The IceCube Neutrino Observatory is a cubic kilometer volume neutrino detector installed in the Antarctic at the geographic South Pole. Neutrinos are detected through the observation of Cherenkov light from charged relativistic particles generated in neutrino interactions, using an array of 86~strings of optical sensor modules. Currently an upgrade to the IceCube detector is in preparation. This IceCube Upgrade will add seven additional strings with new optical sensors and calibration devices. A new camera system is designed for this upgrade to be installed with the new optical modules. This camera system will study bulk ice properties and the refrozen ice in the drill hole. The system can also be utilized to provide information on the detector geometry including location and orientation of the optical modules and cables that can be used to calibrate IceCube Monte Carlo simulations. A better understanding of the refrozen ice in the drill hole including the complementary knowledge of the optical properties of the surrounding glacial ice will be obtained by surveying and analyzing the images from this system. The camera system consists of two types of components: an image sensor module and an illumination module. The image sensor module uses a CMOS image sensor to take pictures for the purpose of calibration studies. The illumination module emits static, monochromatic light into a given direction with a specific beam width and brightness during the image taking process. To evaluate the system design and demonstrate its functionality, a simulation study based on lab measurements is performed in parallel with the hardware development. This study allows for the development of the preliminary image analysis tool for the system. We present the prototype of the camera system and the results of the first system demonstrations.
An upgrade to the IceCube Neutrino Telescope is currently under construction. For this IceCube Upgrade, seven new strings will be deployed in the central region of the 86 string IceCube detector to enhance the capability to detect neutrinos in the GeV range. One of the main science objectives of the IceCube Upgrade is an improved calibration of the IceCube detector to reduce systematic uncertainties related to the optical properties of the ice. We have developed a novel optical camera and illumination system that will be part of 700 newly developed optical modules to be deployed with the IceCu…
The IceCube Neutrino Observatory, completed in December 2010 and located at the geographic South Pole, is the largest neutrino telescope in the world. IceCube includes the more densely instrumented DeepCore subarray, which increases IceCube's sensitivity at neutrino energies down to 10 GeV. DeepCore has recently demonstrated sensitivity to muon neutrino disappearance from atmospheric neutrino oscillation. A further extension is under consideration, the Precision IceCube Next Generation Upgrade (PINGU) which would lower the energy threshold below about 10 GeV. In particular, PINGU would be sens…
The IceCube Neutrino Observatory at the geographic South Pole has reached a number of milestones in the field of neutrino astrophysics. The achievements of IceCube include the discovery of a high-energy astrophysical neutrino flux, and the temporal and directional correlation of neutrinos with a flaring blazar. The IceCube Upgrade, which will be constructed in the 2022/23 Antarctic Summer season, is the next stage of the IceCube project. The IceCube Upgrade consists of seven new columns of photosensors, densely embedded near the bottom center of the existing cubic-kilometer-scale IceCube Neutr…
IceCube is a cubic-kilometer scale neutrino telescope located at the geographic South Pole. The detector utilizes the extremely transparent Antarctic ice as a medium for detecting Cherenkov radiation from neutrino interactions. While the optical properties of the glacial ice are generally well modeled and understood, the uncertainties which remain are still the dominant source of systematic uncertainties for many IceCube analyses. A camera and LED system is being built for the IceCube Upgrade that will enable the observation of optical properties throughout the Upgrade array. The SPICEcore hol…
The IceCube Upgrade is an extension of the IceCube detector at the geographic South Pole. It consists of seven new strings with novel instrumentation. More than 430 multi-PMT optical modules called "mDOMs", housing 24 3-inch PMTs each, will be produced for the Upgrade. This will require testing and pre-calibration on a short timescale of more than 10,000 PMTs prior to assembly and deployment. We present the design of a PMT testing facility that enables simultaneous testing of roughly 100 PMTs per day at temperatures down to -20°C. The design is implemented at RWTH Aachen University and TU Dort…
