This paper aims to investigate the curvature restricted geometric properties admitted by Melvin magnetic spacetime metric, a warped product metric with $1$-dimensional fibre. For this, we have considered a Melvin type static, cylindrically symmetric spacetime metric in Weyl form and it is found that such metric, in general, is generalized Roter type, $Ein(3)$ and has pseudosymmetric Weyl conformal tensor satisfying the pseudosymmetric type condition $R\cdot R-Q(S,R)=\mathcal L' Q(g,C)$. The condition for which it satisfies the Roter type condition has been obtained. It is interesting to note that Melvin magnetic metric is pseudosymmetric and pseudosymmetric due to conformal tensor. Moreover such metric is $2$-quasi-Einstien, its Ricci tensor is Reimann compatible and Weyl conformal $2$-forms are recurrent. The Maxwell tensor is also pseudosymmetric type.
In this paper, we study the Randers metrics of weakly isotropic scalar curvature. We prove that a Randers metric of weakly isotropic scalar curvature must be of isotropic $S$-curvature. Further, we prove that a conformally flat Randers metric of weakly isotropic scalar curvature is either Minkowskian or Riemannian.
Spherically symmetric metrics form a rich and important class of metrics. Many well-known Finsler metrics of constant flag curvature can be locally expressed as a spherically symmetric metric on R^n. In this paper, we study spherically symmetric metrics with constant Ricci curvature and constant flag curvature.
Extending Aubin's construction of metrics with constant negative scalar curvature, we prove that every $n$-dimensional closed manifold admits a Riemannian metric with constant negative scalar-Weyl curvature, that is $R+t|W|, t\in\mathbb{R}$. In particular, there are no topological obstructions for metrics with $\varepsilon$-pinched Weyl curvature and negative scalar curvature.
We show that two smooth nearby Riemannian metrics can be glued interpolating their scalar curvature. The resulting smooth metric is the same as the starting ones outside the gluing region and has scalar curvature interpolating between the original ones. One can then glue metrics while maintaining inequalities satisfied by the scalar curvature. We also glue asymptotically Euclidean metrics to Schwarzschild ones and the same for asymptotically Delaunay metrics, keeping bounds on the scalar curvature, if any. This extend the Corvino gluing near infinity to non-constant scalar curvature metrics.
We classify homogeneous reversible Finsler metrics with positive Flag curvature. We show that if G/H admits a G invariant reversible Finsler metric with positive Flag curvature, then up to a few low dimensional spaces, it also admits a G invariant Riemannian metric with positive sectional curvature. For the exceptions, we do not know if they admit homogeneous Finsler metrics with positive Flag curvature.
We study closed $n$-dimensional manifolds of which the metrics are critical for quadratic curvature functionals involving the Ricci curvature, the scalar curvature and the Riemannian curvature tensor on the space of Riemannian metrics with unit volume. Under some additional integral conditions, we classify such manifolds. Moreover, under some curvature conditions, the result that a critical metric must be Einstein is proved.
If the flag curvature of a Finsler manifold reduces to sectional curvature, then locally either the Finsler metric is Riemannian, or the flag curvature is isotropic.
In this Note, we prove that every m-th root Finsler metric with isotropic Landsberg curvature reduces to a Landsberg metric. Then, we show that every m-th root metric with almost vanishing H-curvature has vanishing H-curvature.
In this paper we study warped product Finsler metrics and show that the notion of isotropic $E$-curvature and isotropic $S$-curvature are equivalent for this class of metrics.
We study rigidity results for the Einstein metrics as the critical points of a family of known quadratic curvature functionals involving the scalar curvature, the Ricci curvature and the Riemannian curvature tensor, characterized by some pointwise inequalities involving the Weyl curvature and the traceless Ricci curvature. Moreover, we also provide a few rigidity results for locally conformally flat critical metrics.
We define a Weyl-type curvature tensor of $(1,2)$-type to provide a characterization for Finsler metrics of constant flag curvature. This Weyl-type curvature tensor is projective invariant only to projective factors that are Hamel functions. Based on this aspect we construct new families of projectively related Finsler metrics that have constant flag curvature.
