arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2001.09619eess.SYcs.LGcs.SYstat.APstat.ML
收藏

基于数据驱动的表面贴装回流焊元件漂移预测模型

Data-Driven Prediction Model of Components Shift during Reflow Process in Surface Mount Technology

State University of New York(纽约州立大学)

Irandokht Parviziomran, Shun Cao, Krishnaswami Srihari, Daehan Won

摘要:

在表面贴装技术(SMT)中,在回流焊过程中,安装在焊盘上的元件会发生移动。这种能力被称为自对准,并且是熔融焊膏的流体动力学行为的结果。这种能力在SMT中至关重要,因为不准确的自对准会导致诸如悬垂、墓碑等缺陷,而另一方面,它可以使组件能够在期望位置上或附近完美地自组装。本研究的目的是开发一种机器学习模型,预测回流期间X和Y方向以及旋转的组件移动。我们的研究包括两个步骤:(1)研究实验数据,以揭示自对准与各种因素之间的关系,包括组件的几何形状,焊盘的几何形状等。(2)先进的机器学习预测模型应用于预测的距离和方向的组件移动使用支持向量回归(SVR),神经网络(NN)和随机森林回归(RFR)。因此,RFR可以预测组件移位,平均拟合度为99%,99%和96%,平均预测误差为13.47(um),12.02(um)和1.52(deg.)。分别用于x、y和旋转方向上的分量移位。这一改进提供了在拾取和放置机器中的参数优化的未来能力,以控制最佳放置位置并最小化由自对准引起的固有缺陷。

英文摘要:

In surface mount technology (SMT), mounted components on soldered pads are subject to move during reflow process. This capability is known as self-alignment and is the result of fluid dynamic behaviour of molten solder paste. This capability is critical in SMT because inaccurate self-alignment causes defects such as overhanging, tombstoning, etc. while on the other side, it can enable components to be perfectly self-assembled on or near the desire position. The aim of this study is to develop a machine learning model that predicts the components movement during reflow in x and y-directions as well as rotation. Our study is composed of two steps: (1) experimental data are studied to reveal the relationships between self-alignment and various factors including component geometry, pad geometry, etc. (2) advanced machine learning prediction models are applied to predict the distance and the direction of components shift using support vector regression (SVR), neural network (NN), and random forest regression (RFR). As a result, RFR can predict components shift with the average fitness of 99%, 99%, and 96% and with average prediction error of 13.47 (um), 12.02 (um), and 1.52 (deg.) for component shift in x, y, and rotational directions, respectively. This enhancement provides the future capability of the parameters' optimization in the pick and placement machine to control the best placement location and minimize the intrinsic defects caused by the self-alignment.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