Triple points and nexus points are two interesting topological phases, which have been reported in some three-dimensional (3D) materials. Here, we propose that triple points, nexus points and related phases, such as topological tangle nodal lines, can be obtained by alternatively stacking two types of monolayers. Two conditions for the stacking monolayers are required: the first condition is that they have a three-fold (C3) rotation symmetry and three mirror planes along the C3 axis; the second condition is that one of the monolayers should be insulating while the other one should be metallic (or semiconducting) and has a double degenerate band and a nondegenerate band at Γpoint around the Fermi level. Hexagonal boron nitride (HBN) and α/α^'-boron sheets (α/α^'-BS) are suggested as candidate materials. Even if HBN is a wide-gap insulator, the interactions between layers lead to crossings of the nondegenerate and double degenerate bands along the direction normal to the nanosheets, and thus form triple/nexus points or related phases. A tight-binding model is adopted to explain the phase transition between triple points, nexus points and other related phases.
Anomalous valley Hall (AVH) effect is a fundamental transport phenomenon in the field of condensed-matter physics. Usually, the research on AVH effect is mainly focused on 2D lattices with ferromagnetic order. Here, by means of model analysis, we present a general design principle for realizing AVH effect in antiferromagnetic monolayers, which involves the introduction of nonequilibrium potentials to break of PT symmetry. Using first-principles calculations, we further demonstrate this design principle by stacking antiferromagnetic monolayer MnPSe3 on ferroelectric monolayer Sc2CO2 and achieve…
The Co$_2$Ge$_2$Te$_6$ shows intrinsic ferromagnetic (FM) order, which origins from superexchange interaction between Co and Te atoms, with higher Curie temperature ($T_c$) of 161 K. Co$_2$Ge$_2$Te$_6$ monolayer (ML) is half-metal (HM), and spin-$β$ electron is a semiconductor with gap of 1.311 eV. Co$_2$Ge$_2$Te$_6$ ML tends in-plane anisotropy (IPA), with magnetic anisotropy energy (MAE) of -10.2 meV/f.u.. Co$_2$Ge$_2$Te$_6$ ML shows good dynamical and thermal stability. Most interestingly, bilayers present ferromagnetic half-metallicity independent of the stacking orders. Notley, the multil…
Stacking up electron-rich and electron-deficient monolayers to achieve extraordinary mid- to far-infrared excitonic absorption: Interlayer excitons in the C3B/C3N bilayer
Two-dimensional van der Waals crystals arise limitless scope for designing novel combinations of physical properties via controlling the stacking order or twist angle of individual layers. Lattice orientation between stacked monolayers is significant not only for the engineering symmetry breaking but also for the study of many-body quantum phases and band topology. So far the state-of-art exfoliation approaches focusing on achievements of quality, size, yield, and scalability while lacking sufficient information on lattice orientation. Consequently, interlayer alignment is usually determined b…
Excitons in monolayer semiconductors have large optical transition dipole for strong coupling with light field. Interlayer excitons in heterobilayers, with layer separation of electron and hole components, feature large electric dipole that enables strong coupling with electric field and exciton-exciton interaction, at the cost that the optical dipole is substantially quenched (by several orders of magnitude). In this letter, we demonstrate the ability to create a new class of excitons in transition metal dichalcogenide (TMD) hetero- and homo-bilayers that combines the advantages of monolayer-…
Multiple magnetic states, valley electronics, and topological phase transitions in two-dimensional Janus XYZH (X = Sc, Y, La, Y = Cl, Br, I, and Z = S, Se, Te): From monolayers to bilayers
Based on first-principles calculations, we predict that the monolayer AuTe2Cl is a quantum spin Hall (QSH) insulator with a topological band gap about 10 meV. The three-dimensional (3D) AuTe2Cl is a topological semimetal that can be viewed as the monolayer stacking along b axis. By studying the energy level distribution of p orbitals of Te atoms for the bulk and the monolayer, we find that the confinement effect driven p_y^- and p_z^+ band inversion is responsible for the topological nontrivial nature of monolayer. Since 3D bulk AuTe2Cl has already been experimentally synthesized, we expect th…
Motivated by the recently synthesized two-dimensional semiconducting MoSi$_2$N$_4$, we systematically investigate the quasiparticle band alignment and exciton in monolayer MA$_2$Z$_4$ (M = Mo, W, Ti; A= Si, Ge; Z = N, P, As) using ab initio GW and Bethe-Salpeter equation calculations. Compared with the results from density functional theory (DFT), our GW calculations reveal substantially more significant band gaps and different absolute quasiparticle energy but predict the same types of band alignments.
