Dissipation-enabled hydrodynamic conductivity in a tunable bandgap semiconductor
Cheng Tan, Derek Y. H. Ho, Lei Wang, J. I. A. Li, Indra Yudhistira, Daniel A. Rhodes, Takashi Taniguchi, Kenji Watanabe, Kenneth Shepard, Paul L. McEuen, Cory R… 展开作者
Cheng Tan, Derek Y. H. Ho, Lei Wang, J. I. A. Li, Indra Yudhistira, Daniel A. Rhodes, Takashi Taniguchi, Kenji Watanabe, Kenneth Shepard, Paul L. McEuen, Cory R. Dean, Shaffique Adam, James Hone
备注：
Completely rewritten. Accepted for publication in Science Advances. 63 pages, 20 figures
Electronic transport in the regime where carrier-carrier collisions are the dominant scattering mechanism has taken on new relevance with the advent of ultraclean two-dimensional materials. Here we present a combined theoretical and experimental study of ambipolar hydrodynamic transport in bilayer graphene demonstrating that the conductivity is given by the sum of two Drude-like terms that describe relative motion between electrons and holes, and the collective motion of the electron-hole plasma. As predicted, the measured conductivity of gapless, charge-neutral bilayer graphene is sample- and temperature-independent over a wide range. Away from neutrality, the electron-hole conductivity collapses to a single curve, and a set of just four fitting parameters provides quantitative agreement between theory and experiment at all densities, temperatures, and gaps measured. This work validates recent theories for dissipation-enabled hydrodynamic conductivity and creates a link between semiconductor physics and the emerging field of viscous electronics.
The energy bandgap is an intrinsic character of semiconductors, which largely determines their properties. The ability to continuously and reversibly tune the bandgap of a single device during real time operation is of great importance not only to device physics but also to technological applications. Here we demonstrate a widely tunable bandgap of few-layer black phosphorus (BP) by the application of vertical electric field in dual-gated BP field-effect transistors. A total bandgap reduction of 124 meV is observed when the electrical displacement field is increased from 0.10V/nm to 0.83V/nm. …
A specific structure of doped graphene with substituted silicon impurity is introduced and ab. initio density-functional approach is applied for energy band structure calculation of proposed structure. Using the band structure calculation for different silicon sites in the host graphene, the effect of silicon concentration and unit cell geometry on the bandgap of the proposed structure is also investigated. Chemically silicon doped graphene results in an energy gap as large as 2eV according to DFT calculations. As we will show, in contrast to previous bandgap engineering methods, such structur…
Black phosphorus consists of stacked layers of phosphorene, a two-dimensional semiconductor with promising device characteristics. We report the realization of a widely tunable bandgap in few-layer black phosphorus doped with potassium using an in-situ surface doping technique. Through band-structure measurements and calculations, we demonstrate that a vertical electric field from dopants modulates the bandgap owing to the giant Stark effect and tunes the material from a moderate-gap semiconductor to a band-inverted semimetal. At the critical field of this band inversion, the material becomes …
Quantum dots (QDs) made from semiconductors are among the most promising platforms for the developments of quantum computing and simulation chips, and have advantages over other platforms in high density integration and in compatibility to the standard semiconductor chip fabrication technology. However, development of a highly tunable semiconductor multiple QD system still remains as a major challenge. Here, we demonstrate realization of a highly tunable linear quadruple QD (QQD) in a narrow bandgap semiconductor InAs nanowire with fine finger gate technique. The QQD is studied by electron tra…
Topological insulators, first observed in electronic systems, have inspired many analogues in photonic and phononic crystals in which remarkable one-way propagation edge states are supported by topologically nontrivial bandgaps. Such bandgaps can be achieved by breaking the time-reversal symmetry to lift the degeneracy associated with Dirac cones at the corners of the Brillouin zone. Here, we report on our construction of a phononic crystal exhibiting a Dirac-like cone in the Brillouin zone center. We demonstrate that simultaneously breaking the time-reversal symmetry and altering the geometri…
We explore the device potential of tunable-gap bilayer graphene FET exploiting the possibility of opening a bandgap in bilayer graphene by applying a vertical electric field via independent gate operation. We evaluate device behavior using atomistic simulations based on the self-consistent solution of the Poisson and Schroedinger equations within the NEGF formalism. We show that the concept works, but bandgap opening is not strong enough to suppress band-to-band tunneling in order to obtain a sufficiently large Ion/Ioff ratio for CMOS device operation.
