A Deep Learning Approach Towards Prediction of Faults in Wind Turbines
University of Hull（赫尔大学）
Joyjit Chatterjee, Nina Dethlefs
备注：
Presented at the Northern Lights Deep Learning Workshop (NLDL), Tromso, Norway in January 2019. The workshop program can be found at http://nldl2019.org/program.html page
With the rising costs of conventional sources of energy, the world is moving towards sustainable energy sources including wind energy. Wind turbines consist of several electrical and mechanical components and experience an enormous amount of irregular loads, making their operational behaviour at times inconsistent. Operations and Maintenance (O&M) is a key factor in monitoring such inconsistent behaviour of the turbines in order to predict and prevent any incipient faults which may occur in the near future. Machine learning has been applied to the domain of wind energy over the last decade for analysing, diagnosing and predicting wind turbine faults. In particular, we follow the idea of modelling a turbine's performance as a power curve where any power outputs that fall off the curve can be seen as performance errors. Existing work using this idea has used data from a turbine's Supervisory Control & Acquisition (SCADA) system to filter and analyse fault & alarm data using regression techniques. In contrast to previous work, we explore how deep learning can be applied to fault prediction from open access meteorological data only.
Instituto Superior Tecnico（高等技术学院）；INESC-ID（葡萄牙系统与计算机工程研究所）；University of Lisbon（里斯本大学）
The cost of wind energy can be reduced by using SCADA data to detect faults in wind turbine components. Normal behavior models are one of the main fault detection approaches, but there is a lack of consensus in how different input features affect the results. In this work, a new taxonomy based on the causal relations between the input features and the target is presented. Based on this taxonomy, the impact of different input feature configurations on the modelling and fault detection performance is evaluated. To this end, a framework that formulates the detection of faults as a classification …
A growing number of wind turbines are equipped with vibration measurement systems to enable a close monitoring and early detection of developing fault conditions. The vibration measurements are analyzed to continuously assess the component health and prevent failures that can result in downtimes. This study focuses on gearbox monitoring but is applicable also to other subsystems. The current state-of-the-art gearbox fault diagnosis algorithms rely on statistical or machine learning methods based on fault signatures that have been defined by human analysts. This has multiple disadvantages. Defi…
Generative multi-domain transfer learning for fault detection in data-scarce wind turbines
School of Engineering and Computer Science, Bern University of Applied Sciences（伯尔尼应用科学大学工程与计算机科学学院）；Faculty of Informatics, Università della Svizzera italiana（瑞士意大利语大学信息学院）；Department of Geoscience and Remote Sensing, Delft University of Technology（代尔夫特理工大学地球科学与遥感系）
Bern University of Applied Sciences（伯尔尼应用科学大学）；WinJi AG（WinJi股份公司）
Most wind turbines are remotely monitored 24/7 to allow for an early detection of operation problems and developing damage. We present a new fault detection method for vibration-monitored drivetrains that does not require any feature engineering. Our method relies on a simple model architecture to enable a straightforward implementation in practice. We propose to apply convolutional autoencoders for identifying and extracting the most relevant features from the half spectrum in an automated manner, saving time and effort. Thereby, a spectral model of the normal vibration response is learnt for…
This paper presents a novel feature fusion-based deep learning model (called CASU2Net) for fault detection in offshore wind turbines. The proposed CASU2Net model benefits of a two-step early fusion to enrich features in the final stage. Moreover, since previous studies did not consider uncertainty while model developing and also predictions, we take advantage of Monte Carlo dropout (MC dropout) to enhance the certainty of the results. To design fault detection model, we use five sensors and a sliding window to exploit the inherent temporal information contained in the raw time-series data obta…
Inspired by recent progress in machine learning, a data-driven fault diagnosis and isolation (FDI) scheme is explicitly developed for failure in the fuel supply system and sensor measurements of the laboratory gas turbine system. A passive approach of fault diagnosis is implemented where a model is trained using machine learning classifiers to detect a given set of fault scenarios in real-time on which it is trained. Towards the end, a comparative study is presented for well-known classification techniques, namely Support vector classifier, linear discriminant analysis, K-neighbor, and decisio…