The study of curvature properties of homogeneous Finsler spaces with $(α, β)$-metrics is one of the central problems in Riemann-Finsler geometry. In this paper, we consider homogeneous Finsler spaces with square metric and Randers change of square metric. First, we derive the explicit formulae for Ricci curvature of homogeneous Finsler spaces with these metrics. Next, we find a necessary and sufficient condition under which a homogeneous Finsler space with either of these metrics is of vanishing $S$-curvature. The formulae for Ricci curvature of homogeneous Finsler spaces with square metric an…
The study of curvature properties of homogeneous Finsler spaces with $(α, β)$-metrics is one of the central problems in Riemann-Finsler geometry. In the present paper, the existence of invariant vector fields on homogeneous Finsler spaces with square $(α, β)$-metric and Randers changed square $(α, β)$-metric is proved. Further, an explicit formula for $S$-curvature of these $(α, β)$-metrics is established. Finally, using the formula of $S$-curvature, the mean Berwald curvature of afore said $(α, β)$-metrics is calculated.
One of the most important problems in Finsler geometry is to classify Finsler metrics of scalar flag curvature. In this paper, we study the classification problem of Randers metrics of scalar flag curvature. Under the condition that $β$ is a Killing 1-form, we obtain some important necessary conditions for Randers metrics to be of scalar flag curvature.
In this paper, we study a class of Finsler metrics called general $(α,β)$-metrics, which are defined by a Riemannian metric $α$ and a $1$-form $β$. We classify this class of Finsler metrics with isotropic Berwald curvature under certain condition.
We study curvature identities on contact metric manifolds on the geometry of the corresponding almost Käehler cones, and we provide applications of the derived curvature identities.
An $(α,β)$-metric is defined by a Riemannian metric $α$ and $1$-form $β$. In this paper, we study a known class of two-dimensional $(α,β)$-metrics of vanishing S-curvature. We determine the local structure of those metrics and show that those metrics are Einsteinian (equivalently, isotropic flag curvature) but generally are not Ricci-flat.
In this paper, we investigate the spherically symmetric Finsler metrics with isotropic S-curvature and obtain a characterized equation. As an application, we prove that these metrics with Douglas type must be Randers metrics or Berwald metrics. This result leads to two classification theorems.
We investigate projective spherically symmetric Finsler metrics with constant flag curvature in $R^n$ and give the complete classification theorems. Furthermore, a new class of Finsler metrics with two parameters on n-dimensional disk are found to have constant negative flag curvature.
We determine the curvature equations of natural metrics on tangent bundles and radius r tangent sphere bundles S_rM of a Riemannian manifold M. A family of positive scalar curvature metrics on S_rM is found, for any M with bounded sectional curvature and any chosen constant r.
Using a method introduced by R. Bamler to study the behavior of scalar curvature under continuous deformations of Riemannian metrics, we prove that if a sequence of smooth Riemannian metrics gi on a fixed compact manifold M has isotropic curvature bounded from below by a nonnegative function u, and if gi converge in C 0 norm to a smooth metric g, then g has isotropic curvature bounded from below by u. The proof also works for various other bounds from below on the curvature, such has non-negative curvature operator.
Square metrics is an important class of Finsler metrics. Recently, we introduced a special class of non-regular Finsler metrics called singular square metrics. The main purpose of this paper is to provide a necessary and sufficient condition for singular square metrics to be of constant Ricci or flag curvature when dimension $n\geq3$.
We construct metrics of positive Ricci curvature on some vector bundles over tori (or more generally, over nilmanifolds). This gives rise to the first examples of manifolds with positive Ricci curvature which are homotopy equivalent but not homeomorphic to manifolds of nonnegative sectional curvature.
We prove a formula involving the scalar curvature of a Riemannian manifold endowed with a distribution in terms of an adapted orthonormal frame for its tangent bundle. Using the formula, we then investigate the effect of collapsing the metric along the distribution on the scalar curvature. This result contributes to the question of finding a positive scalar curvature metric on a Riemannian manifold.