Magnesium hydroxide (Mg(OH)2) has a layered brucite-like structure in its bulk form and was recently isolated as a new member of 2D monolayer materials. We investigated the electronic and optical properties of monolayer crystals of Mg(OH)2 and WS2 and their possible heterobilayer structure by means of first principles calculations. It was found that both monolayers of Mg(OH)2 and WS 2 are direct-gap semiconductors and these two monolayers form a typical van der Waals heterostructure with a weak interlayer interaction and a type-II band alignment with a staggered gap that spatially seperates el…
We report on composition controlled MoS$_{2}$ and MoO$_{x}$ (x=2 and 3) compounds electrodeposited on Flourine dopped Tin Oxide (FTO) substrate. It was observed that the relative content has systematic electrical and optical changes for different thicknesses of layers ranging from $\approx$20 to 540 nm. Optical and electrical bandgaps reveals a tuneable behavior by controlling the relative content of compounds as well as a sharp transition from p to n-type of semiconductivity. Moreover, spin-orbit interaction of Mo 3d doublet enhances by reduction of MoO$_{3}$ content in thicker films. Our res…
Berry curvature is analogous to magnetic field but in momentum space and is commonly present in materials with non-trivial quantum geometry. It endows Bloch electrons with transverse anomalous velocities to produce Hall-like currents even in the absence of a magnetic field. We report the direct observation of in situ tunable valley-selective Hall effect (VSHE), where inversion symmetry, and thus the geometric phase of electrons, is controllable by an out-of-plane electric field. We use high-quality bilayer graphene with an intrinsic and tunable bandgap, illuminated by circularly polarized mid-…
We study a single photon transmission through 1D N- qubit chain. The qubits are supposed to be identical with equal distance between neighbors. We express the transfer matrix of N- qubit chain in terms of Chebyshev polynomials, which allows us to obtain simple expressions for the transmission and reflection amplitudes for arbitrarily large N. If the distance between neighbor qubits is equal to half wavelength, the transmission spectrum exhibits a flat bandgap structure with very steep walls. We show that for odd N the tuning of the excitation frequency of a central qubit gives rise to the appe…
Compared to traditional pn-junction photovoltaics, hot carrier solar cells offer potentially higher efficiency by extracting work from the kinetic energy of photogenerated "hot carriers" before they cool to the lattice temperature. Hot carrier solar cells have been demonstrated in high-bandgap ferroelectric insulators and GaAs/AlGaAs heterostructures, but so far not in low-bandgap materials, where the potential efficiency gain is highest. Recently, a high open-circuit voltage was demonstrated in an illuminated wurtzite InAs nanowire with a low bandgap of 0.39 eV, and was interpreted in terms o…
Electric transport of double gated bilayer graphene devices is studied as a function of charge density and bandgap. A top gate electrode can be used to control locally the Fermi level to create a pn junction between the double-gated and single-gated region. These bilayer graphene pn diodes are characterized by non-linear currents and directional current rectification, and we show the rectified direction of the source-drain voltage can be controlled by using gate voltages. A systematic study of the pn junction characteristics allows to extract a gate-dependent bandgap value which ranges from 0 …
Recently rediscovered black phosphorus is a layered semiconductor with promising electronic and photonic properties. Dynamic control of its bandgap can enable novel device applications and allow for the exploration of new physical phenomena. However, theoretical investigations and photoemission spectroscopy experiments performed on doped black phosphorus through potassium adsorption indicate that in its few-layer form, an exceedingly large electric field in the order of several volts per nanometer is required to effectively tune its bandgap, making the direct electrical control unfeasible. Her…
The tight-binding model of bilayer graphene is used to find the gap between the conduction and valence bands, as a function of both the gate voltage and as the doping by donors or acceptors. The total Hartree energy is minimized and the equation for the gap is obtained. This equation for the ratio of the gap to the chemical potential is determined only by the screening constant. Thus the gap is strictly proportional to the gate voltage or the carrier concentration in the absence of donors or acceptors. In the opposite case, where the donors or acceptors are present, the gap demonstrates the as…
Could a laser field lead to the much sought-after tunable bandgaps in graphene? By using Floquet theory combined with Green's functions techniques, we predict that a laser field in the mid-infrared range can produce observable bandgaps in the electronic structure of graphene. Furthermore, we show how they can be tuned by using the laser polarization. Our results could serve as a guidance to design opto-electronic nano-devices.
