Under an increasing applied shear stress ($σ$), viscosity of many dense particulate suspensions increases drastically beyond a stress onset ($σ_0$), a phenomenon known as discontinuous shear-thickening (DST). Recent studies point out that some suspensions can transform into a stress induced solid-like shear jammed (SJ) state at high particle volume fraction ($ϕ$). SJ state develops a finite yield stress and hence is distinct from a shear-thickened state. Here, we study the steady state shear-thickening behaviour of dense suspensions formed by dispersing colloidal polystyrene particles (PS) in polyethylene glycol (PEG). We find that for small $σ$ values the viscosity of the suspensions as a function of $ϕ$ can be well described by Krieger-Dougherty (KD) relation. However, for higher values of $σ$ ($>> σ_0$), KD relation systematically overestimates the measured viscosity, particularly for higher $ϕ$ values. This systematic deviation can be rationalized by the weakening of the sample due to flow induced failures of the solid-like SJ state. Using Wyart-Cates model, we propose a method to predict the SJ onset from the steady state rheology measurements. Our results are further supported by in-situ optical imaging of the sample boundary under shear.
We consider percolation and jamming transitions for particulate systems exposed to compression. For the systems built of particles interacting by purely repulsive forces in addition to friction and viscous damping, it is found that these transitions are influenced by a number of effects, and in particular by the compression rate. In a quasi-static limit, we find that for the considered type of interaction between the particles, percolation and jamming transitions coincide. For cohesive systems, however, or for any system exposed to even slow dynamics, the differences between the considered tra…
We numerically study the jamming transition in particulate systems with attraction by investigating their mechanical response at zero temperature. We find three regimes of mechanical behavior separated by two critical transitions--connectivity and rigidity percolation. The transitions belong to different universality classes than their lattice counterparts, due to force balance constraints. We also find that these transitions are unchanged at low temperatures and resemble gelation transitions in experiments on colloidal and silica gels.
We perform numerical simulations of athermal repulsive frictionless disks and spheres in two and three spatial dimensions undergoing cyclic quasi-static simple shear to investigate particle-scale reversible motion. We identify three classes of steady-state dynamics as a function of packing fraction ϕand maximum strain amplitude per cycle γ_{\rm max}. Point-reversible states, where particles do not collide and exactly retrace their intra-cycle trajectories, occur at low ϕand γ_{\rm max}. Particles in loop-reversible states undergo numerous collisions and execute complex trajectories, but return…
We study the flow of model experimental hard sphere colloidal suspensions at high volume fraction $Φ$ driven through a constriction by a pressure gradient. Above a particle-size dependent limit $Φ_0$, direct microscopic observations demonstrate jamming and unjamming--conversion of fluid to solid and vice versa--during flow. We show that such a jamming flow produces a reduction in colloid concentration $Φ_{x}$ downstream of the constriction. We propose that this `self-filtration' effect is the consequence of a combination of jamming of the particulate part of the system and continuing flow of t…
Rheological properties of dense flows of hard particles are singular as one approaches the jamming threshold where flow ceases, both for granular flows dominated by inertia, and for over-damped suspensions. Concomitantly, the lengthscale characterizing velocity correlations appears to diverge at jamming. Here we review a theoretical framework that gives a scaling description of stationary flows of frictionless particles. Our analysis applies both to suspensions and inertial flows of hard particles. We report numerical results in support of the theory, and show the phase diagram that results wh…
A remarkable property of dense suspensions is that they can transform from liquid-like at rest to solid-like under sudden impact. Previous work showed that this impact-induced solidification involves rapidly moving jamming fronts; however, details of this process have remained unresolved. Here we use high-speed ultrasound imaging to probe non-invasively how the interior of a dense suspension responds to impact. Measuring the speed of sound we demonstrate that the solidification proceeds without a detectable increase in packing fraction, and imaging the evolving flow field we find that the shea…
Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shape has so far not been studied systematically. To address this we here synthesize smooth silica particles and design the particle surface chemistry to generate strong frictional interactions such that …
