We describe the cavity-enhancement of frequency combs over a wide tuning range of 450-700 nm (> 7900 cm$^{-1}$), covering nearly the entire visible spectrum. Tunable visible frequency combs from a synchronously-pumped optical parametric oscillator are coupled into a 4-mirror, dispersion-managed cavity with a finesse of 600 to 1400. An intracavity absorption path length enhancement greater than 190 is obtained over the entire tuning range, while preserving intracavity spectral bandwidths capable of supporting sub-200 fs pulse durations. These tunable cavity-enhanced frequency combs can find many applications in nonlinear optics and spectroscopy.
We propose and demonstrate a self-coupled microring resonator for resonance splitting by mutual mode coupling of cavity mode and counter-propagating mode in Silicon-on-Insulator platform The resonator is constructed with a self-coupling region that can excite counter-propagating mode. We experimentally study the effect of self-coupling on the resonance splitting, resonance extinction, and quality-factor evolution and stability. Based on the coupling, we achieve 72% of FSR splitting for a cavity with FSR 2.1 nm with < 5% variation in the cavity quality factor. The self-coupled resonance splitti…
An invisible cavity is an open resonant device that confines a localized field without producing any scattering outside of the device volume. By exploiting the scatter-less property of such device, it is possible to nest two invisible cavities, as the outer cavity would simply not notice the presence of the inner one, regardless of their relative position. As a result, the position of the inner cavity becomes a means to easily control the field localized inside the cavity and its quality factor. In this paper, we discuss the properties of nested invisible cavities as a simple method to achieve…
We report on the spectral properties of a diode laser with a tunable external cavity in integrated optics. Even though the external cavity is short compared to other small-bandwidth external cavity lasers, the spectral bandwidth of this tunable laser is as small as 25 kHz (FWHM), at a side-mode suppression ratio (SMSR) of 50 dB. Our laser is also able to access preset wavelengths in as little as 200 us and able to tune over the full telecom C-band (1530 nm - 1565 nm).
We report a novel approach to the design and implementation of a tunable cavity on an optical nanofiber (ONF). The key point is to create a composite photonic crystal cavity (CPCC), by combining an ONF and a chirped period defect mode grating. Using numerical simulations we design the CPCC with low scattering loss while tuning the cavity resonance wavelength of \pm10 nm around the designed wavelength. We experimentally demonstrate the tunability of the CPCC, showing good agreement with the simulation results. Our results lay the foundation for a versatile platform for ONF cavity-quantum-electr…
Asymmetric Mach-Zehnder interferometers (AMZIs) can, in principle, enable continuous wavelength tuning of a laser when used as an intra-cavity filter. Their simplicity and good compatibility with generic foundry platforms are major advantages. However, the difficulty to develop a well-defined and robust control strategy is an important drawback which restricts the use-cases of these tunable lasers. Here, we make an in-depth investigation of the tunability properties of a laser including a single-stage AMZI in its cavity. We find that due to imperfections of Electro-Optic Phase Modulators (EOPM…
A tunable nanoscale "zipper" laser cavity, formed from two doubly clamped photonic crystal nanobeams, is demonstrated. Pulsed, room temperature, optically pumped lasing action at a wavelength of 1.3 micron is observed for cavities formed in a thin membrane containing InAsP/GaInAsP quantum-wells. Metal electrodes are deposited on the ends of the nanobeams to allow for micro-electro-mechanical actuation. Electrostatic tuning and modulation of the laser wavelength is demonstrated at a rate of 0.25nm/V^2 and a frequency as high as 6.7MHz, respectively.
A continuously tunable titanium:sapphire (Ti:Sa) laser self-seeded by an extended grating cavity was demonstrated and characterized. By inserting a partially reflecting mirror inside the cavity of a classic single-cavity grating laser, two oscillators are created: a broadband power oscillator, and a narrowband oscillator with a prism beam expander and a diffraction grating in Littrow configuration. By coupling the grating cavity oscillation into the power oscillator, a power-enhanced narrow-linewidth laser oscillation is achieved. Compared to the classic grating laser, this simple modification…
Designing and realizing switchable cavities at the infrared and THz frequencies is crucial for achieving novel integrated photonic circuits. Semiconductors like SiC support the propagation of surface phonon polaritons with the ability to tune carrier concentrations via doping. In this manuscript, we investigate the tunability of coupled surface-phonon-plasmon polariton waves inside an elliptical cavity build from a metal-semiconductor heterostructure. We theoretically study the impact of the extra n- and p-carrier doping on the resonant modes of the cavity and we show that for certain cavity m…
We demonstrate a technique for locking the frequency of a tunable diode laser to a ring-cavity resonator. The resonator is stabilized to a diode laser which is in turn locked to an atomic transition, thus giving it absolute frequency calibration. The ring-cavity design has the principal advantage that there is no feedback destabilization of the laser. The cavity has a free-spectral range of 1.3 GHz and $Q$ of about 35, which gives robust locking of the laser. The locked laser is able to track large scans of the cavity.
