This paper describes a mode locking technique based on enhanced polarization dependent loss (PDL). The method utilizes a bent single mode fiber (SMF28) coil to induce sufficient PDL at 2 \(μ\)m wavelength region. Significant PDL in SMF28 coils is enabled since the light is much more weakly guided. A passively mode-locked thulium doped all-fiber laser is demonstrated using this simple device with polarization controllers as mode locker. The results indicate a moderate amount of 1 dB is sufficient to initiate and sustain stable mode-locking operation. We believe, to the best of our knowledge, this is the first demonstration of mode-locked fiber laser fully based on polarization dependent property of bent fiber section.
We report on the generation of multiwavelength gain-guided soliton (GGS) in an all normal dispersion birefringent fiber laser passively mode-locked with a semiconductor saturable absorber mirror (SESAM). Determined by the cavity birefringence, we observe the stable single-, dual- and triple- wavelength mode locked GGSs, which is a natural consequence of the mutual nonlinear interaction among the normal cavity dispersion, cavity fiber nonlinear Kerr effect, laser gain saturation and bandwidth limitation resulting from the intra-cavity birefringent filter.
We investigate theoretically a fiber laser passively mode-locked with nonlinear polarization rotation. A unidirectional ring cavity is considered with a polarizer placed between two sets of a halfwave plate and a quarterwave plate. A master equation is derived and the stability of the continuous and mode-locked solutions is studied. In particular, the effect of the orientation of the four phase plates and of the polarizer on the mode-locking regime is investigated.
We experimentally observe soliton self-organization and pulsation in a passively mode-locked fiber laser. The optomechanical interaction in the optical fiber is key to the formation of equidistant soliton bunches. These solitons simultaneously undergo a pulsation process with a period corresponding to tens of the cavity round trip time. Using the dispersive Fourier transformation technique, we find that the Kelly sidebands in the shot-to-shot spectra appear periodically, synchronizing with the pulsation.
We report on the observation of a novel mode locked optical comb generated at the Raman offset (Raman comb) in an optically pumped crystalline whispering gallery mode resonator. Mode locking is confirmed via measurement of the radio-frequency beat note produced by the optical comb on a fast photodiode. Neither the conventional Kerr comb nor hyper-parametric oscillation is observed when the Raman comb is present.
We analyze the emergence of wiggling temporal localized states in a passively mode-locked Vertical External- Cavity Surface-Emitting Laser composed by a gain chip and a resonant saturable absorber mirror. We show that the wiggling instability stems from the interplay between the third-order dispersion induced by the micro-cavities and their frequency mismatch. The latter is identified as an experimentally crucial parameter defining the range of existence of stable emission. We reveal the homoclinic scenario underlying the wiggling phenomenon and we show how it allows to control the oscillation…
We report on an optical frequency comb with 14nm (~1.8 THz) spectral bandwidth at -3 dB level that is generated using a passively mode-locked quantum-well (QW) laser in photonic integrated circuits (PICs) fabricated through an InP generic photonic integration technology platform. This 21.5-GHz colliding-pulse mode-locked laser cavity is defined by on-chip reflectors incorporating intracavity phase modulators followed by an extra-cavity SOA as booster amplifier. A 1.8-THz-wide optical comb spectrum is presented with ultrafast pulse that is 0.35-ps-wide. The radio frequency beat note has a 3-dB …
We demonstrate the broadband supercontinuum (SC) generation in photonic crystal fiber (PCF), highly nonlinear fiber (HNLF) and ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber with a passively mode-locked erbium-doped fiber laser (EDFL). The passively mode-locked EDFL incorporates a CNT-based saturable absorber and has achieved a pulse width of 620 fs with a pulse repetition rate of 18 MHz. The spectral broadening phenomena inside each fiber has been observed with respect to the variation in seed pulse power. The SC spectrum bandwidth of 1050 nm, 1400 nm, and 2000 nm has been achieved using PCF, HNLF, an…
We demonstrate the operation of an ultra low repetition rate, high peak power, picosecond diode pumped Nd:YVO4 passively mode locked laser oscillator. Repetition rates even below 1 MHz were achieved with the use of a new design multiple-pass cavity and a semiconductor saturable absorber. Long term stable operation at 1.2 MHz, pulse duration of 16.3 ps and average output power of 470 mW corresponding to 24 KW peak power pulses is reported. This is, to our knowledge, the lowest repetition rate high peak power pulses ever generated directly from a picosecond laser resonator without cavity dumping…