The IceCube Neutrino Observatory at the geographic South Pole instruments a gigaton of glacial Antarctic ice with over 5000 photosensors. The detector, by now running for over a decade, will be upgraded with seven new densely instrumented strings. The project focuses on the improvement of low-energy and oscillation physics sensitivities as well as re-calibration of the existing detector. Over the last few years we developed a Precision Optical Calibration Module (POCAM) providing self-monitored, isotropic, nanosecond, light pulses for optical calibration of large-volume detectors. Over 20 next…
The Wavelength-shifting Optical Module (WOM) is a novel optical sensor that uses wavelength shifting and light guiding to substantially enhance the photosensitive area of UV optical modules. It has been designed for the IceCube Upgrade, a seven-string extension of the IceCube detector planned for the 2022/2023 South Pole deployment season. The WOM consists of a hollow quartz cylinder coated in wavelength shifting paint which serves as detection area and has two photomultipliers (PMTs) attached to the end faces. The light-collecting tube increases the effective photocathode area of the PMTs wit…
The IceCube Neutrino Observatory instruments about 1 km$^3$ of deep, glacial ice at the geographic South Pole using 5160 photomultipliers to detect Cherenkov light from relativistic, charged particles. Most IceCube science goals rely on precise understanding and modelling of the optical properties of the instrumented ice. A peculiar light propagation effect observed by IceCube is an anisotropic attenuation, which is aligned with the local flow of the ice. Recent efforts have shown this effect is most likely due to curved photon trajectories resulting from the asymmetric light diffusion in the …
Following the first observation of an astrophysical high-energy neutrino flux with the IceCube Neutrino Observatory in 2013 and the identification of a first cosmic high-energy neutrino source in 2017, the detector will be upgraded with about 700 new advanced optical sensors. This will expand IceCube's capabilities both at low and high neutrino energies. A large fraction of the upgrade modules will be multi-PMT Digital Optical Modules, mDOMs, each featuring 24 three-inch class photomultiplier tubes (PMTs) pointing uniformly in all directions, thereby providing an almost homogeneous angular cov…
The IceCube Upgrade will expand the IceCube Neutrino Observatory with nearly 800 new optical modules. A large fraction of these will be multi-PMT optical modules (mDOMs), featuring 24 PMTs pointing uniformly in all directions, providing an almost homogeneous angular coverage and providing an effective photosensitive area more than twice that of current IceCube optical modules. Two PMT models from different manufacturers are currently considered for use in the mDOM: a 3.5 inch PMT from HZC Photonics and a 3 inch PMT from Hamamatsu. Both PMTs have been characterized in terms of gain, timing, qua…
The Precision IceCube Next Generation Upgrade (PINGU) is a proposed low-energy in-fill array of the IceCube Neutrino Observatory. Leveraging technology proven with IceCube, PINGU will feature the world's largest effective volume for neutrinos at an energy threshold of a few GeV, improving the sensitivity to several aspects of neutrino oscillation physics at modest cost. With its unprecedented statistical sample of low-energy atmospheric neutrinos, PINGU will have highly competitive sensitivity to $ν_μ$ disappearance, the $θ_{23}$ octant, and maximal mixing, will make the world's best $ν_τ$ app…
The IceCube Neutrino Observatory will be upgraded with more than 700 additional optical sensor modules and new calibration devices. Improved calibration will enhance IceCube's physics capabilities both at low and high neutrino energies. An important ingredient for good angular resolution of the observatory is precise calibration of the positions of optical sensors. Ten acoustic modules, which are capable of receiving and transmitting acoustic signals, will be attached to the strings. These signals can additionally be detected by compact acoustic sensors inside some of the optical sensor module…