We present a tunable phononic crystal which undergoes a phase transition from mechanically insulating to mechanically transmissive (metallic). Specifically, in our simulations for a phononic lattice under biaxial tension ($σ_{xx} =σ_{yy}$ = 0.01 N$/$m), we find a bandgap for out-of-plane phonons in the range of 48.8 - 56.4 MHz, which we can close by increasing the degree of tension uniaxiality ($σ_{xx} / σ_{yy}$) to 1.7. To manipulate the tension distribution, we design a realistic device of finite size, where $σ_{xx} / σ_{yy}$ is tuned by applying a gate voltage to a phononic crystal made fro…
Two-dimensional (2D) materials are composed of atomically thin crystals with an enormous surface-to-volume ratio, and their physical properties can be easily subjected to the change of the chemical environment. Encapsulation with other layered materials, such as hexagonal boron nitride, is a common practice; however, this approach often requires inextricable fabrication processes. Alternatively, it is intriguing to explore methods to control transport properties in the circumstance of no encapsulated layer. This is very challenging because of the ubiquitous presence of adsorbents, which can le…
Strain engineering has proven to be vital for germanium-based photonics, in particular light emission. However, applying a large permanent biaxial strain to germanium has been a challenge. We present a simple, CMOS-compatible technique to conveniently induce a large, spatially homogenous strain in microdisks patterned within ultrathin germanium nanomembranes. Our technique works by concentrating and amplifying a pre-existing small strain into the microdisk region. Biaxial strains as large as 1.11% are observed by Raman spectroscopy and are further confirmed by photoluminescence measurements, w…
Due to the strong quantum confinement effect, few-layer γ-InSe exhibits a layer-dependent bandgap, spanning the visible and near infrared regions, and thus recently draws tremendous attention. As a two-dimensional material, the mechanical flexibility provides an additional tuning knob for the electronic structure. Here, for the first time, we engineer the band structures of few-layer and bulk-like InSe by uniaxial tensile strain, and observe salient shift of photoluminescence (PL) peaks. The shift rate of the optical gap is approximately 90-100 meV per 1% strain for 4- to 8-layer samples, whic…
Graphene nanoribbons (GNRs) synthesized using a bottom-up technique potentially enable future electronic devices owing to the tunable electronic structures depending on the well-defined width and edge geometry. For instance, armchair-edged GNRs (AGNRs) exhibit width-dependent bandgaps. However, the bandgaps of AGNRs synthesized experimentally thus far are relatively large, well above 1 eV. Such a large bandgap may deteriorate device performances due to large Schottky barriers and carrier effective masses. We describe the bottom-up synthesis of AGNRs with a smaller bandgap using dibromobenzene-…
InSe, a member of the layered materials family, is a superior electronic and optical material which retains a direct bandgap feature from the bulk to atomically thin few-layers and high electronic mobility down to a single layer limit. We, for the first time, exploit strain to drastically modify the bandgap of two-dimensional (2D) InSe nanoflakes. We demonstrated that we could decrease the bandgap of a few-layer InSe flake by 160 meV through applying an in-plane uniaxial tensile strain to 1.06% and increase the bandgap by 79 meV through applying an in-plane uniaxial compressive strain to 0.62%…
Owing to the interaction between the layers, the twisted bilayer two-dimensional materials exhibit numerous unique optical and electronic properties different from the monolayer counterpart, and have attracted tremendous interests in current physical research community. By means of first-principles and tight-binding model calculations, the electronic properties of twisted bilayer biphenylene carbon are systematically investigated in this paper. The results indicate that the effect of twist will not only leads to a phase transition from semiconductor to metal, but also an adjustable band gap in…
Monolayer transition metal dichalcogenides (TMDs) possess superior optical properties, including the valley degree of freedom that can be accessed through the excitation light of certain helicity. While WS2 and WSe2 are known for their excellent valley polarization due to the strong spin-orbit coupling, the optical bandgap is limited by the ability to choose from only these two materials. This limitation can be overcome through the monolayer alloy semiconductor, WS2xSe2(1-x), which promises an atomically thin semiconductor with tunable bandgap. In this work, we show that the high-quality BN en…
In the field of phononics, periodic patterning controls vibrations and thereby the flow of heat and sound in matter. Bandgaps arising in such phononic crystals realize low-dissipation vibrational modes and enable applications towards mechanical qubits, efficient waveguides, and state-of-the-art sensing. Here, we combine phononics and two-dimensional materials and explore the possibility of manipulating phononic crystals via applied mechanical pressure. To this end, we fabricate the thinnest possible phononic crystal from monolayer graphene and simulate its vibrational properties. We find a ban…
We discuss the physics of the tunable bandgap in bilayer graphene with the gate voltage and doping. A comparison with experimental data obtained by Kuzmenko et al [Phys. Rev. B \textbf{80}, 165406 (2009)] demonstrates the good agreement.
