This paper presents a new approach to recognize elements in floor plan layouts. Besides walls and rooms, we aim to recognize diverse floor plan elements, such as doors, windows and different types of rooms, in the floor layouts. To this end, we model a hierarchy of floor plan elements and design a deep multi-task neural network with two tasks: one to learn to predict room-boundary elements, and the other to predict rooms with types. More importantly, we formulate the room-boundary-guided attention mechanism in our spatial contextual module to carefully take room-boundary features into account to enhance the room-type predictions. Furthermore, we design a cross-and-within-task weighted loss to balance the multi-label tasks and prepare two new datasets for floor plan recognition. Experimental results demonstrate the superiority and effectiveness of our network over the state-of-the-art methods.
Simon Fraser University（西蒙弗雷泽大学）；Washington University in St. Louis（华盛顿大学圣路易斯分校）
This paper proposes a new approach for automated floorplan reconstruction from RGBD scans, a major milestone in indoor mapping research. The approach, dubbed Floor-SP, formulates a novel optimization problem, where room-wise coordinate descent sequentially solves dynamic programming to optimize the floorplan graph structure. The objective function consists of data terms guided by deep neural networks, consistency terms encouraging adjacent rooms to share corners and walls, and the model complexity term. The approach does not require corner/edge detection with thresholds, unlike most other meth…
Avon Old Farms School（埃文老农场中学）；University of Wisconsin-Madison（威斯康星大学麦迪逊分校）
Recognition of floor plans has been a challenging and popular task. Despite that many recent approaches have been proposed for this task, they typically fail to make the room-level unified prediction. Specifically, multiple semantic categories can be assigned in a single room, which seriously limits their visual quality and applicability. In this paper, we propose a novel approach to recognize the floor plan layouts with a newly proposed Offset-Guided Attention mechanism to improve the semantic consistency within a room. In addition, we present a Feature Fusion Attention module that leverages …
National Tsing Hua University（台湾清华大学）；Phiar Technologies（Phiar科技公司）
We present 360-DFPE, a sequential floor plan estimation method that directly takes 360-images as input without relying on active sensors or 3D information. Our approach leverages a loosely coupled integration between a monocular visual SLAM solution and a monocular 360-room layout approach, which estimate camera poses and layout geometries, respectively. Since our task is to sequentially capture the floor plan using monocular images, the entire scene structure, room instances, and room shapes are unknown. To tackle these challenges, we first handle the scale difference between visual odometry …
Brown University（布朗大学）；Simon Fraser University（西蒙弗雷泽大学）
Realistic 3D indoor scene datasets have enabled significant recent progress in computer vision, scene understanding, autonomous navigation, and 3D reconstruction. But the scale, diversity, and customizability of existing datasets is limited, and it is time-consuming and expensive to scan and annotate more. Fortunately, combinatorics is on our side: there are enough individual rooms in existing 3D scene datasets, if there was but a way to recombine them into new layouts. In this paper, we propose the task of generating novel 3D floor plans from existing 3D rooms. We identify three sub-tasks of …
IHome Company（IHome公司）；IBM Research Singapore（IBM新加坡研究院）；Radio Company（Radio公司）；Huazhong University of Science and Technology（华中科技大学）；Tongji University（同济大学）
In this paper, we propose an end-end model for producing furniture layout for interior scene synthesis from the random vector. This proposed model is aimed to support professional interior designers to produce the interior decoration solutions more quickly. The proposed model combines a conditional floor-plan module of the room, a conditional graphical floor-plan module of the room and a conditional layout module. As compared with the prior work on scene synthesis, our proposed three modules enhance the ability of auto-layout generation given the dimensional category of the room. We conduct ou…
University of Freiburg（弗莱堡大学）；Toyota Research Institute（丰田研究院）
Indoor localization is one of the crucial enablers for deployment of service robots. Although several successful techniques for indoor localization have been proposed, the majority of them relies on maps generated from data gathered with the same sensor modality used for localization. Typically, tedious labor by experts is needed to acquire this data, thus limiting the readiness of the system as well as its ease of installation for inexperienced operators. In this paper, we propose a memory and computationally efficient monocular camera-based localization system that allows a robot to estimate…