The IceCube Neutrino Observatory will be upgraded with about 700 additional optical sensor modules and new calibration devices. Particularly, improved calibration will enhance IceCube's physics capabilities both at low and high neutrino energies. An important ingredient for a good angular resolution of the observatory is a precise calibration of the positions of optical sensors. We present the concept of newly developed acoustic sensors that are mounted inside the optical modules and additional acoustic emitter modules that are attached to the strings. With this system we aim for the calibrati…
The planned IceCube Upgrade, consisting of seven new instrumentation strings, will be installed at the South Pole within 2022/2023. The focus of this upgrade is calibration, reduction of systematic uncertainties and atmospheric neutrino physics. Within this scope, the "Precision Optical Calibration Module" (POCAM) will be installed at a number of positions on these new strings, to act as a calibration light source. The POCAM is an in-situ self-calibrating, isotropic, nanosecond light source that emits flashes of adjustable intensity and pulse duration. The isotropy is achieved using a teflon i…
New optical sensors called the "D-Egg" have been developed for cost-effective instrumentation for the IceCube Upgrade. With two 8-inch high quantum efficient photomultiplier tubes (PMTs), they offer increased effective photocathode area while retaining as much of the successful IceCube Digital Optical Module design as possible. Mass production of D-Eggs has started in 2020. By the end of 2021, there will be 310 D-Eggs produced with 288 deployed in the IceCube Upgrade. The D-Egg readout system uses advanced technologies in electronics and computing power. Each of the two PMT signals is digitise…
For the in-ice component of the next generation neutrino observatory at the South Pole, IceCube-Gen2, a new sensor module is being developed, which is an evolution of the D-Egg and mDOM sensors developed for the IceCube Upgrade. The sensor design features up to 18 4-inch PMTs distributed homogeneously in a borosilicate glass pressure vessel. Challenges arise for the mechanical design from the tight constraints on the bore hole diameter (which will be 2 inches smaller than for IceCube Upgrade) and from the close packing of the PMTs. The electronics design must meet the space constraints posed b…
The IceCube Upgrade is the first step towards the next-generation neutrino observatory at the South Pole, IceCube-Gen2, and will be installed in the central region of the existing array. The Upgrade will consist of 693 newly developed, densely spaced optical sensors and 50 standalone calibration devices, which will enhance IceCube's capabilities both at low and high neutrino energies. Of the new sensors, 402 will be multi-PMT Digital Optical Modules (mDOMs). Consisting of 24 small photomultipliers arranged inside a pressure vessel, the mDOM features a large sensitive area distributed nearly ho…
The IceCube Neutrino Observatory is a cubic-kilometer scale neutrino detector embedded in the Antarctic ice of the South Pole. In the near future, the detector will be augmented by extensions, such as the IceCube Upgrade and the planned Gen2 detector. The sparseness of observed light in the detector for low-energy events, and the irregular detector geometry, have always been a challenge to the reconstruction of the detected neutrinos' parameters of interest. This challenge remains with the IceCube Upgrade, currently under construction, which introduces seven new detector strings with novel det…
IceCube is a cubic-kilometer scale neutrino telescope located at the geographic South Pole. The detector utilizes the extremely transparent Antarctic ice as a medium for detecting Cherenkov radiation from neutrino interactions. As a result of extensive studies of the optical properties of ice, the light propagation in IceCube is well understood. The ice properties are, however, still dominant sources of detector systematic uncertainties in many IceCube analyses. We have designed a camera system to measure the optical properties of the Antarctic ice surrounding the SPICEcore hole that is an ice…
We present performance studies of a segmented optical module for the IceCube-Gen2 detector. Based on the experience gained in sensor development for the IceCube Upgrade, the new sensor will consist of up to eighteen 4 inch PMTs housed in a transparent pressure vessel, providing homogeneous angular coverage. The use of custom molded optical `gel pads' around the PMTs enhances the photon capture rate via total internal reflection at the gel-air interface. This contribution presents simulation studies of various sensor, PMT, and gel pad geometries aimed at optimizing the sensitivity of the optica…