Light responsive devices employing molecular photo-switches are interesting for displays and dynamic light filtering. In this work, polymeric microcavities embedding a layer of photochromic compound have been studied by means of the transfer matrix method. Different polymers, such as poly vinyl carbazole, poly styrene and cellulose acetate, have been used. A microcavity that includes random one-dimensional photonic structures sandwiching the photochromic layer has also been studied. Propagation of light pulses through the microcavities has been analysed.
Extraordinary transmission through subwavelength metallic apertures has been extensively studied and demonstrated. At resonance, the coupling between surface plasmons on both surfaces of the metallic film tunnels the photon from the one side to the other through the subwavelength aperture with small transmission efficiency based on the metals dielectric parameters and aperture geometrical dimensions. Here, we report a completely different form of extraordinary transmission, where the two subwavelength complementary apertures when coupled with an optical cavity induce about 100% extraordinary t…
We theoretically investigate coupling interaction between molecule excitons and whispering gallery modes (WGMs) that approaches the limit of single exciton strong coupling in hyperbolic metamaterial (HMM) cavity, composed of a dielectric core wrapped by several stacks of alternative layers of metal and dielectric. We demonstrate that associated with the excitation of the whispering gallery mode, the electric fields with resonance wavelengths that are much larger than the cavity size can be highly localized within a dielectric layer, leading to extremely small mode volumes. By using temporal co…
We present an atom-chip-based realization of quantum cavity optomechanics with cold atoms localized within a Fabry-Perot cavity. Effective sub-wavelength positioning of the atomic ensemble allows for tuning the linear and quadratic optomechanical coupling parameters, varying the sensitivity to the displacement and strain of a compressible gaseous cantilever. We observe effects of such tuning on cavity optical nonlinearity and optomechanical frequency shifts, providing their first characterization in the quadratic-coupling regime.
In this work we analyze the temporal dynamics of a system comprising an optical cavity filled with a nonlinear Kerr medium, whose frequency is allowed to change during time evolution. By exactly solving the corresponding time-dependent anharmonic-oscillator Hamiltonian, we demonstrate that squeezed coherent-state superpositions can be generated within the optical cavity. Moreover, we show that the squeezing degree of the produced states may be tuned by properly controlling the frequency shift of the cavity, a feature that might lead to interesting studies in the field of quantum state engineer…
A watt-level ultrahigh optical signal-to-noise ratio (OSNR) single-longitudinal-mode (SLM) tunable Brillouin fiber laser (BFL) has been demonstrated.By optimizing the length of the single mode fiber (SMF) cavity at 11m and its output ratio at sixty percent, 1.04 W output power, as well as stable SLM operation is obtained at 2.24 W pump power. The single pass cavity BFL has the advantage that Brillouin pump frequency doesn't need to match the cavity mode, thus the stability is greatly improved. As only SMF is used in the cavity, the operate wavelength can be tunable without the restriction from…
Tunable optical material properties enable novel applications in both versatile metamaterials and photonic components including optical sources and modulators. Transparent conductive oxides (TCOs) are able to highly tune their optical properties with applied bias via altering their free carrier concentration and hence plasma dispersion. The TCO material indium tin oxide (ITO) exhibits unity-strong index changes, and epsilon-near-zero behavior. However, with such tuning the corresponding high optical losses, originating from the fundamental Kramers-Kronig relations, result in low cavity finesse…
Presented here is the development and demonstration of a tunable cavity-enhanced terahertz frequency-domain optical Hall effect technique. The cavity consists of at least one fixed and one tunable Fabry-Pérot resonator. The approach is suitable for enhancement of the optical signatures produced by the optical Hall effect in semi-transparent conductive layer structures with plane parallel interfaces. The physical principle is the constructive interference of electric field components that undergo multiple optical Hall effect induced polarization rotations upon multiple light passages through th…
Integrating an absorbing thin film into a resonant cavity is the most practical way to achieve perfect absorption of light at a selected wavelength in the mid-to-far infrared, as required to target blackbody radiation or molecular fingerprints. The cavity is designed to resonate and enable perfect absorption in the film at the chosen wavelength λ. However, in current state-of-the-art designs, a still large absorbing film thickness (λ/50) is needed and tuning the perfect absorption wavelength over a broad range requires changing the cavity materials. Here, we introduce a new resonant cavity con…