The application of concepts from equilibrium statistical mechanics to out-of-equilibrium systems has a long history of describing diverse systems ranging from glasses to granular materials. For dissipative jammed systems-- particulate grains or droplets-- a key concept is to replace the energy ensemble describing conservative systems by the volume-stress ensemble. Here, we test the applicability of the volume-stress ensemble to describe the jamming transition by comparing the jammed configurations obtained by dynamics with those averaged over the ensemble as a probe of ergodicity. Agreement be…
The drainage of particulate foams is studied under conditions where the particles are not trapped individually by constrictions of the interstitial pore space. The drainage velocity decreases continuously as the particle volume fraction $ϕ_{p}$ increases. The suspensions jam - and therefore drainage stops - for values $ϕ_{p}^{*}$ which reveal a strong effect of the particle size. In accounting for the particular geometry of the foam, we show that $ϕ_{p}^{*}$ accounts for unusual confinement effects when the particles pack into the foam network. We model quantitatively the overall behavior of t…
We report on rheometry measurements to characterize critical behavior in two model shear thickening suspensions: cornstarch in water and glass spheres in oil. The slope of the shear thickening part of the viscosity curve is found to increase dramatically with packing fraction and diverge at a critical packing fraction phi_c. The magnitude of the viscosity and the yield stress are also found to have scalings that diverge at phi_c. We observe shear thickening as long as the yield stress is less than the stress at the viscosity maximum. Above this point the suspensions transition to purely shear …
The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so far remained unclear. Here, we present atomic force microscopy studies to assess interparticle adhesion, its relationship to friction, and how these attributes are influenced by urea, a molecule that in…
Dense particulate suspensions can not only increase their viscosity and shear thicken under external forcing, but also jam into a solid-like state that is fully reversible when the force is removed. An impact on the surface of a dense suspension can trigger this jamming process by generating a shear front that propagates into the bulk of the system. Tracking and visualizing such a front is difficult because suspensions are optically opaque and the front can propagate as fast as several meters per second. Recently, high-speed ultrasound imaging has been used to overcome this problem and extract…
Unlike dry granular materials, a dense granular suspension like cornstarch in water can strongly resist extensional flows. At low extension rates, such a suspension behaves like a viscous liquid, but rapid extension results in a response where stresses far exceed the predictions of lubrication hydrodynamics and capillarity. To understand this remarkable mechanical response, we experimentally measure the normal force imparted by a large bulk of the suspension on a plate moving vertically upward at a controlled velocity. We observe that above a velocity threshold, the peak force increases by ord…
Packings of frictionless athermal particles that interact only when they overlap experience a jamming transition as a function of packing density. Such packings provide the foundation for the theory of jamming. This theory rests on the observation that, despite the multitude of disordered configurations, the mechanical response to linear order depends only on the distance to the transition. We investigate the validity and utility of such measurements that invoke the harmonic approximation and show that, despite particles coming in and out of contact, there is a well-defined linear regime in th…
Simulations are used to study the steady shear rheology of dense suspensions of frictional particles exhibiting discontinuous shear thickening and shear jamming, in which finite-range cohesive interactions result in a yield stress. We develop a constitutive model that combines yielding behavior and shear thinning at low stress with the frictional shear thickening at high stresses, in good agreement with the simulation results. This work shows that there is a distinct difference between solids below the yield stress and in the shear-jammed state, as the two occur at widely separated stress leve…
We experimentally investigate particle migration in a non-Brownian suspension sheared in a Taylor-Couette configuration and in the limit of vanishing Reynolds number. Highly resolved index-matching techniques are used to measure the local particulate volume fraction. In this wide-gap Taylor-Couette configuration, we find that for a large range of bulk volume fraction, $ϕ_b \in [20\% - 50\%]$, the fully developed concentration profiles are well predicted by the suspension balance model of Nott \& Brady (J. Fluid Mech., vol. 275, 1994, pp. 157-199). Moreover, we provide systematic measurements o…
