Microwave photonic fractional Hilbert transformer with an integrated optical soliton crystal micro-comb
Mengxi Tan, Xingyuan Xu, Bill Corcoran, Jiayang Wu, Andreas Boes, Thach G. Nguyen, Sai T. Chu, Brent E. Little, Roberto Morandotti, Arnan Mitchell, David J. Moss
备注：
12 pages, 7 figures, 61 references
发表信息：
IEEE Journal of Lightwave Technology, Volume 37, (2019)
We report a photonic microwave and RF fractional Hilbert transformer based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 50GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the transformer. By programming and shaping the comb lines according to calculated tap weights, we achieve both arbitrary fractional orders and a broad operation bandwidth. We experimentally characterize the RF amplitude and phase response for different fractional orders and perform system demonstrations of real-time fractional Hilbert transforms. We achieve a phase ripple of < 0.15 rad within the 3-dB pass-band, with bandwidths ranging from 5 to 9 octaves, depending on the order. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a new way to implement high-performance fractional Hilbert transformers with broad processing bandwidth, high reconfigurability, and greatly reduced size and complexity.
Microcombs are powerful tools as sources of multiple wavelength channels for photonic RF signal processing. They offer a compact device footprint, large numbers of wavelengths, and wide Nyquist bands. Here, we review recent progress on microcomb-based photonic RF signal processors, including true time delays, reconfigurable filters, Hilbert transformers, differentiators, and channelizers. The strong potential of optical micro-combs for RF photonics applications in terms of functions and integrability is also discussed.
Dissipative Kerr soliton microcombs in microresonators has enabled fundamental advances in chip scale precision metrology, communication, spectroscopy, and parallel signal processing. Here we demonstrate polarization diverse soliton transitions and deterministic switching dynamics of a self stabilized microcomb in a strongly coupled dispersion-managed microresonator driven with a single pump laser. The switching dynamics are induced by the differential thermorefractivity between coupled transverse magnetic and transverse electric supermodes during the forward backward pump detunings. The achie…
Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) are promising to realize chip scale integration of full soliton comb systems providing high precision, broad spectral coverage and a coherent link to the micro/mm/THz domain with diverse applications coming on line all the time. However, the large soliton comb spacing hampers some applications. For example, for spectroscopic applications, there are simply not enough comb lines available to sufficiently cover almost any relevant absorption features. Here, we overcome this limitation by scanning the comb mode spacing …
Dissipative solitons rely on the double balance between nonlinearity and dispersion as well as gain and loss have attracted a lot of attention in optics, since it gives rise to ultrashort pulses and broadband frequency combs with good stability and smooth spectral envelopes. Here we observe a novel dissipative solitons in microwave photonics that gives rise to wideband tunable frequency hopping microwave signals with fast frequency switching speed. The dissipative microwave photonic solitions are achieved through the double balance between nonlinear gain saturation and linear filtering as well…
Soliton crystal micro-combs are powerful tools as sources of multiple wavelength channels for radio frequency (RF) signal processing. They offer a compact device footprint, large numbers of wavelengths, very high versatility, and wide Nyquist bandwidths. Here, we demonstrate integral order RF signal processing functions based on a soliton crystal micro-comb, including a Hilbert transformer and first- to third-order differentiators. We compare and contrast results achieved and the tradeoffs involved with varying comb spacing, tap design methods, as well as shaping methods.
We report the thermal control of a dissipative Kerr microresonator soliton comb via an optical sideband generated from an electro-optic modulator. Same as the previous reports using an independent auxiliary laser, our sideband-based (S-B) auxiliary light also enables to access a stable soliton comb and to reduce the phase noise of the soliton comb, greatly simplifying the setup with an auxiliary laser. More importantly, because of the intrinsically high frequency/phase correlation between the pump and S-B auxiliary light, the detuning between the pump and resonance frequency is automatically a…
Optical frequency combs have revolutionized frequency metrology and timekeeping, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a broad bandwidth with low power consumption, unprecedented form factor, wafer scale fabrication compatibility. For future high volume applications, integration and electrical pumping of soliton microcom…
Photonic chip-based soliton microcombs have shown rapid progress and have already been used in many system-level applications, including coherent communications, astrophysical spectrometer calibration and ultrafast ranging. While there has been substantial progress in realizing soliton microcombs that rely on compact laser diodes, culminating in devices that only utilize a semiconductor amplifier or a self-injection-locked laser as a pump source, accessing and generating single soliton states with electronically detectable line rates from a compact laser module has remained challenging. Here w…
Microcavity solitons enable miniaturized coherent frequency comb sources. However, the formation of microcavity solitons can be disrupted by stimulated Raman scattering (SRS), particularly in the emerging crystalline microcomb materials with high Raman gain. Here, we propose and implement dissipation control---tailoring the energy dissipation of selected cavity modes---to purposely raise/lower the threshold of Raman lasing in a strongly Raman-active lithium niobate microring resonator, and realize on-demand soliton mode-locking or Raman lasing. Numerical simulations are carried out to confirm …
Microresonator-based optical frequency combs emitted from high-quality-factor microresonators, also known as microcombs, have opened up new horizons to areas of optical frequency comb technology including frequency metrology, precision sensing, and optical communication. To extend the capability of microcombs for such applications, large and reliable tunability is of critical importance. Here, we show broad spectral tuning of Kerr soliton microcombs in a thermally controlled crystalline microresonator with pump-detuning stabilization. The fundamental elements composing frequency combs, namely …