We present an experimental study of an optomechanical system formed by a vibrating thin semi-transparent membrane within a high-finesse optical cavity. We show that the coupling between the optical cavity modes and the vibrational modes of the membrane can be tuned by varying the membrane position and orientation. In particular we demonstrate a large quadratic dispersive optomechanical coupling in correspondence with avoided crossings between optical cavity modes weakly coupled by scattering at the membrane surface. The experimental results are well explained by a first order perturbation trea…
A tunable high resolution frequency reference is constructed using the narrowed cavity-linewidth by the optical pumping-assisted V-type electromagnetically induced transparency (EIT). At room temperature, the optical pumping effect will increase the transparency for the V-type EIT and therefore the cavity-linewidth can be narrowed apparently. For the seven EITs observed in our previous study, cavity-linewidth narrowing is observed in all of them. More importantly, we find that the cavity-linewidth can keep at 1.2MHz in a wide frequency range of 100MHz by utilizing the central EIT. This propert…
We report here the realization and commissioning of an experiment dedicated to the study of the optical properties of light matter hybrids constituted of crystalline samples embedded in an optical cavity. The experimental assembly developed offers the unique opportunity to study the weak and strong coupling regime between a tunable optical cavity in cryogenic environment and low energy degrees of freedom such as phonons, magnons or charge fluctuations. We describe here the setup developed which allows the positioning of crystalline samples in an optical cavity of different quality factor, the …
We have implemented highly stable and tunable frequency references using optical high finesse cavities which incorporate a piezo actuator. As piezo material we used ceramic PZT, crystalline quartz, or PZN-PT single crystals. Lasers locked to these cavities show a relative frequency stability better than 1 x 10^{-14}, which is most likely not limited by the piezo actuators. The piezo cavities can be electrically tuned over more than one free spectral range (> 1.5 GHz) with only a minor decrease in frequency stability. Furthermore, we present a novel cavity design, where the piezo actuator is pr…
Tunable WS$_2$ Micro-Dome Open Cavity Single Photon Source
Carl von Ossietzky Universität Oldenburg（奥尔登堡卡尔·冯·奥西茨基大学）；Sapienza University of Rome（罗马智慧大学）；Friedrich Schiller University Jena（耶拿弗里德里希·席勒大学）；National Institute for Materials Science（国立材料研究所）；National Research Council（国家研究委员会）
We have demonstrated a frequency-stabilized tunable 318.6 nm ultraviolet (UV) laser system for the single-photon 6S1/2 - nP (n = 70 ~ 100) Rydberg excitation of cesium atoms. The 637.2 nm laser produced by single-pass sum frequency generation from two infrared fiber lasers is offset locked to a high-finesse ultra-low expansion (ULE) optical cavity placed in ultra-high vacuum using the electronic sideband locking technique. The generated 318.6 nm UV laser via cavity-enhanced second-harmonic generation can be continuously tuned over 4 GHz by indirectly changing modulation frequency on the electr…
Cavity-tunable Pseudospin-Hall Topology and Edge Transport
Tsinghua University Shenzhen International Graduate School（清华大学深圳国际研究生院）；Beijing Institute of Technology, Zhuhai（北京理工大学珠海校区）；Southern University of Science and Technology（南方科技大学）
Cavity-polaritons in semiconductor photonic structures have emerged as a test bed for exploring non-equilibrium dynamics of quantum fluids in an integrated solid-state device setting. Several recent experiments demonstrated the potential of these systems for revealing quantum many-body physics in driven-dissipative systems. So far, all experiments have relied on fully integrated devices with little to no flexibility for modification of device properties. Here, we present a novel approach for realizing confined cavity-polaritons that enables in-situ tuning of the cavity length and thereby of th…
Solid-state microcavities combining ultra-small mode volume, wide-range resonance frequency tuning, as well as lossless coupling to a single mode fibre are integral tools for nanophotonics and quantum networks. We developed an integrated system providing all of these three indispensable properties. It consists of a nanofibre Bragg cavity (NFBC) with the mode volume of under 1 micro cubic meter and repeatable tuning capability over more than 20 nm at visible wavelengths. In order to demonstrate quantum light-matter interaction, we establish coupling of quantum dots to our tunable NFBC and achie…
We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achieved without sacrificing either performance or tunability, through the combination of a stiff mechanical design, passive vibration isolation, and an active Pound-Drever-Hall feedback lock incorporating …