Adani Institute of Infrastructure Engineering（阿达尼基础设施工程学院）
Wind turbine is a complex machine with its rotating and non-rotating equipment being sensitive to faults. Due to increased wear and tear, the maintenance aspect of a wind turbine is of critical importance. Unexpected failure of wind turbine components can lead to increased O\&M costs which ultimately reduces effective power capture of a wind farm. Fault detection in wind turbines is often supplemented with SCADA data available from wind farm operators in the form of time-series format with a 10-minute sample interval. Moreover, time-series analysis and data representation has become a powerful…
Hybrid Autoencoder-Based Framework for Early Fault Detection in Wind Turbines
Department of Computer Science and Engineering, Alliance University（计算机科学与工程系，联盟大学）；College of Engineering and IT, University of Dubai（工程与信息技术学院，迪拜大学）；Shiv Nadar University（Shiv Nadar大学）
The wind energy industry has been experiencing tremendous growth and confronting the failures of wind turbine components. Wind turbine gearbox malfunctions are particularly prevalent and lead to the most prolonged downtime and highest cost. This paper presents a data-driven gearbox fault detection algorithm base on high frequency vibration data using graph neural network (GNN) models and sparse filtering (SF). The approach can take advantage of the comprehensive data sources and the complicated sensing networks. The GNN models, including basic graph neural networks, gated graph neural networks…
CEEMDAN-Based Multiscale CNN for Wind Turbine Gearbox Fault Detection
College of Engineering and Information Technology, University of Dubai（迪拜大学工程与信息技术学院）；Department of Electrical Engineering, University of Malaya（马来大学电气工程系）；School of Engineering, University of Wollongong in Dubai（迪拜大学学院工程学院）
There is growing importance to detecting faults and implementing the best methods in industrial and real-world systems. We are searching for the most trustworthy and practical data-based fault detection methods proposed by artificial intelligence applications. In this paper, we propose a framework for fault detection based on reinforcement learning and a policy known as proximal policy optimization. As a result of the lack of fault data, one of the significant problems with the traditional policy is its weakness in detecting fault classes, which was addressed by changing the cost function. Usi…
Fault Detection in New Wind Turbines with Limited Data by Generative Transfer Learning
School of Engineering and Computer Science, Bern University of Applied Sciences, Biel, Switzerland（工程与计算机科学学院，伯恩应用科学大学，瑞士比尔）；Faculty of Informatics, Università della Svizzera italiana, Lugano, Switzerland（信息学院，瑞士意大利大学，瑞士卢加诺）；Department of Geoscience and Remote Sensing, Delft University of Technology, Delft, The Netherlands（地质与遥感系，代尔夫特理工大学，荷兰代尔夫特）
In modern industrial systems, diagnosing faults in time and using the best methods becomes more and more crucial. It is possible to fail a system or to waste resources if faults are not detected or are detected late. Machine learning and deep learning have proposed various methods for data-based fault diagnosis, and we are looking for the most reliable and practical ones. This paper aims to develop a framework based on deep learning and reinforcement learning for fault detection. We can increase accuracy, overcome data imbalance, and better predict future defects by updating the reinforcement …
Wind power is seeing a strong growth around the world. At the same time, shrinking profit margins in the energy markets let wind farm managers explore options for cost reductions in the turbine operation and maintenance. Sensor-based condition monitoring facilitates remote diagnostics of turbine subsystems, enabling faster responses when unforeseen maintenance is required. Condition monitoring with data from the turbines' supervisory control and data acquisition (SCADA) systems was proposed and SCADA-based fault detection and diagnosis approaches introduced based on single-task normal operatio…
Hochschule Bonn-Rhein-Sieg（波恩-莱茵-锡格应用技术大学）；Fraunhofer Center for Machine Learning and SCAI（弗劳恩霍夫机器学习中心与SCAI）
Ice accumulation in the blades of wind turbines can cause them to describe anomalous rotations or no rotations at all, thus affecting the generation of electricity and power output. In this work, we investigate the problem of ice accumulation in wind turbines by framing it as anomaly detection of multi-variate time series. Our approach focuses on two main parts: first, learning low-dimensional representations of time series using a Variational Recurrent Autoencoder (VRAE), and second, using unsupervised clustering algorithms to classify the learned representations as normal (no ice accumulated…
