Graphene, owing to its zero bandgap electronic structure, is promising as an absorption material for ultra-wideband photodetection applications. However, graphene-absorption based detectors inherently suffer from poor responsivity due to weak absorption and fast photocarrier recombination, limiting their viability for low intensity light detection. Here we use a graphene/WS$_2$/MoS$_2$ vertical heterojunction to demonstrate a highly sensitive photodetector, where the graphene layer serves dual purpose, namely as the light absorption layer, and also as the carrier conduction channel, thus maintaining the broadband nature of the photodetector. A fraction of the photoelectrons in graphene encounter ultra-fast inter-layer transfer to a floating monolayer MoS$_2$ quantum well providing strong quantum confined photogating effect. The photodetector shows a responsivity of $4.4\times 10^6$ A/W at 30 fW incident power, outperforming photodetectors reported till date where graphene is used as light absorption material by several orders. In addition, the proposed photodetector exhibits an extremely low noise equivalent power ($N\!E\!P$) of $<4$ fW/$\sqrt{Hz}$ and a fast response ($\sim$ milliseconds) with zero reminiscent photocurrent. The findings are attractive towards the demonstration of graphene-based highly sensitive, fast, broadband photodetection technology.
We develop ZnO/p-Si photodetectors by atomic layer deposition (ALD) of ZnO thin films on laser-microstructured silicon and we investigate their electrical and optical behavior, demonstrating high sensitivity and broadband operation. Microstructured p-type silicon was obtained by ns-laser irradiation in SF6 gas, which results in the formation of quasi-ordered and uniform microspikes on the silicon surface. The irradiated silicon contains sulfur impurities, which extend its absorbance to the near infrared. A thin film of ZnO was conformally deposited on the microstructured silicon substrates by …
We report vertically-illuminated, resonant cavity enhanced, graphene-Si Schottky photodetectors (PDs) operating at 1550nm. These exploit internal photoemission at the graphene-Si interface. To obtain spectral selectivity and enhance responsivity, the PDs are integrated with an optical cavity, resulting in multiple reflections at resonance, and enhanced absorption in graphene. Our devices have wavelength-dependent photoresponse with external (internal) responsivity~20mA/W (0.25A/W). The spectral-selectivity may be further tuned by varying the cavity resonant wavelength. Our devices pave the way…
Intensive efforts have been devoted to exploit novel optoelectronic devices based on two-dimensional (2D) transition-metal dichalcogenides (TMDCs) owing to their strong light-matter interaction and distinctive material properties. In particular, photodetectors featuring both high-speed and high-responsivity performance are of great interest for a vast number of applications such as high-data-rate interconnects operated at standardized telecom wavelengths. Yet, the intrinsically small carrier mobilities of TMDCs become a bottleneck for high-speed application use. Here, we present high-performan…
An ultraviolet (UV) photodetector employing the two-dimensional electron gas (2DEG) formed at the AlGaN/GaN interface as an interdigitated transducer (IDT) is characterized under optical stimulus. The 2DEG-IDT photodetector exhibits a record high normalized photocurrent-to-dark current ratio (NPDR, $6\times10^{14}$). In addition, we observe a high responsivity ($7,800$ A/W) and ultraviolet-visible rejection-ratio ($10^{6}$), among the highest reported values for any GaN photodetector architecture. We propose a gain mechanism to explain the high responsivity of this device architecture, which c…
We have fabricated black phosphorus photodetectors and characterized their full spectral responsivity. These devices, which are effectively in the bulk thin film limit, show broadband responsivity ranging from <400 nm to the ~3.8 $μ$m bandgap. In the visible, an intrinsic responsivity >7 A/W can be obtained due to internal gain mechanisms. By examining the full spectral response, we identify a sharp contrast between the visible and infrared behavior. In particular, the visible responsivity shows a large photoconductive gain and gate-voltge dependence, while the infrared responsivity is nearly …
We report on the demonstration of MoS2/GaN UV-visible photodetectors with high spectral responsivity both in UV and in visible regions as well as the observation of MoS2 band-edge in spectral responsivity. Multi-layer MoS2 flakes of thickness ~ 200 nm were exfoliated on epitaxial GaN-on-sapphire, followed by fabrication of detectors in a lateral Metal-Semiconductor-Metal (MSM) geometry with Ni/Au contacts which were insulated from the GaN layer underneath by Al2O3 dielectric. Devices exhibited distinct steps in spectral responsivity at 365 nm and at ~ 685 nm with a corresponding photo-to-dark …
