We introduce UprightNet, a learning-based approach for estimating 2DoF camera orientation from a single RGB image of an indoor scene. Unlike recent methods that leverage deep learning to perform black-box regression from image to orientation parameters, we propose an end-to-end framework that incorporates explicit geometric reasoning. In particular, we design a network that predicts two representations of scene geometry, in both the local camera and global reference coordinate systems, and solves for the camera orientation as the rotation that best aligns these two predictions via a differentiable least squares module. This network can be trained end-to-end, and can be supervised with both ground truth camera poses and intermediate representations of surface geometry. We evaluate UprightNet on the single-image camera orientation task on synthetic and real datasets, and show significant improvements over prior state-of-the-art approaches.
Vehicle re-identification is a challenging task due to high intra-class variances and small inter-class variances. In this work, we focus on the failure cases caused by similar background and shape. They pose serve bias on similarity, making it easier to neglect fine-grained information. To reduce the bias, we propose an approach named VOC-ReID, taking the triplet vehicle-orientation-camera as a whole and reforming background/shape similarity as camera/orientation re-identification. At first, we train models for vehicle, orientation and camera re-identification respectively. Then we use orient…
Multi-camera orientation tracking method for anisotropic particles in particle-laden flows
Physics of Fluids Department and Max Planck Center for Complex Fluid Dynamics, J. M. Burgers Centre for Fluid Dynamics, University of Twente（流体物理系和马克斯·普朗克复杂流体动力学中心，约恩·米歇尔·伯格斯流体动力学中心，特文特大学）；ENS de Lyon, CNRS, LPENSL, UMR5672（里昂国立应用科学学院，法国国家科学研究中心，LPENSL，UMR5672）
University of Massachusetts, Amherst（马萨诸塞大学阿默斯特分校）
In moving camera videos, motion segmentation is commonly performed using the image plane motion of pixels, or optical flow. However, objects that are at different depths from the camera can exhibit different optical flows even if they share the same real-world motion. This can cause a depth-dependent segmentation of the scene. Our goal is to develop a segmentation algorithm that clusters pixels that have similar real-world motion irrespective of their depth in the scene. Our solution uses optical flow orientations instead of the complete vectors and exploits the well-known property that under …
School of Computer Science, University of Adelaide（阿德莱德大学计算机科学学院）
Estimating absolute camera orientations is essential for attitude estimation tasks. An established approach is to first carry out visual odometry (VO) or visual SLAM (V-SLAM), and retrieve the camera orientations (3 DOF) from the camera poses (6 DOF) estimated by VO or V-SLAM. One drawback of this approach, besides the redundancy in estimating full 6 DOF camera poses, is the dependency on estimating a map (3D scene points) jointly with the 6 DOF poses due to the basic constraint on structure-and-motion. To simplify the task of absolute orientation estimation, we formulate the monocular rotatio…
Essential matrix averaging, i.e., the task of recovering camera locations and orientations in calibrated, multiview settings, is a first step in global approaches to Euclidean structure from motion. A common approach to essential matrix averaging is to separately solve for camera orientations and subsequently for camera positions. This paper presents a novel approach that solves simultaneously for both camera orientations and positions. We offer a complete characterization of the algebraic conditions that enable a unique Euclidean reconstruction of $n$ cameras from a collection of $(^n_2)$ ess…
EPFL（洛桑联邦理工学院）；Balgrist University Hospital（巴尔格里斯特大学医院）；University of Zurich（苏黎世大学）；The University of British Columbia（英属哥伦比亚大学）
In sports, such as alpine skiing, coaches would like to know the speed and various biomechanical variables of their athletes and competitors. Existing methods use either body-worn sensors, which are cumbersome to setup, or manual image annotation, which is time consuming. We propose a method for estimating an athlete's global 3D position and articulated pose using multiple cameras. By contrast to classical markerless motion capture solutions, we allow cameras to rotate freely so that large capture volumes can be covered. In a first step, tight crops around the skier are predicted and fed to a …
We introduce CGA-PoseNet, which uses the 1D-Up approach to Conformal Geometric Algebra (CGA) to represent rotations and translations with a single mathematical object, the motor, for camera pose regression. We do so starting from PoseNet, which successfully predicts camera poses from small datasets of RGB frames. State-of-the-art methods, however, require expensive tuning to balance the orientational and translational components of the camera pose.This is usually done through complex, ad-hoc loss function to be minimized, and in some cases also requires 3D points as well as images. Our approac…
