We have developed an trapped ion system for producing two-dimensional (2D) ion crystals for applications in scalable quantum computing, quantum simulations, and 2D crystal phase transition and defect studies. The trap is a modification of a Paul trap with its ring electrode flattened and split into eight identical sectors, and its two endcap electrodes shaped as truncated hollow cones for laser and imaging optics access. All ten trap electrodes can be independently DC-biased to create various aspect ratio trap geometries. We trap and Doppler cool 2D crystals of up to 30 Ba+ ions and demonstrate the tunability of the trapping potential both in the plane of the crystal and in the transverse direction.
We present a model as well as experimental results for a surface electrode radio-frequency Paul trap that has a circular electrode geometry well-suited for trapping of single ions and two-dimensional planar ion crystals. The trap design is compatible with microfabrication and offers a simple method by which the height of the trapped ions above the surface may be changed \emph{in situ}. We demonstrate trapping of single and few Sr+ ions over an ion height range of 200-1000 microns for several hours under Doppler laser cooling, and use these to characterize the trap, finding good agreement with …
We present a comprehensive phase-space treatment of the motion of charged particles in electrodynamic traps. Focusing on five-wire surface-electrode Paul traps, we study the details of integrable and chaotic motion of a single ion. We introduce appropriate phase-space measures and give a universal characterization of the trap effectiveness as a function of the parameters. We rigorously derive the commonly used (time-independent) pseudopotential approximation, quantify its regime of validity and analyze the mechanism of its breakdown within the time-dependent potential. The phase space approach…
It was recently proposed to use small groups of trapped ions as qubit carriers in miniaturized electrode arrays that comprise a large number of individual trapping zones, between which ions could be moved. This approach might be scalable for quantum information processing with a large numbers of qubits. Processing of quantum information is achieved by transporting ions to and from separate memory and qubit manipulation zones in between quantum logic operations. The transport of ion groups in this scheme plays a major role and requires precise experimental control and fast transport. In this pa…
Chiaverini et al. [Quant. Inf. Comput. 5, 419 (2005)] recently suggested a linear Paul trap geometry for ion trap quantum computation that places all of the electrodes in a plane. Such planar ion traps are compatible with modern semiconductor fabrication techniques and can be scaled to make compact, many zone traps. In this paper we present an experimental realization of planar ion traps using electrodes on a printed circuit board to trap linear chains of tens of 0.44 micron diameter charged particles in a vacuum of 15 Pa (0.1 torr). With these traps we address concerns about the low trap dept…
We report techniques for the fabrication of multi-zone linear RF Paul traps that exploit the machinability and electrical conductivity of degenerate silicon. The approach was tested by trapping and laser cooling 24Mg+ ions in two trap geometries: a single-zone two-layer trap and a multi-zone surface-electrode trap. From the measured ion motional heating rate we determine an electric field spectral density at the ion's position of approximately 1E-10 (V/m)^2/Hz at a frequency of 1.125 MHz when the ion lies 40 micron above the trap surface. One application of these devices is controlled manipula…
We describe the advantages of 2-dimensional, addressable arrays of spherical Paul traps. They would provide for the ability to address and tailor the interaction strengths of trapped objects in 2D and could establish a valuable new tool for quantum information processing. Simulations of trapping ions are compared to first tests using printed circuit board trap arrays loaded with dust particles. Pair-wise interactions in the array are addressed by means of an adjustable radio-frequency (RF) electrode shared between trapping sites. By attenuating this RF electrode potential, neighboring pairs of…
Paul traps are widely used to confine electrically charged particles like atomic and molecular ions by using an intense radiofrequency (RF) field, typically obtained by a voltage drop on capacitative electrodes placed in vacuum. We present a RF drive realized on a compact printed circuit board (PCB) and providing a high-voltage RF signal to a quadrupole Paul trap. The circuit is formed by four interdependent resonant circuits $-$ each of which connected to an electrode of a Paul trap $-$ fed by low-noise amplifiers, leading to an output voltage of peak-to-peak amplitude up to 200 V at 3.23 MHz…
We investigate a surface-mounted electrode geometry for miniature linear radio frequency Paul ion traps. The electrodes reside in a single plane on a substrate, and the pseudopotential minimum of the trap is located above the substrate at a distance on order of the electrodes' lateral extent or separation. This architecture provides the possibility to apply standard microfabrication principles to the construction of multiplexed ion traps, which may be of particular importance in light of recent proposals for large-scale quantum computation based on individual trapped ions.