We investigate waveguide-integrated plasmonic graphene photodetector operating based on the hot carrier photo-bolometric effect, which is characterized simultaneously by high responsivity on the scale of hundreds of AW-1 and high speed on the scale of 100s of GHz. We develop a theory of bolometric effect originating from the band nonparabolicity of graphene and estimate responsivity due to bolometric effect is shown to significantly surpass the responsivity of co-existing photo-conductive effect thus convincingly demonstrating the dominance of bolometric effect. Based on the theory we propose …
Graphene has extraordinary electro-optic properties and is therefore a promising candidate for monolithic photonic devices such as photodetectors. However, the integration of this atom-thin layer material with bulky photonic components usually results in a weak light-graphene interaction leading to large device lengths limiting electro-optic performance. In contrast, here we demonstrate a plasmonic slot graphene photodetector on silicon-on-insulator platform with high-responsivity given the 5 um-short device length. We observe that the maximum photocurrent, and hence the highest responsivity, …
Two-dimensional materials are attractive for constructing high-performance photonic chip-integrated photodetectors because of their remarkable electronic and optical properties and dangling-bond-free surfaces. However, the reported chip-integrated two-dimensional material photodetectors were mainly implemented with the configuration of metal-semiconductor-metal, suffering from high dark currents and low responsivities at high operation speed. Here, we report a van der Waals PN heterojunction photodetector, composed of p-type black phosphorous and n-type molybdenum telluride, integrated on a si…
We report a high-responsive hot-electron photodetector based on the integration of an Au-MoS$_2$ junction with a silicon nitride microring resonator (MRR) for detecting telecom-band light. The coupling of the evanescent field of the silicon nitride MRR with the Au-MoS$_2$ Schottky junction region enhances the hot-electron injection efficiency. The device exhibits a high responsivity of 154.6 mA W-1 at the wavelength of 1516 nm, and the moderately uniform responsivities are obtained over the wavelength range of 1500 nm-1630 nm. This MRR-enhanced MoS2 hot-electron photodetector offers possibilit…
Graphene has shown great potentials for high-speed photodetection. Yet, the responsivities of graphene-based high-speed photodetectors are commonly limited by the weak effective absorption of atomically thin graphene. Here, we propose and experimentally demonstrate a plasmonically enhanced waveguide-integrated graphene photodetector. The device which combines a 6 micron long layer of graphene with field-enhancing nano-sized metallic structures, demonstrates a high external responsivity of 0.5 A/W and a fast photoresponse way beyond 110 GHz. The high efficiency and fast response of the device e…
In integrated photonics, specific wavelengths are preferred such as 1550 nm due to low-loss transmission and the availability of optical gain in this spectral region. For chip-based photodetectors, layered two-dimensional (2D) materials bear scientific and technologically-relevant properties leading to strong light-matter-interaction devices due to effects such as reduced coulomb screening or excitonic states. However, no efficient photodetector in the telecommunication C-band using 2D materials has been realized yet. Here, we demonstrate a MoTe2-based photodetector featuring strong photorespo…
Defects are detrimental for optoelectronics devices, such as stacking faults can form carrier-transportation barriers, and foreign impurities (Au) with deep-energy levels can form carrier traps and non-radiative recombination centers. Here, we first developed self-catalyzed p-type GaAs nanowires (NWs) with pure zinc blende (ZB) structure, and then fabricated photodetector made by these NWs. Due to absence of stacking faults and suppression of large amount of defects with deep energy levels, the photodetector exhibits room-temperature high photo responsivity of 1.45 x 105 A W^-1 and excellent s…
We appraise a waveguide-integrated plasmonic graphene photodetector based on the hot carrier photo-bolometric effect, with performance characterized simultaneously by high responsivity, on the scale of hundreds of AW-1, and high speed on the scale of 100s of GHz. Performance evaluation is based on a theory of bolometric effect originating from the band nonparabolicity of graphene. Results compare favorably with the state-of-the-art plasmonic bolometric photodetectors, predicting up to two orders of magnitude increase in a responsivity while keeping speed on the same level, defined by the elect…
Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the low responsivity - electrical output per optical input - of GPDs compared to conventional PDs. Here we overcome this shortfall by integrating a photo-thermoelectric GPD with a Si microring resonator. Under critical coupling, we achieve $>$90% light absor…