We present a novel approach to align partial 3D reconstructions which may not have substantial overlap. Using floorplan priors, our method jointly predicts a room layout and estimates the transformations from a set of partial 3D data. Unlike the existing methods relying on feature descriptors to establish correspondences, we exploit the 3D "box" structure of a typical room layout that meets the Manhattan World property. We first estimate a local layout for each partial scan separately and then combine these local layouts to form a globally aligned layout with loop closure. Without the requirem…
Graz University of Technology（格拉茨技术大学）；École des Ponts ParisTech（巴黎高科路桥学院）
We propose a novel method for reconstructing floor plans from noisy 3D point clouds. Our main contribution is a principled approach that relies on the Monte Carlo Tree Search (MCTS) algorithm to maximize a suitable objective function efficiently despite the complexity of the problem. Like previous work, we first project the input point cloud to a top view to create a density map and extract room proposals from it. Our method selects and optimizes the polygonal shapes of these room proposals jointly to fit the density map and outputs an accurate vectorized floor map even for large complex scene…
This paper presents a deep learning-based point cloud processing method named FloorPP-Net for the task of Scan-to-BIM (building information model). FloorPP-Net first converts the input point cloud of a building story into point pillars (PP), then predicts the corners and edges to output the floor plan. Altogether, FloorPP-Net establishes an end-to-end supervised learning framework for the Scan-to-Floor-Plan (Scan2FP) task. In the 1st International Scan-to-BIM Challenge held in conjunction with CVPR 2021, FloorPP-Net was ranked the second runner-up in the floor plan reconstruction track. Future…
In this paper, we propose SUGAMAN (Supervised and Unified framework using Grammar and Annotation Model for Access and Navigation). SUGAMAN is a Hindi word meaning "easy passage from one place to another". SUGAMAN synthesizes textual description from a given floor plan image for the visually impaired. A visually impaired person can navigate in an indoor environment using the textual description generated by SUGAMAN. With the help of a text reader software, the target user can understand the rooms within the building and arrangement of furniture to navigate. SUGAMAN is the first framework for de…
3D Scene Graph Prediction: Generating Hierarchical Models from Partially Observed Environments
Laboratory for Information & Decision Systems (LIDS), Massachusetts Institute of Technology（信息与决策系统实验室（LIDS），麻省理工学院）；Department of Electrical and Computer Engineering, Oakland University（奥克兰大学电气与计算机工程系）
FloorSAM: SAM-Guided Floorplan Reconstruction with Semantic-Geometric Fusion
College of Information Engineering, Zhejiang University of Technology（浙江工业大学信息工程学院）；Joint Laboratory of Industrial Intelligent Technologies, Russia, China（中俄工业智能技术联合实验室）；Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences（中国科学院宁波材料技术与工程研究所）；United Institute of Informatics Problems of the National Academy of Belarus（白俄罗斯国家科学院信息问题联合研究所）；Saint Petersburg Federal Research Center of the Russian Academy of Sciences（俄罗斯科学院圣彼得堡联邦科研中心）
GRE-Diff: Gaussian Room Embeddings for Structured Layout Diffusion
Guangdong Provincial Key Laboratory of Visual Media and Multidimensional Intelligence, CSSE, Shenzhen University（广东省视觉媒体与多维智能重点实验室，计算机科学与软件学院，深圳大学）；School of Computer Science, University of Guelph（圭尔夫大学计算机科学学院）
Human beings understand natural language description and could able to imagine a corresponding visual for the same. For example, given a description of the interior of a house, we could imagine its structure and arrangements of furniture. Automatic synthesis of real-world images from text descriptions has been explored in the computer vision community. However, there is no such attempt in the area of document images, like floor plans. Floor plan synthesis from sketches, as well as data-driven models, were proposed earlier. Ours is the first attempt to render building floor plan images from tex…
