of Luxembourg（卢森堡大学）
In order to meet the extremely heterogeneous requirements of the next generation wireless communication networks, research community is increasingly dependent on using machine learning solutions for real-time decision-making and radio resource management. Traditional machine learning employs fully centralized architecture in which the entire training data is collected at one node e.g., cloud server, that significantly increases the communication overheads and also raises severe privacy concerns. Towards this end, a distributed machine learning paradigm termed as Federated learning (FL) has bee…
Wireless communication systems can be enhanced at the link level, in medium access, and at the network level when transceivers are equipped with full-duplex capability: the transformative ability to simultaneously transmit and receive over the same frequency spectrum. Effective methods to cancel self-interference are required to facilitate full-duplex operation, which we overview herein in the context of traditional radios, along with those in next-generation wireless networks. We highlight advances in self-interference cancellation that leverage machine learning, and we summarize key consider…
Affine Frequency Division Multiplexing (AFDM), a new chirp-based multicarrier waveform for high mobility communications, is introduced here. AFDM is based on discrete affine Fourier transform (DAFT), a generalization of discrete Fourier transform, which is characterized by two parameters that can be adapted to better cope with doubly dispersive channels. First, we derive the explicit input-output relation in the DAFT domain showing the effect of AFDM parameters in the input-output relation. Second, we show how the DAFT parameters underlying AFDM have to be set so that the resulting DAFT domain…
Reconfigurable Antennas for Next-Generation Wireless Communications: Technologies, Prototypes, Architectures, and Signal Processing
School of Engineering, the University of British Columbia（不列颠哥伦比亚大学工程学院）；CEMSE, King Abdullah University of Science and Technology（阿卜杜拉国王科技大学计算机、电气和数学科学与工程学院）
We propose a learning-based method for the joint design of a transmit and receive filter, the constellation geometry and associated bit labeling, as well as a neural network (NN)-based detector. The method maximizes an achievable information rate, while simultaneously satisfying constraints on the adjacent channel leakage ratio (ACLR) and peak-to-average power ratio (PAPR). This allows control of the tradeoff between spectral containment, peak power, and communication rate. Evaluation on an additive white Gaussian noise (AWGN) channel shows significant reduction of ACLR and PAPR compared to a …
Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in shaping the propagation environment. This article presents an alternative application of metasu…
Driven by the unprecedented high throughput and low latency requirements in next-generation wireless networks, this paper introduces an artificial intelligence (AI) enabled framework in which unmanned aerial vehicles (UAVs) use non-orthogonal multiple access (NOMA) and mobile edge computing (MEC) techniques to service terrestrial mobile users (MUs). The proposed framework enables the terrestrial MUs to offload their computational tasks simultaneously, intelligently, and flexibly, thus enhancing their connectivity as well as reducing their transmission latency and their energy consumption. To t…
5G wireless systems will extend mobile communication services beyond mobile telephony, mobile broadband, and massive machine-type communication into new application domains, namely the so-called vertical domains including the smart factory, smart vehicles, smart grid, smart city, etc. Supporting these vertical domains comes with demanding requirements: high-availability, high-reliability, low-latency, and in some cases, high-accuracy positioning. In this survey, we first identify the potential key performance requirements of 5G communication in support of automation in the vertical domains and…
As a core performance metric for green communications, the conventional energy efficiency definition has successfully resolved many issues in the energy efficient wireless network design. In the past several generations of wireless communication networks, the traditional energy efficiency measure plays an important role to guide many energy saving techniques for slow varying traffic profiles. However, for the next generation wireless networks, the traditional energy efficiency fails to capture the traffic and capacity variations of wireless networks in temporal or spatial domains, which is sho…
Comprehensive Review of Advances and Challenges in Next Generation Wireless Networks: From Novel Hardware Technologies to Learning Based Resource Allocation in 6G
School of Electrical and Computer Engineering College of Engineering, University of Tehran（德黑兰大学工程学院电气与计算机工程学院）
Reconfigurable intelligent surface (RIS)-assisted communications is one of the promising candidates for next generation wireless networks by controlling the propagation environment dynamically. In this study, a channel modeling strategy for RIS-assisted wireless networks is introduced in sub-6 GHz bands by considering both far-field and near-field behaviours in transmission. We also proposed an open-source physical channel simulator for sub-6 GHz bands where operating frequency, propagation environment, terminal locations, RIS location and size can be adjusted. It is demonstrated via extensive…
Comprehensive Review of Deep Unfolding Techniques for Next-Generation Wireless Communication Systems
Indian Institute of Technology Guwahati（印度理工学院古瓦哈提分校）；University of Oulu（奥卢大学）；Indian Institute of Technology (BHU) Varanasi（印度理工学院（贝拿勒斯印度教大学）瓦拉纳西分校）；Indian Institute of Technology Indore（印度理工学院印多尔分校）
An innovative approach for the synthesis of inexpensive holographic smart electromagnetic (EM) skins with advanced beamforming features is proposed. The complex multiscale smart skin design is formulated within the Generalized Sheet Transition Condition (GSTC) framework as a combination of a mask-constrained isophoric inverse source problem and a micro-scale susceptibility dyadic optimization. The solution strategy integrates a local search procedure based on the iterative projection technique (IPT) and a System-by-Design (SbD)-based optimization loop for the identification of optimal metasurf…