Silicon photonics is being extended from the near-infrared (near-IR) window of 1.3-1.5 μm for optical fiber communications to the mid-infrared (mid-IR) wavelength-band of 2 μm or longer for satisfying the increasing demands in many applications. Mid-IR waveguide photodetectors on silicon have attracted intensive attention as one of the indispensable elements for various photonic systems. Previously high-performance waveguide photodetectors on silicon were realized for the near-IR window of 1.3-1.5 μm by introducing another semiconductor material (e.g., Ge, and III-V compounds) in the active re…
We present a compact on-chip resonator enhanced silicon-MSM photodetector in $850$ $nm$ wavelength band for communication and lab-on-chip bio-sensing applications. We report the highest responsivity of 0.81 A/W for a 5 $μm$ long device. High responsivity is achieved by integrating the detector in a silicon nitride ring resonator. The resonance offers 100X responsivity improvement over a single-pass photodetector due to cavity enhancement. We also present a detailed study of the high-speed response of the cavity and single-pass detector. We report an electro-optic bandwidth of 7.5 GHz measured …
Two dimensional (2D) materials exhibit superior properties in electronic and optoelectronic fields. The wide demand for high performance optoelectronic devices promotes the exploration of diversified 2D materials. Recently, 2D covalent organic frameworks (COFs) have emerged as next-generation layered materials with predesigned pi electronic skeletons and highly ordered topological structures, which are promising for tailoring their optoelectronic properties. However, COFs are usually produced as solid powders due to anisotropic growth, making them unreliable to integrate into devices. Here, by…
Graphene has emerged as an ultrafast optoelectronic material for on-chip photodetector applications. The 2D nature of graphene enables its facile integration with complementary metal-oxide semiconductor (CMOS) microelectronics and silicon photonics, yet graphene absorbs only $\sim$2.3% of light. Plasmonic metals can enhance the responsivity of graphene photodetectors, but may result in CMOS-incompatible devices, depending on the choice of metal. Here, we propose a plasmon-enhanced photothermoelectric graphene detector using CMOS-compatible titanium nitride (TiN) on the silicon-on-insulator (SO…
Organic photodetectors (OPDs) possess bright prospects in applications of medical imaging and wearable electronics due to the advantages such as low cost, good biocompatibility, and good flexibility. Photomultiplication OPDs (PM-OPDs) enabled by the trap-assisted carrier tunneling injection effect exhibit external quantum efficiencies far greater than unity, thus the acquired responsivities are extremely high. However, the reported PM-OPDs with high responsivity performances are all accompanied by high dark currents due to the introduction of carrier traps, which inevitably results in inferior…
In this report, we demonstrate dual band vertical heterojunction photodetector realized by integrating α-In2Se3 with p-type GaN. Flakes of ~ 110 nm thickness were exfoliated on MOCVD grown p-GaN on silicon substrate. Devices showed two distinct detection peaks in spectral responsivity, one at 365 nm and another at 850 nm, corresponding to band edges of GaN and α-In2Se3 respectively, with considerable rejection in visible spectrum. Normalised responsivity values were found out to be ~70 mA/W at both 365 nm and 850 nm for the bias of -3V along with photo-to-dark current ratio of ~665 and ~75 in …
The combination of graphene with semiconductor materials in heterostructure photodetectors, has enabled amplified detection of femtowatt light signals using micron-scale electronic devices. Presently, the speed of such detectors is limited by long-lived charge traps and impractical strategies, e.g. the use of large gate voltage pulses, have been employed to achieve bandwidths suitable for applications, such as video-frame-rate imaging. Here, we report atomically thin graphene-WS$_2$ heterostructure photodetectors encapsulated in an ionic polymer, which are uniquely able to operate at bandwidth…
Free-space circularly polarized light (CPL) detection, requiring polarizers and waveplates, has been well established, while such spatial degree of freedom is unfortunately absent in integrated on-chip optoelectronics. So far, those reported filterless CPL photodetectors suffer from the intrinsic small discrimination ratio, vulnerability to the non-CPL field components, and low responsivity. Here, we report a distinct paradigm of geometric photodetectors in mid-infrared exhibiting colossal discrimination ratio, close-to-perfect CPL-specific response, a zero-bias responsivity of 392 V/W at room…
We report on the efficient photodetection (PD) properties of graphene based p-i-n photodetector, where all the three layers are either single or multilayer graphene sheets. We report the bandwidth and responsivity performance of the device. This simple structure paves the way for the next generation flexible wireless communication systems. A theoretical model is used to study the carrier distribution and current in a graphene based p-i-n photodetector system.