Generally, stacking two quantum spin Hall insulators gives rise to a trivial insulator. Here, based on first-principles electronic structure calculations, we confirm that monolayer TaIrTe$_{4}$ is a quantum spin Hall insulator and remarkably find that bilayer TaIrTe$_{4}$ is still a quantum spin Hall insulator. Theoretical analysis indicates that the covalent-like interlayer interaction in combination with the small bandgap at time-reversal invariant $Γ$ point results in new band inversion in bilayer TaIrTe$_{4}$, namely, the emergence of quantum spin Hall phase. Meanwhile, a topological phase…
Light emission in atomically thin heterostructures is known to depend on the type of materials, number and stacking sequence of the constituent layers. Here we show that the thickness of a two-dimensional substrate can be crucial in modulating the light emission. We study the layer-dependent charge transfer in vertical heterostructures built from monolayer tungsten disulphide (WS2) on one- and two-layer epitaxial graphene, unravelling the effect that the interlayer electronic coupling has on the excitonic properties of such heterostructures. We bring evidence that the excitonic properties of W…
Based on extensive evolutionary algorithm driven structural search, we propose a new diphosphorus trisulfide (P2S3) 2D crystal, which is dynamically, thermally and chemically stable as confirmed by the computed phonon spectrum and ab initio molecular dynamics simulations. This 2D crystalline phase of P2S3 corresponds to the global minimum in the Born-Oppenheimer surface of the phosphorus sulfide monolayers with 2:3 stoichiometries. It is a wide band gap (4.55 eV) semiconductor with P-S σ bonds. The electronic properties of P2S3 structure can be modulated by stacking into multilayer P2S3 struct…
Novel materials with nontrivial electronic and photonic band topology are crucial for realizing novel devices with low power consumption and heat dissipation, and quantum computing free of decoherence. Here using first-principles approach, we predict a class of ternary transition metal chalcogenides (TTMC) MM'Te$_4$ exhibits dual topological characteristics: quantum spin Hall (QSH) insulators in their 2D monolayers and topological Weyl semimetals in their 3D noncentrosymmetric crystals upon van der Waals (vdW) stacking. Remarkably, we find that one can create and annihilate Weyl fermions, and …
Recently, orbital-textures have been found in Rashba and topological insulator (TI) surface states as a result of the spin-orbit coupling (SOC). Here, we predict a $p_x/p_y$ orbital texture, in linear dispersive Dirac bands, arising at the K/K' points of $χ$-$h_0$ borophene chiral monolayer. Combining first-principles calculations with effective hamiltonians, we show that the orbital pseudospin has its direction locked with the momentum in a similar way as TIs' spin-textures. Additionally, considering a layer pseudospin degree of freedom, this lattice allows stackings of layers with equivalent…
From monolayers composed of different atoms, we can build structures with spontaneous vertical polarization by conveniently stacking multiple layers. We have studied, using first-principles methods and based on modern polarization theory, a system composed of three layers of hexagonal Boron-Nitride(h-BN) in all possible stackings. We obtain for each of the configurations how charge transfers between the layers and how it impacts on the polarization of the system. In addition, we studied a system of three layers, one of them rotated, and we found that not only did the magnitude of the polarizat…
Combining MoS$_2$ monolayers to form multilayers allows to access new functionalities. In this work, we examine the correlation between the stacking order and the interlayer coupling of valence states in MoS$_2$ homobilayer samples grown by chemical vapor deposition (CVD) and artificially stacked bilayers from CVD monolayers. We show that hole delocalization over the bilayer is allowed in 2H stacking and results in strong interlayer exciton absorption and also in a larger A-B exciton separation as compared to 3R bilayers, where both holes and electrons are confined to the individual layers. Co…