We study the steady-state response to applied stress in a simple scalar model of sheared colloids. Our model is based on a schematic (F2) model of the glass transition, with a memory term that depends on both stress and shear rate. For suitable parameters, we find transitions from a fluid to a nonergodic, jammed state, showing zero flow rate in an interval of applied stress. Although the jammed state is a glass, we predict that jamming transitions have an analytical structure distinct from that of the conventional mode coupling glass transition. The static jamming transition we discuss is also…
We study granular suspensions under a variety of extensional deformations and simple shear using numerical simulations. The viscosity and Trouton's ratio (the ratio of extensional to shear viscosity) are computed as functions of solids volume fraction $ϕ$ close to the limit of zero inertia. Suspensions of frictionless particles follow a Newtonian Trouton's ratio for $ϕ$ all the way up to $ϕ_0$, a universal jamming point that is independent of deformation type. In contrast, frictional particles lead to a deformation-type-dependent jamming fraction $ϕ_m$, which is largest for shear flows. Trouto…
Recent advances in shear-thickening suspension rheology suggest a relation between (wet) suspension flow below jamming and (dry) granular physics. To probe this connection, we simulated the contact force networks in suspensions of non-Brownian spheres using the discrete element method (DEM), varying the particle friction coefficient and volume fraction. We find that force networks in these suspensions show quantitative similarities to those in jammed dry grains. As suspensions approach the jamming point, the extrapolated volume fraction and coordination number at jamming are similar to critica…
Dense suspensions of hard particles in a liquid can exhibit strikingly counter-intuitive behavior, such as discontinuous shear thickening (DST) [1-8] and reversible shear jamming (SJ) into a state with finite yield stress [9-13]. Recent studies identified a stress-activated crossover from hydrodynamic interactions to frictional particle contacts to be key for these behaviors [2-4, 6-8, 10, 14]. However, many suspensions exhibit only DST and not SJ. Here we show that particle surface chemistry can play a central role in creating conditions that allow for SJ. We find the system's ability to form…
A tenuous monolayer of hydrophobic particles at the air-water interface often forms a scum or raft. When such a monolayer is disturbed by the localized introduction of a surfactant droplet, a radially divergent surfactant shock front emanates from the surfactant origin and packs the particles into a jammed, compact, annular band with a packing fraction that saturates at a peak packing fraction $ϕ^*$. As the resulting two-dimensional, disordered elastic band grows with time and is driven radially outwards by the surfactant, it fractures to form periodic triangular cracks with robust geometrical…
As the glass (in molecular fluids\cite{Donth}) or the jamming (in colloids and grains\cite{LiuNature1998}) transitions are approached, the dynamics slow down dramatically with no marked structural changes. Dynamical heterogeneity (DH) plays a crucial role: structural relaxation occurs through correlated rearrangements of particle ``blobs'' of size $ξ$\cite{WeeksScience2000,DauchotPRL2005,Glotzer,Ediger}. On approaching these transitions, $ξ$ grows in glass-formers\cite{Glotzer,Ediger}, colloids\cite{WeeksScience2000,BerthierScience2005}, and driven granular materials\cite{KeysNaturePhys2007} a…
Dynamic jamming is a phenomenon whereby a dense suspension switches from a fluid-like to a solid-like state when subjected to sufficient stress and deformation. Large enough systems show that this transition is accompanied by a distinct jamming front. We present an experimental study where two jamming fronts are created simultaneously using two cylinders moving in parallel. We focus our observations on the collision of the jammed regions when the two fronts meet. Surprisingly, our measurements, combining surface texture visualization and time-resolved particle image velocimetry, show the forma…
Jamming is a fundamental transition that governs the mechanical behavior of particulate media, including sand, foam and dense suspensions but also biological tissues: Upon compression, particulate media can change from freely flowing to a disordered solid. Jamming has previously been conceived as a bulk phenomenon involving particle motions in fixed geometries. In a diverse class of soft materials, however, solidification can take place in a deformable geometry, such as on the surface of a fluid droplet or in the formation of a bijel. In these systems the nature and dynamics of jamming remains…
We investigated the effects of particle shape on shear thickening in densely packed suspensions. Rods of different aspect ratios and non-convex hooked rods were fabricated. Viscosity curves and normal stresses were measured using a rheometer for a wide range of packing fractions for each shape. Suspensions of each shape exhibit qualitatively similar Discontinuous Shear Thickening. The logarithmic slope of the stress/shear-rate relation increases dramatically with packing fraction and diverges at a critical packing fraction phi_c which depends on particle shape. The packing fraction dependence …
