We consider a communication cell comprised of Internet-of-Things (IoT) nodes transmitting to a common Access Point (AP). The nodes in the cell are assumed to generate data samples periodically, which are to be transmitted to the AP. The AP hosts a machine learning model, such as a neural network, which is trained on the received data samples to make accurate inferences. We address the following tradeoff: The more often the IoT nodes transmit, the higher the accuracy of the inference made by the AP, but also the higher the energy expenditure at the IoT nodes. We propose a data filtering scheme employed by the IoT nodes, which we refer to as distributed importance filtering in order to filter out redundant data samples already at the IoT nodes. The IoT nodes do not have large on-device machine learning models and the data filtering scheme operates under periodic instructions from the model placed at the AP. The proposed scheme is evaluated using neural networks on a benchmark machine vision dataset, as well as in two practical scenarios: leakage detection in water distribution networks and air-pollution detection in urban areas. The results show that the proposed scheme offers significant benefits in terms of network longevity as it preserves the devices' resources, whilst maintaining high inference accuracy. Our approach reduces the the computational complexity for training the model and obviates the need for data pre-processing, which makes it highly applicable in practical IoT scenarios.
Wireless powered backscatter communications (WPBC) is capable of implementing ultra-low-power communication, thus promising in the Internet of Things (IoT) networks. In practice, however, it is challenging to apply WPBC in large-scale IoT networks because of its short communication range. To address this challenge, this paper exploits an unmanned ground vehicle (UGV) to assist WPBC in large-scale IoT networks. In particular, we investigate the joint design of network planning and dynamic resource allocation of the access point (AP), tag reader, and UGV to minimize the total energy consumption.…
This paper investigates a full-duplex orthogonal-frequency-division multiple access (OFDMA) based multiple unmanned aerial vehicles (UAVs)-enabled wireless-powered Internet-of-Things (IoT) networks. In this paper, a swarm of UAVs is first deployed in three dimensions (3D) to simultaneously charge all devices, i.e., a downlink (DL) charging period, and then flies to new locations within this area to collect information from scheduled devices in several epochs via OFDMA due to potential limited number of channels available in Narrow Band IoT, i.e., an uplink (UL) communication period. To maximiz…
We investigate the long-term scheduling and power control scheme for a wirelessly powered cell-free Internet of Things (IoT) network which consists of distributed access points (APs) and large number of sensors. In each time slot, a subset of sensors are scheduled for uplink data transmission or downlink power transfer. Through asymptotic analysis, we obtain closedform expressions for the harvested energy and the achievable rates that are independent of random pilots. Then, using these expressions, we formulate a long-term scheduling and power control problem to maximize the minimum time avera…
In this paper, we propose a unified SWIPT signal and its architecture design in order to take advantage of both single tone and multi-tone signaling by adjusting only the power allocation ratio of a unified signal. For this, we design a novel unified and integrated receiver architecture for the proposed unified SWIPT signaling, which consumes low power with an envelope detection. To relieve the computational complexity of the receiver, we propose an adaptive control algorithm by which the transmitter adjusts the communication mode through temporal convolutional network (TCN) based asymmetric p…
The growing popularity of Internet of Things (IoT) applications brings new challenges to the wireless communication community. Numerous smart devices and sensors within IoT will generate a massive amount of short data packets. Future wireless transmission systems need to support the reliable transmission of such small data with extremely high energy efficiency. In this article, we introduce a novel data-oriented approach for characterizing the energy efficiency of wireless transmission strategies for IoT applications. Specifically, we present new energy efficiency performance limits targeting …
This paper proposes and investigates an overlay spectrum sharing system in conjunction with the simultaneous wireless information and power transfer (SWIPT) to enable communications for the Internet of Things (IoT) applications. Considered is a cooperative cognitive radio network, where two IoT devices (IoDs) exchange their information and also provide relay assistance to a pair of primary users (PUs). Different from most existing works, in this paper, both IoDs can harvest energy from the radio-frequency (RF) signals received from the PUs. By utilizing the harvested energy, they provide relay…