We report on the characterization of the timing stability of passively mode-locked discrete mode diode laser sources. These are edge-emitting devices with a spatially varying refractive index profile for spectral filtering. Two devices with a mode-locking frequency of 100 GHz are characterized. The first device is designed to support a comb of six modes and generates near Fourier limited 1.9 ps pulses. The second supports four primary modes resulting in a sinusoidal modulation of the optical intensity. Using a cross-correlation technique, we measured a 20 fs pulse to pulse timing jitter for th…
We show experimentally and theoretically that localized pulses can be generated from an electrically biased $200\,μ$m multi-transverse mode Vertical-Cavity Surface-Emitting Laser. The device is passively mode-locked using optical feedback from a distant Resonant Saturable Absorber Mirror and it is operated below threshold. We observe multistability between the off solution and a large variety of pulsating solutions with different number and arrangements of pulses per round-trip, thus indicating that the mode-locked pulses are localized, i.e. mutually independent. We show that a modulation of t…
We report a passively mode-locked erbium-doped fiber laser with pulsewidths switchable from 473 fs to 76.8 ns, where the fundamental mode-locking, noise-like pulse, nanosecond mode-locking, and dual-width mode-locking are obtained by adjusting a polarization controller. Co-existence of femto- and nano-second pulses in dual-width mode-locking is attributed to the gain balancing. Analytic modeling of the fiber laser with cubic-quintic Ginzburg-Landau equation is presented, in which the pulsewidths are calculated as functions of dispersion, saturable absorption, and self-phase modulation. The gen…
We analyze the dynamics of passively mode-locked integrated external-cavity surface-emitting Lasers (MIXSELs) using a first-principle dynamical model based upon delay algebraic equations. We show that the third order dispersion stemming from the lasing micro-cavity induces a train of decaying satellites on the leading edge of the pulse. Due to the nonlinear interaction with carriers, these satellites may get amplified thereby destabilizing the mode-locked states. In the long cavity regime, the localized structures that exist below the lasing threshold are found to be deeply affected by this in…
We present a novel approach for the analysis of passively mode-locked semiconductor lasers that allows for efficient parameter sweeps and time jitter analysis. It permits accessing the ultra-low repetition rate regime where pulses become localized states. The analysis including slow (e.g. thermal) processes or transverse dynamics becomes feasible. Our method bridges the divide between the phenomenological, yet highly efficient, pulse iterative model that is the Haus master equation, and the more involved first principle descriptions relying on time delayed equations. Our iterative functional m…
We study the effect of noise on the dynamics of passively mode-locked semiconductor lasers both experimentally and theoretically. A method combining analytical and numerical approaches for estimation of pulse timing jitter is proposed. We investigate how the presence of dynamical features such as wavelength bistability affects timing jitter.
Soliton explosions are among the most exotic dissipative phenomena studied in mode-locked lasers. In this regime, a dissipative soliton circulating in the laser cavity experiences an abrupt structural collapse, but within a few roundtrips returns to its original quasi-stable state. In this work we report on the first observation of such events in a fiber laser. Specifically, we identify clear explosion signatures in measurements of shot-to-shot spectra of an Yb-doped mode-locked fiber laser that is operating in a transition regime between stable and noise-like emission. The comparatively long,…
We demonstrate the existence of stable three dimensional dissipative localized structures in the output of a laser coupled to a distant saturable absorber. These phase invariant light bullets are individually addressable and can be envisioned for three dimensional optical information storage. An effective theory provides for an intuitive picture and allows to relate their formation to the morphogenesis of static auto-solitons and cellular patterns. The complexity incurred by the widely different time scales present in the problem as well as by non-local couplings that stem from the material de…
Pulse formation in passively mode locked lasers is often accompanied with dispersive waves that form of spectral sidebands due to spatial inhomogoneities in the laser cavity. Here we present an explicit calculation of the amplitude, frequency, and precise shape of the sidebands accompanying a soliton-like pulse. We then extend the study to the global steady state of mode locked laser with a variable number of pulses, and present experimental results in a mode locked fiber laser that confirm the theory. The strong correlation between the temporal width of the sidebands and the measured spacing …