A detailed understanding of wind turbine performance status classification can improve operations and maintenance in the wind energy industry. Due to different engineering properties of wind turbines, the standard supervised learning models used for classification do not generalize across data sets obtained from different wind sites. We propose two methods to deal with the transferability of the trained models: first, data normalization in the form of power curve alignment, and second, a robust method based on convolutional neural networks and feature-space extension. We demonstrate the succes…
The University of Texas at Dallas（德克萨斯大学达拉斯分校）；Argonne National Laboratory（阿贡国家实验室）
Different machine learning (ML) models are trained on SCADA and meteorological data collected at an onshore wind farm and then assessed in terms of fidelity and accuracy for predictions of wind speed, turbulence intensity, and power capture at the turbine and wind farm levels for different wind and atmospheric conditions. ML methods for data quality control and pre-processing are applied to the data set under investigation and found to outperform standard statistical methods. A hybrid model, comprised of a linear interpolation model, Gaussian process, deep neural network (DNN), and support vec…
Warsaw University of Technology（华沙理工大学）；Hasselt University（哈瑟尔特大学）；Tilburg University（蒂尔堡大学）；Universidad de Talca（塔尔卡大学）
Time series processing is an essential aspect of wind turbine health monitoring. Despite the progress in this field, there is still room for new methods to improve modeling quality. In this paper, we propose two new approaches for the analysis of wind turbine health. Both approaches are based on abstract concepts, implemented using fuzzy sets, which summarize and aggregate the underlying raw data. By observing the change in concepts, we infer about the change in the turbine's health. Analyzes are carried out separately for different external conditions (wind speed and temperature). We extract …
Wind turbine condition monitoring based on intra- and inter-farm federated learning
Bern University of Applied Sciences, School of Engineering（伯恩应用科学大学工程学院）；Università della Svizzera italiana, Faculty of Informatics（瑞士联合大学信息学院）；Delft University of Technology, Department of Geoscience（代尔夫特理工大学地质学院）；Remote Sensing, Stevinweg 1, 2628 Delft, The Netherlands（遥感学院，Stevinweg 1，2628 Delft，荷兰）
Wind turbine wake modelling is of crucial importance to accurate resource assessment, to layout optimisation, and to the operational control of wind farms. This work proposes a surrogate model for the representation of wind turbine wakes based on a state-of-the-art graph representation learning method termed a graph neural network. The proposed end-to-end deep learning model operates directly on unstructured meshes and has been validated against high-fidelity data, demonstrating its ability to rapidly make accurate 3D flow field predictions for various inlet conditions and turbine yaw angles. …
Intelligent Icing Detection Model of Wind Turbine Blades Based on SCADA data
China-EU Institute for Clean and Renewable Energy, Huazhong University of Science and Technology（华中科技大学中欧清洁与可再生能源学院）；HUST-Wuxi Research Institute（华中科技大学无锡研究院）
Prediction of wind turbines power with physics-informed neural networks and evidential uncertainty quantification
University of Granada（格拉纳达大学）；Research Centre for Information and Communication Technologies (CITIC-UGR)（信息与通信技术研究中心（CITIC-UGR））；TECNALIA（泰克纳利亚研究中心）；Imperial College London（帝国理工学院）
Rice University（莱斯大学）；Tsinghua University（清华大学）；The University of Hong Kong（香港大学）；University of Illinois at Chicago（伊利诺伊大学芝加哥分校）；Goldwind. Inc（金风科技）
Wind power, as an alternative to burning fossil fuels, is abundant and inexhaustible. To fully utilize wind power, wind farms are usually located in areas of high altitude and facing serious ice conditions, which can lead to serious consequences. Quick detection of blade ice accretion is crucial for the maintenance of wind farms. Unlike traditional methods of installing expensive physical detectors on wind blades, data-driven approaches are increasingly popular for inspecting the wind turbine failures. In this work, we propose a wavelet enhanced autoencoder model (WaveletAE) to identify wind t…
University of Navarra - Tecnun（纳瓦拉大学特克南工程学院）；NEM Solutions（NEM解决方案公司）
A failure detection system is the first step towards predictive maintenance strategies. A popular data-driven method to detect incipient failures and anomalies is the training of normal behaviour models by applying a machine learning technique like feed-forward neural networks (FFNN) or extreme learning machines (ELM). However, the performance of any of these modelling techniques can be deteriorated by the unexpected rise of non-stationarities in the dynamic environment in which industrial assets operate. This unpredictable statistical change in the measured variable is known as concept drift.…