We present a novel technique to phase-lock two lasers with controllable frequency difference. In our setup, one sideband of a current modulated Vertical-Cavity Surface-Emitting Laser (VCSEL) is phase locked to the master laser by injection seeding, while another sideband of the VCSEL is used to phase lock the slave laser. The slave laser is therefore locked in phase with the master laser, with a frequency difference tunable up to about 35 GHz. The sideband suppression rate of the slave laser is more than 30dB at 30 uW seed power. The heterodyne spectrum between master and slave has a linewidth…
Tunable low-phase-noise terahertz synthesis using a fiber-interferometer-referenced optical frequency comb and an EDFA-integrated Vernier cavity
Graduate School of Sciences and Technology for Innovation, Tokushima University（德岛大学科学技术创新研究生院）；Department of Physics, Toho University（东海大学物理系）；Institute of Post-LED Photonics (pLED), Tokushima University（德岛大学后LED光子学研究所）；Institute of Photonics and Human Health Frontier (IPHF), Tokushima University（德岛大学光子学与人类健康前沿研究所）；Sevensix Inc.（Sevensix公司）
We study the optical cooling of the resonator mirror in a cavity-optomechanical system that contains an optical gain medium. We find that the optical damping rate is vanishingly small for an incoherently pumped laser above threshold. In the presence of an external coherent drive however, the optical damping rate can be enhanced substantially with respect to that of a passive cavity. We show that the strength of the incoherent pump provides a conduit to tune the damping rate and the minimum attainable phonon number with the same radiation pressure force, and the latter can be lowered from that …
We study the phase controlled transmission properties in a compound system consisting of a 3D copper cavity and an yttrium iron garnet (YIG) sphere. By tuning the relative phase of the magnon pumping and cavity probe tones, constructive and destructive interferences occur periodically, which strongly modify both the cavity field transmission spectra and the group delay of light. Moreover, the tunable amplitude ratio between pump-probe tones allows us to further improve the signal absorption or amplification, accompanied by either significantly enhanced optical advance or delay. Both the phase …
Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. External feedback circuits can be efficiently implemented using low-loss silicon nitride (Si$_{3}$N$_{4}$) waveguides, which do not suffer from two-photon absorption and can thus handle much higher power levels than conventional silicon photonics. However, co-integrating III-V-based gain elements with tunable external feedback circuits in chip-sca…
We demonstrate spectrally-tunable Fabry-Perot bandpass filters operating across the MWIR by utilizing the phase-change material GeSbTe (GST) as a tunable cavity medium between two (Ge:Si) distributed Bragg reflectors. The induced refractive index modulation of GST increases the cavity's optical path length, red-shifting the passband. Our filters have spectral-tunability of ~300 nm, transmission efficiencies of 60-75% and narrowband FWHMs of 50-65 nm (Q-factor ~70-90). We further show multispectral thermal imaging and gas sensing. By matching the filter's initial passband to a CO$_{2}$ vibratio…
A solid state emitter coupled to a photonic crystal cavity exhibits increased photon emission into a single frequency mode. However, current designs for photonic crystal cavities coupled to quantum emitters have three main problems: emitters are placed near surfaces that can degrade their optical properties, the cavity fluorescence cannot be collected into a single useful mode for further routing, and post-fabrication tuning is not currently possible in a stable and reversible manner for each node individually. In this paper, we introduce a hybrid cavity design with minimal fabrication of the …
The spatial modes of light have grasped great research interests because of its great potentials in optical communications, optical manipulation and trapping, optical metrology and quantum information processing. Here we report on generating of photon pairs in Hermite-Gaussian (HG) mode in a type-I optical parametric oscillator (OPO) operated far below threshold. The bandwidths of the photon pairs are 11.4 MHz and 20.8MHz for two different HG modes respectively, which is capable to be stored in cold Rubidium atomic ensembles. From correlation measurements, non-classical properties of HG modes …
Microcavities have long been recognized as indispensable elements in quantum photonic research due to their usefulness for enhanced light extraction and light-matter interaction. A conventional high-Q cavity structure typically allows only a single optical transition to be tuned into resonance with a specific mode. The transition to a more advanced double-cavity structure, however, introduces new and interesting possibilities such as enhancing two spectrally close optical transitions at the same time with two distinct cavity modes. Here, we investigate a cavity structure composed of a monolith…