We consider design optimization of passively mode-locked two-section semiconductor lasers that incorporate intracavity grating spectral filters. Our goal is to develop a method for finding the optimal wavelength location for the filter in order to maximize the region of stable mode-locking as a function of drive current and reverse bias in the absorber section. In order to account for material dispersion in the two sections of the laser, we use analytic approximations for the gain and absorption as a function of carrier density and frequency. Fits to measured gain and absorption curves then pr…
We propose a semi-analytical method of calculating the timing fluctuations in mode-locked semiconductor lasers and apply it to study the effect of delayed coherent optical feedback on pulse timing jitter in these lasers. The proposed method greatly reduces computation times and therefore allows for the investigation of the dependence of timing fluctuations over greater parameter domains. We show that resonant feedback leads to a reduction in the timing jitter and that a frequency-pulling region forms about the main resonances, within which a timing jitter reduction is observed. The width of th…
We present the first direct observation of the bound state of multiple dissipative optical solitons in which bond length and bond strength can be individually controlled in a broad range in a regular manner. We have observed experimentally a new type of stable and extremely elastic soliton crystals that can be stretched and compressed many times conserving their structure by adjusting the bond properties in real time in a specially designed passively mode-locked fiber laser incorporating highly asymmetric tunable Mach-Zehnder interferometer. The temporal structure and dynamics of the generated…
We study the emergence and the stability of temporal localized structures in the output of a semiconductor laser passively mode-locked by a saturable absorber in the long cavity regime. For large yet realistic values of the linewidth enhancement factor, we disclose the existence of secondary dynamical instabilities where the pulses develop regular and subsequent irregular temporal oscil- lations. By a detailed bifurcation analysis we show that additional solution branches that consist in multi-pulse (molecules) solutions exist. We demonstrate that the various solution curves for the single and…
A soliton explosion is an instability whereby a dissipative soliton undergoes a sudden structural collapse, but remarkably returns back to its original shape after a short transient. We recently reported the first experimental observation of this effect in a fiber laser (A. F. J. Runge et al., Optica 2, 36 (2015)). Here, we expand on our initial work, presenting a more detailed experimental and numerical study of the characteristics and dynamics of soliton explosions in passively mode-locked fiber lasers. Specifically, we explore different cavity configurations and gain levels, observing and c…
The self-starting dynamics of a model for passively mode-locked lasers with saturable absorber, in which the optical amplifier has a saturable nonlinearity, is examined. The basic assumption is that the laser will operate in the mode-locked regime when the continuous-wave regime becomes unstable. Within the framework of the modulational-instability analysis, a global map for the laser self-starting criteria is constructed. According to this map, the saturable nonlinearity enhances the input-field intensity required for laser self-starting. Analytical expression of the zero modulation-frequency…
We report on the observation of bound states of gain-guided solitons (GGSs) in a dispersion-managed erbium-doped fiber laser operating in the normal net cavity dispersion regime. Despite of the fact that the GGS is a chirped soliton and there is strong pulse stretching and compression along the cavity in the laser, the bound solitons observed have a fixed pulse separation, which is invariant to the pump strength change. Numerical simulation confirmed the experimental observations.
Breathing solitons are nonlinear waves in which the energy concentrates in a localized and oscillatory fashion. Similarly to stationary solitons, breathers in dissipative systems can form stable bound states displaying molecule-like dynamics, which are frequently called breather molecules. So far, the experimental observation of optical breather molecules and the real-time detection of their dynamics have been limited to diatomic molecules, that is, bound states of only two breathers. In this work, we report on the observation of different types of breather complexes in a mode-locked fibre las…
We report results of numerical simulations on the multiple soliton generation and soliton energy quantization in a soliton fiber ring laser passively mode-locked by using the nonlinear polarization rotation technique. We found numerically that the formation of multiple solitons in the laser is caused by a peak power limiting effect of the laser cavity. It is also the same effect that suppresses the soliton pulse collapse, an intrinsic feature of solitons propagating in the gain media, and makes the solitons stable in the laser. Furthermore, we show that the soliton energy quantization observed…
