先进表面贴装技术中具有自对准效应的无源贴片元件放置的Optimization
Optimization of Passive Chip Components Placement with Self-Alignment Effect for Advanced Surface Mounting Technology
摘要:
表面贴装技术(SMT)是电子封装中的一种增强方法,其中电子元件直接放置在焊接的印刷电路板(PCB)上,并以回流焊接工艺为目的永久地附着在PCB上。在回流过程中,一旦沉积的焊膏开始熔化,电子元件就会朝着实现最高对称性的方向移动。这种运动被称为自对准,因为可以纠正潜在的安装不对准。在这项研究中,两个值得注意的机器学习算法,包括支持向量回归(SVR)和随机森林回归(RFR)被提出作为预测技术(1)诊断元件自对准,沉积的锡膏状态和放置加工参数之间的关系,(2)在进入回流焊工艺之前预测PCB上的最终元件在x,y和旋转方向上的位置。基于预测结果,建立了一个非线性最优化模型(NLP)来优化初始阶段的布局参数。因此,RFR在预测模型适应度和误差方面优于其他模型。针对6个样本运行该最优化模型,其中从理想位置(即,焊盘中心)的轮廓为25.57(μm)。
英文摘要:
Surface mount technology (SMT) is an enhanced method in electronic packaging in which electronic components are placed directly on soldered printing circuit board (PCB) and are permanently attached on PCB with the aim of reflow soldering process. During reflow process, once deposited solder pastes start melting, electronic components move in a direction that achieve their highest symmetry. This motion is known as self-alignment since can correct potential mounting misalignment. In this study, two noticeable machine learning algorithms, including support vector regression (SVR) and random forest regression (RFR) are proposed as a prediction technique to (1) diagnose the relation among component self-alignment, deposited solder paste status and placement machining parameters, (2) predict the final component position on PCB in x, y, and rotational directions before entering in the reflow process. Based on the prediction result, a non-linear optimization model (NLP) is developed to optimize placement parameters at initial stage. Resultantly, RFR outperforms in terms of prediction model fitness and error. The optimization model is run for 6 samples in which the minimum Euclidean distance from component position after reflow process from ideal position (i.e., the center of pads) is outlined as 25.57 (μm) regarding defined boundaries in model.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。