There is recent interest in determining energy costs of shortcuts to adiabaticity (STA), but different definitions of "cost" have been used. We demonstrate the importance of taking into account the Control System (CS) for a fair assessment of energy flows and consumptions. We model the energy consumption and power to transport an ion by a STA protocol in a multisegmented Paul trap. The ion is driven by an externally controlled, moving harmonic oscillator. Even if no net ion- energy is gained at destination, setting the time-dependent control parameters is a macroscopic operation that costs ene…
We describe the design, fabrication, and operation of a novel surface-electrode Paul trap that produces a radio-frequency-null along the axis perpendicular to the trap surface. This arrangement enables control of the vertical trapping potential and consequentially the ion-electrode distance via dc-electrodes only. We demonstrate confinement of single $^{40}$Ca$^+$ ions at heights between $50~μ$m and $300~μ$m above planar copper-coated aluminium electrodes. We investigate micromotion in the vertical direction and show cooling of both the planar and vertical motional modes into the ground state.…
Surface-electrode (SE) rf traps are a promising approach to manufacturing complex ion-trap networks suitable for large-scale quantum information processing. In this paper we present analytical methods for modeling SE traps in the gapless plane approximation, and apply these methods to two particular classes of SE traps. For the SE ring trap we derive analytical expressions for the trap geometry and strength, and also calculate the depth in the absence of control fields. For translationally symmetric multipole configurations (analogs of the linear Paul trap), we derive analytical expressions fo…
We demonstrate confinement of individual atomic ions in a radio-frequency Paul trap with a novel geometry where the electrodes are located in a single plane and the ions confined above this plane. This device is realized with a relatively simple fabrication procedure and has important implications for quantum state manipulation and quantum information processing using large numbers of ions. We confine laser-cooled Mg-24 ions approximately 40 micrometer above planar gold electrodes. We measure the ions' motional frequencies and compare them to simulations. From measurements of the escape time o…
Despite the progress in building sophisticated microfabricated ion traps, Paul traps employing needle electrodes retain their significance due to the simplicity of fabrication while producing high-quality systems suitable for quantum information processing, atomic clocks etc. For low noise operations such as minimizing `excess micromotion', needles should be geometrically straight and aligned precisely with respect to each other. Self-terminated electrochemical etching, previously employed for fabricating ion trap needle electrodes employs a sensitive and time-consuming technique resulting in …
We study the problem of designing electrode structures that allow pairs of ions to be brought together and separated rapidly in an array of linear Paul traps. We show that it is desirable for the electrode structure to produce a d.c. octupole moment with an a.c. radial quadrupole. For the case where electrical breakdown limits the voltages that can be applied, we show that the octupole is more demanding than the quadrupole when the characteristic distance scale of the structure is larger than 1 to 10 microns (for typical materials). We present a variety of approaches and optimizations of struc…
We report on the loading of large ion Coulomb crystals into a linear Paul trap incorporating a high-Finesse optical cavity (F~3200). We show that, even though the 3-mm diameter dielectric cavity mirrors are placed between the trap electrodes and separated by only 12 mm, it is possible to produce in situ ion Coulomb crystals containing more than 100.000 calcium ions of various isotopes and with lengths of up to several millimeters along the cavity axis. We show that the number of ions inside the cavity mode is in principle high enough to achieve strong collective coupling between the ion Coulom…
Single ions held in linear Paul traps are promising candidates for a future quantum computer. Here, we discuss a two-layer microstructured segmented linear ion trap. The radial and axial potentials are obtained from numeric field simulations and the geometry of the trap is optimized. As the trap electrodes are segmented in the axial direction, the trap allows the transport of ions between different spatial regions. Starting with realistic numerically obtained axial potentials, we optimize the transport of an ion such that the motional degrees of freedom are not excited, even though the transpo…
We describe the fabrication and characterization of a new surface-electrode Paul ion trap designed for experiments in scalable quantum information processing with Ca+. A notable feature is a symmetric electrode pattern which allows rotation of the normal modes of ion motion, yielding efficient Doppler cooling with a single beam parallel to the planar surface. We propose and implement a technique for micromotion compensation in all directions using an infrared repumper laser beam directed into the trap plane. Finally, we employ an alternate repumping scheme that increases ion fluorescence and s…
We demonstrate a general technique to achieve a precise radial displacement of the nodal line of the radiofrequency (rf) field in a linear Paul trap. The technique relies on selective adjustment of the load capacitance of the trap electrodes, achieved through the addition of capacitors to the basic resonant rf-circuit used to drive the trap. Displacements of up to 100 micrometer with micrometer precision are measured using a combination of fluorescence images of ion Coulomb crystals and coherent coupling of such crystals to a mode of an optical cavity. The displacements are made without measur…