Power supply for Internet of Things (IoT) devices is one of the bottlenecks in IoT development. To provide perpetual power supply to IoT devices, resonant beam charging (RBC) is a promising safe, long-range and high-power wireless power transfer solution. How long distance can RBC reach and how much power can RBC transfer? In this paper, we analyze the RBC's consistent and steady operational conditions, which determine the maximum power transmission distance. Moreover, we study the power transmission efficiency within the operational distance, which determines the deliverable power through the…
In this paper, we investigate and analyze energy recycling for a reconfigurable intelligent surface (RIS)-aided wireless-powered communication network. As opposed to the existing works where the energy harvested by Internet of things (IoT) devices only come from the power station, IoT devices are also allowed to recycle energy from other IoT devices. In particular, we propose group switching- and user switching-based protocols with time-division multiple access to evaluate the impact of energy recycling on system performance. Two different optimization problems are respectively formulated for …
Considering ubiquitous connectivity and advanced information processing capability, huge amount of low-power IoT devices are deployed nowadays and the maintenance of those devices which includes firmware/software updates and recharging the units has become a bottleneck for IoT systems. For addressing limited battery constraints, wireless power transfer is a promising approach such that it does not require any physical link between energy harvester and power transfer. Furthermore, combining wireless power transfer with information transmission has become more appealing. In the systems that appl…
Wireless data aggregation (WDA), referring to aggregating data distributed at devices (e.g., sensors and smartphone), is a common operation in 5G-and-beyond machine-type communications to support Internet-of-Things (IoT), which lays the foundation for diversified applications such as distributed sensing, learning, and control. Conventional WDA techniques that are designed based on a separated-communication-and-computation principle encounter difficulty in accommodating the massive access under the limited radio resource and stringent latency constraints imposed by emerging applications (e.g, a…
The 6G wireless technology is visualized to revolutionize multiple customer services with the Internet of Things (IoT), thereby contributing to a ubiquitous intelligent society comprising autonomous systems. In this chapter, we conduct a detailed survey on the IoT networks with 6G wireless networks and investigate the trending possibilities provided by the 6G technology within the IoT networks and the related utilization; Firstly, we detail the breakthrough IoT technologies and the technological drivers which are anticipated to strengthen IoT networks in future. Next, we present the relevant u…
This paper studies an unmanned aerial vehicle (UAV)-enabled two-user interference channel for wireless powered communication networks (WPCNs), in which two UAVs wirelessly charge two low-power Internet-of-things (IoT)-devices on the ground and collect information from them. We consider two scenarios when both UAVs cooperate in energy transmission and/or information reception via interference coordination and coordinated multi-point (CoMP), respectively. For both scenarios, the UAVs' controllable mobility is exploited via trajectory design to not only enhance the wireless power transfer (WPT) e…
In this paper, we design a novel high-throughput random access scheme for an indoor optical wireless communication (OWC) massive Internet of Things (IoT) scenario. Due to the large density of both IoT devices and OWC access points (APs), we base the proposed scheme on multi-receiver coded slotted ALOHA. In this scenario, collisions at APs are resolved by a centralized interference cancellation decoder that may exploit both spatial and temporal diversity. By applying adaptive control of each OWC AP field of view (FOV), the proposed system is able to dynamically adapt to different IoT device act…
Internet-of-Things (IoT) technology is envisioned to enable a variety of real-time applications by interconnecting billions of sensors/devices deployed to observe some random physical processes. These IoT devices rely on low-power wide-area wireless connectivity for transmitting, mostly fixed- but small-size, status updates of their associated random processes. The cellular networks are seen as a natural candidate for providing reliable wireless connectivity to IoT devices. However, the conventional orthogonal multiple access (OMA) to these massive number of devices is expected to degrade the …
This paper describes the principles and implementation results of reinforcement learning algorithms on IoT devices for radio collision mitigation in ISM unlicensed bands. Learning is here used to improve both the IoT network capability to support a larger number of objects as well as the autonomy of IoT devices. We first illustrate the efficiency of the proposed approach in a proof-of-concept based on USRP software radio platforms operating on real radio signals. It shows how collisions with other RF signals present in the ISM band are diminished for a given IoT device. Then we describe the fi…