Junctions reflect the important geometrical structure information of the image, and are of primary significance to applications such as image matching and motion analysis. Previous event-based feature extraction methods are mainly focused on corners, which mainly find their locations, however, ignoring the geometrical structure information like orientations and scales of edges. This paper adapts the frame-based a-contrario junction detector(ACJ) to event data, proposing the event-based a-contrario junction detector(e-ACJ), which yields junctions' locations while giving the scales and orientati…
Australian Centre for Field Robotics（澳大利亚野外机器人学中心）；University of Sydney（悉尼大学）
Semantic segmentation using deep neural networks has been widely explored to generate high-level contextual information for autonomous vehicles. To acquire a complete $180^\circ$ semantic understanding of the forward surroundings, we propose to stitch semantic images from multiple cameras with varying orientations. However, previously trained semantic segmentation models showed unacceptable performance after significant changes to the camera orientations and the lighting conditions. To avoid time-consuming hand labeling, we explore and evaluate the use of data augmentation techniques, specific…
Accurate pedestrian orientation estimation of autonomous driving helps the ego vehicle obtain the intentions of pedestrians in the related environment, which are the base of safety measures such as collision avoidance and prewarning. However, because of relatively small sizes and high-level deformation of pedestrians, common pedestrian orientation estimation models fail to extract sufficient and comprehensive information from them, thus having their performance restricted, especially monocular ones which fail to obtain depth information of objects and related environment. In this paper, a nove…
Calibration in a multi camera network has widely been studied for over several years starting from the earlier days of photogrammetry. Many authors have presented several calibration algorithms with their relative advantages and disadvantages. In a stereovision system, multiple view reconstruction is a challenging task. However, the total computational procedure in detail has not been presented before. Here in this work, we are dealing with the problem that, when a world coordinate point is fixed in space, image coordinates of that 3D point vary for different camera positions and orientations.…
Horizon Robotics（地平线机器人）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；Beijing University of Posts and Telecommunications（北京邮电大学）
Multi-target Multi-camera Tracking (MTMCT) aims to extract the trajectories from videos captured by a set of cameras. Recently, the tracking performance of MTMCT is significantly enhanced with the employment of re-identification (Re-ID) model. However, the appearance feature usually becomes unreliable due to the occlusion and orientation variance of the targets. Directly applying Re-ID model in MTMCT will encounter the problem of identity switches (IDS) and tracklet fragment caused by occlusion. To solve these problems, we propose a novel tracking framework in this paper. In this framework, th…
Gaze detection and head orientation are an important part of many advanced human-machine interaction applications. Many systems have been proposed for gaze detection. Typically, they require some form of user cooperation and calibration. Additionally, they may require multiple cameras and/or restricted head positions. We present a new approach for inference of both face orientation and gaze direction from a single image with no restrictions on the head position. Our algorithm is based on a face and eye model, deduced from anthropometric data. This approach allows us to use a single camera and …
Computer Vision Center（计算机视觉中心）；Universitat Autònoma de Barcelona（巴塞罗那自治大学）
Vision-based bronchoscopy (VB) models require the registration of the virtual lung model with the frames from the video bronchoscopy to provide effective guidance during the biopsy. The registration can be achieved by either tracking the position and orientation of the bronchoscopy camera or by calibrating its deviation from the pose (position and orientation) simulated in the virtual lung model. Recent advances in neural networks and temporal image processing have provided new opportunities for guided bronchoscopy. However, such progress has been hindered by the lack of comparative experiment…
Stanford University（斯坦福大学）；SLAC National Accelerator（SLAC国家加速器实验室）