Recently, a tunable bandwidth white light cavity (WLC) was demonstrated by using an anomalously dispersive intra-cavity medium to adjust a cavity linewidth without reducing the cavity buildup factor [G.S. Pati et al., Phys. Rev. Lett. 99, 133601 (2007)]. In this paper, we show theoretically how such a WLC can be used to realize a distortion-free delay system for a data pulse. The system consists of two WLCs placed in series. Once the pulse has passed through them, the fast-light media in both WLCs are deactivated, so that each of these now acts as a very high reflectivity mirror. The data puls…
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions that can be independently mode-locked. Spectral overlap of the two pulse trains is achieved outside the laser cavity by amplifying the 1030-nm pulses and broadening them in a nonlinear fiber. Spatial…
Pulse generation often requires a stabilized cavity and its corresponding mode structure for initial phase-locking. Contrastingly, modeless cavity-free random lasers provide new possibilities for high quantum efficiency lasing that could potentially be widely tunable spectrally and temporally. Pulse generation in random lasers, however, has remained elusive since the discovery of modeless gain lasing. Here we report coherent pulse generation with modeless random lasers based on the unique polarization selectivity and broadband saturable absorption of monolayer graphene. Simultaneous temporal c…
Advances in high-resolution laser spectroscopy have enabled many scientific breakthroughs in physics, chemistry, biology and astronomy. Optical frequency combs have pushed measurement limits with ultrahigh-frequency accuracy and fast-measurement speed while tunable diode laser spectroscopy is used in scenarios that require high power and continuous spectral coverage. Despite these advantages of tunable diode laser spectroscopy, it is challenging to precisely determine the instantaneous frequency of the laser because of fluctuations in the scan speed. Here we demonstrate a simple spectroscopy s…
We study a system comprising of a double quantum well embedded in a micropillar optical cavity, where strong coupling between a direct exciton, indirect exciton, and cavity photon is achieved. We show that the resulting hybrid quasiparticles - dipolaritons - can induce strong photon correlations and lead to anti-bunched behaviour of the cavity output field. The origin of the observed single photon emission is attributed to unconventional photon blockade. Moreover, we find that the second-order equal time correlation function $g^{(2)}(0)$ can be tuned over a large range using an electric field …
We have developed and characterised a stable, narrow linewidth external-cavity laser (ECL) tunable over 100 nm around 1080 nm, using a single-angled-facet gain chip. We propose the ECL as a low-cost, high-performance alternative to fibre and diode lasers in this wavelength range and demonstrate its capability through the spectroscopy of metastable helium. Within the coarse tuning range, the wavelength can be continuously tuned over 30 pm (7.8 GHz) without mode-hopping and modulated with bandwidths up to 3 kHz (piezo) and 37(3) kHz (current). The spectral linewidth of the free-running ECL was m…
Second-harmonic (SH) generation is tremendously important for nonlinear sensing, microscopy and communication system. One of the great challenges of current designs is to enhance the SH signal and simultaneously tune its radiation direction with a high directivity. In contrast to the linear plasmonic scattering dominated by a bulk dipolar mode, a complex surface-induced multipolar source at the doubled frequency sets a fundamental limit to control the SH radiation from metallic nanostructures. In this work, we harness plasmonic hybridization mechanism together with a special selection rule gov…
We present the optical and mechanical design of a mechanically compliant quasi-two-dimensional photonic crystal cavity formed from thin-film silicon in which a pair of linear nanoscale slots are used to create two coupled high-$Q$ optical resonances. The optical cavity supermodes, whose frequencies are designed to lie in the $1500$~nm wavelength band, are shown to interact strongly with mechanical resonances of the structure whose frequencies range from a few MHz to a few GHz. Depending upon the symmetry of the mechanical modes and the symmetry of the slot sizes, we show that the optomechanica…
We present the design, fabrication, and characterization of a planar silicon photonic crystal cavity in which large position-squared optomechanical coupling is realized. The device consists of a double-slotted photonic crystal structure in which motion of a central beam mode couples to two high-Q optical modes localized around each slot. Electrostatic tuning of the structure is used to controllably hybridize the optical modes into supermodes which couple in a quadratic fashion to the motion of the beam. From independent measurements of the anti-crossing of the optical modes and of the optical …