In this work we discuss ongoing development of a hybrid fiber/copper data and timing infrastructure for the future IceCube-Gen2 detector. The IceCube Neutrino Observatory is a kilometer-scale detector operating with 86 strings of modules. These modules communicate utilizing a custom protocol to mitigate the signaling challenges of long distance copper cables. Moving past the limitations of a copper-based backbone will allow larger future IceCube detectors with extremely precise timing and a large margin of excess throughput to accommodate innovative future modules. To this end, the upcoming Ic…
The IceCube Neutrino Observatory will be upgraded in 2022/23. For this IceCube Upgrade and the planned enlarged detector IceCube-Gen2 new optical modules are under development. One of these optical modules, the Wavelength-shifting Optical Module (WOM), uses wavelength-shifting and light-guiding techniques to measure Cherenkov photons in the UV-range. To understand the potential improvements of this new module the absorption and scattering lengths of UV light in the South Pole ice need to be measured. The measurement is done utilizing an existing borehole (SPICEcore) of 1751 m depth. The SPICEc…
The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is composed of four 12-meter telescopes and a 28-meter one, and is sensitive to gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m telescopes recently underwent a substantial upgrade, with the goal of improving their performance and robustness. The upgrade involved replacing all camera components except for the photomultiplier tubes (PMTs). This meant developing new hardware for the trigger, readout, power, cooling and m…
We present constraints on an astrophysical population of neutrino sources imposed by recent data from the IceCube neutrino observatory. By using the IceCube point source search method to model the detection of sources, our detection criterion is more sensitive than using the observation of high-energy neutrino multiplets for source identification. We frame the problem as a Bayesian hierarchical model to connect the high-level population parameters to the IceCube data, allowing us to consistently account for all relevant sources of uncertainty in our model assumptions. Our results show that sou…
Design and Performance of the Upgraded Prototype Schwarzschild-Couder Telescope Camera Module
INFN Sezione di Perugia（意大利国家核物理研究所佩鲁加分部）；INFN Sezione di Napoli（意大利国家核物理研究所那不勒斯分部）；Dipartimento di Fisica, Università di Trento（特伦托大学物理系）；INFN Sezione di Bari（意大利国家核物理研究所巴里分部）；Center for Astrophysics — Harvard & Smithsonian（哈佛与史密森尼天体物理中心）；Dipartimento di Fisica e Geologia dell’Università degli Studi di Perugia（佩鲁贾大学物理与地质学系）；Dipartimento Interateneo di Fisica dell’Università e del Politecnico di Bari（巴里大学与理工大学联合物理系）；INFN Sezione di Pisa（意大利国家核物理研究所比萨分部）；Department of Physics, Washington University（华盛顿大学物理系）；Department of Physics and Astronomy, Barnard College, Columbia University（哥伦比亚大学巴纳德学院物理与天文学系）；Broadcom Inc.（博通公司）
The IceCube Neutrino Observatory at the South Pole is a multi-component particle detector consisting of the IceTop surface array and the deep in-ice IceCube array. The foreseen enhancement of the surface instrumentation will consist of plastic scintillator panels read out by silicon photomultipliers. This additional detector component will calibrate the effect of snow accumulation on the IceTop tanks, improve the measurement of cosmic rays, and enhance the atmospheric background rejection for the high-energy astrophysical neutrino detection. Two scintillator prototype stations were deployed at…
Refurbishment and Cryocooler Upgrade of the CPAPIR Wide-Field Near-Infrared Camera: Design, Integration, and Lessons Learned
Institut Trottier de Recherche sur les Exoplanètes (IREx), Département de Physique, Université de Montréal（蒙特利尔大学特罗蒂尔系外行星研究所（IREx），物理系）；Observatoire du Mont-Mégantic（蒙梅甘蒂克天文台）
Current generation neutrino telescopes cover an energy range from about 10 GeV to beyond $10^9$ GeV. IceCube sets the scale for future experiments to make improvements. Strategies for future upgrades will be discussed in three energy ranges. At the low-energy end, an infill detector to IceCube's DeepCore would add sensitivity in the energy range from a few to a few tens of GeV with the primary goal of measuring the neutrino mass hierarchy. In the central energy range of classical optical neutrino telescopes, next generation detectors are being pursued in the Mediterranean and at Lake Baikal. T…