In this paper, we present a GNN-based Line Segment Parser (GLSP), which uses a junction heatmap to predict line segments' endpoints, and graph neural networks to extract line segments and their categories. Different from previous floor plan recognition methods, which rely on semantic segmentation, our proposed method is able to output vectorized line segment and requires less post-processing steps to be put into practical use. Our experiments show that the methods outperform state-of-the-art line segment detection models on multi-class line segment detection tasks with floor plan images. In th…
TLC-Plan: A Two-Level Codebook Based Network for End-to-End Vector Floorplan Generation
Hubei Key Laboratory of Transportation Internet of Things, School of Computer Science and Artificial Intelligence, Wuhan University of Technology（湖北交通物联网重点实验室，计算机科学与人工智能学院，武汉理工大学）；School of Information Engineering, Nanchang University（信息工程学院，南昌大学）
We introduce a learning framework for automated floorplan generation which combines generative modeling using deep neural networks and user-in-the-loop designs to enable human users to provide sparse design constraints. Such constraints are represented by a layout graph. The core component of our learning framework is a deep neural network, Graph2Plan, which converts a layout graph, along with a building boundary, into a floorplan that fulfills both the layout and boundary constraints. Given an input building boundary, we allow a user to specify room counts and other layout constraints, which …
Bangladesh University of Engineering and Technology（孟加拉国工程技术大学）
Reconstructing a layout of indoor spaces has been a crucial part of growing indoor location based services. One of the key challenges in the proliferation of indoor location based services is the unavailability of indoor spatial maps due to the complex nature of capturing an indoor space model (e.g., floor plan) of an existing building. In this paper, we propose a system to automatically generate floor plans that can recognize rooms from the point-clouds obtained through smartphones like Google's Tango. In particular, we propose two approaches - a Recurrent Neural Network based approach using …
This paper focuses on the task of room layout estimation from a monocular RGB image. Prior works break the problem into two sub-tasks: semantic segmentation of floor, walls, ceiling to produce layout hypotheses, followed by an iterative optimization step to rank these hypotheses. In contrast, we adopt a more direct formulation of this problem as one of estimating an ordered set of room layout keypoints. The room layout and the corresponding segmentation is completely specified given the locations of these ordered keypoints. We predict the locations of the room layout keypoints using RoomNet, a…
Floor plans are the basis of reasoning in and communicating about indoor environments. In this paper, we show that by modelling floor plans as sequences of line segments seen from a particular point of view, recent advances in autoregressive sequence modelling can be leveraged to model and predict floor plans. The line segments are canonicalized and translated to sequence of tokens and an attention-based neural network is used to fit a one-step distribution over next tokens. We fit the network to sequences derived from a set of large-scale floor plans, and demonstrate the capabilities of the m…
In recent years, floor plan segmentation has gained significant attention due to its wide range of applications in floor plan reconstruction and robotics. In this paper, we propose a novel 2D floor plan segmentation technique based on a down-sampling approach. Our method employs continuous down-sampling on a floor plan to maintain its structural information while reducing its complexity. We demonstrate the effectiveness of our approach by presenting results obtained from both cluttered floor plans generated by a vacuum cleaning robot in unknown environments and a benchmark of floor plans. Our …
National Tsing Hua University（国立清华大学）；KAUST（沙特阿拉伯国王科技大学）
We present a deep learning framework, called DuLa-Net, to predict Manhattan-world 3D room layouts from a single RGB panorama. To achieve better prediction accuracy, our method leverages two projections of the panorama at once, namely the equirectangular panorama-view and the perspective ceiling-view, that each contains different clues about the room layouts. Our network architecture consists of two encoder-decoder branches for analyzing each of the two views. In addition, a novel feature fusion structure is proposed to connect the two branches, which are then jointly trained to predict the 2D …
University of Electronic Science and Technology of China（电子科技大学）；Hikvision Research Institute（海康威视研究院）；Manycore Tech Inc. (Kujiale)（摩芯科技有限公司（酷家乐））；University of California, Berkeley（加利福尼亚大学伯克利分校）