Cryo-electron microscopy (cryo-EM) is capable of producing reconstructed 3D images of biomolecules at near-atomic resolution. As such, it represents one of the most promising imaging techniques in structural biology. However, raw cryo-EM images are only highly corrupted - noisy and band-pass filtered - 2D projections of the target 3D biomolecules. Reconstructing the 3D molecular shape starts with the removal of image outliers, the estimation of the orientation of the biomolecule that has produced the given 2D image, and the estimation of camera parameters to correct for intensity defects. Curr…
Over the past decade, there has been a significant increase in the use of Unmanned Aerial Vehicles (UAVs) to support a wide variety of missions, such as remote surveillance, vehicle tracking, and object detection. For problems involving processing of areas larger than a single image, the mosaicking of UAV imagery is a necessary step. Real-time image mosaicking is used for missions that requires fast response like search and rescue missions. It typically requires information from additional sensors, such as Global Position System (GPS) and Inertial Measurement Unit (IMU), to facilitate direct o…
Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室）；University of Oxford（牛津大学）
In this paper we present a simple and robust method for self-correction of camera distortion using single images of scenes which contain straight lines. Since the most common distortion can be modelled as radial distortion, we illustrate the method using the Harris radial distortion model, but the method is applicable to any distortion model. The method is based on transforming the edgels of the distorted image to a 1-D angular Hough space, and optimizing the distortion correction parameters which minimize the entropy of the corresponding normalized histogram. Properly corrected imagery will h…
Tampere University of Technology（坦佩雷理工大学）；Universidad Industrial de Santander（桑坦德工业大学）；Czech Technical University in Prague（布拉格捷克理工大学）
We consider a single-query 6-DoF camera pose estimation with reference images and a point cloud, i.e. the problem of estimating the position and orientation of a camera by using reference images and a point cloud. In this work, we perform a systematic comparison of three state-of-the-art strategies for 6-DoF camera pose estimation, i.e. feature-based, photometric-based and mutual-information-based approaches. The performance of the studied methods is evaluated on two standard datasets in terms of success rate, translation error and max orientation error. Building on the results analysis, we pr…
We study the use of overlapping and non-overlapping camera layouts in estimating the ego-motion of a moving robot. To estimate the location and orientation of the robot, we investigate using four cameras as non-overlapping individuals, and as two stereo pairs. The pros and cons of the two approaches are elucidated. The cameras work independently and can have larger field of view in the non-overlapping layout. However, a scale factor ambiguity should be dealt with. On the other hand, stereo systems provide more accuracy but require establishing feature correspondence with more computational dem…
Camera pose regression methods apply a single forward pass to the query image to estimate the camera pose. As such, they offer a fast and light-weight alternative to traditional localization schemes based on image retrieval. Pose regression approaches simultaneously learn two regression tasks, aiming to jointly estimate the camera position and orientation using a single embedding vector computed by a convolutional backbone. We propose an attention-based approach for pose regression, where the convolutional activation maps are used as sequential inputs. Transformers are applied to encode the se…
The estimation of the orientation of an observed vehicle relative to an Autonomous Vehicle (AV) from monocular camera data is an important building block in estimating its 6 DoF pose. Current Deep Learning based solutions for placing a 3D bounding box around this observed vehicle are data hungry and do not generalize well. In this paper, we demonstrate the use of monocular visual odometry for the self-supervised fine-tuning of a model for orientation estimation pre-trained on a reference domain. Specifically, while transitioning from a virtual dataset (vKITTI) to nuScenes, we recover up to 70%…
University of British Columbia（英属哥伦比亚大学）；Tongji University（同济大学）
Calibrating narrow field of view soccer cameras is challenging because there are very few field markings in the image. Unlike previous solutions, we propose a two-point method, which requires only two point correspondences given the prior knowledge of base location and orientation of a pan-tilt-zoom (PTZ) camera. We deploy this new calibration method to annotate pan-tilt-zoom data from soccer videos. The collected data are used as references for new images. We also propose a fast random forest method to predict pan-tilt angles without image-to-image feature matching, leading to an efficient ca…