In this paper we study the flag curvature of a particular class of Finsler metrics called general $(α,β)$-metrics, which are defined by a Riemannian metric $α$ and a $1$-form $β$. The classification of such metrics with constant flag curvature are completely determined under some suitable conditions, which make them be locally projectively flat. As a result, we construct some new projectively flat Finsler metrics with flag curvature $1$, $0$ and $-1$, all of which are of singularity at some directions.
We first provide an alternative proof of the classical Weitzneböck formula for Einstein four-manifolds using Berger curvature decomposition, motivated by which we establish a unified framework for a Weitzenböck formula for a large class of canonical metrics on four-manifolds (or a Weitzenböck formula for "Einstein metrics" on four-dimensional smooth metric measure spaces). As applications, we classify Einstein four-manifolds of half two-nonnegative curvature operator, which in some sense provides a characterization of Kähler-Einstein metrics with positive scalar curvature on four-manifolds, we…
In this work we illustrate some well-known facts about the evolution of $S^3$ under the Ricci flow. The Dirac flow we introduce allows us to describe the 4- dimensional metrics with constant curvature. Another new flow leads to the Eguchi-Hanson metric and can be defined either on metric or on corresponding contact forms.
In the present paper, the flag curvature of invariant Randers metrics on homogeneous spaces and Lie groups is studied. We first give an explicit formula for the flag curvature of invariant Randers metrics arising from invariant Riemannian metrics on homogeneous spaces and, in special case, Lie groups. We then study Randers metrics of constant positive flag curvature and complete underlying Riemannian metric on Lie groups. Finally we give some properties of those Lie groups which admit a left invariant non-Riemannian Randers metric of Berwald type arising from a left invariant Riemannian metric…
We prove that the tangent bundle endowed with a g-natural metrics has constant sectional curvature if and only if it is flat, and then we give a characterization of flat g-natural metrics on tangent bundles.
This paper contributes to the study of the Matsumoto metric F=alpha^2/beta, where the alpha is a Riemannian metric and the beta is a one form. It is shown that such a Matsumoto metric F is of scalar flag curvature if and only if F is projectively flat.
In the current paper, first we give the correct version of the formula for mean Berwald curvature of a spherically symmetric Finsler metric given in paper \cite{YCheWSon2015}. Further, we establish differential equations characterizing projectively as well as dually flat spherically symmetric Finsler metrics. Finally, we obtain a rigidity result on spherically symmetric Finsler metrics with isotropic $E$-Curvature.
As a generalization of the Schwarzschild solution, Vaidya presented a radiating metric to develop a model of the exterior of a star including its radiation field, called Vaidya metric. The present paper deals with the investigation on the curvature properties of Vaidya metric. It is shown that Vaidya metric can be considered as a model of different pseudosymmetric type curvature conditions, namely, $C\cdot C = \frac{m}{r^3} Q(g, C)$, $R\cdot R - Q(S,R) = \frac{m}{r^3} Q(g,C)$ etc. It is also shown that Vaidya metric is Ricci simple, vanishing scalar curvature and its Ricci tensor is Riemann-co…
In this article we review the recent results about the flag curvature of invariant Randers metrics on homogeneous manifolds and by using a counter example we show that the formula which obtained for the flag curvature of these metrics is incorrect. Then we give an explicit formula for the flag curvature of invariant Randers metrics on the naturally reductive homogeneous manifolds $(G/H,g)$, where the Randers metric induced by the invariant Riemannian metric $g$ and an invariant vector field $\tilde{X}$ which is parallel with $g$.
In this paper, we prove that the transverse Mabuchi K-energy functional is convex along the weak geodesic in the space of Sasakian metrics. As an application, we obtain the uniqueness of constant scalar curvature Sasakian metrics modulo automorphisms for the transverse holomorphic structure.
In this paper, we study normal complex contact metric manifolds and we get some general results on them. Moreover, we obtained the general expression of the curvature tensor field for arbitrary vector fields. Furthermore, we show that the necessary and succient conditions to be normal a complex contact metric manifold. Also, we give some new equailities for Ricci curvature of normal complex contact metric manifolds.