We report on the experimental observation of period-doubling bifurcation of dissipative-soliton-resonance (DSR) pulses in a fiber laser passively mode-locked by using the nonlinear optical loop mirror. Increasing the pump power of the fiber laser, we show that temporally a stable, uniform DSR pulse train could be transformed into a period-doubling state, exhibiting two sets of pulse parameters between the adjacent cavity roundtrip. It is found that DSR pulses in the period-doubling state could maintain the typical feature of DSR pulse: fixed pulse peak power and linear variation in pulse width…
Femtosecond frequency combs have boosted progress in various fields of precision metrology. Nevertheless, demanding applications such as front-end frequency and time standards, ultrastable microwave generation or high-resolution spectroscopy still necessitate improved stability. The spectral bandwidth and absolute position of individual comb lines are crucial in this context. Typically, both parameters are controlled on short and long time scales by tight locking to external optical and microwave references which represent costly and cumbersome additions to the entire setup. Here, we demonstra…
Black phosphorus (BP) with its enticing electric and optical properties is intensely researched in the field of optoelectronics. In this paper, Q-switched pulses at 1550 nm and 2 um wavelengths are obtained by inserting bulk-structured BP based saturable absorber (SA) into an erbium-doped fiber laser (EDFL) and an thulium/holmium-doped fiber laser (THDFL), respectively. The BP-SA was prepared by depositing powered BP material on to the flat side of a side-polished single mode fiber. Q-switched 1550 nm pulses with width tuned from 9.35 to 31 us were obtained for the EDFL. For the THDFL, over 10…
In this paper, we analyze the dynamics and formation mechanisms of bound states (BSs) of light bullets in the output of a laser coupled to a distant saturable absorber. First we approximate the full three-dimensional set of Haus master equations by a reduced equation governing the dynamics of the transverse profile. This effective theory allows us to perform a detailed multiparameter bifurcation study and to identify the different mechanisms of instability of BSs. In addition, our analysis reveals a non-intuitive dependence of the stability region as a function of the linewidth enhancement fac…
In this work we demonstrate comprehensive studies on graphene oxide (GO) and reduced graphene oxide (rGO) based saturable absorbers (SA) for mode-locking of Er-doped fiber lasers. The paper describes the fabrication process of both saturable absorbers and detailed comparison of their parameters. Our results show, that there is no significant difference in the laser performance between the investigated SA. Both provided stable, mode-locked operation with sub-400 fs soliton pulses and more than 9 nm optical bandwidth at 1560 nm center wavelength. It has been shown that GO might be successfully u…
We show that the pumping current is a convenient parameter for manipulating the temporal Localized Structures (LSs), also called localized pulses, found in passively mode-locked Vertical-Cavity Surface-Emitting Lasers. While short electrical pulses can be used for writing and erasing individual LSs, we demonstrate that a current modulation introduces a temporally evolving parameter landscape allowing to control the position and the dynamics of LSs. We show that the localized pulses drifting speed in this landscape depends almost exclusively on the local parameter value instead of depending on …
In this paper, we analyze the formation and dynamical properties of discrete light bullets (dLBs) in an array of passively mode-locked lasers coupled via evanescent fields in a ring geometry. Using a generic model based upon a system of nearest-neighbor coupled Haus master equations we show numerically the existence of dLBs for different coupling strengths. In order to reduce the complexity of the analysis, we approximate the full problem by a reduced set of discrete equations governing the dynamics of the transverse profile of the dLBs. This effective theory allows us to perform a detailed bi…
Dual-comb lasers from which asynchronous ultrashort pulses can be simultaneously generated have recently become an interesting research subject. They could be an intriguing alternative to the current dual-laser optical-frequency-comb source with highly sophisticated electronic control systems. If generated through a common light path traveled by all pulses, the common-mode noises between the spectral lines of different pulse trains could be significantly reduced. Therefore, coherent dual-comb generation from a completely common-path, unidirectional lasing cavity would be an interesting territo…
We propose an all-fiber mode-locking device which operates based on nonlinear switching in a novel concentric ring core fiber structure. The design is particularly attractive given the ease of fabrication and coupling to other components in a mode-locked fiber laser cavity. The nonlinear switching in this coupler is studied and the relative power transmission is obtained. The analysis shows that this nonlinear switch is practical for mode-locking fiber lasers and is forgiving to fabrication errors.