The Internet of Things (IoT) will soon be omnipresent and billions of sensors and actuators will support our industries and well-being. IoT devices are embedded systems that are connected using wireless technology for most of the cases. The availability of the wireless network serving the IoT, the privacy, integrity, and trustworthiness of the data are of critical importance, since IoT will drive businesses and personal decisions. This paper proposes a new approach in the wireless security domain that leverages advanced wireless technology and the emergence of the unmanned aerial system or veh…
Queen’s University Belfast（贝尔法斯特女王大学）；HoChiMinh City University of Technology and Education（胡志明市工业与教育大学）；Princeton University（普林斯顿大学）
Many of the devices used in Internet-of-Things (IoT) applications are energy-limited, and thus supplying energy while maintaining seamless connectivity for IoT devices is of considerable importance. In this context, we propose a simultaneous wireless power transfer and information transmission scheme for IoT devices with support from reconfigurable intelligent surface (RIS)-aided unmanned aerial vehicle (UAV) communications. In particular, in a first phase, IoT devices harvest energy from the UAV through wireless power transfer; and then in a second phase, the UAV collects data from the IoT de…
The Internet of Things (IoT) is rapidly becoming an integral part of our life and also multiple industries. We expect to see the number of IoT connected devices explosively grows and will reach hundreds of billions during the next few years. To support such a massive connectivity, various wireless technologies are investigated. In this survey, we provide a broad view of the existing wireless IoT connectivity technologies and discuss several new emerging technologies and solutions that can be effectively used to enable massive connectivity for IoT. In particular, we categorize the existing wire…
The requirements in terms of service quality such as data rate, latency, power consumption, number of connectivity of future fifth-generation (5G) communication is very high. Moreover, in Internet of Things (IoT) requires massive connectivity. Optical wireless communication (OWC) technologies such as visible light communication, light fidelity, optical camera communication, and free space optical communication can effectively serve for the successful deployment of 5G and IoT. This paper clearly presents the contributions of OWC networks for 5G and IoT solutions.
The increase of cyberattacks using IoT devices has exposed the vulnerabilities in the infrastructures that make up the IoT and have shown how small devices can affect networks and services functioning. This paper presents a review of the vulnerabilities of the wireless technologies that bear the IoT and assessing the experiences in implementing wireless attacks targeting the Internet of Things using Software-Defined Radio (SDR) technologies. A systematic literature review was conducted. The types of vulnerabilities and attacks that can affect the wireless technologies that stand the IoT ecosys…
Royal Institute of Technology (KTH)（皇家理工学院（KTH））；Princeton University（普林斯顿大学）
To leverage massive distributed data and computation resources, machine learning in the network edge is considered to be a promising technique especially for large-scale model training. Federated learning (FL), as a paradigm of collaborative learning techniques, has obtained increasing research attention with the benefits of communication efficiency and improved data privacy. Due to the lossy communication channels and limited communication resources (e.g., bandwidth and power), it is of interest to investigate fast responding and accurate FL schemes over wireless systems. Hence, we investigat…
Jožef Stefan Institute（约瑟夫·斯特凡研究所）；Jožef Stefan International Postgraduate School（约瑟夫·斯特凡国际研究生院）；Bitlis Eren University（比特利斯·埃伦大学）；University of Ljubljana（卢布尔雅那大学）
After decades of research, the Internet of Things (IoT) is finally permeating real-life and helps improve the efficiency of infrastructures and processes as well as our health. As a massive number of IoT devices are deployed, they naturally incur great operational costs to ensure intended operations. To effectively handle such intended operations in massive IoT networks, automatic detection of malfunctioning, namely anomaly detection, becomes a critical but challenging task. In this paper, motivated by a real-world experimental IoT deployment, we introduce four types of wireless network anomal…
Resonant Beam Charging (RBC) is the Wireless Power Transfer (WPT) technology, which can provide high-power, long-distance, mobile, and safe wireless charging for Internet of Things (IoT) devices. Supporting multiple IoT devices charging simultaneously is a significant feature of the RBC system. To optimize the multi-user charging performance, the transmitting power should be scheduled for charging all IoT devices simultaneously. In order to keep all IoT devices working as long as possible for fairness, we propose the First Access First Charge (FAFC) scheduling algorithm. Then, we formulate the…
Billions of everyday objects could become part of the Internet of Things (IoT) by augmentation with low-cost, long-range, maintenance-free wireless sensors. Radio Frequency Identification (RFID) is a low-cost wireless technology that could enable this vision, but it is constrained by short communication range and lack of sufficient energy available to power auxiliary electronics and sensors. Here, we explore the use of flexible perovskite photovoltaic cells to provide external power to semi-passive RFID tags to increase range and energy availability for external electronics such as microcontro…