The formation of drops of a complex fluid, for instance including dissolved polymers and/or solid particles, has practical implications in several industrial and biophysical processes. In this Letter, we experimentally investigate the generation of drops of a viscoelastic suspension, made of non-Brownian spherical particles dispersed in a dilute polymer solution. Using high-speed imaging, we characterize the different stages of the detachment. Our experiments show that the particles primarily affect the initial Newtonian necking by increasing the fluid viscosity. In the viscoelastic regime, pa…
Jamming is a phenomenon occurring in systems as diverse as traffic, colloidal suspensions and granular materials. A theory on the reversible elastic deformation of jammed states is presented. First, an explicit granular stress-strain relation is derived that captures many relevant features of sand, including especially the Coulomb yield surface and a third-order jamming transition. Then this approach is generalized, and employed to consider jammed magneto- and electro-rheological fluids, again producing results that compare well to experiments and simulations.
Under an applied traction, highly concentrated suspensions of solid particles in fluids can turn from a state in which they flow to a state in which they counteract the traction as an elastic solid: a shear-jammed state. Remarkably, the suspension can turn back to the flowing state simply by inverting the traction. A tensorial model is presented and tested in paradigmatic cases. We show that, to reproduce the phenomenology of shear jamming in generic geometries, it is necessary to link this effect to the elastic response supported by the suspension microstructure rather than to a divergence of…
When a droplet is generated, the ligament connecting the drop to the nozzle thins down and eventually pinches off. Adding solid particles to the liquid phase leads to a more complex dynamic, notably by increasing the shear viscosity. Moreover, it introduces an additional length scale to the system, the diameter of the particles, which eventually becomes comparable to the diameter of the ligament. In this paper, we experimentally investigate the thinning and pinch-off of drops of suspensions with two different sizes of particles. We characterize the thinning for different particle size ratios a…
We study numerically a system of athermal, overdamped, frictionless spheres, as in a non-Brownian suspension, in two and three dimensions. Compressing the system isotropically at a fixed rate $\dotε$, we investigate the critical behavior at the jamming transition. The finite compression rate introduces a control timescale, which allows one to probe the critical timescale associated with jamming. As was found previously for steady-state shear-driven jamming, we find for compression-driven jamming that pressure obeys a critical scaling relation as a function of packing fraction $ϕ$ and compressi…
In their Letter, Schreck, Bertrand, O'Hern and Shattuck [Phys. Rev. Lett. 107, 078301 (2011)] study nonlinearities in jammed particulate systems that arise when contacts are altered. They conclude that there is "no harmonic regime in the large system limit for all compressions" and "at jamming onset for any system size." Their argument rests on the claim that for finite-range repulsive potentials, of the form used in studies of jamming, the breaking or forming of a single contact is sufficient to destroy the linear regime. We dispute these conclusions and argue that linear response is both jus…
The displacement of a suspension of particles by an immiscible fluid in a capillary tube or in a porous media is a canonical configuration that finds application in a large number of natural and industrial applications, including water purification, dispersion of colloids and microplastics, coating and functionalization of tubings. The influence of particles dispersed in the fluid on the interfacial dynamics and on the properties of the liquid film left behind remain poorly understood. Here, we study the deposition of a coating film on the walls of a capillary tube induced by the translation o…
Discontinuous shear-thickening in dense suspensions naturally emerges from the activation of frictional forces by shear flow in non-Brownian systems close to jamming. Yet, this physical picture is incomplete as most experiments study soft colloidal particles subject to thermal fluctuations. To characterise discontinuous shear-thickening in colloidal suspensions we use computer simulations to provide a complete description of the competition between athermal jamming, frictional forces, thermal motion, particle softness, and shear flow. We intentionally neglect hydrodynamics, electrostatics, lub…