Single-image room layout reconstruction aims to reconstruct the enclosed 3D structure of a room from a single image. Most previous work relies on the cuboid-shape prior. This paper considers a more general indoor assumption, i.e., the room layout consists of a single ceiling, a single floor, and several vertical walls. To this end, we first employ Convolutional Neural Networks to detect planes and vertical lines between adjacent walls. Meanwhile, estimating the 3D parameters for each plane. Then, a simple yet effective geometric reasoning method is adopted to achieve room layout reconstruction…
We present a new approach to the problem of estimating the 3D room layout from a single panoramic image. We represent room layout as three 1D vectors that encode, at each image column, the boundary positions of floor-wall and ceiling-wall, and the existence of wall-wall boundary. The proposed network, HorizonNet, trained for predicting 1D layout, outperforms previous state-of-the-art approaches. The designed post-processing procedure for recovering 3D room layouts from 1D predictions can automatically infer the room shape with low computation cost - it takes less than 20ms for a panorama image…
School of Control Science and Engineering, Shandong University（山东大学控制科学与工程学院）；Google Research（谷歌研究院）
The task of room layout estimation is to locate the wall-floor, wall-ceiling, and wall-wall boundaries. Most recent methods solve this problem based on edge/keypoint detection or semantic segmentation. However, these approaches have shown limited attention on the geometry of the dominant planes and the intersection between them, which has significant impact on room layout. In this work, we propose to incorporate geometric reasoning to deep learning for layout estimation. Our approach learns to infer the depth maps of the dominant planes in the scene by predicting the pixel-level surface parame…
This paper presents a new approach for the recognition of elements in floor plan layouts. Besides of elements with common shapes, we aim to recognize elements with irregular shapes such as circular rooms and inclined walls. Furthermore, the reduction of noise in the semantic segmentation of the floor plan is on demand. To this end, we propose direction-aware, learnable, additive kernels in the application of both the context module and common convolutional blocks. We apply them for high performance of elements with both common and irregular shapes. Besides, an adversarial network with two disc…
Institute for Computer Graphics and Vision, Graz University of Technology（格拉茨技术大学计算机图形与视觉研究所）；Université Paris-Est（巴黎东大学）；École des Ponts ParisTech（巴黎路桥学院）
We propose a novel method applicable in many scene understanding problems that adapts the Monte Carlo Tree Search (MCTS) algorithm, originally designed to learn to play games of high-state complexity. From a generated pool of proposals, our method jointly selects and optimizes proposals that minimize the objective term. In our first application for floor plan reconstruction from point clouds, our method selects and refines the room proposals, modelled as 2D polygons, by optimizing on an objective function combining the fitness as predicted by a deep network and regularizing terms on the room s…
Wuhan University of Technology（武汉理工大学）；University of Twente（代尔夫特理工大学）；Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences（中国科学院大学杭州高等研究院）；The Advanced Laser Technology Laboratory of Anhui Province（安徽省先进激光技术实验室）
Amrita Vishwa Vidyapeetham（阿姆里塔维什瓦维迪亚皮特姆大学）；RBG.AI, Resilience Business Grids LLP（RBG.AI，韧性商业网格有限责任公司）
Building Information Modelling (BIM) software use scalable vector formats to enable flexible designing of floor plans in the industry. Floor plans in the architectural domain can come from many sources that may or may not be in scalable vector format. The conversion of floor plan images to fully annotated vector images is a process that can now be realized by computer vision. Novel datasets in this field have been used to train Convolutional Neural Network (CNN) architectures for object detection. Image enhancement through Super-Resolution (SR) is also an established CNN based network in compu…
Washington University in St. Louis（圣路易斯华盛顿大学）；Massachusetts Institute of Technology（麻省理工学院）；Microsoft Research（微软研究院）
Inference of correspondences between images from different modalities is an extremely important perceptual ability that enables humans to understand and recognize cross-modal concepts. In this paper, we consider an instance of this problem that involves matching photographs of building interiors with their corresponding floorplan. This is a particularly challenging problem because a floorplan, as a stylized architectural drawing, is very different in appearance from a color photograph. Furthermore, individual photographs by themselves depict only a part of a floorplan (e.g., kitchen, bathroom,…