Graphene-based photodetectors, taking advantage of high carrier mobility and broadband absorption in graphene, have recently experienced rapid development. However, their performances with respect to the responsivity and bandwidth are still limited by either weak light-graphene interaction or large resistance-capacitance product. Here, we demonstrate a waveguide coupled integrated graphene plasmonic photodetector on the silicon-on-insulator platform. Benefiting from plasmonic enhanced graphene-light interactions and subwavelength confinement of the optical energy, we present a small-footprint …
The epitaxial growth of two-dimensional (2D) $β-In_2Se_3$ material was obtained over 2-inches c-sapphire wafers using molecular beam epitaxy (MBE). Excellent quality of thick (90 nm) and very thin films, down to two quintuple layers (2 nm), was confirmed by x-ray diffraction (XRD), Raman spectroscopy, and aberration-corrected scanning transmission electron microscopy (ac-STEM). Wafer-scale fabrication of photodetectors based on five quintuple layers was produced using photolithography and other standard semiconductor processing methods. The photodetectors exhibit responsivity of 3 mA/W, peak s…
We demonstrate experimentally the realization and the characterization of a chip scale integrated photodetector for the visible and the near infrared spectral regime based on the integration of a MoSe2/WS2 heterojunction on top of a silicon nitride waveguide. This configuration achieves high responsivity of ~1 A/W at the wavelength of 780 nm (indicating an internal gain mechanism), while suppressing the dark current to the level of ~50 pA, much lower as compared to a reference sample of just MoSe2 without WS2. We have measured the power spectral density of the dark current to be as low as ~1x1…
Organo-lead halide perovskite materials have opened up a great opportunity to develop high performance photodetectors because of their superior optoelectronic properties. The main issue with perovskite-only photodetector is severe carrier recombination. Integration of perovskite with high-conductive materials such as graphene or transition metal sulfides certainly improved the photoresponsivity. However, achieving high overall performance remains a challenge. Here, an improved photodetector is constructed by perovskite quantum dots (QDs) and atomic layer deposited (ALD) ultrathin TiO2 films. T…
We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneously guide a surface plasmon polariton gap-mode. This increases light-graphene interaction and optical absorption and results in an increased electronic temperature and steeper temperature gradient acr…
We present a graphene photodetector for telecom applications based on a silicon photonic crystal defect waveguide. The photonic structure is used to confine the propagating light in a narrow region in the graphene layer to enhance light-matter interaction. Additionally, it is utilized as split-gate electrode to create a pn-junction in the vicinity of the optical absorption region. The photonic crystal defect waveguide allows for optimal photo-thermoelectric conversion of the occurring temperature profile in graphene into a photovoltage due to additional silicon slabs on both sides of the waveg…
Deep understanding of plasmonic nanoparticles (PNPs)-light interaction over semiconductors surface shows great promises in enhancing their optoelectronic devices efficiency beyond the conventional limit. However, PNP-light interaction critically decided by the distribution density of PNPs over the semiconductor surface which is not entirely understood. Here, a systematic study depicting how the interparticle gap between Silver (Ag) NPs influences the performance of the \b{eta}-Ga2O3 based solar-blind photodetector. Interestingly, a remarkable transition is observed, where the varied interparti…
A fast silicon-graphene hybrid plasmonic waveguide photodetectors beyond 1.55 μm is proposed and realized by introducing an ultra-thin wide silicon-on-insulator ridge core region with a narrow metal cap. With this novel design, the light absorption in graphene is enhanced while the metal absorption loss is reduced simultaneously, which helps greatly improve the responsivity as well as shorten the absorption region for achieving fast responses. Furthermore, metal-graphene-metal sandwiched electrodes are introduced to reduce the metal-graphene contact resistance, which is also helpful for improv…