Multiprotocol Wireless Timer Synchronization for IoT Systems
School of Electrical and Electronic Engineering, Nanyang Technological University（南洋理工大学电气与电子工程学院）；Lee Kong Chian School of Medicine, Nanyang Technological University（南洋理工大学李光前医学院）；Glasgow College, University of Electronic Science and Technology of China（电子科技大学格拉斯哥学院）
Towards realizing an intelligent networked society, enabling low-cost low-energy connectivity for things, also known as Internet of Things (IoT), is of crucial importance. While the existing wireless access networks require centralized signaling for managing network resources, this approach is of less interest for future generations of wireless networks due to the energy consumption in such signaling and the expected increase in the number of IoT devices. Then, in this work we investigate leveraging machine learning for distributed control of IoT communications. Towards this end, first we inve…
Energy sampling-based interference detection and identification (IDI) methods collide with the limitations of commercial off-the-shelf (COTS) IoT hardware. Moreover, long sensing times, complexity and inability to track concurrent interference strongly inhibit their applicability in most IoT deployments. Motivated by the increasing need for on-device IDI for wireless coexistence, we develop a lightweight and efficient method targeting interference identification already at the level of single interference bursts. Our method exploits real-time extraction of envelope and model-aided spectral fea…
University of Glasgow（格拉斯哥大学）；Ajman University（阿治曼大学）；Queen Mary University of London（伦敦玛丽女王大学）
A novel approach is presented in this work for context-aware connectivity and processing optimization of Internet of things (IoT) networks. Different from the state-of-the-art approaches, the proposed approach simultaneously selects the best connectivity and processing unit (e.g., device, fog, and cloud) along with the percentage of data to be offloaded by jointly optimizing energy consumption, response-time, security, and monetary cost. The proposed scheme employs a reinforcement learning algorithm, and manages to achieve significant gains compared to deterministic solutions. In particular, t…
Resilient Machine-learning Institute (ReMI)（弹性机器学习研究所）
In wireless Internet of things (IoT), the sensors usually have limited bandwidth and power resources. Therefore, in a distributed setup, each sensor should compress and quantize the sensed observations before transmitting them to a fusion center (FC) where a global decision is inferred. Most of the existing compression techniques and entropy quantizers consider only the reconstruction fidelity as a metric, which means they decouple the compression from the sensing goal. In this work, we argue that data compression mechanisms and entropy quantizers should be co-designed with the sensing goal, s…
Pukyong National University (PKNU)（釜庆国立大学）；COMSATS University Islamabad (CUI)（COMSATS伊斯兰堡大学）；King Abdulaziz University (KAU)（阿卜杜勒阿齐兹国王大学）；The Chinese University of Hong Kong (CUHK)（香港中文大学）
In this paper, we propose a novel framework for performance optimization in Internet of Things (IoT)-based next-generation wireless sensor networks. In particular, a computationally-convenient system is presented to combat two major research problems in sensor networks. First is the conventionally-tackled resource optimization problem which triggers the drainage of battery at a faster rate within a network. Such drainage promotes inefficient resource usage thereby causing sudden death of the network. The second main bottleneck for such networks is that of data degradation. This is because the …
Kyoto University（京都大学）；Tokyo Institute of Technology（东京工业大学）
The distributed inference framework is an emerging technology for real-time applications empowered by cutting-edge deep machine learning (ML) on resource-constrained Internet of things (IoT) devices. In distributed inference, computational tasks are offloaded from the IoT device to other devices or the edge server via lossy IoT networks. However, narrow-band and lossy IoT networks cause non-negligible packet losses and retransmissions, resulting in non-negligible communication latency. This study solves the problem of the incremental retransmission latency caused by packet loss in a lossy IoT …
Since Internet of Things (IoT) is suggested as the fundamental platform to adapt massive connections and secure transmission, we study physical-layer authentication in the point-to-point wireless systems relying on reconfigurable intelligent surfaces (RIS) technique. Due to lack of direct link from IoT devices (both legal and illegal devices) to the access point, we benefit from RIS by considering two main secure performance metrics. As main goal, we examine the secrecy performance of a RIS-aided wireless communication systems which show secure performance in the presence of an eavesdropping I…