ShanghaiTech University（上海科技大学）；Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences（中国科学院上海微系统与信息技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）；Shanghai Engineering Research Center of Intelligent Vision and Imaging（上海智能视觉与成像工程研究中心）
We present a novel framework for floor plan-based, full six degree-of-freedom LiDAR localization. Our approach relies on robust ceiling and ground plane detection, which solves part of the pose and supports the segmentation of vertical structure elements such as walls and pillars. Our core contribution is a novel nearest neighbour data structure for an efficient look-up of nearest vertical structure elements from the floor plan. The registration is realized as a pair-wise regularized windowed pose graph optimization. Highly efficient, accurate and drift-free long-term localization is demonstra…
We present the first self-supervised method to train panoramic room layout estimation models without any labeled data. Unlike per-pixel dense depth that provides abundant correspondence constraints, layout representation is sparse and topological, hindering the use of self-supervised reprojection consistency on images. To address this issue, we propose Differentiable Layout View Rendering, which can warp a source image to the target camera pose given the estimated layout from the target image. As each rendered pixel is differentiable with respect to the estimated layout, we can now train the l…
FloNa: Floor Plan Guided Embodied Visual Navigation
Beijing Institute of Technology（北京理工大学）；Yangtze Delta Region Academy of Beijing Institute of Technology（北京理工大学长三角研究院）；Beijing Racobit Electronic Information Technology Co., Ltd.（北京睿科比特电子信息技术有限公司）
FR-SLAM: A SLAM Improvement Method Based on Floor Plan Registration
Suzhou Campus Southeast University（东南大学苏州校区）；Nanjing center for applied mathematics（南京应用数学中心）；School of Automation（自动化学院）；School of Cyber Science and Engineering（网络科学与工程学院）；Shenzhen Research Institute Southeast University（东南大学深圳研究院）；Samsung Electronics（三星电子）；Samsung Electronics(China) R&D Center（三星电子（中国）研发中心）
This papers focuses on symbol spotting on real-world digital architectural floor plans with a deep learning (DL)-based framework. Traditional on-the-fly symbol spotting methods are unable to address the semantic challenge of graphical notation variability, i.e. low intra-class symbol similarity, an issue that is particularly important in architectural floor plan analysis. The presence of occlusion and clutter, characteristic of real-world plans, along with a varying graphical symbol complexity from almost trivial to highly complex, also pose challenges to existing spotting methods. In this pap…
Given a single RGB panorama, the goal of 3D layout reconstruction is to estimate the room layout by predicting the corners, floor boundary, and ceiling boundary. A common approach has been to use standard convolutional networks to predict the corners and boundaries, followed by post-processing to generate the 3D layout. However, the space-varying distortions in panoramic images are not compatible with the translational equivariance property of standard convolutions, thus degrading performance. Instead, we propose to use spherical convolutions. The resulting network, which we call OmniLayout pe…
We present a structured graph variational autoencoder for generating the layout of indoor 3D scenes. Given the room type (e.g., living room or library) and the room layout (e.g., room elements such as floor and walls), our architecture generates a collection of objects (e.g., furniture items such as sofa, table and chairs) that is consistent with the room type and layout. This is a challenging problem because the generated scene should satisfy multiple constrains, e.g., each object must lie inside the room and two objects cannot occupy the same volume. To address these challenges, we propose a…
Institute for Computer Graphics and Vision, Graz University of Technology（格拉茨技术大学计算机图形与视觉研究所）；Université Paris-Est, École des Ponts ParisTech（巴黎东大学，巴黎高科路桥学院）
We present a novel method to reconstruct the 3D layout of a room (walls, floors, ceilings) from a single perspective view in challenging conditions, by contrast with previous single-view methods restricted to cuboid-shaped layouts. This input view can consist of a color image only, but considering a depth map results in a more accurate reconstruction. Our approach is formalized as solving a constrained discrete optimization problem to find the set of 3D polygons that constitute the layout. In order to deal with occlusions between components of the layout, which is a problem ignored by previous…