In this paper, we analyze the effect of optical feedback on the dynamics of a passively mode-locked ring laser operating in the regime of temporal localized structures. This laser system is modeled by a system of delay differential equations, which include delay terms associated with the laser cavity and the feedback loop. Using a combination of direct numerical simulations and path-continuation techniques, we show that the feedback loop creates echos of the main pulse whose position and size strongly depend on the feedback parameters. We demonstrate that in the long-cavity regime, these echos…
Recently, the existence of robust three-dimensional light bullets (LBs) was predicted theoretically in the output of a laser coupled to a distant saturable absorber. In this manuscript, we analyze the stability and the range of existence of these dissipative localized structures and provide guidelines and realistic parameter sets for their experimental observation. In order to reduce the complexity of the analysis, we first approximate the three-dimensional problem by a reduced equation governing the dynamics of the transverse profile. This effective theory provides an intuitive picture of the…
With the proposal of dual-wavelength pumping (DWP) scheme, DWP Er:ZBLAN fiber lasers at 3.5 um have become a fascinating area of research. However, limited by the absence of suitable saturable absorber, passively Q-switched and mode-locked fiber lasers have not been realized in this spectral region. Based on the layer-dependent bandgap and excellent photoelectric characteristics of black phosphorus (BP), BP is a promising candidate for saturable absorber near 3.5 um. Here, we fabricated a 3.5-um saturable absorber mirror (SAM) by transferring liquid-phase exfoliated BP flakes onto a gold-coate…
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94μm, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical diagnostics
The dynamics and stability of continuous-wave and multi-pulse structures are studied theoretically, for a generalized model of passively mode-locked fiber laser with an arbitrary nonlinearity. The model is characterized by a complex Ginzburg-Landau equation with saturable nonlinearity of a general form ($I^m/(1+ΓI)^n$), where $I$ is the field intensity, $m$ and $n$ are two positive real numbers and $Γ$ is the optical field saturation power. The analysis of fixed-point solutions of the governing equations, reveals an interesting loci of singular points in the amplitude-frequency plane consistin…
Low cost, small footprint, highly efficient and mass producible on-chip wavelength-division-multiplexing (WDM) light sources are key components in future silicon electronic and photonic integrated circuits (EPICs) which can fulfill the rapidly increasing bandwidth and lower energy per bit requirements. We present here, for the first time, a low noise high-channel-count 20 GHz passively mode-locked quantum dot laser grown on complementary metal-oxide-semiconductor compatible on-axis (001) silicon substrate. The laser demonstrates a wide mode-locking regime in the O-band. A record low timing jit…
We have used injection locking to multiply the repetition rate of a passively mode-locked femtosecond fiber laser from 40 MHz to 1 GHz while preserving optical phase coherence between the master laser and the slave output. The system is implemented almost completely in fiber and incorporates gain and passive saturable absorption. The slave repetition rate is set to a rational harmonic of the master repetition rate, inducing pulse formation at the least common multiple of the master and slave repetition rates.
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave passively mode-locked Er:ZBLAN fiber laser is demonstrated at the wavelength of 2.8 um, which delivers a maximum average output power of 613 mW, a repetition rate of 24 MHz and a pulse duration of 42 ps. To the best of our knowledge, it is the first time to demonstrate black phosphorus mode-locked laser at 2.8 um wavelength. Our results demonstrate the feasib…
We report mode-locked ~1550 nm output of transform-limited ~180 fs pulses from a large mode-area (diameter ~ 50 μm) guided-wave erbium fluorozirconate glass laser. The passively mode-locked oscillator generates pulses with 25 nm bandwidth at 156 MHz repetition rate and peak-power of 260 W. Scalability to higher repetition rate is demonstrated by transform-limited 410 fs pulse output at 1.3 GHz. To understand the origins of the broad spectral output, the laser cavity is simulated by using a numerical solution to the Ginzburg-Landau equation. This paper reports the widest bandwidth and shortest …
We propose a Watt-level, all-fiber, ultrafast Er/Yb-codoped double-clad fiber laser passively mode-locked by reduced graphene oxide (rGO) interacting with a weak evanescent field of photonic crystal fiber (PCF). The rGO solution is filled into the cladding holes of the PCF based on total reflection, and after evaporation, the rGO flakes bear only 1/107 of the total energy in laser system, which enhances the thermal damage threshold and decreases the accumulated nonlinearity. By incorporating the saturable absorber into an Er/Yb-codoped fiber ring cavity, stable conventional soliton with a dura…
We report on the experimental observation of a novel type of polarization locked vector soliton in a passively mode-locked fiber laser. The vector soliton is characterized by that not only the two orthogonally polarized soliton components are phase locked, but also one of the components has a double-humped intensity profile. Multiple such phase-locked high order vector solitons with identical soliton parameters and harmonic mode-locking of the vector solitons were also obtained in the laser. Numerical simulations confirmed the existence of stable high-order vector solitons in fiber lasers.