Future IoT networks consist of heterogeneous types of IoT devices (with various communication types and energy constraints) which are assumed to belong to an IoT service provider (ISP). To power backscattering-based and wireless-powered devices, the ISP has to contract with an energy service provider (ESP). This article studies the strategic interactions between the ISP and its ESP and their implications on the joint optimal time scheduling and energy trading for heterogeneous devices. To that end, we propose an economic framework using the Stackelberg game to maximize the network throughput a…
Mobile edge computing (MEC) is envisioned as a promising technique to support computation-intensive and timecritical applications in future Internet of Things (IoT) era. However, the uplink transmission performance will be highly impacted by the hostile wireless channel, the low bandwidth, and the low transmission power of IoT devices. Recently, intelligent reflecting surface (IRS) has drawn much attention because of its capability to control the wireless environments so as to enhance the spectrum and energy efficiencies of wireless communications. In this paper, we consider an IRS-aided multi…
Internet-of-Things (IoT) refers to a massively heterogeneous network formed through smart devices connected to the Internet. In the wake of disruptive IoT with a huge amount and variety of data, Machine Learning (ML) and Deep Learning (DL) mechanisms will play a pivotal role to bring intelligence to the IoT networks. Among other aspects, ML and DL can play an essential role in addressing the challenges of resource management in large-scale IoT networks. In this article, we conduct a systematic and in-depth survey of the ML- and DL-based resource management mechanisms in cellular wireless and I…
Physical unclonable functions (PUF) in silicon exploit die-to-die manufacturing variations during fabrication for uniquely identifying each die. Since it is practically a hard problem to recreate exact silicon features across dies, a PUFbased authentication system is robust, secure and cost-effective, as long as bias removal and error correction are taken into account. In this work, we utilize the effects of inherent process variation on analog and radio-frequency (RF) properties of multiple wireless transmitters (Tx) in a sensor network, and detect the features at the receiver (Rx) using a de…
Wireless energy transfer (WET) is emerging as an enabling green technology for Internet of Things (IoT) networks. WET allows the IoT devices to wirelessly recharge their batteries with energy from external sources such as dedicated radio frequency transmitters called power beacons (PBs). In this paper, we investigate the optimal deployment of PBs that guarantees a network-wide energy outage constraint. Optimal positions for the PBs are determined by maximizing the average incident power for the worst location in the service area since no information about the sensor deployment is provided. Suc…
The semantic communication system enables wireless devices to communicate effectively with the semantic meaning of the data. Wireless powered Internet of Things (IoT) that adopts the semantic communication system relies on harvested energy to transmit semantic information. However, the issue of energy constraint in the semantic communication system is not well studied. In this paper, we propose a semantic-based energy valuation and take an economic approach to solve the energy allocation problem as an incentive mechanism design. In our model, IoT devices (bidders) place their bids for the ener…
The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, …
Superimposed signals are anticipated to improve wireless spectrum efficiency to support the ever-growing IoT applications. Implementing the superimposed signal demands on ideally aligned signals in both the time and frequency domains. Prior work applied an average carrier-frequency offset compensation to the superimposed signal under the assumptions of homogeneous devices and static environments. However, this will cause a significant signal distortion in practice when heterogeneous IoT devices are involved in a dynamic environment. This paper presents PhyCode, which exploits the nature of var…
With the proliferation of versatile Internet of Things (IoT) services, smart IoT devices are increasingly deployed at the edge of wireless networks to perform collaborative machine learning tasks using locally collected data, giving rise to the edge learning paradigm. Due to device restrictions and resource constraints, edge learning among massive IoT devices faces major technical challenges caused by the communication bottleneck, data and device heterogeneity, non-convex optimization, privacy and security concerns, and dynamic environments. To overcome these challenges, this article studies a…
Illinois Institute of Technology（伊利诺伊理工学院）；Argonne National Laboratory（阿贡国家实验室）
In this paper, we apply the Non-Orthogonal Multiple Access (NOMA) technique to improve the massive channel access of a wireless IoT network where solar-powered Unmanned Aerial Vehicles (UAVs) relay data from IoT devices to remote servers. Specifically, IoT devices contend for accessing the shared wireless channel using an adaptive $p$-persistent slotted Aloha protocol; and the solar-powered UAVs adopt Successive Interference Cancellation (SIC) to decode multiple received data from IoT devices to improve access efficiency. To enable an energy-sustainable capacity-optimal network, we study the j…