Microwave photonic technologies, which upshift the carrier into the optical domain to facilitate the generation and processing of ultrawide-band electronic signals at vastly reduced fractional bandwidths, have the potential to achieve superior performance compared to conventional electronics for targeted functions. For microwave photonic applications such as filters, coherent radars, subnoise detection, optical communications and low-noise microwave generation, frequency combs are key building blocks. By virtue of soliton microcombs, frequency combs can now be built using CMOS compatible photo…
Silicon photonics enables wafer-scale integration of optical functionalities on chip. A silicon-based laser frequency combs could significantly expand the applications of silicon photonics, by providing integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent LiDAR, or photonics-assisted signal processing. Here, we report on heterogeneously integrated laser soliton microcombs combining both InP/Si semiconductor lasers and ultralow-loss silicon nitride microresonators on monolithic silicon substrate. Thousands of devices are produced from a sing…
While soliton microcombs offer the potential for integration of powerful frequency metrology and precision spectroscopy systems, their operation requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components. Moreover, CMOS-rate microcombs, required in nearly all comb systems, have resisted integration because of their power requirements. Here, a regime for turnkey operation of soliton microcombs co-integrated with a pump laser is demonstrated and theoretically explained. Significantly, a new operating point is shown to appear from whi…
We report a broadband microwave frequency converter based on a coherent Kerr optical micro-comb generated by an integrated micro-ring resonator. The coherent micro-comb displays features that are consistent with soliton crystal dynamics with an FSR of 48.9GHz. We use this to demonstrate a high-performance millimeter-wave local oscillator at 48.9GHz in the Q-band for microwave frequency conversion. We experimentally verify the microwave performance up to 40 GHz, achieving a ratio of 6.8 dB between output RF power and IF power and a spurious suppression ratio of > 43.5 dB. The experimental resul…
Soliton microcombs constitute chip-scale optical frequency combs, and have the potential to impact a myriad of applications from frequency synthesis and telecommunications to astronomy. The requirement on external driving lasers has been significantly relaxed with the demonstration of soliton formation via self-injection locking of the pump laser to the microresonator. Yet to date, the dynamics of this process has not been fully understood. Prior models of self-injection locking were not able to explain sufficiently large detunings, crucial for soliton formation. Here we develop a theoretical …
Self-referenced dissipative Kerr solitons (DKSs) based on optical microresonators offer prominent characteristics including miniaturization, low power consumption, broad spectral range and inherent coherence for various applications such as precision measurement, communications, microwave photonics, and astronomical spectrometer calibration. To date, octave-spanning DKSs with a free spectral range (FSR) of ~1 THz have been achieved only in ultrahigh-Q silicon nitride microresonators, with elaborate wavelength control required. Here we demonstrate an octave-spanning DKS in an aluminium nitride …
We report a 92 channel RF channelizer based on a 48.9 GHz integrated micro-comb that operates via soliton crystals, together with a passive high-Q ring resonator that acts as a periodic filter with an optical 3dB bandwidth of 121.4 MHz. We obtain an instant RF bandwidth of 8.08 GHz and 17.55 GHz achieved through temperature tuning. These results represent a major advance to achieving fully integrated photonic RF spectrum channelizers with reduced low complexity, size, and high performance for digital-compatible signal detection and broadband analog signal processing.
With demonstrated applications ranging from metrology to telecommunications, soliton microresonator frequency combs have emerged over the past decade as a remarkable new technology. However, standard implementations only allow for the generation of combs whose repetition rate is tied close to the fundamental resonator free-spectral range (FSR), offering little or no dynamic control over the comb line spacing. Here we propose and experimentally demonstrate harmonic and rational harmonic driving as novel techniques that allow for the robust generation of soliton frequency combs with discretely a…
The synthesis of ultralow-noise microwaves is of both scientific and technological relevance for timing, metrology, communications and radio-astronomy. Today, the lowest reported phase noise signals are obtained via optical frequency-division using mode-locked laser frequency combs. Nonetheless, this technique ideally requires high repetition rates and tight comb stabilisation. Here, a soliton microcomb with a 14 GHz repetition rate is generated with an ultra-stable pump laser and used to derive an ultralow-noise microwave reference signal, with an absolute phase noise level below -60 dBc/Hz a…
Advances in microresonator-based soliton generation promise chip-scale integration of optical frequency comb for applications spanning from time keeping to frequency synthesis. Miniaturized cavities harness Kerr nonlinearity and enable terahertz soliton repetition rates. However, such high repetition rates are not amenable to direct electronic detection. Here, we demonstrate hybrid Kerr and electro-optic microcombs using the lithium niobate thin film that exhibits both Kerr and Pockels nonlinearities. By interleaving the high-repetition-rate Kerr soliton comb with the low-repetition-rate elect…
Continuous-wave-driven Kerr nonlinear microresonators give rise to self-organization in terms of dissipative Kerr solitons, which constitute optical frequency combs that can be used to generate low-noise microwave signals. Here, by applying either amplitude or phase modulation to the driving laser we create an intracavity potential trap, to discipline the repetition rate of the solitons. We demonstrate that this effect gives rise to a novel spectral purification mechanism of the external microwave signal frequency, leading to reduced phase noise of the output signal. We experimentally observe …