Next generation wireless networks are expected to be extremely complex due to their massive heterogeneity in terms of the types of network architectures they incorporate, the types and numbers of smart IoT devices they serve, and the types of emerging applications they support. In such large-scale and heterogeneous networks (HetNets), radio resource allocation and management (RRAM) becomes one of the major challenges encountered during system design and deployment. In this context, emerging Deep Reinforcement Learning (DRL) techniques are expected to be one of the main enabling technologies to…
The conventional outage in wireless communication systems is caused by the deterioration of the wireless communication link, i.e., the received signal power is less than the minimum received signal power. Is there a possibility that the outage occurs in wireless communication systems with a good channel state? Based on both communication and heat transfer theories, a power-consumption outage in the wireless communication between millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) base stations (BSs) and smartphones has been modeled and analyzed. Moreover, the total transmiss…
A Fluid Antenna Enabled Physical Layer Key Generation for Next-G Wireless Networks
School of Cyber Science and Engineering, Southeast University（计算机科学与工程学院，东南大学）；Nanjing University of Posts and Telecommunications（南京邮电大学）；National Mobile Communications Research Laboratory, Southeast University（国家移动通信研究实验室，东南大学）；Department of Electronic and Electrical Engineering, University College London（电子与电气工程系，伦敦大学学院）
The Role of ISAC in 6G Networks: Enabling Next-Generation Wireless Systems
Hangzhou International Innovation Institute of Beihang University（北京航空航天大学杭州国际创新研究院）；Southern University of Science and Technology（南方科技大学）；Technische Universität Dortmund（多特蒙德工业大学）；Linköping University（林雪平大学）；Tampere University（坦佩雷大学）；Beijing University of Posts and Telecommunications（北京邮电大学）；School of Automation Science and Electrical Engineering at Beihang University（北京航空航天大学自动化科学与电气工程学院）；State Key Laboratory of Intelligent Manufacturing Systems Technology（智能制造系统技术国家重点实验室）；University of California, San Diego（加州大学圣地亚哥分校）；Université Paris-Saclay（巴黎萨克雷大学）；CNRS（法国国家科学研究中心）；CentraleSupélec（中央理工-高等电力学院）
Free space optics (FSO) refers to optical wireless communications in outdoor environments. The aim of this paper is to analyze the role that FSO is envisaged to play in the creation of next-generation satellite networks. To begin with, the reader is introduced to the types of FSO links and functionalities of a basic FSO system. Next, a comparison of FSO and radio frequency (RF) technologies for inter-satellite links (ISLs) is provided, including a comparison between FSO and RF links when employed between low Earth orbit satellites. After that, the types of FSO or laser ISLs are considered, and…
A Unified Multicarrier Waveform Framework for Next-generation Wireless Networks: Principles, Performance, and Challenges
Sun Yat-sen University（中山大学）；Guangdong Provincial Key Laboratory of Sea-Air-Space Communication, China（中国海空天通信广东省重点实验室）；Nanyang Technological University（南洋理工大学）；AUMOVIO-NTU Corporate Lab（奥莫维欧-南洋理工大学企业实验室）；Southeast University（东南大学）；National Mobile Communications Research Laboratory（移动通信国家重点实验室）；Frontiers Science Center for Mobile Information Communication and Security（移动信息通信与安全前沿科学中心）；Purple Mountain Laboratories（紫金山实验室）；South China University of Technology（华南理工大学）；University of Essex（埃塞克斯大学）
Pukyong National University (PKNU)（釜庆国立大学）；COMSATS University Islamabad (CUI)（COMSATS伊斯兰堡大学）；King Abdulaziz University (KAU)（阿卜杜勒阿齐兹国王大学）；The Chinese University of Hong Kong (CUHK)（香港中文大学）
In this paper, we propose a novel framework for performance optimization in Internet of Things (IoT)-based next-generation wireless sensor networks. In particular, a computationally-convenient system is presented to combat two major research problems in sensor networks. First is the conventionally-tackled resource optimization problem which triggers the drainage of battery at a faster rate within a network. Such drainage promotes inefficient resource usage thereby causing sudden death of the network. The second main bottleneck for such networks is that of data degradation. This is because the …
The intelligent information society, which is highly digitized, intelligence inspired and globally data driven, will be deployed in the next decade. The next 6G wireless communication networks are the key to achieve this grand blueprint, which is expected to connect everything, provide full dimensional wireless coverage and integrate all functions to support full-vertical applications. Recent research reveals that intelligent reflecting surface (IRS) with wireless environment control capability is a promising technology for 6G networks. Specifically, IRS can intelligently control the wavefront…
Terahertz (THz) band communications are envisioned as a key technology for 6G and Beyond. As a fundamental wireless infrastructure, THz communication can boost abundant promising applications. In 2014, our team published two comprehensive roadmaps for the development and progress of THz communication networks [1], [2], which helped the research community to start research on this subject afterwards. The topic of THz communications became very important and appealing to the research community due to 6G wireless systems design and development in recent years. Many papers are getting published co…
Industry 5.0 vision, a step toward the next industrial revolution and enhancement to Industry 4.0, envisioned the new goals of resilient, sustainable, and human-centric approaches in diverse emerging applications, e.g., factories-of-the-future, digital society. The vision seeks to leverage human intelligence and creativity in nexus with intelligent, efficient, and reliable cognitive collaborating robots (cobots) to achieve zero waste, zerodefect, and mass customization-based manufacturing solutions. However, the vision requires the merging of cyber-physical worlds through utilizing Industry 5.…
In this paper, we survey state-of-the-art research outcomes in the burgeoning field of reconfigurable intelligent surface (RIS) in view of its potential for significant performance enhancement for next generation wireless communication networks by means of adapting the propagation environment. Emphasis has been placed on several aspects gating the commercially viability of a future network deployment. Comprehensive summaries are provided for practical hardware design considerations and broad implications of artificial intelligence techniques, so are in-depth outlooks on salient aspects of syst…