We study the rheology of cornstarch suspensions, a dense system of non-Brownian particles that exhibits shear thickening, i.e. a viscosity that increases with increasing shear rate. Using MRI velocimetry we show that the suspension has a yield stress. From classical rheology it follows that as a function of the applied stress the suspension is first solid (yield stress), then liquid and then solid again when it shear thickens. The onset shear rate for thickening is found to depend on the measurement geometry: the smaller the gap of the shear cell, the lower the shear rate at which thickening o…
We study the rheological properties of a granular suspension subject to constant shear stress by constant volume molecular dynamics simulations. We derive the system `flow diagram' in the volume fraction/stress plane $(ϕ,F)$: at low $ϕ$ the flow is disordered, with the viscosity obeying a Bagnold-like scaling only at small $F$ and diverging as the jamming point is approached; if the shear stress is strong enough, at higher $ϕ$ an ordered flow regime is found, the order/disorder transition being marked by a sharp drop of the viscosity. A broad jamming region is also observed where, in analogy w…
Measurements of the surface velocity and surface texture of a freely propagating shear jamming front in a dense suspension are compared. The velocity fields are captured with particle image velocimetry (PIV), while the surface texture is captured in a separated experiment by observing a direct reflection on the suspension surface with high-speed cameras. A method for quantifying the surface features and their orientation is presented based on the fast Fourier transform of localised windows. The region that exhibits strong surface features corresponds to the the solid-like jammed region identif…
Shear thickening is a type of non-Newtonian behavior in which the stress required to shear a fluid increases faster than linearly with shear rate. Many concentrated suspensions of particles exhibit an especially dramatic version, known as Discontinuous Shear Thickening (DST), in which the stress suddenly jumps with increasing shear rate and produces solid-like behavior. The best known example of such counter-intuitive response to applied stresses occurs in mixtures of cornstarch in water. Over the last several years, this shear-induced solid-like behavior together with a variety of other unusu…
The reversible aggregates formation in a shear thickening, concentrated colloidal suspension is investigated through speckle visibility spectroscopy, a dynamic light scattering technique recently introduced [P.K. Dixon and D.J. Durian, Phys. Rev. Lett. 90, 184302 (2003)]. Formation of particles aggregates is observed in the jamming regime, and their relaxation after shear cessation is monitored as a function of the applied shear stress. The aggregates relaxation time increases when a larger stress is applied. Several phenomena have been proposed to interpret this behavior: an increase of the a…
Non-particulate continuum descriptions allow for computationally efficient modeling of suspension flows at scales that are inaccessible to more detailed particulate approaches. It is well known that the presence of particles influences the effective viscosity of a suspension and that this effect has thus to be accounted for in macroscopic continuum models. The present paper aims at developing a non-particulate model that reproduces not only the rheology but also the cell-induced velocity fluctuations, responsible for enhanced diffusivity. The results are obtained from a coarse-grained blood mo…
We report experiments investigating jamming fronts in a floating layer of cornstarch suspension. The suspension has a packing fraction close to jamming, which dynamically turns into a solid when impacted at a high speed. We show that the front propagates in both axial and transverse direction from the point of impact, with a constant ratio between the two directions of propagation of approximately 2. Inside the jammed solid, we observe an additional compression, which results from the increasing stress as the solid grows. During the initial growth of the jammed solid, we measure a force respon…
We study relaxation and rheology of dense athermal suspensions of frictionless particles close below the jamming density. Our key quantity, the relaxation time---determined from the exponential decay of the energy after the shearing has suddenly been switched off---is argued to be a determining factor behind the algebraic divergence of various quantities as the jamming density is approached from below. We also define and measure the ``dissipation time'', which is obtained directly in shearing simulations and find that it behaves similarly to the relaxation time. Comparing shear viscosity with …
We simulate a relaxation process of non-brownian particles in a sheared viscous medium; the small shear strain is initially applied to a system, which then undergoes relaxation. The relaxation time and the correlation length are estimated as functions of density, which algebraically diverge at the jamming density. This implies that the relaxation time can be scaled by the correlation length using the dynamic critical exponent, which is estimated as 4.6(2). It is also found that shear stress undergoes power-law decay at the jamming density, which is reminiscent of critical slowing down.