We have investigated motional heating of laser-cooled 9Be+ ions held in radio-frequency (Paul) traps. We have measured heating rates in a variety of traps with different geometries, electrode materials, and characteristic sizes. The results show that heating is due to electric-field noise from the trap electrodes which exerts a stochastic fluctuating force on the ion. The scaling of the heating rate with trap size is much stronger than that expected from a spatially uniform noise source on the electrodes (such as Johnson noise from external circuits), indicating that a microscopic uncorrelated…
We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 microns. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler cooled ion crystals of Ca-40 with this kind of traps. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a…
Transient dynamics of parametric driving for single-electron image current detection in a Paul trap
University of California, Berkeley（加州大学伯克利分校）；Challenge Institute for Quantum Computation, University of California, Berkeley（加州大学伯克利分校量子计算挑战研究所）；School of Physics, Huazhong University of Science and Technology（华中科技大学物理学院）
Electrical Noise Produced by Micron-Sized Particles above a Surface Paul Trap
University of California, Berkeley（加州大学伯克利分校）；Challenge Institute for Quantum Computation, University of California, Berkeley（加州大学伯克利分校量子计算挑战研究所）；Lawrence Berkeley National Laboratory（劳伦斯伯克利国家实验室）
We investigate the evolution of quasi-static stray electric fields in a linear Paul trap over a period of several months. Depending on how these electric fields are initially induced we observe very different time scales for the field drifts. Photo-induced electric fields decay on time scales of days. We interpret this as photo-electrically generated charges on insulating materials which decay via discharge currents. In contrast, stray fields due to the exposure of the ion trap to a beam of Ba atoms mainly exhibit slow dynamics on the order of months. We explain this observation as a consequen…
Microfabricated Paul ion traps show tremendous promise for large-scale quantum information processing. However, motional heating of ions can have a detrimental effect on the fidelity of quantum logic operations in miniaturized, scalable designs. In many experiments, contributions to ion heating due to technical voltage noise present on the static (DC) and radio frequency (RF) electrodes can be overlooked. We present a reliable method for determining the extent to which motional heating is dominated by residual voltage noise on the DC or RF electrodes. Also, we demonstrate that stray DC electri…
A new scheme for the individual addressing of ions in a trap is described that does not rely on light beams tightly focused onto only one ion. The scheme utilizes ion micromotion that may be induced in a linear trap by dc offset potentials. Thus coupling an individual ion to the globally applied light fields corresponds to a mere switching of voltages on a suitable set of compensation electrodes. The proposed scheme is especially suitable for miniaturized rf (Paul) traps with typical dimensions of about 20-40 microns.
A plasma glow discharge system was created using a conventional microwave oven to ignite and maintain the plasma. The system was used for plasma cleaning and its properties were analysed to assess its viability for removing surface contaminants, which cause anomalous heating, from Paul trap electrodes used in ion trapping. Qualitative results showed that the argon plasma could remove copper oxide layers formed on thin sheets in 1-2 minutes. The addition of air into the plasma system allowed for the cleaning of more complex hydrocarbon contaminants, as highlighted by the removal of permanent ma…
We actively stabilize the harmonic oscillation frequency of a laser-cooled atomic ion confined in a rf Paul trap by sampling and rectifying the high voltage rf applied to the trap electrodes. We are able to stabilize the 1 MHz atomic oscillation frequency to better than 10 Hz, or 10 ppm. This represents a suppression of ambient noise on the rf circuit by 34 dB. This technique could impact the sensitivity of ion trap mass spectrometry and the fidelity of quantum operations in ion trap quantum information applications.
We demonstrate superconducting nanowire single photon detectors with 76 +/- 4 % system detection efficiency at a wavelength of 315 nm and an operating temperature of 3.2 K, with a background count rate below 1 count per second at saturated detection efficiency. We propose integrating these detectors into planar surface electrode radio-frequency Paul traps for use in trapped ion quantum information processing. We operate detectors integrated into test ion trap structures at 3.8 K both with and without typical radio-frequency trapping electric fields. The trapping fields reduce system detection …
Integration of fiber optics may play a critical role in the development of quantum information processors based on trapped ions and atoms by enabling scalable collection and delivery of light and coupling trapped ions to optical microcavities. We trap 24Mg+ ions in a surface-electrode Paul trap that includes an integrated optical fiber for detecting 280-nm fluorescence photons. The collection numerical aperture is 0.37 and total collection efficiency is 2.1 %. The ion can be positioned between 80 \mum and 100 \mum from the tip of the fiber by use of an adjustable rf-pseudopotential.