We report on the integration of large area CVD grown single- and bilayer graphene transparent conductive electrodes (TCEs) on amorphous silicon multispectral photodetectors. The broadband transmission of graphene results in 440% enhancement of the detectors' spectral response in the ultraviolet (UV) region at λ = 320 nm compared to reference devices with conventional aluminum doped zinc oxide (ZnO:Al) electrodes. The maximum responsivity of the multispectral photodetectors can be tuned in their wavelength from 320 nm to 510 nm by an external bias voltage, allowing single pixel detection of UV …
This paper presents the design, the fabrication and the characterization of Schottky graphene/silicon photodetectors, operating at both 2 micron and room temperature. The graphene/silicon junction has been carefully: characterized device shows a non ideal behaviour with the increasing temperature and the interfacial trap density has been measured as 1.1x10^14 eV^-1cm^-2. Photodetectors are characterized by an internal (external) responsivity of 10.3 mA/W (0.16 mA/W) in an excellent agreement with the theory. Our devices pave the way for developing hybrid graphene-Si free-space illuminated PDs …
We propose an on-chip CMOS compatible graphene plasmonic photodetector based on the photo-thermoelectric effect (PTE) that occurs across an entire homogeneous graphene channel. The proposed photodetector incorporates the long-range dielectric-loaded surface plasmon polariton (LR-DLSPP) waveguide with a metal stripe serving simultaneously as a plasmon supporting metallic material and one of the metal electrodes. Large in-plane component of the transverse magnetic (TM) plasmonic mode can couple efficiently to the graphene causing large temperature increases across an entire graphene channel with…
Plasmon excitations in metallic nanostructures can decay directly into dynamic electron-hole pairs (EHPs), exploitable for photocurrent generation. This approach has extensively been employed to develop nanoplasmonic light-sensing devices with significant responsivity and quantum efficiency. Of particular interest is infrared plasmonic photodetectors with a wide range of technological applications, including spectroscopy, biosensing, and surveillance. This Review discusses fundamentals, recent advances, and trending mechanisms in the understanding and applications of plasmon-enhanced photocurr…
Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-fabricate perovskite-on-paper photodetectors with a broadband-tunable spectral response. Fr…
We study the operation of infrared photodetectors based on van der Waals heterostructures with the multiple graphene layers (GLs) and n-type emitter and collector contacts. The operation of such GL infrared photodetectors (GLIPs) is associated with the photoassisted escape of electrons from the GLs into the continuum states in the conduction band of the barrier layers due to the interband photon absorption, the propagation of these electrons and the electrons injected from the emitter across the heterostructure and their collection by the collector contact. The space charge of the holes trappe…
Universal reconstructive polarimetry with graphene-metal infrared photodetectors
Moscow Institute of Physics and Technology（莫斯科物理技术学院）；Programmable Functional Materials Lab, Center for Neurophysics and Neuromorphic Technologies（可编程功能材料实验室，神经物理与类脑技术中心）；Department of Materials Science and Engineering, National University of Singapore（新加坡国立大学材料科学与工程系）；School of Materials Science and（材料科学与）
Graphene-based photodetectors have shown responsivities up to 10$^8$A/W and photoconductive gains up to 10$^{8}$ electrons per photon. These photodetectors rely on a highly absorbing layer in close proximity of graphene, which induces a shift of the graphene chemical potential upon absorption, hence modifying its channel resistance. However, due to the semi-metallic nature of graphene, the readout requires dark currents of hundreds of $μ$A up to mA, leading to high power consumption needed for the device operation. Here we propose a novel approach for highly responsive graphene-based photodete…
Two-dimensional (2D) transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response speed and responsivity (R) and large dark current. Here, a dual-gated (DG) MoS2 phototransistor operating based on the interface coupling effect (ICE) is demonstrated. By simultaneously applying a negativ…