Search of novel two-dimensional giant Rashba semiconductors is a crucial step in the development of the forthcoming nano-spintronics technology. Using first-principle calculations, we study a stable two-dimensional crystal phase of BiSb having buckled honeycomb lattice geometry, which is yet unexplored. The phonon, room temperature molecular dynamics and elastic constant calculations verify the dynamical and mechanical stability of the monolayer at 0~K and at room temperature. The calculated electronic bandstructure reveals the direct bandgap semiconducting nature of BiSb monolayer with presen…
Over the past few years, there has been a growing interest in layered transition metal dichalcogenides (TMD) such as molybdenum disulfide (MoS2). Most studies so far have focused on the electronic and optoelectronic properties of single-layer MoS2, whose band structure features a direct bandgap, in sharp contrast to the indirect bandgap of thicker MoS2. In this paper, we present a systematic study of the thickness-dependent electrical and thermoelectric properties of few-layer MoS2. We observe that the electrical conductivity () increases as we reduce the thickness of MoS2 and peaks at about t…
Second order optical nonlinear processes involve the coherent mixing of two electromagnetic waves to generate a new optical frequency, which plays a central role in a variety of applications, such as ultrafast laser systems, rectifiers, modulators, and optical imaging. However, progress is limited in the mid-infrared (MIR) region due to the lack of suitable nonlinear materials. It is desirable to develop a robust system with a strong, electrically tunable second order optical nonlinearity. Here we demonstrate theoretically that AB-stacked bilayer graphene (BLG) can exhibit a giant and tunable …
Bandgap control is of central importance for semiconductor technologies. The traditional means of control is to dope the lattice chemically, electrically or optically with charge carriers. Here, we demonstrate for the first time a widely tunable bandgap (renormalisation up to 650 meV at room-temperature) in two-dimensional (2D) semiconductors by coherently doping the lattice with plasmonic hot electrons. In particular, we integrate tungsten-disulfide (WS$_2$) monolayers into a self-assembled plasmonic crystal, which enables coherent coupling between semiconductor excitons and plasmon resonance…
Two-dimensional (2D) van-der-Waals semiconductors have emerged as a class of materials with promising device characteristics owing to the intrinsic bandgap. For realistic applications, the ideal is to modify the bandgap in a controlled manner by a mechanism that can be generally applied to this class of materials. Here, we report the observation of a universally tunable bandgap in the family of bulk 2H transition metal dichalcogenides (TMDs) by in situ surface doping of Rb atoms. A series of angle-resolved photoemission spectra unexceptionally shows that the bandgap of TMDs at the zone corners…
Successful synthesis of the nitrogenated holey two-dimensional structures C2N (Nat. Commun. 2015, 6, 1-7) using simply wet-chemical reaction offer a cost-effective way to generate other 2D materials with novel optical and electronic properties. Using the few-layer C2N as models, we have performed an ab initio study of electronic properties of layered C2N. Band gaps of this system exhibit monotone decreasing as the number of layers increase. And a direct-gap to indirect-gap transition at the bulk C2N. Besides, when we apply an out-of-plane electric field on few-layer C2N, the band gap of multil…
The shortcomings of mono-component systems, e.g., the gapless nature of graphene, the lack of air-stability in phosphorene, etc. have drawn great attention toward stacked materials expected to show interesting electronic and optical properties. Using the tight-binding approach and the Green's function method, we investigate the electronic properties of armchair-edged lateral phosphorene/graphene heterostructures, which are either semiconductor/semiconductor or semiconductor/metal heterostructures, depending on the width of graphene ribbon. It is found that the system is narrow-gapped, and the …
Manipulation of spin-polarized electronic states of two-dimensional (2D) materials under ambient conditions is necessary for developing new quantum devices with small physical dimensions. Here, we explore spin-dependent electronic structures of ultra-thin films of recently introduced 2D synthetic materials MSi$_2$Z$_4$ (M = Mo or W and Z = N or As) using first-principles modeling. Stacking of MSi$_2$Z$_4$ monolayers is found to generate dynamically stable bilayer and bulk materials with thickness-dependent properties. When spin-orbit coupling (SOC) is included in the computations, MSi$_2$N$_4$…