Correspondences between 3D lines and their 2D images captured by a camera are often used to determine position and orientation of the camera in space. In this work, we propose a novel algebraic algorithm to estimate the camera pose. We parameterize 3D lines using Plücker coordinates that allow linear projection of the lines into the image. A line projection matrix is estimated using Linear Least Squares and the camera pose is then extracted from the matrix. An algebraic approach to handle mismatched line correspondences is also included. The proposed algorithm is an order of magnitude faster y…
Deep learning has shown to be effective for robust and real-time monocular image relocalisation. In particular, PoseNet is a deep convolutional neural network which learns to regress the 6-DOF camera pose from a single image. It learns to localize using high level features and is robust to difficult lighting, motion blur and unknown camera intrinsics, where point based SIFT registration fails. However, it was trained using a naive loss function, with hyper-parameters which require expensive tuning. In this paper, we give the problem a more fundamental theoretical treatment. We explore a number…
We study the problem of learning to assign a characteristic pose, i.e., scale and orientation, for an image region of interest. Despite its apparent simplicity, the problem is non-trivial; it is hard to obtain a large-scale set of image regions with explicit pose annotations that a model directly learns from. To tackle the issue, we propose a self-supervised learning framework with a histogram alignment technique. It generates pairs of image patches by random rescaling/rotating and then train an estimator to predict their scale/orientation values so that their relative difference is consistent…
With the recent proliferation of consumer-grade 360° cameras, it is worth revisiting visual perception challenges with spherical cameras given the potential benefit of their global field of view. To this end we introduce a spherical convolutional hourglass network (SCHN) for the dense labeling on the sphere. The SCHN is invariant to camera orientation (lifting the usual requirement for `upright' panoramic images), and its design is scalable for larger practical datasets. Initial experiments show promising results on a spherical semantic segmentation task.
Australian National University（澳大利亚国立大学）；Huawei（华为）；University of Oxford（牛津大学）；Data61/CSIRO（澳大利亚联邦科学与工业研究组织数据61所）
We address the problem of ground-to-satellite image geo-localization, that is, estimating the camera latitude, longitude and orientation (azimuth angle) by matching a query image captured at the ground level against a large-scale database with geotagged satellite images. Our prior arts treat the above task as pure image retrieval by selecting the most similar satellite reference image matching the ground-level query image. However, such an approach often produces coarse location estimates because the geotag of the retrieved satellite image only corresponds to the image center while the ground …
University of Alberta（阿尔伯塔大学）；NUDT（国防科技大学）；Huawei Fields Lab（华为Fields实验室）
The recent development of the on-chip micro-polarizer technology has made it possible to acquire four spatially aligned and temporally synchronized polarization images with the same ease of operation as a conventional camera. In this paper, we investigate the use of this sensor technology in high-dynamic-range (HDR) imaging. Specifically, observing that natural light can be attenuated differently by varying the orientation of the polarization filter, we treat the multiple images captured by the polarization camera as a set captured under different exposure times. In our approach, we first stud…
University of Toronto（多伦多大学）；Institute for Aerospace Studies（航空航天研究所）
Accurately estimating the orientation of pedestrians is an important and challenging task for autonomous driving because this information is essential for tracking and predicting pedestrian behavior. This paper presents a flexible Virtual Multi-View Synthesis module that can be adopted into 3D object detection methods to improve orientation estimation. The module uses a multi-step process to acquire the fine-grained semantic information required for accurate orientation estimation. First, the scene's point cloud is densified using a structure preserving depth completion algorithm and each poin…
Carnegie Mellon University（卡内基梅隆大学）；The Hebrew University of Jerusalem（耶路撒冷希伯来大学）；General Motors（通用汽车公司）