Graphene / silicon (G/Si) heterostructures have been studied extensively in the past years for applications such as photodiodes, photodetectors and solar cells, with a growing focus on efficiency and performance. Here, a specific contact pattern scheme with interdigitated Schottky and graphene/insulator/silicon (GIS) structures is explored to experimentally demonstrate highly sensitive G/Si photodiodes. With the proposed design, an external quantum efficiency (EQE) of > 80 % is achieved for wavelengths ranging from 380 to 930 nm. A maximum EQE of 98% is observed at 850 nm, where the responsivi…
Broadband infrared photodetectors have profound importance in diverse applications including security, gas sensing, bioimaging, spectroscopy for food quality, and recycling, just to name a few. Yet, these applications can currently be served by expensive epitaxially grown photodetectors, limiting their market potential and social impact. The use of colloidal quantum dots (CQDs) and 2D-materials in a hybrid layout is an attractive alternative to design low-cost CMOS-compatible infrared photodetectors. However, the spectral sensitivity of these conventional hybrid detectors has been restricted t…
Here, we propose titanium nitride (TiN) as an alternative plasmonic material for an on-chip silicon plasmonic Schottky photodetector that is based on an internal photoemission process and operating at telecom wavelengths. The examined structure employs an asymmetric metal-semiconductor-metal waveguide structure with one of the electrodes being gold and the second either gold, titanium or titanium nitride. Apart from the excellent optical properties desired for this type of photodetector such as high absorption losses and reasonably high real part of the permittivity, titanium nitride is a CMOS…
Flowing water can be used as an energy source for generators, providing a major part of the energy for daily life. However, water is rarely used for information or electronic devices. Herein, we present the feasibility of a polarized liquid-triggered photodetector in which polarized water is sandwiched between graphene and semiconductor. Due to the polarization and depolarization processes of water molecular under the driven of photogenerated carriers, a photo-sensitive current can be repeatably produced, resulting in a high-performance photodetector. The response wavelength of the photodetect…
We report on the study of optical properties of mist CVD grown alpha Gallium oxide with the observation of excitonic absorption in spectral responsivity measurements. 163 nm of Gallium oxide was grown on sapphire using Gallium acetylacetonate as the starting solution at a substrate temperature of 450 deg C. The film was found to be crystalline and of alpha phase with an on axis full width at half maximum of 92 arcsec as confirmed from X ray diffraction scans. The Taucs plot extracted from absorption spectroscopy exhibited two transitions in the UV regime at 5.3 eV and 5.6 eV, corresponding to …
Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a nitrogen cooled superconducting transition edge sensor, which shows orders of magnitude improved performance characteristics of any superconducting detector operated above 77K, with a responsivity of 9.61x10^4 V/W, noise equi…
Recent progress in the synthesis of highly stable, eco-friendly, cost-effective transition metal-dichalcogenides (TMDC) quantum dots (QDs) with their broadband absorption spectrum and wavelength selectivity features have led to their increasing use in broadband photodetectors. With the solution based processing, we demonstrate a super large (~ 0.75 mm^2), UV-Vis broadband (365-633 nm), phototransistor made of WS_2 QDs decorated CVD graphene as active channel with extraordinary stability and durability in ambient condition (without any degradation of photocurrent till 4 months after fabrication…
Compact optical detectors with fast binary photoswitching over a broad range of wavelength are essential as an interconnect for any light-based parallel, real-time computing. Despite of the tremendous technological advancements yet there is no such single device available that meets the specifications. Here we report a multifunctional self-powered high-speed ultrabroadband (250-1650 nm) photodetector based on g-C3N4/Si hybrid 2D/3D structure. The device shows a novel binary photoswitching (change in current from positive to negative) in response to OFF/ON light illumination at small forward bi…