Dip-coating consists in withdrawing a substrate from a bath to coat it with a thin liquid layer. This process is well-understood for homogeneous fluids, but heterogeneities such as particles dispersed in the liquid lead to more complex situations. Indeed, particles introduce a new length scale, their size, in addition to the thickness of the coating film. Recent studies have shown that at first order, the thickness of the coating film for monodisperse particles can be captured by an effective capillary number based on the viscosity of the suspension, providing that the film is thicker than the…
The dynamical mechanisms controlling the rheology of dense suspensions close to jamming are investigated numerically, using simplified models for the relevant dissipative forces. We show that the velocity fluctuations control the dissipation rate and therefore the effective viscosity of the suspension. These fluctuations are similar in quasi-static simulations and for finite strain rate calculations with various damping schemes. We conclude that the statistical properties of grain trajectories -- in particular the critical exponent of velocity fluctuations with respect to volume fraction ϕ-- o…
In this work we, study shear reversals of dense non-Brownian suspensions composed of cohesionless elliptical particles. By numerical simulations, we show that a new fragility appears for frictionless ellipses in the flowing states, where particles can flow indefinitely in one direction at applied shear stresses but shear-jams in the other direction upon shear stress reversal. This new fragility, absent in the isotropic particle case, is linked to the directional order of the elongated particles at steady shear and its reorientation at shear stress reversal, which forces the suspensions to pass…
Under applied stress, the viscosity of many dense particulate suspensions increases drastically, a response known as discontinuous shear-thickening (DST). In some cases, the applied stress can even transform the suspension into a solid-like shear jammed state. Although shear jamming (SJ) has been probed for dense suspensions with particles having well-defined shapes, such a phenomenon for fractal objects has not been explored. Here, using rheology and in situ optical imaging, we study the flow behaviour of ultra-dilute fractal suspensions of multi-walled carbon nanotubes (MWCNT) under confinem…
Experimental results of towing a cylinder through a dense suspension of cornstarch and sucrose-water are presented. Focus is placed on the jamming fronts that exist in such systems. The literature has concentrated on the propagation of the jammed region under pushing, pulling or shearing conditions independently. How the different fronts interact and if the fronts are symmetric when generated simultaneously has remained unexplored. Investigating this is our main goal. With the current setup, we are able to view a continuous, quasi-2D field around the cylinder. As such, a new way of generating …
The phenomenon of shear-induced jamming is a factor in the complex rheological behavior of dense suspensions. Such shear-jammed states are fragile, i.e., they are not stable against applied stresses that are incompatible with the stress imposed to create them. This peculiar flow-history dependence of the stress response is due to flow-induced microstructures. To examine jammed states realized under constant shear stress, we perform dynamic simulations of non-Brownian particles with frictional contact forces and hydrodynamic lubrication forces. We find clear signatures that distinguish these fr…