We apply Tian's method in Kahler-Einstein problem to prove that a conic K\''ahler metric with lower Ricci curvature bound can be approximated by smooth K\''ahler metrics with the same lower Ricci curvature bound. Furthermore, conic singularities here can be along a simple normal crossing divisor.
Singular Finsler metrics, such as Kropina metrics and $m$-Kropina metrics, have a lot of applications in the real world. In this paper, we classify a class of singular $(α,β)$-metrics which are locally projectively flat with constant flag curvature in dimension $n= 2$ and $n \ge 3$ respectively. Further, we determine the local structure of $m$-Kropina metrics and particularly Kropina metrics which are projectively flat with constant flag curvature and prove that such metrics must be locally Minkowskian but are not necessarily flat-parallel.
In [7], a notion of constant scalar curvature metrics on piecewise flat manifolds is defined. Such metrics are candidates for canonical metrics on discrete manifolds. In this paper, we define a class of vertex transitive metrics on certain triangulations of $\mathbb{S}^3$; namely, the boundary complexes of cyclic polytopes. We use combinatorial properties of cyclic polytopes to show that, for any number of vertices, these metrics have constant scalar curvature.
We show that the moduli space of Riemannian metrics of nonnegative sectional curvature on certain quotients of Brieskorn varieties in dimension 5 has infinitely many path components. The same is true for the corresponding moduli space of positive Ricci curvature.
Isotropic almost complex structures induce a class of Riemannian metrics on tangent bundle of a Riemannian manifold. In this paper the curvature tensors of these metrics will be calculated.
In this paper we prove the path connectedness of the moduli spaces of metrics with positive isotropic curvature on certain compact four-dimensional manifolds.
It is known that Hirzebruch surfaces of non zero degree do not admit any constant scalar curvature Kähler metric \cite{ACGT,G,M17}. In this note, we describe how to construct Hermitian metrics of positive constant Chern scalar curvature on Hirzebruch surfaces using Page--Bérard-Bergery's ansatz \cite{P78,B82}. We also construct the interesting case of Hermitian metrics of zero Chern scalar curvature on some ruled surfaces. Furthermore, we discuss the problem of the existence in a conformal class of critical metrics of the total Chern scalar curvature, studied by Gauduchon in \cite{G80,G84}.
In this paper, we consider a special class of singular Finsler metrics: $m$-Kropina metrics which are defined by a Riemannian metric and a $1$-form. We show that an $m$-Kropina metric ($m\ne -1$) of scalar flag curvature must be locally Minkowskian in dimension $n\ge 3$. We characterize by some PDEs a Kropina metric ($m=-1$) which is respectively of scalar flag curvature and locally projectively flat in dimension $n\ge 3$, and obtain some principles and approaches of constructing non-trivial examples of Kropina metrics of scalar flag curvature.
In this paper, we prove that every m-th root metric with isotropic mean Berwald curvature reduces to a weakly Berwald metric. Then we show that an m-th root metric with isotropic mean Landsberg curvature is a weakly Landsberg metric. We find necessary and sufficient condition under which conformal $β$-change of an m-th root metric be locally dually flat. Finally, we prove that the conformal $β$-change of locally projectively flat m-th root metrics are locally Minkowskian.
We prove that a simpy connected Hermitian Einstein 4-manifold with non-negative sectional curvature is isometric to complex projective space $\mathbb{C}\mathbb{P}^{2}$ with the Fubini-Study metric or isometric to the product $\mathbb{S}^{2}\times \mathbb{S}^{2}$ with the canonical metric.
In this paper, we introduce the weighted projective Ricci curvature as an extension of projective Ricci curvature introduced by Z. Shen. We characterize the class of Randers metrics of weighted projective Ricci flat curvature. We find the necessary and sufficient condition under which a Kropina metric has weighted projective Ricci flat curvature. Finally, we show that every projectively flat metric with isotropic weighted projective Ricci and isotropic S-curvature is a Kropina metric or Randers metric.