Bimetal transition iodides in two-dimensional scale provide an interesting idea to combine a set of single-transition-metal ferromagnetic semiconductors together. Motivated by structural engineering on bilayer CrI$_3$ to tune its magnetism and works that realize ideal properties by stacking van der Waals transitional metal dichalcogenides in a certain order. Here we stack monolayer VI$_3$ onto monolayer CrI$_3$ with a middle-layer I atoms discarded to construct monolayer V$_2$Cr$_2$I$_9$. Based on this crystal model, the stable and metastable phases are determined among 7 possible phases by fi…
High-level first-principles computations predict blue phosphorene bilayer to be a two-dimensional metal. This structure has not been considered before and was identified by employing a block-diagram scheme that yields the complete set of five high-symmetry stacking configurations of buckled honeycomb layers, and allows their unambiguous classification. We show that all of these stacking configurations are stable or at least metastable configurations both for blue phosphorene and gray arsenene bilayers. For blue phosphorene, the most stable stacking configuration has not yet been reported, and …
Using density functional theory with added on-site interactions (DFT+U), we study the electronic structure of bulk, monolayer, and bilayer of the layered transition-metal dichalcogenide $1T-TaS_2$. We show that a two-dimensional spin--$\frac{1}{2}$ Mott-phase exists for the monolayer in the charge-density wave state (CDW) and that such a phase is systematically destroyed by packing of the distorted layers leading to a one dimensional metal for bulk, CDW-distorted TaS$_2$. The latter finding is in contrast with previous DMFT predictions --disagreement we explain by the weak effective interactio…
We investigate the layer localization control of two-dimensional states in multilayer metal-organic frameworks (MOFs). For finite stackings of (NiC4S4)3 MOFs, the weak van der Waals coupling between adjacent layers leads to a Fermi level dependent distribution of the electronic states in the monolayers. Such distribution is reflected in the topological edge states of multilayer nanoribbons. Moreover, by applying an external electric field, parallel to the stacking direction, the spacial localization of the electronic states can be controlled for a chosen Fermi energy. This localization behavio…
The Rashba effect is fundamental to the physics of two-dimensional electron systems and underlies a variety of spintronic phenomena. It has been proposed that the formation of Rashba-type spin splittings originates microscopically from the existence of orbital angular momentum (OAM) in the Bloch wave functions. Here, we present detailed experimental evidence for this OAM-based origin of the Rashba effect by angle-resolved photoemission (ARPES) and two-photon photoemission (2PPE) experiments for a monolayer AgTe on Ag(111). Using quantitative low-energy electron diffraction (LEED) analysis we d…
Two-dimensional transition metal dichalcogenides (TMDC) have shown promise for various applications in optoelectronics and so-called valleytronics. Their operation and performance strongly depend on the stacking of individual layers. Here, optical second-harmonic generation (SHG) in imaging mode is shown to be a versatile tool for systematic time-resolved investigations of TMDC monolayers and heterostructures in consideration of the material's structure. Large sample areas can be probed without the need of any mapping or scanning. By means of polarization dependent measurements, the crystallin…
Tin monoxide is an interesting two-dimensional material because of the rare oxide semiconductor with bipolar conductivity. However, the lower room temperature mobility limits the applications of SnO in the future. Thus, we systematically investigate the effects of the different layer structures and strains on the electron-phonon coupling and phonon-limited mobility of SnO. The A2u phonon mode in the high frequency region is the main contributor coupling with electron for the different layer structures. And the orbital hybridization of Sn atoms existing only in bilayer structure changes the con…
Twisted van der Waals heterostructures with flat electronic bands have recently emerged as a platform for realizing correlated and topological states with an extraordinary degree of control and tunability. In graphene-based moiré heterostructures, the correlated phase diagram and band topology depend strongly on the number of graphene layers, their relative stacking arrangement, and details of the external environment from the encapsulating crystals. Here, we report that the system of twisted monolayer-bilayer graphene (tMBG) hosts a variety of correlated metallic and insulating states, as wel…