The Cherenkov Telescope Array (CTA) is the next-generation ground-based observatory for very-high energy gamma-ray astronomy. CTA will have unparalleled sensitivity and angular resolution and will detect gamma-ray sources nearly 100 times faster than current arrays, enabling valuable multiwavelength and multimessenger observations. The Schwarzschild-Couder Telescope (SCT) is a candidate for the Medium-Sized telescope in CTA. A prototype SCT (pSCT) has been constructed at the Fred Lawrence Whipple Observatory in Arizona USA. Its camera is currently partially instrumented with 1600 pixels (2.7 d…
VERITAS is an array of imaging atmospheric Cherenkov telescopes sensitive to gamma rays in the energy range between 85 GeV and 30 TeV. The instrument underwent an upgrade of the camera triggers in November 2011. The new systems use 400 MHz Xilinix Virtex-5 FPGAs for the pixel neighbor coincidence logic necessary to produce a camera-level trigger. The upgraded systems are capable of time-aligning individual triggering pixels to within ~0.2 nanoseconds, allowing for an operational pixel-to-pixel coincidence window of ~5 nanoseconds. This reduced coincidence window provides improved rejection of …
The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in Namibia. It consists of four 12-m telescopes (CT1-4), which started operations in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is the only IACT system featuring telescopes of different sizes, which provides sensitivity for gamma rays across a very wide energy range, from ~30 GeV up to ~100 TeV. Since the camera electronics of CT1-4 are much older than the one of CT5, an upgrade is being carried out; first deployment was in…
The IceCube neutrino observatory is composed of more than five thousand light sensors, Digital Optical Modules (DOMs), installed on the surface and at depths between 1450 and 2450 m in clear ice at the South Pole. Each DOM incorporates a 10-inch diameter photomultiplier tube (PMT) intended to detect light emitted when high energy neutrinos interact with atoms in the ice. Depending on the energy of the neutrino and the distance from secondary particle tracks, PMTs can be hit by up to several thousand photons within a few hundred nanoseconds. The number of photons per PMT and their time distribu…
Thermal and Optical Characterization of Near-Earth Objects: Science Commissioning of the Recently Upgraded Mid-Infrared Camera MIRSI on the NASA Infrared Telescope Facility
The neutrino mass hierarchy is one of the few remaining unknown parameters in the neutrino sector and hence a primary focus of the experimental community. The Precision IceCube Next Generation Upgrade (PINGU) experiment, to be co-located with the IceCube DeepCore detector in the deep Antarctic glacier, is being designed to provide a first definitive measurement of the mass hierarchy. We have conducted feasibility studies for the detector design that demonstrate a statistically-limited sensitivity to the hierarchy of 2.1 sigma to 3.4 sigma per year is possible, depending on the detector geometr…
We describe an initiative to build and use the Dark Energy Spectrometer (DESpec), a wide-field spectroscopic survey instrument for the Blanco 4 meter telescope at Cerro Tololo InterAmerican Observatory (CTIO) in Chile. A new system with about 4000 robotically positioned optical fibers will be interchangeable with the CCD imager of the existing Dark Energy Camera (DECam), accessing a field of view of 3.8 square degrees in a single exposure. The proposed instrument will be operated by CTIO and available for use by the astronomy community. Our collaboration proposes to use DESpec to conduct a wid…
Constraining the Galactic foregrounds with multi-frequency Cosmic Microwave Background (CMB) observations is an essential step towards ultimately reaching the sensitivity to measure primordial gravitational waves (PGWs), the sign of inflation after the Big-Bang that would be imprinted on the CMB. The BICEP Array telescope is a set of multi-frequency cameras designed to constrain the energy scale of inflation through CMB B-mode searches while also controlling the polarized galactic foregrounds. The lowest frequency BICEP Array receiver (BA1) has been observing from the South Pole since 2020 and…
The IceCube Neutrino Observatory, located at the geographic South Pole, is the world's largest neutrino telescope, instrumenting 1 km$^3$ of Antarctic ice with 5160 photosensors to detect Cherenkov light. For the IceCube Upgrade, to be deployed during the 2022-23 polar field season, and the enlarged detector IceCube-Gen2 several new optical sensor designs are under development. One of these optical sensors, the Wavelength-shifting Optical Module (WOM), uses wavelength-shifting and light-guiding techniques to measure Cherenkov photons in the UV range from 250 nm to 380 nm. In order to understan…