Few-layer Tellurium, an elementary semiconductor, succeeds most of striking physical properties that black phosphorus (BP) offers and could be feasibly synthesized by simple solution-based methods. It is comprised of non-covalently bound parallel Te chains, among which covalent-like feature appears. This feature is, we believe, another demonstration of the previously found covalent-like quasi-bonding (CLQB) where wavefunction hybridization does occur. The strength of this inter-chain CLQB is comparable with that of intra-chain covalent bonding, leading to closed stability of several Te allotro…
Optoelectronic functionalities of photodection and light harnessing rely on the band-to-band excitation of semiconductors, thus the spectral response of the devices is dictated and limited by their bandgap. A novel approach, free from this restriction, is to harvest the energetic electrons generated by the relaxation of a plasmonic resonance in the vicinity of a metal-semiconductor junction. In this configuration, the optoelectronic and spectral response of the detectors can be designed ad hoc just by tailoring the topology of metal structures, which has tremendous applications in solar energy…
Moiré excitons are emergent optical excitations in 2D semiconductors with deep moiré superlattice potentials. While these excitations have been realized in several platforms, a system with dynamically tunable moiré potential to tailor the moiré exciton properties is yet to be realized. Here, we present a continuously tunable moiré potential in a monolayer WSe2 that is enabled by its proximity to twisted bilayer graphene (TBG) near the magic-angle. Due to its flat electronic bands, charge distribution is highly localized and forms a triangular lattice in TBG. Tuning the local charge density via…
We demonstrate tunable solid state and flexible graphene field effect devices (FEDs) fabricated using a poly(methylmethacrylate) (PMMA) and lithium fluoride (LiF) composite dielectric. Increasing the concentration of LiF in the composite dielectric reduces the operating gate voltages significantly from 10 V to 1 V required leading to a decrease in resistance. Electron and hole mobility of 350 and 310 cm2/Vs at VD = -5 V are obtained for graphene FEDs with 10 % LiF concentration in the composite. Using composite dielectric also enabled excellent performance on flexible substrates without any si…
Carrier multiplication is a many-particle process giving rise to the generation of multiple electron-hole pairs. This process holds the potential to increase the power conversion efficiency of photovoltaic devices. In graphene, carrier multiplication has been theoretically predicted and recently experimentally observed. However, due to the absence of a bandgap and competing phonon-induced electron-hole recombination, the extraction of charge carriers remains a substantial challenge. Here we present a new strategy to benefit from the gained charge carriers by introducing a Landau quantization t…
Interlayer coupling is of vital importance for manipulating physical properties, e.g. electronic bandgap, in two-dimensional materials. However, tuning magnetic proper-ties in these materials is yet to be addressed. Here, we found a striped antiferromag-netic (sAFM) to ferromagnetic (FM) transition undergoing from monolayer to bilayer and thicker CrS2. This transition is attributed to charge sharing of interlayer S atoms and its resulting charge transfer from Cr d eg to t2g orbitals. The transferred charge reduces a portion of Cr4+ to Cr3+, which enhances the double-exchange mechanism favoring…
Dirac-electronic tunneling and nonlinear transport properties with both finite and zero energy bandgap are investigated for graphene with a tilted potential barrier under a bias. For validation, results from a finite-difference based numerical approach, which is developed for calculating transmission and reflection coefficients with a dynamically-tunable (time-dependent bias field) barrier-potential profile, are compared with those of both an analytical model for a static square-potential barrier and a perturbation theory using Wentzel-Kramers-Brillouin (WKB) approximation. For a biased barrie…
Two-dimensional hole gases in semiconductor quantum wells are promising platforms for spintronics and quantum computation but suffer from the lack of the $\bf{k}$-linear term in the Rashba spin-orbit coupling (SOC), which is essential for spin manipulations without magnetism and commonly believed to be a $\bf{k}$-cubic term as the lowest order. Here, contrary to conventional wisdom, we uncover a strong and tunable $\bf{k}$-linear Rashba SOC in two-dimensional hole gases (2DHG) of semiconductor quantum wells by performing atomistic pseudopotential calculations combined with an effective Hamilto…