We propose a robust method for estimating road curb 3D parameters (size, location, orientation) using a calibrated monocular camera equipped with a fisheye lens. Automatic curb detection and localization is particularly important in the context of Advanced Driver Assistance System (ADAS), i.e. to prevent possible collision and damage of the vehicle's bumper during perpendicular and diagonal parking maneuvers. Combining 3D geometric reasoning with advanced vision-based detection methods, our approach is able to estimate the vehicle to curb distance in real time with mean accuracy of more than 9…
Aston University（阿斯顿大学）；Universidad de Extremadura（埃斯特雷马杜拉大学）
Estimating the location and orientation of humans is an essential skill for service and assistive robots. To achieve a reliable estimation in a wide area such as an apartment, multiple RGBD cameras are frequently used. Firstly, these setups are relatively expensive. Secondly, they seldom perform an effective data fusion using the multiple camera sources at an early stage of the processing pipeline. Occlusions and partial views make this second point very relevant in these scenarios. The proposal presented in this paper makes use of graph neural networks to merge the information acquired from m…
École Polytechnique Fédérale de Lausanne（洛桑联邦理工学院）；University of Bern（伯尔尼大学）；Second Spectrum Inc.（Second Spectrum公司）
Given an image sequence featuring a portion of a sports field filmed by a moving and uncalibrated camera, such as the one of the smartphones, our goal is to compute automatically in real time the focal length and extrinsic camera parameters for each image in the sequence without using a priori knowledges of the position and orientation of the camera. To this end, we propose a novel framework that combines accurate localization and robust identification of specific keypoints in the image by using a fully convolutional deep architecture. Our algorithm exploits both the field lines and the player…
Beyond Geo-localization: Fine-grained Orientation of Street-view Images by Cross-view Matching with Satellite Imagery with Supplementary Materials
National University of Singapore（新加坡国立大学）；Institute for Infocomm Research, A*STAR（新加坡科技研究局资讯通信研究院）；Grab Chronos S.R.L.（Grab Chronos有限责任公司）；Grabtaxi Holdings Pte. Ltd.（Grab出租车控股私人有限公司）
Heriot-Watt University（赫瑞瓦特大学）；The University of Edinburgh（爱丁堡大学）
The growing ubiquity of drones has raised concerns over the ability of traditional air-space monitoring technologies to accurately characterise such vehicles. Here, we present a CNN using a decision tree and ensemble structure to fully characterise drones in flight. Our system determines the drone type, orientation (in terms of pitch, roll, and yaw), and performs segmentation to classify different body parts (engines, body, and camera). We also provide a computer model for the rapid generation of large quantities of accurately labelled photo-realistic training data and demonstrate that this da…
This paper proposes minimal solvers that use combinations of imaged translational symmetries and parallel scene lines to jointly estimate lens undistortion with either affine rectification or focal length and absolute orientation. We use constraints provided by orthogonal scene planes to recover the focal length. We show that solvers using feature combinations can recover more accurate calibrations than solvers using only one feature type on scenes that have a balance of lines and texture. We also show that the proposed solvers are complementary and can be used together in a RANSAC-based estim…
MVL-Loc: Leveraging Vision-Language Model for Generalizable Multi-Scene Camera Relocalization
School of Automation Science and Engineering, South China University of Technology（自动化科学与工程学院，华南理工大学）；Thrust of Artificial Intelligence, The Hong Kong University of Science and Technology (Guangzhou)（人工智能方向，香港科学与技术大学（广州））
National Institute of Technology, Rourkela（鲁尔凯拉国家理工学院）
Vision-based pose estimation of Unmanned Aerial Vehicles (UAV) in unknown environments is a rapidly growing research area in the field of robot vision. The task becomes more complex when the only available sensor is a static single camera (monocular vision). In this regard, we propose a monocular vision assisted localization algorithm, that will help a UAV to navigate safely in indoor corridor environments. Always, the aim is to navigate the UAV through a corridor in the forward direction by keeping it at the center with no orientation either to the left or right side. The algorithm makes use …
$3$D structure recovery from a collection of $2$D images requires the estimation of the camera locations and orientations, i.e. the camera motion. For large, irregular collections of images, existing methods for the location estimation part, which can be formulated as the inverse problem of estimating $n$ locations $\mathbf{t}_1, \mathbf{t}_2, \ldots, \mathbf{t}_n$ in $\mathbb{R}^3$ from noisy measurements of a subset of the pairwise directions $\frac{\mathbf{t}_i - \mathbf{t}_j}{\|\mathbf{t}_i - \mathbf{t}_j\|}$, are sensitive to outliers in direction measurements. In this paper, we firstly p…