Following the recent isolation of monolayer CrI3, there has been a surge of new two-dimensional van der Waals magnetic materials, whose incorporation in van der Waals heterostructures offers a new platform for spintronics, proximity magnetism, and quantum spin liquids. A primary question in this burgeoning field is how exfoliating crystals to the few-layer limit influences their magnetism. Studies on CrI3 have shown a different magnetic ground state for ultrathin exfoliated films but the origin is not yet understood. Here, we use electron tunneling through few-layer crystals of the layered ant…
Based on first-principles calculations and effective model analysis, a Dirac nodal-net semimetal state is recognized in AlB$_2$-type TiB$_2$ and ZrB$_2$ when spin-orbit coupling (SOC) is ignored. Taking TiB$_2$ as an example, there are several topological excitations in this nodal-net structure including triple point, nexus, and nodal link, which are protected by coexistence of spatial-inversion symmetry and time reversal symmetry. This nodal-net state is remarkably different from that of IrF$_4$, which requires sublattice chiral symmetry. In addition, linearly and quadratically dispersed two-…
Tunnel field effect transistors (TFETs) based on vertical stacking of two dimensional materials are of interest for low-power logic devices. The monolayer transition metal dichalcogenides (TMDs) with sizable band gaps show promise in building p-n junctions (couples) for TFET applications. Band alignment information is essential for realizing broken gap junctions with excellent electron tunneling efficiencies. Promising couples composed of monolayer TMDs are suggested to be VIB-MeX2 (Me= W, Mo; X= Te, Se) as the n-type source and IVB-MeX2 (Me = Zr, Hf; X= S, Se) as the p-type drain by density f…
Two-dimensional materials offer a versatile platform to study high-harmonic generation (HHG), encompassing as limiting cases bulk-like and atomic-like harmonic generation [Tancogne-Dejean and Rubio, Science Advance \textbf{4}, eaao5207 (2018)]. Understanding the high-harmonic response of few-layer semiconducting systems is important, and might open up possible technological applications. Using extensive first-principle calculations within a time-dependent density functional theory framework, we show how the in-plane and out-of-plane nonlinear non-perturbative response of two-dimensional materi…
In our previous study, we have predicted the novel two-dimensional honeycomb monolayers of pnictogen. In particular, the structure and properties of the honeycomb monolayer of nitrogen, which we call nitrogene, are very unusual. In this paper, we make an in-depth investigation of its electronic structure. We find that the band structure of nitrogene can be engineered in several ways: controlling the stacking of monolayers, application of biaxial tensile strain, and application of perpendicular electric field. The band gap of nitrogene is found to decrease with the increasing number of layers. …
The crystallographic symmetries and spatial distribution of stacking domains in graphene films on SiC have been studied by low energy electron diffraction (LEED) and dark field imaging in a low energy electron microscope (LEEM). We find that the graphene diffraction spots from 2 and 3 atomic layers of graphene have 3-fold symmetry consistent with AB (Bernal) stacking of the layers. On the contrary, graphene diffraction spots from the buffer layer and monolayer graphene have apparent 6-fold symmetry, although the 3-fold nature of the satellite spots indicates a more complex periodicity in the g…
Xenes, graphene-like two-dimensional (2D) monoelemental crystals with a honeycomb symmetry, have been the focus of numerous experimental and theoretical studies. In comparison, single-element 2D materials with a triangular lattice symmetry have not received due attention. Here, taking Pb as an example, we investigate the triangular-lattice monolayer made of group-IV atoms employing first-principles density functional theory calculations. The flat Pb monolayer supports a mirror-symmetry-protected spinless nodal line in the absence spin-orbit coupling (SOC). The introduction of an out-of-plane b…