Miniaturized ion trap arrays with many trap segments present a promising architecture for scalable quantum information processing. The miniaturization of segmented linear Paul traps allows partitioning the microtrap in different storage and processing zones. The individual position control of many ions - each of them carrying qubit information in its long-lived electronic levels - by the external trap control voltages is important for the implementation of next generation large-scale quantum algorithms. We present a novel scalable microchip multi-segmented ion trap with two different adjacent …
We investigate the dynamics of ion crystals in zigzag configuration in transverse magnetic field gradients. A surface-electrode Paul trap is employed to trap $^{40}$Ca$^+$ ions and features submerged wires to generate magnetic field gradients of up to 16.3(9) T/m at the ions position. With the gradient aligned in the direction perpendicular to the axis of weakest confinement, along which linear ion crystals are formed, we demonstrate magnetic field gradient induced coupling between the spin and ion motion. For crystals of three ions across their linear-to-zigzag structural transition we perfor…
We describe the implementation of a three-dimensional Paul ion trap fabricated from a stack of precision-machined silica glass wafers, which incorporates a pair of junctions for 2-dimensional ion transport. The trap has 142 dedicated electrodes which can be used to define multiple potential wells in which strings of ions can be held. By supplying time-varying potentials, this also allows for transport and re-configuration of ion strings. We describe the design, simulation, fabrication and packaging of the trap, including explorations of different parameter regimes and possible optimizations an…
While engineered quantum systems are a general route to the manipulation of multipartite quantum states, access in a physical system to a continuous quantum phase transition under sufficient control offers the possibility of an intrinsic source of entangled states. To this end we realize the quantum version of the linear-zigzag structural transition for arrays of up to five ground state-cooled ions held in a linear Paul trap and we demonstrate several of the control requirements towards entangled-state interferometry near the critical point. Using in-situ spectroscopy we probe the energy level…
We present a unitary quantum control scheme that produces a highly monochromatic ion beam from a Paul trap. Our protocol is implementable by supplying the segmented electrodes with voltages of the order of Volts, which mitigates the impact of fluctuating voltages in previous designs and leads to a low-dispersion beam of ions. Moreover, our proposal does not rely on sympathetically cooling the ions, which bypasses the need of loading different species in the trap -- namely, the propelled ion and, e.g., a $^{40}$Ca$^+$ atom able to exert sympathetic cooling -- incrementing the repetition rate of…
We describe, realize, and experimentally investigate a method to perform physical rotations of ion chains, trapped in a segmented surface Paul trap, as a building block for large scale quantum computational sequences. Control of trapping potentials is achieved by parametrizing electrode voltages in terms of spherical harmonic potentials. Voltage sequences that enable crystal rotations are numerically obtained by optimizing time-dependent ion positions and motional frequencies, taking into account the effect of electrical filters in our set-up. We minimize rotation-induced heating by expanding …
A monolithic segmented 3D ion trap fabricated from fused silica by selective laser-induced etching
ETH Zürich–PSI Quantum Computing Hub（苏黎世联邦理工学院-保罗谢勒研究所量子计算中心）；Institute for Quantum Electronics, ETH Zürich（苏黎世联邦理工学院量子电子学研究所）；Department of Physics, University of Trieste（的里雅斯特大学物理系）；Oxford Ionics（牛津离子体公司）；NVIDIA（英伟达）；Nanophotonic Systems Laboratory, Department of Mechanical and Process Engineering, ETH Zurich（苏黎世联邦理工学院机械与工艺工程纳米光子学系统实验室）
An array of ions in a linear radio-frequency (RF) Paul trap is a good candidate for investigating structural phase transitions, such as the linear-to-zigzag (LZ) transition, due to the convenient control provided by modification of the trap confinement strength. In such studies, the trap secular frequencies are a key factor that limits the stability of the critical point (CP). In this paper, we implement secular-frequency stabilization, including active feedback stabilization of the RF voltage near the trap electrodes, and achieve a stability of better than 5~ppm over 200~s for both transverse…
We present and characterize fiber mirrors and a miniaturized ion-trap design developed to integrate a fiber-based Fabry-Perot cavity (FFPC) with a linear Paul trap for use in cavity-QED experiments with trapped ions. Our fiber-mirror fabrication process not only enables the construction of FFPCs with small mode volumes, but also allows us to minimize the influence of the dielectric fiber mirrors on the trapped-ion pseudopotential. We discuss the effect of clipping losses for long FFPCs and the effect of angular and lateral displacements on the coupling efficiencies between cavity and fiber. Op…
A single-ion reservoir has been tested, and characterized in order to be used as a highly sensitive optical detector of electric signals arriving at the trapping electrodes. Our system consists of a single laser-cooled $^{40}$Ca$^+$ ion stored in a Paul trap with rotational symmetry. The performance is observed through the axial motion of the ion, which is equivalent to an underdamped and forced oscillator. Thus, the results can be projected also to Penning traps. We have found that, for an ion oscillator temperature $T_{\scriptsize{\rm axial}}\lesssim 10$~mK in the forced-frequency range $ω_z…
